The β-Barrel Assembly Machinery Complex

Antibiotic adjuvants against multidrug-resistant Gram-negative bacteria: important component of future antimicrobial therapy

The swift emergence and propagation of multidrug-resistant (MDR) bacterial pathogens constitute a tremendous global health crisis. Among these pathogens, the challenge of antibiotic resistance in Gram-negative bacteria is particularly pressing due to their distinctive structure, such as highly impermeable outer membrane, overexpressed efflux pumps, and mutations. Several strategies have been documented to combat MDR Gram-negative bacteria, including the structural modification of existing antibiotics, the development of antimicrobial adjuvants, and research on novel targets that MDR bacteria are sensitive to. Drugs functioning as adjuvants to mitigate resistance to existing antibiotics may play a pivotal role in future antibacterial therapy strategies. In this review, we provide a brief overview of potential antibacterial adjuvants against Gram-negative bacteria and their mechanisms of action, and discuss the application prospects and potential for bacterial resistance to these adjuvants, along with strategies to reduce this risk.

Exploring Nature’s Treasure to Inhibit β-Barrel Assembly Machinery of Antibiotic Resistant Bacteria: An In silico Approach

Background:

The development of antibiotic resistance in bacteria is a matter of global concern due to the exceptionally high morbidity and mortality rates. The outer membrane of most gram-negative bacteria acts as a highly efficient barrier and blocks the entry of the majority of antibiotics, making them ineffective. The Bam complex, β-barrel assembly machinery complex, contains five subunits (BamA, B, C, D, E), which plays a vital role in folding and inserting essential outer membrane proteins into the membrane, thus maintaining outer membrane integrity. BamA and BamD are essential subunits to fulfill this purpose. Therefore, targeting this complex to treat antibiotic resistance can be an incredibly effective approach. Natural bacterial pigments like violacein, phytochemicals like withanone, semasin, and several polyphenols have often been reported for their effective antibiotic, antioxidant, anti-inflammatory, antiviral, and anti-carcinogenic properties.

Objective:

Structural inhibition of the Bam complex by natural compounds can provide safe and effective treatment for antibiotic resistance by targeting outer membrane integrity.

Methods:

In-silico ADMET and molecular docking analysis was performed with ten natural compounds, namely violacein, withanone, sesamin, resveratrol, naringenin, quercetin, epicatechin, gallic acid, ellagic acid, and galangin, to analyse their inhibitory potential against the Bam complex.

Results:

Docking complexes of violacein gave high binding energies of -10.385 and -9.46 Kcal/mol at C and D subunits interface and at A subunits of the Bam complex, respectively.

Conclusion:

Henceforth, violacein can be an effective antibiotic against to date reported resistant gram-negative bacteria by inhibiting the Bam complex of their outer membrane. Therefore the urgent need for exhaustive research in this concern is highly demanded.

Defects in The First Step of Lipoprotein Maturation Underlie The Synthetic Lethality of Escherichia coli Lacking The Inner Membrane Proteins YciB And DcrB

Nearly a quarter of the Escherichia coli genome encodes for inner membrane proteins of which approximately a third have unassigned or poorly understood function. We had previously demonstrated that the synergy between the functional roles of the inner membrane-spanning YciB and the inner membrane lipoprotein DcrB, is essential in maintaining cell envelope integrity. In yciB dcrB cells, the abundant outer membrane lipoprotein, Lpp, mislocalizes to the inner membrane where it forms toxic linkages to peptidoglycan. Here, we report that the aberrant localization of Lpp in this double mutant is due to inefficient lipid modification at the first step in lipoprotein maturation. Both Cpx and Rcs signaling systems are upregulated in response to the envelope stress. The phosphatidylglycerol-pre-prolipoprotein diacylglyceryl transferase, Lgt, catalyzes the initial step in lipoprotein maturation. Our results suggest that the attenuation in Lgt-mediated transacylation in the double mutant is not a consequence of lowered phosphatidylglycerol levels. Instead, we posit that altered membrane fluidity, perhaps due to changes in lipid homeostasis, may lead to the impairment in Lgt function. Consistent with this idea, a dcrB null is not viable when grown at low temperatures, conditions which impact membrane fluidity. Like the yciB dcrB double mutant, dcrB null-mediated toxicity can be overcome in distinct ways - by increased expression of Lgt, deletion of lpp, or removal of Lpp-peptidoglycan linkages. The last of these events leads to elevated membrane vesiculation and lipid loss, which may, in turn, impact membrane homeostasis in the double mutant.Importance A distinguishing feature of Gram-negative bacteria is their double-membraned cell envelope which presents a formidable barrier against environmental stress. In E. coli, more than a quarter of the cellular proteins reside at the inner membrane but about a third of these proteins are functionally unassigned or their function is incompletely understood. Here, we show that the synthetic lethality underlying the inactivation of two inner membrane proteins, a small integral membrane protein YciB, and a lipoprotein, DcrB, results from the attenuation of the first step of lipoprotein maturation at the inner membrane. We propose that these two inner membrane proteins YciB and DcrB play a role in membrane homeostasis in E. coli and related bacteria.

Molecular determinants of surface colonisation in diarrhoeagenic Escherichia coli (DEC): from bacterial adhesion to biofilm formation

Escherichia coli is primarily known as a commensal colonising the gastrointestinal tract of infants very early in life but some strains being responsible for diarrhoea, which can be especially severe in young children. Intestinal pathogenic E. coli include six pathotypes of diarrhoeagenic E. coli (DEC), namely, the (i) enterotoxigenic E. coli, (ii) enteroaggregative E. coli, (iii) enteropathogenic E. coli, (iv) enterohemorragic E. coli, (v) enteroinvasive E. coli and (vi) diffusely adherent E. coli. Prior to human infection, DEC can be found in natural environments, animal reservoirs, food processing environments and contaminated food matrices. From an ecophysiological point of view, DEC thus deal with very different biotopes and biocoenoses all along the food chain. In this context, this review focuses on the wide range of surface molecular determinants acting as surface colonisation factors (SCFs) in DEC. In the first instance, SCFs can be broadly discriminated into (i) extracellular polysaccharides, (ii) extracellular DNA and (iii) surface proteins. Surface proteins constitute the most diverse group of SCFs broadly discriminated into (i) monomeric SCFs, such as autotransporter (AT) adhesins, inverted ATs, heat-resistant agglutinins or some moonlighting proteins, (ii) oligomeric SCFs, namely, the trimeric ATs and (iii) supramolecular SCFs, including flagella and numerous pili, e.g. the injectisome, type 4 pili, curli chaperone-usher pili or conjugative pili. This review also details the gene regulatory network of these numerous SCFs at the various stages as it occurs from pre-transcriptional to post-translocational levels, which remains to be fully elucidated in many cases.

Decorating the surface of Escherichia coli with bacterial lipoproteins: a comparative analysis of different display systems

Background

The display of recombinant proteins on cell surfaces has a plethora of applications including vaccine development, screening of peptide libraries, whole-cell biocatalysts and biosensor development for diagnostic, industrial or environmental purposes. In the last decades, a wide variety of surface display systems have been developed for the exposure of recombinant proteins on the surface of Escherichia coli, such as autotransporters and outer membrane proteins.

Results

In this study, we assess three approaches for the surface display of a panel of heterologous and homologous mature lipoproteins in E. coli: four from Neisseria meningitidis and four from the host strain that are known to be localised in the inner leaflet of the outer membrane. Constructs were made carrying the sequences coding for eight mature lipoproteins, each fused to the delivery portion of three different systems: the autotransporter adhesin involved in diffuse adherence-I (AIDA-I) from enteropathogenic E. coli, the Lpp’OmpA chimaera and a truncated form of the ice nucleation protein (INP), InaK-NC (N-terminal domain fused with C-terminal one) from Pseudomonas syringae. In contrast to what was observed for the INP constructs, when fused to the AIDA-I or Lpp’OmpA, most of the mature lipoproteins were displayed on the bacterial surface both at 37 and 25 °C as demonstrated by FACS analysis, confocal and transmission electron microscopy.

Conclusions

To our knowledge this is the first study that compares surface display systems using a number of passenger proteins. We have shown that the experimental conditions, including the choice of the carrier protein and the growth temperature, play an important role in the translocation of mature lipoproteins onto the bacterial surface. Despite all the optimization steps performed with the InaK-NC anchor motif, surface exposure of the passenger proteins used in this study was not achieved. For our experimental conditions, Lpp’OmpA chimaera has proved to be an efficient surface display system for the homologous passenger proteins although cell lysis and phenotype heterogeneity were observed. Finally, AIDA-I was found to be the best surface display system for mature lipoproteins (especially heterologous ones) in the E. coli host strain with no inhibition of growth and only limited phenotype heterogeneity.

Lectin-Like Bacteriocins

Bacteria produce a diverse array of antagonistic compounds to restrict growth of microbial rivals. Contributing to this warfare are bacteriocins: secreted antibacterial peptides, proteins and multi-protein complexes. These compounds typically eliminate competitors closely related to the producer. Lectin-like bacteriocins (LlpAs) constitute a distinct class of such proteins, produced by Pseudomonas as well as some other proteobacterial genera. LlpAs share a common architecture consisting of two B-lectin domains, followed by a short carboxy-terminal extension. Two surface-exposed moieties on susceptible Pseudomonas cells are targeted by the respective lectin modules. The carboxy-terminal domain binds D-rhamnose residues present in the lipopolysaccharide layer, whereas the amino-terminal domain interacts with a polymorphic external loop of the outer-membrane protein insertase BamA, hence determining selectivity. The absence of a toxin-immunity module as found in modular bacteriocins and other polymorphic toxin systems, hints toward a novel mode of killing initiated at the cellular surface, not requiring bacteriocin import. Despite significant progress in understanding the function of LlpAs, outstanding questions include the secretion machinery recruited by lectin-like bacteriocins for their release, as well as a better understanding of the environmental signals initiating their expression.

Hitting with a BAM: Selective Killing by Lectin-Like Bacteriocins

Lectin-like bacteriocins (LlpAs) are secreted by proteobacteria and selectively kill strains of their own or related species, and they are composed of two B-lectin domains with divergent sequences. In Pseudomonas spp., initial binding of these antibacterial proteins to cells is mediated by the carboxy-terminal domain through d-rhamnose residues present in the common polysaccharide antigen of their lipopolysaccharide, whereas the amino-terminal domain accounts for strain selectivity of killing. Here, we show that spontaneous LlpA-resistant mutants carry mutations in one of three surface-exposed moieties of the essential β-barrel outer membrane protein insertase BamA, the core component of the BAM complex. Polymorphism of this loop in different Pseudomonas groups is linked to LlpA susceptibility, and targeted cells all share the same signature motif in this loop. Since heterologous expression of such a bamA gene confers LlpA susceptibility upon a resistant strain, BamA represents the primary bacteriocin selectivity determinant in pseudomonads. Contrary to modular bacteriocins that require uptake via the Tol or Ton system, parasitism of BamA as an LlpA receptor advocates a novel bacteriocin killing mechanism initiated by impairment of the BAM machinery.

Bacteria secrete a variety of molecules to eliminate microbial rivals. Bacteriocins are a pivotal group of peptides and proteins that assist in this fight, specifically killing related bacteria. In Gram-negative bacteria, these antibacterial proteins often comprise distinct domains for initial binding to a target cell’s surface and subsequent killing via enzymatic or pore-forming activity. Here, we show that lectin-like bacteriocins, a family of bacteriocins that lack the prototypical modular toxin architecture, also stand out by parasitizing BamA, the core component of the outer membrane protein assembly machinery. A particular surface-exposed loop of BamA, critical for its function, serves as a key discriminant for cellular recognition, and polymorphisms in this loop determine whether a strain is susceptible or immune to a particular bacteriocin. These findings suggest a novel mechanism of contact-dependent killing that does not require cellular uptake. The evolutionary advantage of piracy of an essential cellular compound is highlighted by the observation that contact-dependent growth inhibition, a distinct antagonistic system, can equally take advantage of this receptor.

Statistically derived asymmetric membrane potentials from α-helical and β-barrel membrane proteins

Modeling membrane protein (MP) folding, insertion, association and their interactions with other proteins, lipids, and drugs requires accurate transfer free energies (TFEs). Various TFE scales have been derived to quantify the energy required or released to insert an amino acid or protein into the membrane. Experimental measurement of TFEs is challenging, and only few scales were extended to depth-dependent energetic profiles. Statistical approaches can be used to derive such potentials; however, this requires a sufficient number of MP structures. Furthermore, MPs are tightly coupled to bilayers that are heterogeneous in terms of lipid composition, asymmetry, and protein content between organisms and organelles. Here we derived asymmetric implicit membrane potentials from β-barrel and α-helical MPs and use them to predict topology, depth and orientation of proteins in the membrane. Our data confirm the ‘charge-outside’ and ‘positive-inside’ rules for β-barrels and α-helical proteins, respectively. We find that the β-barrel profiles have greater asymmetry than the ones from α-helical proteins, as a result of the different membrane architecture of gram-negative bacterial outer membranes and the existence of lipopolysaccharide in the outer leaflet. Our data further suggest that pore-facing residues in β-barrels have a larger contribution to membrane insertion and stability than previously suggested.

Energetics of side-chain partitioning of β-signal residues in unassisted folding of a transmembrane β-barrel protein

The free energy of water-to-interface amino acid partitioning is a major contributing factor in membrane protein folding and stability. The interface residues at the C terminus of transmembrane β-barrels form the β-signal motif required for assisted β-barrel assembly in vivo but are believed to be less important for β-barrel assembly in vitro. Here, we experimentally measured the thermodynamic contribution of all 20 amino acids at the β-signal motif to the unassisted folding of the model β-barrel protein PagP. We obtained the partitioning free energy for all 20 amino acids at the lipid-facing interface (ΔΔG⁰_w,i(φ)) and the protein-facing interface (ΔΔG⁰_w,i(π)) residues and found that hydrophobic amino acids are most favorably transferred to the lipid-facing interface, whereas charged and polar groups display the highest partitioning energy. Furthermore, the change in non-polar surface area correlated directly with the partitioning free energy for the lipid-facing residue and inversely with the protein-facing residue. We also demonstrate that the interface residues of the β-signal motif are vital for in vitro barrel assembly, because they exhibit a side chain–specific energetic contribution determined by the change in nonpolar accessible surface. We further establish that folding cooperativity and hydrophobic collapse are balanced at the membrane interface for optimal stability of the PagP β-barrel scaffold. We conclude that the PagP C-terminal β-signal motif influences the folding cooperativity and stability of the folded β-barrel and that the thermodynamic contributions of the lipid- and protein-facing residues in the transmembrane protein β-signal motif depend on the nature of the amino acid side chain.