Graft-artery junctions: design optimization and CAD development

IN VITRO INVESTIGATION OF DYNAMIC VISCOELASTIC PROPERTIES OF HUMAN SAPHENOUS VEINS USING A CARDIOVASCULAR SIMULATOR

Coronary bypass surgery is a usual therapy for vessel-related diseases as several thousand of this kind of surgery are reported annually. In this surgery, saphenous vein, internal mammary artery or radial artery are grafted to replace coronary vessels. This research aims to evaluate viscoelastic properties of human saphenous vein vessel wall used in bypass surgery using a device designed in our laboratory. The most important feature of this device is its ability to simulate physiological conditions which exist inside humans’ bodies. During experiments, variations in both vessel diameter and exerted pressure are recorded simultaneously. After performing measurements at frequencies near to heart beat frequency and finding loss and storage modulus for each frequency, it is found that, in the scanned frequency range, Kelvin model is the best approach to assess viscoelastic behavior of vessels. Remarkably, the results found in this research are in agreement with literature.

WAVE PROPAGATION IN A 1D FLUID DYNAMICS MODEL USING PRESSURE-AREA MEASUREMENTS FROM OVINE ARTERIES

This study considers a 1D fluid dynamics arterial network model with 14 vessels developed to assimilate ex vivo 0D temporal data for pressure-area dynamics in individual vessel segments from 11 male Merino sheep. A 0D model was used to estimate vessel wall parameters in a two-parameter elastic model and a four-parameter Kelvin viscoelastic model. This was done using nonlinear optimization minimizing the least squares error between model predictions and measured cross-sectional areas. Subsequently, estimated values for elastic stiffness and unstressed area were related to construct a nonlinear relationship. This relation was used in the network model. A 1D single vessel model of the aorta was then developed and used to estimate the inflow profile and parameters for total resistance and compliance for the downstream network and to demonstrate effects of incorporating viscoelasticity in the arterial wall. Lastly, the extent to which vessel wall parameters estimated from ex vivo data can be used to realistically simulate pressure and area in a vessel network was evaluated. Elastic wall parameters in the network simulations were found to yield pressure-area relationships across all vessel locations and sheep that were in ranges comparable to those in the ex vivo data.

Fluid structure interaction (FSI) simulation of the left ventricle (LV) during the early filling wave (E-wave), diastasis and atrial contraction wave (A-wave)

In this paper, the hemodynamic characteristics inside a physiologically correct three-dimensional LV model using fluid structure interaction scheme are examined under various heart beat conditions during early filling wave (E-wave), diastasis and atrial contraction wave (A-wave). The time dependent and incompressible viscous fluid, nonlinear viscous fluid and the stress tensor equations are coupled with the full Navier-Stoke's equations together with the Arbitrary Lagrangian-Eulerian and elasticity in the solid domain are used in the analysis. The results are discussed in terms of the variation in the intraventricular pressure, wall shear stress (WSS) and the fluid flow patterns inside the LV model. Moreover, changes in the magnitude of displacements on the LV are also observed during diastole period. The results obtained demonstrate that the magnitude of the intraventricle pressure is found higher in the basal region of the LV during the beginning of the E-wave and A-wave, whereas the Ip is found much higher in the apical region when the flow propagation is in peak E-wave, peak A-wave and diastasis. The magnitude of the pressure is found to be 5.4E2 Pa during the peak E-wave. Additionally, WSS elevates with the rise in the E-wave and A-wave but the magnitude decreases during the diastasis phase. During the peak E-wave, maximum WSS is found to be 5.7 Pa. Subsequent developments, merging and shifting of the vortices are observed throughout the filling wave. Formations of clockwise vortices are evident during the peak E-wave and at the onset of the A-wave, but counter clockwise vortices are found at the end of the diastasis and at the beginning of the A-wave. Moreover, the maximum magnitude of the structural displacement is seen in the ventricle apex with the value of 3.7E-5 m.

Intelligent freeform manufacturing of complex organs

Different from the existing tissue engineering strategies, rapid prototyping (RP) techniques aim to automatically produce complex organs directly from computer-aided design freeform models with high resolution and sophistication. Analogous to building a nuclear power plant, cell biology (especially, renewable stem cells), implantable biomaterials, tissue engineering, and single/double/four nozzle RP techniques currently enable researchers in the field to realize a part of the task of complex organ manufacturing. To achieve this multifaceted undertaking, a multi-nozzle rapid prototyping system which can simultaneously integrate an anti-suture vascular system, multiple cell types, and a cocktail of growth factors in a construct should be developed. This article reviews the pros and cons of the existing cell-laden RP techniques for complex organ manufacturing. It is hoped that with the comprehensive multidisciplinary efforts, the implants can virtually replace the functions of a solid internal organ, such as the liver, heart, and kidney.