Single molecule approaches for studying spliceosome assembly and catalysis

Dynamics and Evolutionary Conservation of B Complex Protein Recruitment During Spliceosome Activation

Spliceosome assembly and catalytic site formation (called activation) involve dozens of protein and snRNA binding and unbinding events. The B-complex specific proteins Prp38, Snu23, and Spp381 have critical roles in stabilizing the spliceosome during conformational changes essential for activation. While these proteins are conserved, different mechanisms have been proposed for their recruitment to spliceosomes. To visualize recruitment directly, we used Colocalization Single Molecule Spectroscopy (CoSMoS) to study the dynamics of Prp38, Snu23, and Spp381 during splicing in real time. These proteins bind to and release from spliceosomes simultaneously and are likely associated with one another. We designate the complex of Prp38, Snu23, and Spp381 as the B Complex Protein (BCP) subcomplex. Under splicing conditions, the BCP associates with pre-mRNA after tri-snRNP binding. BCP release predominantly occurs after U4 snRNP dissociation and after NineTeen Complex (NTC) association. Under low concentrations of ATP, the BCP pre-associates with the tri-snRNP resulting in their simultaneous binding to pre-mRNA. Together, our results reveal that the BCP recruitment pathway to the spliceosome is conserved between S. cerevisiae and humans. Binding of the BCP to the tri-snRNP when ATP is limiting may result in formation of unproductive complexes that could be used to regulate splicing.

Comparative Colocalization Single-Molecule Spectroscopy (CoSMoS) with Multiple RNA Species

Colocalization single-molecule spectroscopy (CoSMoS) allows studying RNA-protein complexes in the full complexity of their cellular environment at single-molecule resolution. Conventionally, the interaction between a single RNA species and multiple proteins is monitored in real time. However, comparing interactions of the same proteins with different RNA species in the same cell extract promises unique insights into RNA biology. Here, we describe an approach to monitor multiple RNA species simultaneously to enable direct comparison. This approach represents a technological development to avoid conventional inter-experiment comparisons.

Preparation of SNAPf-Beads for Colocalization Single-Molecule Spectroscopy (CoSMoS) of RNA-Protein Complexes

The SNAP_f-tag is a chemical tag that allows rapid and highly specific covalent labeling of proteins even in the full complexity of the cellular environment. The SNAP_f-tag has been instrumental to study native RNA-protein complexes at single-molecule resolution in their cellular environment as efficient labeling of the RNAs and proteins of interest is essential for this colocalization single-molecule spectroscopy (CoSMoS) technique. However, removal of excessive benzylguanine dye after the labeling reaction has remained challenging. Here, we describe a strategy to remove excessive benzylguanine dye using SNAP_f-tag coated beads as sponges.

Analysis of spliceosome dynamics by maximum likelihood fitting of dwell time distributions

Colocalization single-molecule methods can provide a wealth of information concerning the ordering and dynamics of biomolecule assembly. These have been used extensively to study the pathways of spliceosome assembly in vitro. Key to these experiments is the measurement of binding times-either the dwell times of a multi-molecular interaction or times in between binding events. By analyzing hundreds of these times, many new insights into the kinetic pathways governing spliceosome assembly have been obtained. Collections of binding times are often plotted as histograms and can be fit to kinetic models using a variety of methods. Here, we describe the use of maximum likelihood methods to fit dwell time distributions without binning. In addition, we discuss several aspects of analyzing these distributions with histograms and pitfalls that can be encountered if improperly binned histograms are used. We have automated several aspects of maximum likelihood fitting of dwell time distributions in the AGATHA software package.

Single-Molecule Analysis of Pre-mRNA Splicing with Colocalization Single-Molecule Spectroscopy (CoSMoS)

Recent development of single-molecule techniques to study pre-mRNA splicing has provided insights into the dynamic nature of the spliceosome. Colocalization single-molecule spectroscopy (CoSMoS) allows following spliceosome assembly in real time at single-molecule resolution in the full complexity of cellular extracts. A detailed protocol of CoSMoS has been published previously (Anderson and Hoskins, Methods Mol Biol 1126:217-241, 2014). Here, we provide an update on the technical advances since the first CoSMoS studies including slide surface treatment, data processing, and representation. We describe various labeling strategies to generate RNA reporters with multiple dyes (or other moieties) at specific locations.

Fluorescent Labeling of Proteins in Whole Cell Extracts for Single-Molecule Imaging

Cellular machines such as the spliceosome and ribosome can be composed of dozens of individual proteins and nucleic acids. Given this complexity, it is not surprising that many cellular activities have not yet been biochemically reconstituted. Such processes are often studied in vitro in whole cell or fractionated lysates. This presents a challenge for obtaining detailed biochemical information when the components being investigated may be only a minor component of the extract and unrelated processes may interfere with the assay. Single-molecule fluorescence microscopy methods allow particular biomolecules to be analyzed even in the complex milieu of a cell extract. This is due to the use of bright fluorophores that emit light at wavelengths at which few cellular components fluoresce, and the development of chemical biology tools for attaching these fluorophores to specific cellular proteins. Here, we describe a protocol for fluorescent labeling of endogenous, SNAP-tagged yeast proteins in whole cell extract. This method allows biochemical reactions to be followed in cell lysates in real time using colocalization single-molecule fluorescence microscopy. Labeled complexes can also be isolated from extract and characterized by SNAP tag single-molecule pull-down (SNAP-SiMPull). These approaches have proven useful for studying complex biological machines such as the spliceosome that cannot yet be reconstituted from purified components.

Lights, camera, action! Capturing the spliceosome and pre-mRNA splicing with single-molecule fluorescence microscopy

The process of removing intronic sequences from a precursor to messenger RNA (pre-mRNA) to yield a mature mRNA transcript via splicing is an integral step in eukaryotic gene expression. Splicing is carried out by a cellular nanomachine called the spliceosome that is composed of RNA components and dozens of proteins. Despite decades of study, many fundamentals of spliceosome function have remained elusive. Recent developments in single-molecule fluorescence microscopy have afforded new tools to better probe the spliceosome and the complex, dynamic process of splicing by direct observation of single molecules. These cutting-edge technologies enable investigators to monitor the dynamics of specific splicing components, whole spliceosomes, and even cotranscriptional splicing within living cells. WIREs RNA 2016, 7:683-701. doi: 10.1002/wrna.1358 For further resources related to this article, please visit the WIREs website.

Single molecule analysis reveals reversible and irreversible steps during spliceosome activation

The spliceosome is a complex machine composed of small nuclear ribonucleoproteins (snRNPs) and accessory proteins that excises introns from pre-mRNAs. After assembly the spliceosome is activated for catalysis by rearrangement of subunits to form an active site. How this rearrangement is coordinated is not well-understood. During activation, U4 must be released to allow U6 conformational change, while Prp19 complex (NTC) recruitment is essential for stabilizing the active site. We used multi-wavelength colocalization single molecule spectroscopy to directly observe the key events in Saccharomyces cerevisiae spliceosome activation. Following binding of the U4/U6.U5 tri-snRNP, the spliceosome either reverses assembly by discarding tri-snRNP or proceeds to activation by irreversible U4 loss. The major pathway for NTC recruitment occurs after U4 release. ATP stimulates both the competing U4 release and tri-snRNP discard processes. The data reveal the activation mechanism and show that overall splicing efficiency may be maintained through repeated rounds of disassembly and tri-snRNP reassociation.

DOI:http://dx.doi.org/10.7554/eLife.14166.001

The genes in an organism’s DNA may be expressed to form a protein via an intermediate molecule called RNA. In many organisms including humans, gene expression often begins by making a precursor molecule called a pre-mRNA. The pre-mRNA contains regions called exons that code for the protein product and regions called introns that do not. A machine in the cell called the spliceosome has the job of removing the introns in the pre-mRNA and stitching the exons together by a process known as splicing.

The spliceosome is made up of dozens of components that assemble on the pre-mRNAs. Before a newly assembled spliceosome can carry out splicing, it must be activated. The activation process involves several steps that are powered by the cell's universal power source (a molecule called ATP), including the release of many components from the spliceosome. Many of the details of the activation process are unclear.

Spliceosomes in the yeast species Saccharomyces cerevisiae are similar to spliceosomes from humans, and so are often studied experimentally. Hoskins et al. have now used a technique called colocalization single molecule fluorescence spectroscopy to follow, in real time, a single yeast spliceosome molecule as it activates. This technique uses a specialized microscope and a number of colored lasers to detect different spliceosome proteins at the same time. Hoskins et al. found that one of the steps during activation is irreversible – once that step occurs, the spliceosome must either perform the next activation steps or start the processes of assembly and activation over again.

Hoskins et al. also discovered that ATP causes some spliceosomes to be discarded during activation and not used for splicing. This indicates that before spliceosomes are allowed to activate, they may undergo 'quality control', which may be important for making sure that gene expression occurs efficiently and correctly. Future studies will investigate how this quality control process works in further detail.

DOI:http://dx.doi.org/10.7554/eLife.14166.002

Design and construction of a multiwavelength, micromirror total internal reflectance fluorescence microscope

Colocalization single-molecule spectroscopy (CoSMoS) has proven to be a useful method for studying the composition, kinetics and mechanisms of complex cellular machines. Key to the technique is the ability to simultaneously monitor multiple proteins and/or nucleic acids as they interact with one another. Here we describe a protocol for constructing a CoSMoS micromirror total internal reflection fluorescence microscope (mmTIRFM). Design and construction of a scientific microscope often requires a number of custom components and a substantial time commitment. In our protocol, we have streamlined this process by implementation of a commercially available microscopy platform designed to accommodate the optical components necessary for an mmTIRFM. The mmTIRF system eliminates the need for machining custom parts by the end user and facilitates optical alignment. Depending on the experience level of the microscope builder, these time savings and the following protocol can enable mmTIRF construction to be completed within 2 months.