The Future of Footwear Friction

Biomechanical modeling of footwear-fluid-floor interaction during slips

Slips and falls are among the major concerns for public safety. Slipping risks can be reduced by ensuring adequate traction at the shoe-floor interface. The outsole design of footwear is a critical factor to maintain sufficient shoe-floor traction in the presence of slippery contaminants such as water or oil. While the role of floorings and contaminants on footwear traction has been studied widely, limited works have investigated the role of footwear outsole geometry and tread patterns on shoe-floor traction. In this work, eight footwear outsole designs and their traction performance were tested on a common flooring with water contamination, through the development of a novel fluid-structure interaction based computational framework. Induced fluid pressure, mass flow rates, and contact areas were quantified across the outsole patterns, and their effect on footwear friction was investigated. The study results were validated using mechanical slip testing experiments. The results indicated that the outsoles which had horizontal treads or untreaded heel regions can lead to drastic reduction of footwear friction. Also, contact area alone was quantified to be a poor choice in estimating the traction performance of footwear on water contaminated floorings. Such novel study results have not been reported to date, and are anticipated to provide important guidelines to footwear manufacturers to evaluate and optimize footwear tread parameters which would help in reducing the risk of slips.

Footwear outsole temperature may be more related to plantar pressure during a prolonged run than foot temperature

Objective. The temperature of the sole of the foot has been suggested as an alternative to the measurement of plantar pressure during running despite the scarce evidence about their relationship. The temperature of the footwear outsole could also be representative of plantar pressure distribution due to its less multifactorial dependence. The aim of the study was to determine if plantar pressure during a prolonged run could be related to plantar temperature, either of the sole of the foot or the footwear outsole.Approach. Thirty recreational runners (15 males and 15 females) performed a 30 min running test on a treadmill. Thermographic images of the sole of the foot and the footwear outsole were taken before and immediately after the test, and dynamic plantar pressure was measured at the end of the test. Pearson correlations and stepwise multiple linear regressions were performed.Main results.Plantar pressure percentage was related to a moderate correlation with plantar temperature percentage in forefoot and rearfoot (P < 0.05), showing a greater relationship with the footwear outsole than with the sole of the foot (r = 0.52-0.73 versusr = 0.40-0.61, respectively). Moreover, moderate correlations were also observed between footwear outsole and sole of the foot temperature variables, especially in rearfoot.Significance. Footwear outsole temperature may be better related to plantar pressure distribution than sole of the foot temperature, in the forefoot and rearfoot. The midfoot is the most sensitive and variable region to analyze, as it does not seem to have any relationship with plantar pressure.