Liquid Metals for Soft and Stretchable Electronics

Thermal-Sinterable EGaIn Nanoparticle Inks for Highly Deformable Bioelectrode Arrays

Liquid metal (especially eutectic gallium indium, EGaIn) nanoparticle inks overcome the poor wettability of high surface tension EGaIn to elastomer substrates and show great potential in soft electronics. Normally, a sintering strategy is required to break the oxide shells of the EGaIn nanoparticles (EGaIn NPs) to achieve conductive paths. Herein, for the first time, thermal-sinterable EGaIn NP inks are prepared by introducing thermal expansion microspheres (TEMs) into EGaIn NP solution. Through the mechanical pressure induced by the expansion of the heated TEMs, the printed EGaIn NPs can be sintered into electrically conductive paths to achieve highly stretchable bioelectrode arrays, which exhibit giant electromechanical performance (up to 680% strain), good cyclic stability (over 2 × 10⁴  cycles), and stable conductivity after high-speed rotation (6000 rpm). Simultaneously, the recording sites are hermetically sealed by ionic elastomer layers, ensuring the complete leakage-free property of EGaIn and reducing the electrochemical impedance of the electrodes (891.16 Ω at 1 kHz). The bioelectrode is successfully applied to monitor dynamic electromyographic signals. The sintering strategy overcomes the disadvantages of the traditional sintering strategies, such as leakage of EGaIn, reformation of large EGaIn droplets, and low throughput, which promotes the application of EGaIn in soft electronics.

Ultra-Deformable and Tissue-Adhesive Liquid Metal Antennas with High Wireless Powering Efficiency

Flexible and stretchable antennas are important for wireless communication using wearable and implantable devices to address mechanical mismatch at the tissue-device interface. Emerging technologies of liquid-metal-based stretchable electronics are promising approaches to improve the flexibility and stretchability of conventional metal-based antennas. However, existing methods to encapsulate liquid metals require monolithically thick (at least 100 µm) substrates, and the resulting devices are limited in deformability and tissue-adhesiveness. To overcome this limitation, fabrication of microchannels by direct ink writing on a 7 µm-thick elastomeric substrate is demonstrated, to obtain liquid metal microfluidic antennas with unprecedented deformability. The fabricated wireless light-emitting device is powered by a standard near-field-communication system (13.56 MHz, 1 W) and retained a consistent operation under deformations including stretching (>200% uniaxial strain), twisting (180° twist), and bending (3.0 mm radius of curvature) while maintaining a high quality factor (q > 20). Suture-free conformal adhesion of the polydopamine-coated device to ex vivo animal tissues under mechanical deformations is also demonstrated. This technology offers a new capability for the design and fabrication of wireless biomedical devices requiring conformable tissue-device integration toward minimally invasive, imperceptible medical treatments.

Harnessing the Rheological Properties of Liquid Metals To Shape Soft Electronic Conductors for Wearable Applications

Emerging applications of the Internet of Things in healthcare, wellness, and gaming require continuous monitoring of the body and its environment, fueling the need for wearable devices able to maintain intimate, reliable, and unobtrusive contact with the human body. This translates in the necessity to develop soft and deformable electronics that match the body's mechanics and dynamics. In recent years, various strategies have been proposed to form stretchable circuits and more specifically elastic electrical conductors embedded in elastomeric substrate using either geometrical structuring of solid conductors or intrinsically stretchable materials. Gallium (Ga)-based liquid metals (LMs) are an emerging class of materials offering a particularly interesting set of properties for the design of intrinsically deformable conductors. They concomitantly offer the high electrical conductivity of metals with the ability of liquids to flow and reconfigure. The specific chemical and physical properties of Ga-based LMs differ fundamentally from those of solid conductors and need to be considered to successfully process and implement them into stretchable electronic devices. In this Account, we report on how the key physical and chemical properties of Ga-based LMs can be leveraged to enable repeatable manufacturing and precise patterning of stretchable LM conductors. A comprehensive understanding of the interplay between the LM, its receiving substrate chemistry and topography, and the environmental conditions is necessary to meet the reproducibility and reliability standards for large scale deployment in next-generation wearable systems. In oxidative environments, a solid oxide skin forms at the surface of the LM and provides enough stiffness to counterbalance surface tension, and prevent the LM from beading up to a spherical shape. We review techniques that advantageously harness the oxide skin to form metastable structures such as spraying, 3D printing, or channel injection. Next, we explore how controlling the environmental condition prevents the formation or removes the oxide skin, thereby allowing for selective wetting of Ga lyophilic surfaces. Representative examples include selective plating and physical vapor deposition. The wettability of LMs can be further tuned by engineering the surface chemistry and topology of the receiving substrate to form superlyophobic or superlyophilic surfaces. In particular, our group developed Ga-superlyophilic substrates by engineering the surface of silicone rubber with microstructures and a gold coating layer. Thermal evaporation of Ga on such engineered substrates allows for the formation of smooth LM films with micrometric thickness control and design freedom. The versatility of the available deposition techniques facilitates the implementation of LM conductors in a wide variety of wearable devices. We review various epidermal electronic systems using LM conductors as interconnects to carry power and information, transducers and sensors, antennas, and complex hybrid (soft-rigid) electronic circuits. In addition, we highlight the limitations and challenges inherent to the use of Ga LM conductors that include electromigration, corrosion, solidification, and biocompatibility.