Biomechanical Properties and Mechanobiology of Cardiac ECM

Relationship between cardiac mechanical properties and cardiac magnetic resonance imaging at rest in childhood acute lymphoblastic leukemia survivors

The characterization of cardiac mechanical properties may contribute to better understanding of doxorubicin-induced cardiotoxicity. Our study aims to investigate the relationship between cardiac mechanical properties, T1 and T2 relaxation times and partition coefficient. Fifty childhood acute lymphoblastic leukemia survivors underwent a cardiac magnetic resonance (CMR) at rest on a 3T MRI system and included a standard ECG-gated 3(3)3(3)5 MOLLI sequence for T1 mapping and an ECG-gated T2-prepared TrueFISP sequence for T2 mapping. Partition coefficient, ejection fraction, end-diastolic volume (EDV) and end-systolic volume (ESV) were calculated. CircAdapt model was used to study cardiac mechanical performance (left ventricle stiffness (LVS), contractility (LVC) and pressure (Pmin and Pmax), cardiac work efficiency (CWE) and ventricular arterial coupling). In the whole cohort, our results showed that LVC (R2 = 69.2%, r = 0.83), Pmin (R2 = 62.9%, r = 0.79) and Pmax can be predicted by significant CMR parameters, while T1 (R2 = 23.2%, r = 0.48) and partition coefficient (R2 = 13.8%, r = 0.37) can be predicted by significant cardiac mechanical properties. In SR group LVS (R2 = 94.8%, r = 0.97), LVC (R2 = 93.7%, r = 0.96) and Pmin (R2 = 90.6%, r = 0.95) can be predicted by significant cardiac mechanical properties, while in HR + DEX group CWE (R2 = 49.8%, r = 0.70) can be predicted by significant cardiac mechanical properties. Partition coefficient (R2 = 72.6%, r = 0.85) can be predicted by significant CMR parameters in SR group. Early characterization of cardiac mechanical properties from CMR parameters has the potential to early detect doxorubicin-induced cardiotoxicity.

Alterations of biaxial viscoelastic properties of the right ventricle in pulmonary hypertension development in rest and acute stress conditions

Introduction: The right ventricle (RV) mechanical property is an important determinant of its function. However, compared to its elasticity, RV viscoelasticity is much less studied, and it remains unclear how pulmonary hypertension (PH) alters RV viscoelasticity. Our goal was to characterize the changes in RV free wall (RVFW) anisotropic viscoelastic properties with PH development and at varied heart rates. Methods: PH was induced in rats by monocrotaline treatment, and the RV function was quantified by echocardiography. After euthanasia, equibiaxial stress relaxation tests were performed on RVFWs from healthy and PH rats at various strain-rates and strain levels, which recapitulate physiological deformations at varied heart rates (at rest and under acute stress) and diastole phases (at early and late filling), respectively. Results and Discussion: We observed that PH increased RVFW viscoelasticity in both longitudinal (outflow tract) and circumferential directions. The tissue anisotropy was pronounced for the diseased RVs, not healthy RVs. We also examined the relative change of viscosity to elasticity by the damping capacity (ratio of dissipated energy to total energy), and we found that PH decreased RVFW damping capacity in both directions. The RV viscoelasticity was also differently altered from resting to acute stress conditions between the groups-the damping capacity was decreased only in the circumferential direction for healthy RVs, but it was reduced in both directions for diseased RVs. Lastly, we found some correlations between the damping capacity and RV function indices and there was no correlation between elasticity or viscosity and RV function. Thus, the RV damping capacity may be a better indicator of RV function than elasticity or viscosity alone. These novel findings on RV dynamic mechanical properties offer deeper insights into the role of RV biomechanics in the adaptation of RV to chronic pressure overload and acute stress.

Application of Nanomaterials in Stem Cell-Based Therapeutics for Cardiac Repair and Regeneration

Cardiovascular disease is a leading cause of disability and death worldwide. Although the survival rate of patients with heart diseases can be improved with contemporary pharmacological treatments and surgical procedures, none of these therapies provide a significant improvement in cardiac repair and regeneration. Stem cell-based therapies are a promising approach for functional recovery of damaged myocardium. However, the available stem cells are difficult to differentiate into cardiomyocytes, which result in the extremely low transplantation efficiency. Nanomaterials are widely used to regulate the myocardial differentiation of stem cells, and play a very important role in cardiac tissue engineering. This study discusses the current status and limitations of stem cells and cell-derived exosomes/micro RNAs based cardiac therapy, describes the cardiac repair mechanism of nanomaterials, summarizes the recent advances in nanomaterials used in cardiac repair and regeneration, and evaluates the advantages and disadvantages of the relevant nanomaterials. Besides discussing the potential clinical applications of nanomaterials in cardiac therapy, the perspectives and challenges of nanomaterials used in stem cell-based cardiac repair and regeneration are also considered. Finally, new research directions in this field are proposed, and future research trends are highlighted.

Lycopene regulates the mitochondrial unfolded protein response to prevent DEHP-induced cardiac mitochondrial damage in mice

Lycopene (LYC), as a kind of carotene, has antioxidant effects. Di(2-ethylhexyl) phthalate (DEHP) was used to improve the flexibility of plastics. However, the potential role of LYC in DEHP induced cardiac injury in mice remains unclear. Therefore, the aim of this study was to investigate the role and mechanism of LYC in DEHP induced cardiac injury. Male ICR mice were treated with DEHP (500 or 1000 mg per kg BW per day) and/or LYC (5 mg per kg BW per day) for 28 days. The results of histopathology and ultrastructure showed that LYC relieved the decrease of mitochondrial volume density and myocardial fibre disorder induced by DEHP. Subsequently, LYC attenuated DEHP-induced mitochondrial damage, mitochondrial unfolded protein response (UPR^mt) activation, nuclear factor erythroid 2-related factor 2 (Nrf2) mediated oxidative stress and heat shock response (HSR) activation induced by DEHP. LYC regulates UPR^mt to prevent DEHP-induced cardiac mitochondrial damage. Thus, this study provided new evidence of UPR^mt as a target for LYC treatment preventing DEHP-induced cardiac disease.

Passive myocardial mechanical properties: meaning, measurement, models

Passive mechanical tissue properties are major determinants of myocardial contraction and relaxation and, thus, shape cardiac function. Tightly regulated, dynamically adapting throughout life, and affecting a host of cellular functions, passive tissue mechanics also contribute to cardiac dysfunction. Development of treatments and early identification of diseases requires better spatio-temporal characterisation of tissue mechanical properties and their underlying mechanisms. With this understanding, key regulators may be identified, providing pathways with potential to control and limit pathological development. Methodologies and models used to assess and mimic tissue mechanical properties are diverse, and available data are in part mutually contradictory. In this review, we define important concepts useful for characterising passive mechanical tissue properties, and compare a variety of in vitro and in vivo techniques that allow one to assess tissue mechanics. We give definitions of key terms, and summarise insight into determinants of myocardial stiffness in situ. We then provide an overview of common experimental models utilised to assess the role of environmental stiffness and composition, and its effects on cardiac cell and tissue function. Finally, promising future directions are outlined.

Role of PI3K/Akt signaling pathway in cardiac fibrosis

Heart failure (HF) is considered as a severe health problem worldwide, while cardiac fibrosis is one of the main driving factors for the progress of HF. Cardiac fibrosis was characterized by changes in cardiomyocytes, cardiac fibroblasts, ratio of collagen (COL) I/III, and the excessive production and deposition of extracellular matrix (ECM), thus forming a scar tissue, which leads to pathological process of cardiac structural changes and systolic as well as diastolic dysfunction. Cardiac fibrosis is a common pathological change of many advanced cardiovascular diseases including ischemic heart disease, hypertension, and HF. Accumulated studies have proven that phosphoinositol-3 kinase (PI3K)/Akt signaling pathway is involved in regulating the occurrence, progression and pathological formation of cardiac fibrosis via regulating cell survival, apoptosis, growth, cardiac contractility and even the transcription of related genes through a series of molecules including mammalian target of rapamycin (mTOR), glycogen synthase kinase 3 (GSK-3), forkhead box proteins O1/3 (FoxO1/3), and nitric oxide synthase (NOS). Thus, the review focuses on the role of PI3K/Akt signaling pathway in the cardiac fibrosis. The information reviewed here should be significant in understanding the role of PI3K/Akt in cardiac fibrosis and contribute to the design of further studies related to PI3K/Akt and the cardiac fibrotic response, as well as sought to shed light on a potential treatment for cardiac fibrosis.

Cells, Materials, and Fabrication Processes for Cardiac Tissue Engineering

Cardiovascular disease is the number one killer worldwide, with myocardial infarction (MI) responsible for approximately 1 in 6 deaths. The lack of endogenous regenerative capacity, added to the deleterious remodelling programme set into motion by myocardial necrosis, turns MI into a progressively debilitating disease, which current pharmacological therapy cannot halt. The advent of Regenerative Therapies over 2 decades ago kick-started a whole new scientific field whose aim was to prevent or even reverse the pathological processes of MI. As a highly dynamic organ, the heart displays a tight association between 3D structure and function, with the non-cellular components, mainly the cardiac extracellular matrix (ECM), playing both fundamental active and passive roles. Tissue engineering aims to reproduce this tissue architecture and function in order to fabricate replicas able to mimic or even substitute damaged organs. Recent advances in cell reprogramming and refinement of methods for additive manufacturing have played a critical role in the development of clinically relevant engineered cardiovascular tissues. This review focuses on the generation of human cardiac tissues for therapy, paying special attention to human pluripotent stem cells and their derivatives. We provide a perspective on progress in regenerative medicine from the early stages of cell therapy to the present day, as well as an overview of cellular processes, materials and fabrication strategies currently under investigation. Finally, we summarise current clinical applications and reflect on the most urgent needs and gaps to be filled for efficient translation to the clinical arena.

Establishment of adult right ventricle failure in ovine using a graded, animal-specific pulmonary artery constriction model

BACKGROUND

Right ventricle failure (RVF) is associated with serious cardiac and pulmonary diseases that contribute significantly to the morbidity and mortality of patients. Currently, the mechanisms of RVF are not fully understood and it is partly due to the lack of large animal models in adult RVF. In this study, we aim to establish a model of RVF in adult ovine and examine the structure and function relations in the RV.

METHODS

RV pressure overload was induced in adult male sheep by revised pulmonary artery constriction (PAC). Briefly, an adjustable hydraulic occluder was placed around the main pulmonary artery trunk. Then, repeated saline injection was performed at weeks 0, 1, and 4, where the amount of saline was determined in an animal-specific manner. Healthy, age-matched male sheep were used as additional controls. Echocardiography was performed bi-weekly and on week 11 post-PAC, hemodynamic and biological measurements were obtained.

RESULTS

This PAC methodology resulted in a marked increase in RV systolic pressure and decreases in stroke volume and tricuspid annular plane systolic excursion, indicating signs of RVF. Significant increases in RV chamber size, wall thickness, and Fulton's index were observed. Cardiomyocyte hypertrophy and collagen accumulation (particularly type III collagen) were evident, and these structural changes were correlated with RV dysfunction.

CONCLUSION

In summary, the animal-specific, repeated PAC provided a robust approach to induce adult RVF, and this ovine model will offer a useful tool to study the progression and treatment of adult RVF that is translatable to human diseases.

Current Understanding of the Biomechanics of Ventricular Tissues in Heart Failure

Heart failure is the leading cause of death worldwide, and the most common cause of heart failure is ventricular dysfunction. It is well known that the ventricles are anisotropic and viscoelastic tissues and their mechanical properties change in diseased states. The tissue mechanical behavior is an important determinant of the function of ventricles. The aim of this paper is to review the current understanding of the biomechanics of ventricular tissues as well as the clinical significance. We present the common methods of the mechanical measurement of ventricles, the known ventricular mechanical properties including the viscoelasticity of the tissue, the existing computational models, and the clinical relevance of the ventricular mechanical properties. Lastly, we suggest some future research directions to elucidate the roles of the ventricular biomechanics in the ventricular dysfunction to inspire new therapies for heart failure patients.