Mechanical Strain Using 2D and 3D Bioreactors Induces Osteogenesis: Implications for Bone Tissue Engineering. Adv Biochem Eng Biotechnol. 2009;112:95-123. [PMID: 19290499 DOI: 10.1007/978-3-540-69357-4_5]

Design, Fabrication and Characterization of Biodegradable Composites Containing Closo-Borates as Potential Materials for Boron Neutron Capture Therapy

Boron neutron capture therapy (BNCT) has been recognized as a very promising approach for cancer treatment. In the case of osteosarcoma, boron-containing scaffolds can be a powerful tool to combine boron delivery to the tumor cells and the repair of postoperative bone defects. Here we describe the fabrication and characterization of novel biodegradable polymer composites as films and 3D-printed matrices based on aliphatic polyesters containing closo-borates (CB) for BNCT. Different approaches to the fabrication of composites have been applied, and the mechanical properties of these composites, kinetics of their degradation, and the release of closo-borate have been studied. The most complex scaffold was a 3D-printed poly(ε-caprolactone) matrix filled with CB-containing alginate/gelatin hydrogel to enhance biocompatibility. The results obtained allowed us to confirm the high potential of the developed composite materials for application in BNCT and bone tissue regeneration.

A Multidisciplinary Journey towards Bone Tissue Engineering

Millions of patients suffer yearly from bone fractures and disorders such as osteoporosis or cancer, which constitute the most common causes of severe long-term pain and physical disabilities. The intrinsic capacity of bone to repair the damaged bone allows normal healing of most small bone injuries. However, larger bone defects or more complex diseases require additional stimulation to fully heal. In this context, the traditional routes to address bone disorders present several associated drawbacks concerning their efficacy and cost-effectiveness. Thus, alternative therapies become necessary to overcome these limitations. In recent decades, bone tissue engineering has emerged as a promising interdisciplinary strategy to mimic environments specifically designed to facilitate bone tissue regeneration. Approaches developed to date aim at three essential factors: osteoconductive scaffolds, osteoinduction through growth factors, and cells with osteogenic capability. This review addresses the biological basis of bone and its remodeling process, providing an overview of the bone tissue engineering strategies developed to date and describing the mechanisms that underlie cell-biomaterial interactions.

Digital Twins for Tissue Culture Techniques—Concepts, Expectations, and State of the Art

Techniques to provide in vitro tissue culture have undergone significant changes during the last decades, and current applications involve interactions of cells and organoids, three-dimensional cell co-cultures, and organ/body-on-chip tools. Efficient computer-aided and mathematical model-based methods are required for efficient and knowledge-driven characterization, optimization, and routine manufacturing of tissue culture systems. As an alternative to purely experimental-driven research, the usage of comprehensive mathematical models as a virtual in silico representation of the tissue culture, namely a digital twin, can be advantageous. Digital twins include the mechanistic of the biological system in the form of diverse mathematical models, which describe the interaction between tissue culture techniques and cell growth, metabolism, and the quality of the tissue. In this review, current concepts, expectations, and the state of the art of digital twins for tissue culture concepts will be highlighted. In general, DT’s can be applied along the full process chain and along the product life cycle. Due to the complexity, the focus of this review will be especially on the design, characterization, and operation of the tissue culture techniques.

Direct comparison of 3D and 2D cultivation reveals higher osteogenic capacity of elderly osteoblasts in 3D

Background

The aim of this study was the investigation of the osteogenic potential of human osteoblasts of advanced donor age in 2D and 3D culture.

Methods

Osteoblasts were induced to osteogenic differentiation and cultivated, using the same polystyrene material in 2D and 3D culture for 2 weeks. Samples were taken to evaluate alkaline phosphatase (ALP) activity, mineralization and gene expression.

Results

Osteoprotegerin (OPG) levels were significantly increased (8.2-fold) on day 7 in 3D compared to day 0 (p < 0.0001) and 11.6-fold higher in 3D than in 2D (p < 0.0001). Both culture systems showed reduced osteocalcin (OC) levels (2D 85% and 3D 50% of basic value). Collagen type 1 (Col1) expression was elevated in 3D on day 7 (1.4-fold; p = 0.009). Osteopontin (OP) expression showed 6.5-fold higher levels on day 7 (p = 0.002) in 3D than in 2D. Mineralization was significantly higher in 3D on day 14 (p = 0.0002).

Conclusion

Advanced donor age human primary osteoblasts reveal significantly higher gene expression levels of OPG, Col1 and OP in 3D than in monolayer. Therefore, it seems that a relatively high potential of bone formation in a natural 3D arrangement is presumably still present in osteoblasts of elderly people.

Trial registration

5217/11 on the 22nd of Dec. 2011.

Gelatin-Methacryloyl (GelMA) Formulated with Human Platelet Lysate Supports Mesenchymal Stem Cell Proliferation and Differentiation and Enhances the Hydrogel's Mechanical Properties

Three-dimensional (3D) cell culture is a major focus of current research, since cultivation under physiological conditions provides more reliable information about in vivo cell behavior. 3D cell cultures are used in basic research to better understand intercellular and cell-matrix interactions. However, 3D cell culture plays an increasingly important role in the in vitro testing of bioactive substances and tissue engineering. Gelatin-methacryloyl (GelMA) hydrogels of different degrees of functionalization (DoFs) are a versatile tool for 3D cell culture and related applications such as bioprinting. Human platelet lysate (hPL) has already demonstrated positive effects on 2D cell cultures of different cell types and has proven a valuable alternative to fetal calf serum (FCS). Traditionally, all hydrogels are formulated using buffers. In this study, we supplemented GelMA hydrogels of different DoF with hPL during adipose tissue-derived mesenchymal stem cell (AD-MSCs) encapsulation. We studied the effect of hPL supplementation on the spreading, proliferation, and osteogenic differentiation of AD-MSCs. In addition, the influence of hPL on hydrogel properties was also investigated. We demonstrate that the addition of hPL enhanced AD-MSC spreading, proliferation, and osteogenic differentiation in a concentration-dependent manner. Moreover, the addition of hPL also increased GelMA viscosity and stiffness.

A computational simulation of cyclic stretch of an individual stem cell using a nonlinear model

Many experiments have shown that mechanical stimuli like cyclic strains might be helpful in stem cell differentiation. To maximize such differentiations efficiency, it is imperative to detect the cellular mechanical responses to these stimuli. The purpose of this research was to show that a newly presented hyper-viscoelastic model could correctly predict the level of stresses required to obtain a different response from a single mesenchymal stem cell cultured in a fibrin hydrogel block under a 10% cyclic strain at a frequency of 1 Hz, employing finite element method. One of the novelties of the research was the use of a model based on Simo's model. Another important feature of the research was the proposition of a multiscale model considering a layer of integrins. It was concluded that the forces exerted on the biological molecules had the maximum values of 24, 45, and 15 pN for the circumferential, radial, and shear forces, respectively. According to the results, the exerted forces within the cytoskeleton can lead to a different cellular response. These results might be a premise for interpreting events that lead to differentiation of stem cells into fibrochondrocytes. In addition, they can be beneficial in effective design of biological experiments as regards to this issue.

Enhanced Osteogenesis of ADSCs by the Synergistic Effect of Aligned Fibers Containing Collagen I

The topographical features and material composition of scaffolds have a powerful influence on cell behaviors such as proliferation and differentiation. Here, scaffolds consisting of aligned fibers with incorporated bioactive collagen I were tested for their ability to enhance osteogenesis in vitro. Rat adipose-derived mesenchymal stem cells (ADSCs) were seeded on the scaffolds and their morphology, proliferation, and osteogenic differentiation were examined. Aligned scaffolds with collagen I showed the best osteogenic properties. Also, adhesion-related genes showed the higher expression on aligned scaffolds with collagen I. Our findings indicate that fiber alignment combined with incorporation of collagen I increases the capacity of electrospun scaffolds to induce enhanced and directed osteogenesis. Such scaffolds may, therefore, have potential for improving guided oral bone regeneration.

Overcoming physical constraints in bone engineering: ‘the importance of being vascularized’

Bone plays several physiological functions and is the second most commonly transplanted tissue after blood. Since the treatment of large bone defects is still unsatisfactory, researchers have endeavoured to obtain scaffolds able to release growth and differentiation factors for mesenchymal stem cells, osteoblasts and endothelial cells in order to obtain faster mineralization and prompt a reliable vascularization. Nowadays, the application of osteoblastic cultures spans from cell physiology and pharmacology to cytocompatibility measurement and osteogenic potential evaluation of novel biomaterials. To overcome the simple traditional monocultures in vitro, co-cultures of osteogenic and vasculogenic precursors were introduced with very interesting results. Increasingly complex culture systems have been developed, where cells are seeded on proper scaffolds and stimulated so as to mimic the physiological conditions more accurately. These bioreactors aim at enabling bone regeneration by incorporating different cells types into bio-inspired materials within a surveilled habitat. This review is focused on the most recent developments in the organomimetic cultures of osteoblasts and vascular endothelial cells for bone tissue engineering.

Engineering stem cell niches in bioreactors

Stem cells, including embryonic stem cells, induced pluripotent stem cells, mesenchymal stem cells and amniotic fluid stem cells have the potential to be expanded and differentiated into various cell types in the body. Efficient differentiation of stem cells with the desired tissue-specific function is critical for stem cell-based cell therapy, tissue engineering, drug discovery and disease modeling. Bioreactors provide a great platform to regulate the stem cell microenvironment, known as "niches", to impact stem cell fate decision. The niche factors include the regulatory factors such as oxygen, extracellular matrix (synthetic and decellularized), paracrine/autocrine signaling and physical forces (i.e., mechanical force, electrical force and flow shear). The use of novel bioreactors with precise control and recapitulation of niche factors through modulating reactor operation parameters can enable efficient stem cell expansion and differentiation. Recently, the development of microfluidic devices and microbioreactors also provides powerful tools to manipulate the stem cell microenvironment by adjusting flow rate and cytokine gradients. In general, bioreactor engineering can be used to better modulate stem cell niches critical for stem cell expansion, differentiation and applications as novel cell-based biomedicines. This paper reviews important factors that can be more precisely controlled in bioreactors and their effects on stem cell engineering.

Adipose-Derived Stem Cells in Tissue Regeneration: A Review

In 2001, researchers at the University of California, Los Angeles, described the isolation of a new population of adult stem cells from liposuctioned adipose tissue. These stem cells, now known as adipose-derived stem cells or ADSCs, have gone on to become one of the most popular adult stem cells populations in the fields of stem cell research and regenerative medicine. As of today, thousands of research and clinical articles have been published using ASCs, describing their possible pluripotency in vitro, their uses in regenerative animal models, and their application to the clinic. This paper outlines the progress made in the ASC field since their initial description in 2001, describing their mesodermal, ectodermal, and endodermal potentials both in vitro and in vivo, their use in mediating inflammation and vascularization during tissue regeneration, and their potential for reprogramming into induced pluripotent cells.

Induction of osteogenic differentiation of adipose derived stem cells by microstructured nitinol actuator-mediated mechanical stress

The development of large tissue engineered bone remains a challenge in vitro, therefore the use of hybrid-implants might offer a bridge between tissue engineering and dense metal or ceramic implants. Especially the combination of the pseudoelastic implant material Nitinol (NiTi) with adipose derived stem cells (ASCs) opens new opportunities, as ASCs are able to differentiate osteogenically and therefore enhance osseointegration of implants. Due to limited knowledge about the effects of NiTi-structures manufactured by selective laser melting (SLM) on ASCs the study started with an evaluation of cytocompatibility followed by the investigation of the use of SLM-generated 3-dimensional NiTi-structures preseeded with ASCs as osteoimplant model. In this study we could demonstrate for the first time that osteogenic differentiation of ASCs can be induced by implant-mediated mechanical stimulation without support of osteogenic cell culture media. By use of an innovative implant design and synthesis via SLM-technique we achieved high rates of vital cells, proper osteogenic differentiation and mechanically loadable NiTi-scaffolds could be achieved.

Adipose-derived stem cells in functional bone tissue engineering: lessons from bone mechanobiology

This review aims to highlight the current and significant work in the use of adipose-derived stem cells (ASC) in functional bone tissue engineering framed through the bone mechanobiology perspective. Over a century of work on the principles of bone mechanosensitivity is now being applied to our understanding of bone development. We are just beginning to harness that potential using stem cells in bone tissue engineering. ASC are the primary focus of this review due to their abundance and relative ease of accessibility for autologous procedures. This article outlines the current knowledge base in bone mechanobiology to investigate how the knowledge from this area has been applied to the various stem cell-based approaches to engineering bone tissue constructs. Specific emphasis is placed on the use of human ASC for this application.

Simultaneous application of interstitial flow and cyclic mechanical strain to a three-dimensional cell-seeded hydrogel

The present study describes the design and validation of a simple apparatus to apply simultaneous mechanical and fluidic stress to three-dimensional (3D) cell-seeded collagen hydrogels. Constructs were formed in wells in a silicone substrate that could be stretched cyclically, and were also fitted with inlet ports to apply fluid flow. Acid etching was used to retain adhesion of the gels to the walls of the well, and an acellular layer of collagen hydrogel was used to distribute flow evenly. Finite element modeling showed that 5% uniaxial strain applied to the entire silicone substrate resulted in ∼6.5% strain in each of the gel constructs. Permeability testing and flow observation showed that acellular hydrogels were fourfold more permeable than cardiac fibroblast-seeded gels, and that the fluid distributed evenly in the acellular layer before entering the cell-seeded gel. Viability testing and imaging demonstrated that cells remained viable with expected fibroblast morphology for the 120 h duration of the experiments. These results demonstrate that this simple bioreactor can be used to study the effects of mechanical strain and interstitial flow in 3D protein hydrogels. Such 3D tissue models have utility in studying cell and tissue responses to their mechanical environment.