Electrostatic Force Microscopy and Kelvin Force Microscopy as a Probe of the Electrostatic and Electronic Properties of Carbon Nanotubes

Mapping and Quantifying Surface Charges on Clay Nanoparticles

Understanding the electrical properties of clay nanoparticles is very important since they play a crucial role in every aspect of oil sands processing, from bitumen extraction to sedimentation in mature fine tailings (MFT). Here, we report the direct mapping and quantification of surface charges on clay nanoparticles using Kelvin probe force microscopy (KPFM) and electrostatic force microscopy (EFM). The morphology of clean kaolinite clay nanoparticles shows a layered structure, while the corresponding surface potential map shows a layer-dependent charge distribution. More importantly, a surface charge density of 25 nC/cm(2) was estimated for clean kaolinite layers by using EFM measurements. On the other hand, the EFM measurements show that the clay particles obtained from the tailings demonstrate a reduced surface charge density of 7 nC/cm(2), which may be possibly attributed to the presence of various bituminous compounds residing on the clay surfaces.

Direct imaging of charge transport in progressively reduced graphene oxide using electrostatic force microscopy

Graphene oxide (GO) has emerged as a multifunctional material that can be synthesized in bulk quantities and can be solution processed to form large-area atomic layered photoactive, flexible thin films for optoelectronic devices. This is largely due to the potential ability to tune electrical and optical properties of GO using functional groups. For the successful application of GO, it is key to understand the evolution of its optoelectronic properties as the GO undergoes a phase transition from its insulating and optically active state to the electrically conducting state with progressive reduction. In this paper, we use a combination of electrostatic force microscopy (EFM) and optical spectroscopy to monitor the emergence of the optoelectronic properties of GO with progressive reduction. EFM measurements enable, for the first time, direct visualization of charge propagation along the conducting pathways that emerge on progressively reduced graphene oxide (rGO) and demonstrate that with the increasing degree of reduction, injected charges can rapidly migrate over a distance of several micrometers, irrespective of their polarities. Direct imaging reveals the presence of an insurmountable potential barrier between reduced GO (rGO) and GO, which plays the decisive role in the charge transport. We complement charge imaging with theoretical modeling using quantum chemistry calculations that further demonstrate that the role of barrier in regulating the charge transport. Furthermore, by correlating the EFM measurements with photoluminescence imaging and electrical conductivity studies, we identify a bifunctional state in GO, where the optical properties are preserved along with good electrical conductivity, providing design principles for the development of GO-based, low-cost, thin-film optoelectronic applications.

Seeing is believing: novel imaging techniques help clarify microbial nanowire structure and function

Novel imaging approaches have recently helped to clarify the properties of 'microbial nanowires'. Geobacter sulfurreducens pili are actual wires. They possess metallic-like conductivity, which can be attributed to overlapping pi-pi orbitals of key aromatic amino acids. Electrostatic force microscopy recently confirmed charge propagation along the pili, in a manner similar to carbon nanotubes. The pili are essential for long-range electron transport to insoluble electron acceptors and interspecies electron transfer. Previous claims that Shewanella oneidensis also produce conductive pili have recently been recanted, based on novel live-imaging studies. The putative pili are, in fact, long extensions of the cytochrome-rich outer membrane and periplasm that, when dried, collapse to form filaments with dimensions similar to pili. It has yet to be demonstrated whether the cytochrome-to-cytochrome electron hopping documented in the dried membrane extensions takes place in intact hydrated membrane extensions or whether the membrane extensions enhance electron transport to insoluble electron acceptors such as Fe(III) oxides or electrodes. These findings demonstrate that G. sulfurreducens conductive pili and the outer membrane extensions of S. oneidensis are fundamentally different in composition, mechanism of electron transport and physiological role. New methods for evaluating filament conductivity will facilitate screening the microbial world for nanowires and elucidating their function.

Determination of charge on asphaltene nanoaggregates in air using electrostatic force microscopy

In this paper, we provide measurement of charge of asphaltene nanoaggregates in air using electrostatic force microscopy. We obtain the average surface charge density of the nanoaggregates as 43.7 nC/cm(2). Among the different aspects of asphaltene, one of the least known is its charge and the effect of solvent and compositional variability (of asphaltene) in dictating this charge. For aqueous systems, asphaltene charge demonstrates a strong dependence on the pH and the salt concentration, indicating that a possible ionization of the surface groups leads to this charging. On the contrary, for asphaltene in nonpolar media (e.g., toluene and heptane), it is believed that asphaltene native charge is central in dictating this charging. This native charge is the solvent-independent charge or the asphaltene charge in air. Our measurements, therefore, provide the first direct quantification (i.e., a quantification of charge not from the measurement of the asphaltene mobilities, which in turn requires specification of the nonuniform asphaltene size distribution) of this asphaltene native charge by conducting the measurements in air. Similar measurements in a solvent may introduce a solvent-dependent value, thereby forbidding not only the exact quantification of this native charge but also the understanding of the specific role of the solvent. This measurement, therefore, will provide a useful starting point to quantify the mechanism of asphaltene charging in nonpolar solvents with important ramifications in deciphering the role of asphaltene in transport and handling of crude and heavy oils.

Dielectric screening in atomically thin boron nitride nanosheets

Two-dimensional (2D) hexagonal boron nitride (BN) nanosheets are excellent dielectric substrate for graphene, molybdenum disulfide, and many other 2D nanomaterial-based electronic and photonic devices. To optimize the performance of these 2D devices, it is essential to understand the dielectric screening properties of BN nanosheets as a function of the thickness. Here, electric force microscopy along with theoretical calculations based on both state-of-the-art first-principles calculations with van der Waals interactions under consideration, and nonlinear Thomas-Fermi theory models are used to investigate the dielectric screening in high-quality BN nanosheets of different thicknesses. It is found that atomically thin BN nanosheets are less effective in electric field screening, but the screening capability of BN shows a relatively weak dependence on the layer thickness.

Visualization of charge propagation along individual pili proteins using ambient electrostatic force microscopy

The nanoscale imaging of charge flow in proteins is crucial to understanding several life processes, including respiration, metabolism and photosynthesis. However, existing imaging methods are only effective under non-physiological conditions or are limited to photosynthetic proteins. Here, we show that electrostatic force microscopy can be used to directly visualize charge propagation along pili of Geobacter sulfurreducens with nanometre resolution and under ambient conditions. Charges injected at a single point into individual, untreated pili, which are still attached to cells, propagated over the entire filament. The mobile charge density in the pili, as well as the temperature and pH dependence of the charge density, were similar to those of carbon nanotubes and other organic conductors. These findings, coupled with a lack of charge propagation in mutated pili that were missing key aromatic amino acids, suggest that the pili of G. sulfurreducens function as molecular wires with transport via delocalized charges, rather than the hopping mechanism that is typical of biological electron transport.

Dynamic electrostatic force microscopy technique for the study of electrical properties with improved spatial resolution

The need to resolve the electrical properties of confined structures (CNTs, quantum dots, nanorods, etc) is becoming increasingly important in the field of electronic and optoelectronic devices. Here we propose an approach based on amplitude modulated electrostatic force microscopy to obtain measurements at small tip-sample distances, where highly nonlinear forces are present. We discuss how this improves the lateral resolution of the technique and allows probing of the electrical and surface properties. The complete force field at different tip biases is employed to derive the local work function difference. Then, by appropriately biasing the tip-sample system, short-range forces are reconstructed. The short-range component is then separated from the generic tip-sample force in order to recover the pure electrostatic contribution. This data can be employed to derive the tip-sample capacitance curve and the sample dielectric constant. After presenting a theoretical model that justifies the need for probing the electrical properties of the sample in the vicinity of the surface, the methodology is presented in detail and verified experimentally.

Sub-surface imaging of carbon nanotube-polymer composites using dynamic AFM methods

High-resolution sub-surface imaging of carbon nanotube (CNT) networks within polymer nanocomposites is demonstrated through electrical characterization techniques based on dynamic atomic force microscopy (AFM). We compare three techniques implemented in the single-pass configuration: DC-biased amplitude modulated AFM (AM-AFM), electrostatic force microscopy (EFM) and Kelvin probe force microscopy (KPFM) in terms of the physics of sub-surface image formation and experimental robustness. The methods were applied to study the dispersion of sub-surface networks of single-walled nanotubes (SWNTs) in a polyimide (PI) matrix. We conclude that among these methods, the KPFM channel, which measures the capacitance gradient (∂C/∂d) at the second harmonic of electrical excitation, is the best channel to obtain high-contrast images of the CNT network embedded in the polymer matrix, without the influence of surface conditions. Additionally, we propose an analysis of the ∂C/∂d images as a tool to characterize the dispersion and connectivity of the CNTs. Through the analysis we demonstrate that these AFM-based sub-surface methods probe sufficiently deep within the SWNT composites, to resolve clustered networks that likely play a role in conductivity percolation. This opens up the possibility of dynamic AFM-based characterization of sub-surface dispersion and connectivity in nanostructured composites, two critical parameters for nanocomposite applications in sensors and energy storage devices.