Photoinduced Generation of Hydroxyl Radical in Natural Waters

Cyanohydrin Equilibria Implicate Non-Aromatic Aldehydes in Photochemical Production of Oceanic Carbon Monoxide

Carbonyls have previously been dismissed as significant precursors for carbon monoxide (CO) photoproduction from natural chromophoric dissolved organic matter (CDOM). Here, we used hydrogen cyanide (HCN), which reacts with carbonyls to form photochemically inert cyanohydrins, as a probe to re-examine the role of carbonyls in CO photoproduction. Adding HCN to low-absorbance euphotic zone seawater decreased CO photoproduction. Modeling [HCN] (∼5 to 364 μM) vs the percent decrease in CO photoproduction (%CO↓) yielded carbonyl-cyanohydrin dissociation equilibrium constants, KD, and maximum %CO↓, %CO↓max values. Four Atlantic and Pacific seawater KDs (66.7 ± 19.6 μM) overlap aqueous aliphatic but not aromatic aldehyde KDs. Phenylacetaldehyde (PA) and other β,γ-unsaturated aldehydes are proposed as prototypical CO precursors. Direct photolysis of ∼10 nM PA can supply the measured daily production of HCN-sensitive CO at an open-ocean site near Bermuda. HCN's %CO↓max was 31 ± 2.5% in North Atlantic seawater vs the 13 ± 2.5% inhibition of CO photoproduction by borohydride, a dilemma since only borohydride affects most ketones. Borohydride also decreased CDOM absorption much more than did HCN. This puzzle probably reflects differing steric and solvation requirements in HCN- and borohydride-CDOM reactions. This study demonstrates cyanophilic aldehydes to be a significant source of open-ocean CO and reveals new clues regarding CDOM photochemistry mechanisms.

Bioluminescence Sensing in 3D Spherical Microtissues for Multiple Bioactivity Analysis of Environmental Samples

The development of predictive in vitro sensing tools able to provide rapid information on the different bioactivities of a sample is of pivotal importance, not only to monitor environmental toxicants, but also to understand their mechanisms of action on diverse molecular pathways. This mechanistic understanding is highly important for the characterization of toxicological hazards, and for the risk assessment of chemicals and environmental samples such as surface waters and effluents. Prompted by this need, we developed and optimized a straightforward bioluminescent multiplexed assay which enables the measurement of four bioactivities, selected for their relevance from a toxicological perspective, in bioluminescent microtissues. The assay was developed to monitor inflammatory, antioxidant, and toxic activity, and the presence of heavy metals, and was successfully applied to the analysis of river water samples, showing potential applicability for environmental analyses. The assay, which does not require advanced equipment, can be easily implemented in general laboratories equipped with basic cell culture facilities and a luminometer.

Wireless UV-A LEDs-driven AOP in the treatment of agro-industrial wastewaters

A wireless UV-A LEDs lab-scale reactor powered by a resonant inductive coupling (RLC) system was built to maximize the UV photon absorption of agro-industrial wastewaters. The UV-A LEDs (λ = 365 nm) energy was supplied through a magnetic field generated inside of the photoreactor by induction coils placed on the external wall made of polyvinyl chloride. Immersing the light sources in the wastewater increases the photon transfer efficiency and the reaction rate. Maximum magnetic field and optical irradiance were obtained at 26.8 and 27.0 kHz, respectively. As proof-of-concept, elderberry wastewater (EW), olive washing wastewater (OWW) and white and red winery wastewaters (WWW and RWW) were treated combining the wireless UV-A LEDs with the Advanced Oxidation Process (AOP) - Fenton reagent. Fenton experiments were performed using [Fe²⁺] = 10 mg L^-1_, [H₂O₂] = 500 mg L^-1, pH = 3 and a reaction time of 4 h. With EW a DOC removal of 35% (k = 0.0696 h^-1) was achieved, whereas adding the wireless UV-A LEDs (f = 26.8 kHz) 53% was attained (k = 0.1722 h^-1). The Electric Energy per Order (E_EO) for the wireless UV-A LEDs consumption was calculated (E_{EO LEDs} = 48.7 kWh m^-3 order^-1) and for all the remain equipment (air pump, RC box and power amplifier), E_{EO total} = 495 kWh m^-3 order^-1. Experiments with OWW presented a DOC removal of 62% and a E_{EO LEDs} = 40.5 kWh m^-3 order^-1; RWW shown 40% of DOC removal and a E_{EO LEDs} = 68.4 kWh m^-3 order^-1, while with WWW 35% of DOC removal and a E_{EO LEDs} = 79.8 kWh m^-3 order^-1 were obtained. This work shows that wireless UV-A LEDs can be a promising alternative to conventional UV lamps and wired LEDs in the treatment of real wastewaters. However, optimization of the induction system is still needed, as well as the number and wavelength of the LEDs (e.g. UV-C LEDs) to reduce the overall treatment costs.