Head size determination and the morphogenesis of satellite phage P4

Acinetobacter baumannii satellite phage Aci01-2-Phanie depends on a helper myophage for its multiplication

We report the discovery of a satellite-helper phage system with a novel type of dependence on a tail donor. The Acinetobacter baumannii satellite podovirus Aci01-2-Phanie (short name Phanie) uses a phage phi29-like DNA replication and packaging mode. Its linear 11,885 bp dsDNA genome bears 171 bp inverted terminal repeats (ITR). Phanie is related to phage DU-PP-III from Pectobacterium and to members of the Astrithrvirus from Salmonella enterica. Together, they form a new clade of phages with 27% to 30% identity over the whole genome. Detailed 3D protein structure prediction and mass spectrometry analyses demonstrate that Phanie encodes its capsid structural genes and genes necessary to form a short tail. However, our study reveals that Phanie virions are non-infectious unless they associate with the contractile tail of an unrelated phage, Aci01-1, to produce chimeric myoviruses. Following the coinfection of Phanie with myovirus Aci01-1, hybrid viral particles composed of Phanie capsids and Aci01-1 contractile tails are assembled together with Phanie and Aci01-1 particles.IMPORTANCEThere are few reported cases of satellite-helper phage interactions but many more may be yet undiscovered. Here we describe a new mode of satellite phage dependence on a helper phage. Phanie, like phage phi29, replicates its linear dsDNA by a protein primed-mechanism and protects it inside podovirus-like particles. However, these particles are defective, requiring the acquisition of the tail from a myovirus helper for production of infectious virions. The formation of chimeras between a phi29-like podovirus and a helper contractile tail reveals an unexpected association between very different bacterial viruses.

Complete virion assembly with scaffolding proteins altered in the ability to perform a critical conformational switch

In the phiX174 procapsid, 240 external scaffolding proteins form a nonquasiequivalent lattice. To achieve this arrangement, the four structurally unique subunits must undergo position-dependent conformational switches. One switch is mediated by glycine residue 61, which allows a 30 degrees kink to form in alpha-helix 3 in two subunits, whereas the helix is straight in the other two subunits. No other amino acid should be able to produce a bend of this magnitude. Accordingly, all substitutions for G61 are nonviable but mutant proteins differ vis-à-vis recessive and dominant phenotypes. As previously reported, amino acid substitutions with side chains larger than valine confer dominant lethal phenotypes. Alone, these mutant proteins appear to have little or no biological activity but rather require the wild-type protein to interact with other structural proteins. Proteins with conservative substitutions for G61, serine and alanine, have now been characterized. Unlike the dominant lethal proteins, these proteins do not require wild-type subunits to interact with other viral proteins and cause assembly defects reminiscent of those conferred by the lethal dominant proteins in concert with wild-type subunits. Although atomic structures suggest that only a glycine residue can provide the proper torsion angle for assembly, mutants that can productively utilize the altered external scaffolding proteins were isolated, and the mutations were mapped to the coat and internal scaffolding proteins. Thus, the ability to isolate strains that could utilize the single mutant D protein species would not have been predicted from past structural analyses.

Scaffolding proteins altered in the ability to perform a conformational switch confer dominant lethal assembly defects

In the phiX174 procapsid crystal structure, 240 external scaffolding protein D subunits form 60 pairs of asymmetric dimers, D(1)D(2) and D(3)D(4), in a non-quasi-equivalent structure. To achieve this arrangement, alpha-helix 3 assumes two different conformations: (i) kinked 30 degrees at glycine residue 61 in subunits D(1) and D(3) and (ii) straight in subunits D(2) and D(4). Substitutions for G61 may inhibit viral assembly by preventing the protein from achieving its fully kinked conformation while still allowing it to interact with other scaffolding and structural proteins. Mutations designed to inhibit conformational switching in alpha-helix 3 were introduced into a cloned gene, and expression was demonstrated to inhibit wild-type morphogenesis. The severity of inhibition appears to be related to the size of the substituted amino acid. For infections in which only the mutant protein is present, morphogenesis does not proceed past the first step that requires the wild-type external scaffolding protein. Thus, mutant subunits alone appear to have little or no morphogenetic function. In contrast, assembly in the presence of wild-type and mutant subunits is blocked prematurely, before D protein is required in a wild-type infection, or channeled into an off-pathway reaction. These data suggest that the wild-type protein transports the inhibitory protein to the pathway. Viruses resistant to the lethal dominant proteins were isolated, and mutations were mapped to the coat and internal scaffolding proteins. The affected amino acids cluster in the atomic structure and may act to exclude mutant subunits from occupying particular positions atop pentamers of the viral coat protein.

Incorporation of scaffolding protein gpO in bacteriophages P2 and P4

Scaffolding proteins act as chaperones for the assembly of numerous viruses, including most double-stranded DNA bacteriophages. In bacteriophage P2, an internal scaffolding protein, gpO, is required for the assembly of correctly formed viral capsids. Bacteriophage P4 is a satellite phage that has acquired the ability to take control of the P2 genome and use the P2 capsid protein gpN to assemble a capsid that is smaller than the normal P2 capsid. This size determination is dependent on the P4 external scaffolding protein Sid. Although Sid is sufficient to form morphologically correct P4-size capsids, the P2 internal scaffolding protein gpO is required for the formation of viable capsids of both P2 and P4. In most bacteriophages, the scaffolding protein is either proteolytically degraded or exits intact from the capsid after assembly. In the P2/P4 system, however, gpO is cleaved to an N-terminal fragment, O(*), that remains inside the mature capsid after DNA packaging. We previously showed that gpO exhibits autoproteolytic activity, which is abolished by removal of the first 25 amino acids. Co-expression of gpN with this N-terminally truncated version of gpO leads to the production of immature P2 procapsid shells. Here, we use protein analysis and mass spectroscopy to show that P2 and P4 virions as well as procapsids isolated from viral infections contain O(*) and that cleavage occurs between residues 141 and 142 of gpO. By co-expression of gpN with truncated gpO proteins, we show that O(*) binds to gpN and retains the proteolytic activity of gpO and that the C-terminal 90 residues of gpO (residues 195-284) are sufficient to promote the formation of P2-size procapsids. Using mass spectrometry, we have also identified the head completion protein gpL in the virions.

Mechanisms of genome propagation and helper exploitation by satellite phage P4

Temperate coliphage P2 and satellite phage P4 have icosahedral capsids and contractile tails with side tail fibers. Because P4 requires all the capsid, tail, and lysis genes (late genes) of P2, the genomes of these phages are in constant communication during P4 development. The P4 genome (11,624 bp) and the P2 genome (33.8 kb) share homologous cos sites of 55 bp which are essential for generating 19-bp cohesive ends but are otherwise dissimilar. P4 turns on the expression of helper phage late genes by two mechanisms: derepression of P2 prophage and transactivation of P2 late-gene promoters. P4 also exploits the morphopoietic pathway of P2 by controlling the capsid size to fit its smaller genome. The P4 sid gene product is responsible for capsid size determination, and the P2 capsid gene product, gpN, is used to build both sizes. The P2 capsid contains 420 capsid protein subunits, and P4 contains 240 subunits. The size reduction appears to involve a major change of the whole hexamer complex. The P4 particles are less stable to heat inactivation, unless their capsids are coated with a P4-encoded decoration protein (the psu gene product). P4 uses a small RNA molecule as its immunity factor. Expression of P4 replication functions is prevented by premature transcription termination effected by this small RNA molecule, which contains a sequence that is complementary to a sequence in the transcript that it terminates.

Regulation of icosahedral virion capsid size by the in vivo activity of a cloned gene product

Determination of icosahedral virion capsid size can be directly studied during helper-dependent lytic development of satellite P4 because the assembly pathway specified by the P2 helper virus is altered to yield smaller-sized capsids. Size determination (sid) mutations identify a P4-encoded function regulating this process. To determine whether the sid gene product is necessary and sufficient to redirect the assembly pathway, we (i) cloned the sid structural gene in a plasmid vector (pMA30) under the control of an inducible promoter and (ii) constructed a packaging substrate (pMA1), a P4 genome-sized plasmid containing only that region of P4, the cos site, necessary for encapsidation. Superinfection by P2 of a host carrying pMA30 under induced conditions resulted in a shift from large to small capsid production. P2 superinfection of a host carrying the cos plasmid pMA1 plus pMA30 under induced conditions yielded pMA1-transducing particles of P4 capsid size. These cloning-based analyses directly demonstrate that sid protein is the only P4 gene product required for small-capsid size determination. In the absence of the P2 O gene product no capsids of any size are assembled during solo infection by P2. Nevertheless, P2 Oam mutant superinfection of a host carrying pMA1 and pMA30 under induced conditions yielded small P4-sized transducing particles. We therefore propose that (i) the sid gene product competes with the O gene product to determine the assembly of small vs. large capsid sizes and (ii) both gene products probably function as temporary scaffolding proteins.

Propagation of satellite phage P4 as a plasmid

Satellite phage P4 has two known options for propagation. In its lytic cycle, its regulatory functions can act in trans to alter the actions of a helper virus (P2), which then provides necessary gene products, including capsid proteins. P4 also can be propagated in the absence of a helper as a prophage, with distinct sites for integration within the Escherichia coli chromosome. We determined that a single spontaneous mutation (vir1) of phage P4 allows a third mode of propagation: as a plasmid (along with continued integration into the host chromosome). Hence, the P4 regulatory element is capable of (i) temperate; (ii) lytic, helper-dependent; and (iii) plasmid modes of development. These findings emphasize the close relationship between defective viruses and plasmids.

Head length control in T4 bacteriophage morphogenesis: effect of canavanine on assembly

Images