Environment, Health and Safety Issues in Nanotechnology

Physicochemical characterization and oxidative potential of size fractionated Particulate Matter: Uptake, genotoxicity and mutagenicity in V-79 cells

For many years, the impact of Particulate Matter (PM) in the ambient air has been one of the major concerns for the environment and human health. The consideration of the heterogeneity and complexity of different size fractions is notably important for the assessment of PM toxicological effects. The aim of the study was to present a comprehensive size-composition-morphology characterization and to assess the oxidative potential, genotoxicity, and mutagenicity of the atmospheric PM fractions, collected by using MOUDI near a busy roadside in Lucknow, India. Physicochemical characterization of ambient coarse particles (1.8-10 µm), fine particles (0.32-1.8 µm), quasi-ultrafine (0.1-0.32 µm) and ultrafine particles (≤0.1 µm) along with SRM 1649b was done using TEM, SEM, DLS, NTA, ICP-MS, and IC in parallel with the estimation of exogenous Reactive Oxygen Species (ROS) by acellular assays. In this study, two different acellular assays, dithiothreitol (DTT) and the CM-H₂DCFDA assay, indicated stronger mass-normalized bioactivity for different size ranges. Enrichment factor analysis indicated that the different size fractions were highly enriched with elements of anthropogenic origin as compared to elements of crustal origin. The endotoxin concentration in different size fractions was also estimated. Cellular studies demonstrated significant uptake, cytotoxicity, ultrastructural changes, cellular ROS generation, and changes in the different phases of the cell cycle (Sub G1, G1, S, G2/M) exposed to different size fractions. The Comet assay and the Micronucleus assay were used to estimate genotoxicity. Mutagenic potential was revealed by the HGPRT gene forward mutation assay in V-97 cells. Conclusively, our results clearly indicate that the genotoxic and mutagenic potential of the coarse PM was greater than the other fractions, and interestingly, the ultrafine PM has higher bioactivity as compared to quasi-ultrafine PM.

Recovery profile of anaerobic ammonium oxidation (anammox) bacteria inhibited by ZnO nanoparticles

The potential effects of nanoparticles (NPs) on biological treatment processes have become significant due to their increasing industrial applications. The purpose of this research was to investigate the self-recovery ability of anammox bacteria following acute ZnO NPs toxicity. In this context, a 2-liter lab-scale anammox reactor was operated for 550 days to enrich the biomass required to the batch exposure tests. Anammox culture was firstly exposed to four different doses of ZnO NPs (50, 75, 100 and 200 mg/L) for 24 h. Then, the ZnO NPs were removed and self-recovery performance of the anammox bacteria was assessed by evaluating the nitrogen removal capacities for 72 h. Besides the nitrogen removal performance, extracellular polymeric substances (EPS) production was also detected to deeply understand the response of the enriched anammox culture against ZnO NPs exposure. The results revealed that sudden and high load of ZnO NPs (100 and 200 mg/L) resulted in persistent impairment to the nitrogen removal performance of the enriched anammox culture. However, relatively lower doses (50 and 75 mg/L) caused deceleration of the nitrogen removal performance during the recovery period. In addition, EPS content in the reactor decreased along with escalating load of ZnO NPs.

Assessment of Anammox process against acute and long-term exposure of ZnO nanoparticles

The impacts of nanoparticles (NPs) on wastewater treatment have become a great concern because of their widespread applications. Although the acute responses of anammox bacteria to NPs have enhanced the knowledge about the potential risks of them, deep understanding of the cumulative impacts of NPs must be assessed. The purpose of this research was therefore to further extend the current knowledge by evaluating both acute and long-term effects of Zinc oxide (ZnO) NPs on Anammox process based on nitrogen removal performance, self-recovery ability and microbial community structure. The acute exposure tests indicated that, the median inhibition concentration (IC50) of ZnO NPs on Anammox process was 84.7 mg/L (54.82 mg ZnO NPs/g VSS). Acute exposure of 200 mg/L ZnO NPs (117.54 mg Zn/g VSS) caused 80% inhibition in batch assays while the long-term inhibition dosage was 100 mg/L ZnO NPs (187.50 mg ZnO NPs/g VSS) corresponding to 1022 mg/L total Zn (1916.27 mg Zn/g VSS) in the reactor due to the accumulation of NPs. Total, soluble and biomass-associated Zn concentrations were measured throughout the long-term exposure to observe the behavior of ZnO NPs in the reactor. Total Zn in the reactor was cumulatively increased and mostly originated from biomass-associated Zn. Following the long-term inhibition tests, self-recovery of Anammox process within 120 days demonstrated that, the ZnO NPs inhibition is reversible for the applied dose. Furthermore, next generation sequencing results indicated a symbiotic relationship between the microbial groups in the anammox bioreactor while relative abundance of Candidatus (Ca.) Brocadiaceae family showed a decrease parallel to the deterioration in nitrogen removal performance of bioreactor. At the end of the long-term exposure studies, 48.76% decline on anammox quantity was detected.