Gelation with Small Molecules: from Formation Mechanism to NanostructureArchitecture

Harnessing Glycolipids for Supramolecular Gelation: A Contemporary Review

Within the scope of this review, our exploration spans diverse facets of amphiphilic glycolipid-based low-molecular-weight gelators (LMWGs). This journey explores glycolipid synthesis, self-assembly, and gelation with tailorable properties. It begins by examining the design of glycolipids and their influence on gel formation. Following this, a brief exploration of several gel characterization techniques adds another layer to the understanding of these materials. The final section is dedicated to unraveling the various applications of these glycolipid-based supramolecular gels. A meticulous analysis of available glycolipid gelators and their correlations with desired properties for distinct applications is a pivotal aspect of their investigation. As of the present moment, there exists a notable absence of a review dedicated exclusively to glycolipid gelators. This study aims to bridge this critical gap by presenting an overview that provides novel insights into their unique properties and versatile applications. This holistic examination seeks to contribute to a deeper understanding of molecular design, structural characteristics, and functional applications of glycolipid gelators by offering insights that can propel advancements in these converging scientific disciplines. Overall, this review highlights the diverse classifications of glycolipid-derived gelators and particularly emphasizes their capacity to form gels.

Novel Organogels from Mauritia flexuosa L.f and Caryodendron orinocense Karst.: A Topical Alternative

Organogels have importance for topical applications because they can be used to deliver drugs in a controlled and prolonged fashion. These are materials consisting of a three-dimensional network of organic molecules dispersed in a solvent. Recent studies have demonstrated that the solvent could be replaced by oils from non-conventional biologic sources. There is a diversity of not-explored species in the Amazon that are promising sources of vegetable oils with a promising composition. This study developed an organogel with buriti (Mauritia flexuosa L.f) and cacay (Caryodendron orinocense Karst.) oils, using cetostearyl alcohol as an organogelator due to its compatibility, stability, security, affordability, and it is readily available. The oils were characterized, and the organogels were synthesized by studying their crystal evolution and oil-binding capacity. The microstructure was evaluated with polarized light microscopy, fractal dimension, FTIR spectroscopy, XRD, and thermal and rheological analyses. It was found that the critical gelation concentration was higher for cacay oil as it possessed a higher amount of polyunsaturated triacylglycerols. The crystals of the buriti organogel had a smaller lamellar shape, a greater surface area, and physical and thermal stability; although, it presented a slower crystal evolution due to the low number of minor compounds and a greater number of saturated triacylglycerols. The polar fraction of the organogelators as well as triacylglycerol and minor polar compounds are important in forming crystallization nuclei. The study showed that Amazonian oils in crystallization processes form microstructures with differentiating physicochemical properties.

Suberic Acid-Based Supramolecular Metallogels of Ni(II), Zn(II), and Cd(II) for Anti-Pathogenic Activity and Semiconducting Diode Fabrication

The importance of three synthesized metallogels of suberic acid distinctly with nickel, zinc, and cadmium acetate salts has been uncovered. For the creation of these soft materials, N,N'-dimethyl formamide was utilized as a source of the trapped solvent. The synthesized metallogels display intriguing viscoelasticity, and the interpretation of experimental parameters obtained from rheological results advocates the gel behavior. Microstructural analysis combined with energy-dispersive X-ray confirms the occurrence of individual gel-developing constituents as observed in different hierarchical microstructural patterns. Significant variations in microstructural arrangements with diverse extent of supramolecular non-covalent patterns inside gel networks were perceived through field emission scanning electron microscopy, atomic force microscopy, and transmission electron microscopy analyses. Fourier transform infrared and electrospray ionization-mass spectral analyses and powder X-ray diffraction analysis of metallogel samples of different gel-establishing ingredients help to investigate the possible supramolecular interactions dictating the metallogel scaffolds. Thermogravimetric analysis of xerogel samples was collected from the synthesized metallogels to understand the thermal stability. These gel materials were characterized by their potential antibacterial efficiency. The potency of metallogels against selective Gram-positive and Gram-negative bacteria was visualized via a spectrophotometer. Human pathogens like Klebsiella pneumoniae (MTCC 109), Salmonella typhi (MTCC 733), Vibrio parahaemolyticus, Bacillus cereus (MTCC 1272), Lactobacillus fermentum (NCDO 955), and Staphylococcus aureus (MTCC 96) are employed in this study. Apart from the biological significance, our metallogels demonstrate as incredible diode performance of fabricated semiconducting systems, which exhibit a considerable amount of non-linearity demonstrating a non-ohmic conduction mechanism at room temperature in dark conditions. Device fabrication was achieved from these metallogels employing the sandwich model with indium tin oxide-coated glass substrates/metallogel/Al structure.

Recent advances on small molecular gels: formation mechanism and their application in pharmaceutical fields

INTRODUCTION

As an essential complement to chemically cross-linked macromolecular gels, drug delivery systems based on small molecular gels formed under the driving forces of non-covalent interactions are attracting considerable research interest due to their potential advantages of high structural functionality, lower biological toxicity, reversible stimulus-response, and so on.

AREA COVERED

The present review summarizes recent advances in small molecular gels and provides their updates as a comprehensive overview in terms of gelation mechanism, gel properties, and physicochemical characterizations. In particular, this manuscript reviews the effects of drug-based small molecular gels on the drug development and their potential applications in the pharmaceutical fields.

EXPERT OPINION

Small molecular-based gel systems, constructed by inactive compounds or active pharmaceutical ingredients, have been extensively studied as carriers for drug delivery in pharmaceutical field, such as oral formulations, injectable formulations, and transdermal formulations. However, the construction of such gel systems yet faces several challenges such as rational and efficient design of functional gelators and the great occasionality of drug-based gel formation. Thus, a deeper understanding of the gelation mechanism and its relationship with gel properties will be conducive to the construction of small molecular gels systems and their future application.

Gamma Radiation- and Ultraviolet-Induced Polymerization of Bis(amino acid)fumaramide Gel Assemblies

Controlling the polymerization of supramolecular self-assembly through external stimuli holds great potential for the development of responsive soft materials and manipulation at the nanoscale. Vinyl esters of bis(leu or val)fumaramide (1a and 2a) have been found to be gelators of various organic solvents and were applied in this investigation of the influence of organogelators’ self-assembly on solid-state polymerization induced by gamma and ultraviolet irradiation. Here, we report our investigation into the influences of self-assemblies of bis(amino acid vinyl ester)fumaramides on gamma-ray- and ultraviolet-induced polymerization. The gelator molecules self-assembled by non-covalent interactions, mainly through hydrogen bonds between the amide group (CONH) and the carboxyl group (COO), thus forming a gel network. NMR and FTIR spectroscopy were used to investigate and characterize supramolecular gels. TEM and SEM microscopy were used to investigate the morphology of gels and polymers. Morphology studies showed that the gels contained a filamentous structure of nanometer dimensions that was exhaustive in a three-dimensional network. The prepared derivatives contained reactive alkyl groups suitable for carrying out the polymerization reaction initiated by gamma or ultraviolet radiation in the supramolecular aggregates of selected gels. It was found that the polymerization reaction occurred only in the network of the gel and was dependent on the structure of aggregates or the proximity and orientation of double bonds in the gel network. Polymers were formed by the gels exposure to gamma and ultraviolet radiation in toluene, and water/DMF gels with transcripts of their gel structure into polymers. The polymeric material was able to immobilize various solvents by swelling. Furthermore, methyl esters of bis(leu and val)fumaramide (1b and 2b) were synthesized; these compounds showed no gelling properties, and the crystal structure of the valine derivative 2b was determined.

Demonstrating Aqueous-Phase Low-Molecular-Weight-Gel Wicking of Oil for the Remediation of Oil Spilled into Surface Water

Oils spilled into surface water require effective and timely treatment. In this paper, we report on a low-molecular-weight gelator that can form gels in organic and aqueous phases. The aqueous gel was observed to absorb oils, which is proposed as a new class of materials for remediating oil spilled into surface water. The gels and the low-molecular-weight gelator have both fundamental and applied significance. Fundamentally, identifying the mechanisms that govern the formation of these gels and their resultant mechanical properties is of interest. Subsequently, these fundamental insights aid in the optimization of these gels for addressing spilled oil. First, we briefly compare the organic and aqueous gels qualitatively before focusing on the aqueous gel. Second, we demonstrate the ability of the aqueous gel to wick oils through experiments in a Hele-Shaw cell and compare our results to the Washburn equation for porous media. The Washburn equation is not entirely adequate in describing our results due to the change in volume of the porous media during the wicking process. Finally, we investigate mechanisms proposed to govern the formation of low-molecular-weight gels in the literature through rheological shear measurements during gel formation. Our experiments suggest that the proposed mechanisms are applicable to our aqueous gels, growing as anisotropic crystal networks with fractal dimensions between one and two dimensions from temporally sporadic nucleation sites.

Dual-Balance Electrodynamic Trap as a Microanalytical Tool for Identifying Gel Transitions and Viscous Properties of Levitated Aerosol Particles

The formation of gelatinous networks within an aerosol particle significantly alters the physicochemical properties of the aerosol material. Existing techniques for studying gel transitions rely on bulk rheometry, which is limited by contact with the sample, or microrheological techniques such as holographic optical tweezers, which rely on expensive equipment and high-powered lasers that can degrade light-absorbing aerosol. Here, we present a new technique to probe the microrheological characteristics of aerosol particles and explore gel formation under atmospheric conditions in a contactless environment without the need for high-power light sources. In a dual-balance quadrupole electrodynamic balance, levitated droplets of opposite polarity are trapped and equilibrated at fixed relative humidity (RH) and then subsequently merged, and the physical characteristics of the merged droplets are monitored as a function of time and RH using imaging techniques. By comparing the RH-dependent characteristics of MgSO₄ (known to undergo a gel transition) to glucose and sucrose (known to remain as viscous Newtonian fluids) under fixed equilibration time scales, we demonstrate that gel phase transitions can be identified in aerosol particles, with MgSO₄ abruptly transitioning to a rigid microgel at 30% RH. Further, we demonstrate this technique can be used to also measure aerosol viscosity and identify non-Newtonian fluid dynamics in model sea spray aerosol composed of NaCl, CaCl₂, and sorbitol. Thus, using this experimental technique, it is possible to distinguish between aerosol compositions that form viscous Newtonian fluids and those that undergo a gel transition or form non-Newtonian fluids. This technique offers a simple and cost-effective analytical tool for probing gel transitions outside of bulk solubility limits, with relevant applications ranging from atmospheric science to microengineering of soft matter materials.

Halobenzyl alcohols as structurally simple organogelators

We report 11 simple halobenzyl alcohols, each comprising of only 16 atoms, as organogelators for aliphatic hydrocarbon solvents. Their self-assembly is similar in both gel and crystal states and involve OH⋯O, CH⋯O, CH⋯π, O⋯X, CH⋯X and X⋯X interactions.

Bio-based glyco-bolaamphiphile forms a temperature-responsive hydrogel with tunable elastic properties

A bio-based glycolipid bolaamphiphile (glyco-bolaamphiphile) has recently been produced (Van Renterghem et al., Biotechnol. Bioeng., 2018, 115, 1195-1206) on a gram scale by using the genetically-engineered S. bombicola strain Δat Δsble Δfao1. The glyco-bolaamphiphile bears two symmetrical sophorose headgroups at the extremities of a C16:0 (ω-1 hydroxylated palmitic alcohol) spacer. Its atypical structure has been obtained by redesigning the S. bombicola strain Δat Δsble, producing non-symmetrical glyco-bolaamphiphile, with an additional knock out (Δfao1) and feeding this new strain with fatty alcohols. The molecular structure of the glyco-bolaamphiphile is obtained by feeding the new strain a saturated C16 substrate (palmitic alcohol), which enables the biosynthesis of bolaform glycolipids. In this work, we show that the bio-based glyco-bolaamphiphile readily forms a hydrogel in water at room temperature, and that the hydrogel formation depends on the formation of self-assembled fibers. Above 28 °C, the molecules undergo a gel-to-sol transition, which is due to a fiber-to-micelle phase change. We provide a quantitative description of the Self-Assembled Fibrillar Network (SAFiN) hydrogel formed by the glyco-bolaampiphile. We identify the sol-gel transition temperature, the gelling time, and the minimal gel concentration; additionally, we explore the fibrillation mechanism as a function of time and temperature and determine the activation energy of the micelle-to-fiber phase transition. These parameters allow control of the elastic properties of the glyco-bolaamphiphile hydrogel: at 3 wt% and 25 °C, the elastic modulus G' is above the kPa range, while at 5 °C, G' can be tuned between 100 Pa and 20 kPa, by controlling the undercooling protocol.

Organogel-Derived Covalent-Noncovalent Hybrid Polymers as Alkali Metal-Ion Scavengers for Partial Deionization of Water

We show that crown ethers (CEs) 1-5 congeal both polar and nonpolar solvents via their self-assembly through weak noncovalent interactions (NCIs) such as CH···O and CH···π interactions. Diisopropylidene-mannitol (6) is a known gelator that self-assembles through stronger OH···O H bonding. These two gelators together also congeal nonpolar solvents via their individual self-assembly. Gelator 6 self-assembles swiftly to fibers, which act as templates and attract CE to their surface through H bonding and thereby facilitate their self-assembly through weak NCI. Polymerization of styrene gels made from CE and 6, followed by the washing off of the sacrificial gelator 6, yields robust porous polystyrene-crown ether hybrid matrices (PCH), having pore-exposed CEs. These PCHs not only were efficient in sequestering alkali metal ions from aqueous solutions but also can be recycled. This novel use of organogels for making solid sorbents for metal-ion scavenging might be of great interest.

Gelatinizing oil in water and its removal via bacteria inhabiting the gels

When crude oil samples were shaken (200 rpm) in seawater samples from the Arabian Gulf at 30 °C, usually oil-gels were produced spontaneously leaving the water quite clear. The gelators could probably be based on cholesteryl derivatives. Microscopic examination of the established gels revealed nanofibrellar structures similar to those described by earlier workers for artificially synthesized gelators. Communities of bacteria including prosthetic and stalked members as well as oil-degrading bacteria were recorded in such gels. Chemical analysis revealed that 88.5% of the oil entrapped by gelation was biodegraded after 40 days at 30 °C. Individual bacterial species isolated from the oil-gels biodegraded in batch cultures between 17.8 and 33.3% of the oil added at time zero in 12 days at 30 °C. Gelation is a promising approach, not only for clean, physical removal of oil spilled in aquatic habitats, as so far suggested, but also in its effective microbiological biodegradation, as the current study revealed.

Self-assembled fibrillar networks of a multifaceted chiral squaramide: supramolecular multistimuli-responsive alcogels

Chiral N,N'-disubstituted squaramide has been found to undergo self-assembly in a variety of alcoholic solvents at low concentrations leading to the formation of novel nanostructured supramolecular alcogels. The gels responded to thermal, mechanical, optical and chemical stimuli. Solubility studies, gelation ability tests and computer modeling of a series of structurally related squaramides proved the existence of a unique combination of non-covalent molecular interactions and favorable hydrophobic/hydrophilic balance in that drive the anisotropic growth of alcogel networks. The results have also revealed a remarkable effect of ultrasound on both the gelation kinetics and the properties of the alcogels.

Supramolecular gels based on boronate esters and imidazolyl donors

Dative boron-nitrogen bonds can be used for the controlled assembly of boronate esters and N-donor ligands. So far, most investigations have focused on crystalline assemblies. In contrast, there are very few reports about soft materials based on dative B-N bonds. Here, we describe the formation of gels by aggregation of diboronate esters and ditopic bisimidazolyl donor ligands. Analyses of low molecular weight model compounds by NMR spectroscopy, isothermal titration calorimetry, and X-ray crystallography reveal that imidazolyl ligands form particularly strong dative bonds with boronate esters. The strong interaction allows gel formation in competitive polar solvents such as THF and acetone. In less polar solvents, very low critical gel concentrations of down to 0.02 wt% are observed. By using a diboronate ester linked by an azobenzene group, it is possible to form a photoresponsive gel.

Dissecting kinetic pathways to formation of the fibrillar objects in molecular gels using synchrotron FT-IR

Infra-red synchrotron radiation is used to monitor the formation of fibrillar networks as sols of simple gelators become gels.

Study of the effect of polymorphism on the self-assembly and catalytic performance of an l-proline based molecular hydrogelator

Polymorphs of a self-assembled proline-based catalyst lead to different catalytic results in a direct aldol reaction.

Exploiting molecular self-assembly: from urea-based organocatalysts to multifunctional supramolecular gels

We describe the self-assembly properties of chiral N,N'-disubstituted urea-based organocatalyst 1 that leads to the formation of hierarchical supramolecular gels in organic solvents at low concentrations. The major driving forces for the gelation are hydrogen bonding and π-π interactions according to FTIR and (1)H NMR spectroscopy, as well as quantum-mechanical studies. The gelation scope could be interpreted based on Kamlet-Taft solvatochromic parameters. TEM, SEM, and AFM imaging revealed that a variety of morphologies including helical, laths, porous, and lamellar nanostructures could be obtained by varying the solvent. Experimental gelation tests and computational structural analysis of various structurally related compounds proved the existence of a unique set of molecular interactions and an optimal hydrophilic/hydrophobic balance in 1 that drive the formation of stable gels. Responses to thermal, mechanical, optical, and chemical stimuli, as well as multifunctionality were demonstrated in some model gel materials. Specifically, 1 could be used for the phase-selective gelation of organic solvent/water mixtures. The gel prepared in glycerol was found to be thixotropic and provided a sensitive colorimetric method for the detection of Ag(I) ions at millimolar concentrations in aqueous solution. Moreover, the gel matrix obtained in toluene served as a nanoreactor for the Friedel-Crafts alkylation of 1H-indole with trans-β-nitrostyrene.

The past, present, and future of molecular gels. What is the status of the field, and where is it going?

A Perspective is presented on the history and current understanding of molecular gels and the factors that must be considered to characterize them. The abilities of the most important structural, dynamic, and rheological tools available currently to provide the information necessary to follow the formation of a molecular gel from its initial sol phase and then to define it at different distance and time scales are discussed. Approaches to determining a priori when a molecule will gelate a selected liquid, as well as possible methodologies for overcoming current limitations in understanding molecular gels, are presented. Finally, some of the many potential and realized applications for these materials are enumerated.

Substrate selective catalytic molecular hydrogels: the role of the hydrophobic effect

A catalytic hydrogel is reported for the substrate selective direct aldol reaction of aliphatic ketones based on their hydrophobicity and on the emergence of catalytic activity only after self-assembly of the catalyst.

Co-assembly of tetrapeptides into complex pH-responsive molecular hydrogel networks

Here we prepare pH-responsive complex molecular hydrogels from oppositely charged tetrapeptidic components that can be pH-tuned resulting in interconversion between different networks.

A four-component organogel based on orthogonal chemical interactions

A thermoresponsive organogel was obtained by orthogonal assembly of four compounds using dynamic covalent boronate ester and imine bonds, as well as dative boron–nitrogen bonds.

Experimental modelling of single-particle dynamic processes in crystallization by controlled colloidal assembly

A comprehensive review of the experimental modeling of single particle dynamics in crystallization is presented.

In situ formation of steroidal supramolecular gels designed for drug release

In this work, a steroidal gelator containing an imine bond was synthesized, and its gelation behavior as well as a sensitivity of its gels towards acids was investigated. It was shown that the gels were acid-responsive, and that the gelator molecules could be prepared either by a conventional synthesis or directly in situ during the gel forming process. The gels prepared by both methods were studied and it was found that they had very similar macro- and microscopic properties. Furthermore, the possibility to use the gels as carriers for aromatic drugs such as 5-chloro-8-hydroxyquinoline, pyrazinecarboxamide, and antipyrine was investigated and the prepared two-component gels were studied with regard to their potential applications in drug delivery, particularly in a pH-controlled drug release.

Electronically and ionically conductive gels of ionic liquids and charge-transfer tetrathiafulvalene-tetracyanoquinodimethane

Electronically and ionically conductive gels were fabricated by mixing and mechanically grinding neutral tetrathiafulvalene (TTF) and tetracyanoquinodimethane (TCNQ) in ionic liquids (ILs) like 3-ethyl-1-methylimidazolium dicyanoamide (EMIDCA), 1-ethyl-3-methylimidazolium thiocyanate (EMISCN), 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EMITf(2)N), trihexyltetradecylphosphonium bis(trifluoromethylsulfonyl)imide (P(14,6,6,6)Tf(2)N), and methyl-trioctylammonium bis(trifluoromethylsulfonyl)imide (MOATf(2)N). Charge-transfer TTF-TCNQ crystallites were generated during the mechanical grinding as indicated by the UV-visibile-near-infrared (UV-vis-NIR) absorption spectroscopy, Fourier transform infrared (FTIR) spectroscopy, and X-ray diffraction. The charge-transfer TTF-TCNQ crystallites have a needle-like shape. They form solid networks to gelate the ILs. The gel behavior is confirmed by the dynamic mechanical measurements. It depends on both the anions and cations of the ILs. In addition, when 1-methyl-3-butylimidazolium tetrafluoroborate (BMIBF(4)) and 1-methyl-3-propylimidazolium iodide (PMII) were used, the TTF-TCNQ/IL mixtures did not behave as gels. The TTF-TCNQ/IL gels are both electronically and ionically conductive, because the solid phase formed by the charge-transfer TTF-TCNQ crystallites is electronically conductive, while the ILs are ionically conductive. The gel formation is related to needle-like charge-transfer TTF-TCNQ cyrstallites and the π-π and Coulombic interactions between TTF-TCNQ and ILs.