Purification and crystallization of Photosystem I complex from a phycobilisome-less mutant of the cyanobacterium Synechococcus PCC 7002

The use of native gels for the concomitant determination of protein sequences and modifications by mass spectrometry with subsequent conformational and functional analysis of native proteins following electro-elution

The protocol consists of running a native gel with in-gel digestion by proteases, subsequent mass spectrometrical determination of protein sequence and modifications, followed by electro-elution and conformational analysis using melting point and circular dichroism. Finally, the eluted protein is tested for preserved function. Herein, C1 esterase inhibitor is applied on a native gel; in-gel digestion by proteases is carried out and peptides are identified by nano-LC-ESI-CID/ETD-MS/MS using an ion trap for generation of peptide sequences and protein modifications. Protein from replicate bands from the same gel is electro-eluted and used for determination of the melting point and used for circular dichroism analysis. Additional bands from the native gel are either in-gel digested with asparaginase to generate deamidation or PNGase F for deglycosylation, followed by mass spectrometry, conformational and functional studies. Preserved conformation and function of the C1 esterase inhibitor was shown. This protocol can be completed in 1 week.

Characterization of photosystem I from spinach: effect of solution pH

Our previous work has demonstrated the isolation of photosystem I (PSI) from spinach using ultrafiltration with a final purity of 84%. In order to get a higher purity of PSI and more importantly to develop a practical bioseparation process, key physiochemical properties of PSI and their dependence on operational parameters must be assessed. In this study, the effect of solution pH, one of the most important operating parameters for membrane process, on the property of PSI was examined. Following the isolation of crude PSI from spinach using n-dodecyl-beta-D: -maltoside as detergent, the isoelectric point, aggregation size, zeta potential, low-temperature fluorescence, atomic force microscopy imaging, secondary structure, and thermal stability were determined. Solution pH was found to have a significant effect on the activity, aggregation size and thermal stability of PSI. The results also suggested that the activity of PSI was related to its aggregation size.

A novel membrane based process to isolate photosystem-I membrane complex from spinach

The isolation of photosystem-I (PS-I) from spinach has been conducted using ultrafiltration with 300 kDa molecular weight cut-off polyethersulfone membranes. The effects of ultrafiltration operating conditions on PS-I activity were optimized using parameter scanning ultrafiltration. These conditions included solution pH, ionic strength, stirring speed, and permeate flux. The effects of detergent (Triton X-100 and n-dodecyl-beta-D-maltoside) concentration on time dependent activity of PS-I were also studied using an O(2) electrode. Under optimized conditions, the PS-I purity obtained in the retentate was about 84% and the activity recovery was greater than 94% after ultrafiltration. To our knowledge, this is the first report of the isolation of a membrane protein using ultrafiltration alone.

Preparative isolation of protein complexes and other bioparticles by elution from polyacrylamide gels

Due to its unmatched resolution, gel electrophoresis is an indispensable tool for the analysis of diverse biomolecules. By adaptation of the electrophoretic conditions, even fragile protein complexes as parts of intracellular networks migrate through the gel matrix under sustainment of their integrity. If the thickness of such native gels is significantly increased compared to the analytical version, also high sample loads can be processed. However, the cage-like network obstructs an in-depth analysis for deciphering structure and function of protein complexes and other species. Consequently, the biomolecules have to be removed from the gel matrix into solution. Several approaches summarized in this review tackle this problem. While passive elution relies on diffusion processes, electroelution employs an electric field to force biomolecules out of the gel. An alternative procedure requires a special electrophoresis setup, the continuous elution device. In this apparatus, molecules migrate in the electric field until they leave the gel and were collected in a buffer stream. Successful isolation of diverse protein complexes like photosystems, ATP-dependent enzymes or active respiratory supercomplexes and some other bioparticles demonstrates the versatility of preparative electrophoresis. After liberating particles out of the gel cage, numerous applications are feasible. They include elucidation of the individual components up to high resolution structures of protein complexes. Therefore, preparative electrophoresis can complement standard purification methods and is in some cases superior to them.

A comparative approach towards thylakoid membrane proteome analysis of unicellular green alga Scenedesmus obliquus

The chlorophyll (Chl)-containing membrane protein complexes from the green alga Scenedesmus obliquus have been isolated from the thylakoid membranes by solubilization with dodecyl-beta-maltoside and fractionation using a sucrose density gradient. The Chl-containing protein fractions were characterized by absorption spectroscopy, tricine SDS PAGE, BN-PAGE, and dynamic light scattering (DLS). BN-PAGE showed the presence of seven protein complexes with molecular weights in the range of 68, 118, 157, 320, 494, 828 and 955 kDa, respectively. Furthermore, light scattering reveals the simultaneous presence of particles of different sizes in the 3-4 nm and 6.0-7.5 nm range, respectively. The smaller size is related to the hydrodynamic radius of the trimer Light Harvesting Complex (LHCII), whereas the larger size is associated with the presence of photosystem I and photosystem II reaction centers. Additionally, functional information regarding protein-protein interactions was deconvoluted using coupling 2-D BN-PAGE, MALDI-TOF MS and a detailed mapping of S. obliquus photosynthetic proteome of the solubilized thylakoid membranes is therefore presented.

Preparation of membrane proteins for analysis by two-dimensional gel electrophoresis

In order to separate hydrophobic membrane proteins, we have developed a novel two-dimensional electrophoresis system. For the iso-electric focusing, agarose was used as a supporting matrix and n-dodecyl-beta-D-maltopyranoside was used as a surfactant. In combination with a previously developed Tris/MES electrophoresis system in the second dimension, distinct spots were reproducibly detected from hydrophobic membrane proteins whose grand average hydropathicity (GRAVY) exceed 0.3. In contrast to the immobilized pH gradient system, c-type heme was also visualized in this system.

Detection and analysis of protein–protein interactions in organellar and prokaryotic proteomes by native gel electrophoresis: (Membrane) protein complexes and supercomplexes

It is an essential and challenging task to unravel protein-protein interactions in their actual in vivo context. Native gel systems provide a separation platform allowing the analysis of protein complexes on a rather proteome-wide scale in a single experiment. This review focus on blue-native (BN)-PAGE as the most versatile and successful gel-based approach to separate soluble and membrane protein complexes of intricate protein mixtures derived from all biological sources. BN-PAGE is a charge-shift method with a running pH of 7.5 relying on the gentle binding of anionic CBB dye to all membrane and many soluble protein complexes, leading to separation of protein species essentially according to their size and superior resolution than other fractionation techniques can offer. The closely related colorless-native (CN)-PAGE, whose applicability is restricted to protein species with intrinsic negative net charge, proved to provide an especially mild separation capable of preserving weak protein-protein interactions better than BN-PAGE. The essential conditions determining the success of detecting protein-protein interactions are the sample preparations, e.g. the efficiency/mildness of the detergent solubilization of membrane protein complexes. A broad overview about the achievements of BN- and CN-PAGE studies to elucidate protein-protein interactions in organelles and prokaryotes is presented, e.g. the mitochondrial protein import machinery and oxidative phosphorylation supercomplexes. In many cases, solubilization with digitonin was demonstrated to facilitate an efficient and particularly gentle extraction of membrane protein complexes prone to dissociation by treatment with other detergents. In general, analyses of protein interactomes should be carried out by both BN- and CN-PAGE.

Separation methods in the analysis of protein membrane complexes

The separation of membrane protein complexes can be divided into two categories. One category, which is operated on a relatively large scale, aims to purify the membrane protein complex from membrane fractions while retaining its native form, mainly to characterize its nature. The other category aims to analyze the constituents of the membrane protein complex, usually on a small scale. Both of these face the difficulty of isolating the membrane protein complex without interference originating from the hydrophobic nature of membrane proteins or from the close association with membrane lipids. To overcome this difficulty, many methods have been employed. Crystallized membrane protein complexes are the most successful example of the former category. In these purification methods, special efforts are made in the steps prior to the column chromatography to enrich the target membrane protein complexes. Although there are specific aspects for each complex, the most popular method for isolating these membrane protein complexes is anion-exchange column chromatography, especially using weak anion-exchange columns. Another remarkable trend is metal affinity column chromatography, which purifies the membrane protein complex as an intact complex in one step. Such protein complexes contain subunit proteins which are genetically engineered so as to include multiple-histidine tags at carboxyl- or amino-termini. The key to these successes for multi-subunit complex isolation is the idea of keeping the expression at its physiological level, rather than overexpression. On the other hand, affinity purification using the Fv fragment, in which a Strep tag is genetically introduced, is ideal because this method does not introduce any change to the target protein. These purification methods supported by affinity interaction can be applied to minor membrane protein complexes in the membrane system. Isoelectric focusing (IEF) and blue native (BN) electrophoresis have also been employed to prepare membrane protein complexes. Generally, a combination of two or more chromatographic and/or electrophoretic methods is conducted to separate membrane protein complexes. IEF or BN electrophoresis followed by 2nd dimension electrophoresis serve as useful tools for analytical demand. However, some problems still exist in the 2D electrophoresis using IEF. To resolve such problems, many attempts have been made, e.g. introduction of new chaotropes, surfactants, reductants or supporting matrices. This review will focus in particular on two topics: the preparative methods that achieved purification of membrane protein complexes in the native (intact) form, and the analytical methods oriented to resolve the membrane proteins. The characteristics of these purification and analytical methods will be discussed along with plausible future developments taking into account the nature of membrane protein complexes.

The reaction center complex from the green sulfur bacterium Chlorobium tepidum: a structural analysis by scanning transmission electron microscopy

The three-dimensional (3D) structure of the reaction center (RC) complex isolated from the green sulfur bacterium Chlorobium tepidum was determined from projections of negatively stained preparations by angular reconstitution. The purified complex contained the PscA, PscC, PscB, PscD subunits and the Fenna-Matthews-Olson (FMO) protein. Its mass was found to be 454 kDa by scanning transmission electron microscopy (STEM), indicating the presence of two copies of the PscA subunit, one copy of the PscB and PscD subunits, three FMO proteins and at least one copy of the PscC subunit. An additional mass peak at 183 kDa suggested that FMO trimers copurify with the RC complexes. Images of negatively stained RC complexes were recorded by STEM and aligned and classified by multivariate statistical analysis. Averages of the major classes indicated that different morphologies of the elongated particles (length=19 nm, width=8 nm) resulted from a rotation around the long axis. The 3D map reconstructed from these projections allowed visualization of the RC complex associated with one FMO trimer. A second FMO trimer could be correspondingly accommodated to yield a symmetric complex, a structure observed in a small number of side views and proposed to be the intact form of the RC complex.

Investigation of the structure of spinach photosystem II reaction center complex

The photosystem II (PSII) reaction center (RC) complex was isolated from spinach and characterized by gel electrophoresis, gel filtration and analytical ultracentrifugation. The purified complex contained the PsbA, PsbD, PsbE, PsbF and PsbI subunits. Gel filtration and analytical ultracentrifugation indicated the presence of a homogeneous complex. The mass of the RC complexes was found to be 107 kDa by analytical ultracentrifugation and 132 kDa by scanning transmission electron microscopy (STEM). The mass obtained showed the isolated complex to exist as a monomer and only one cytochrome b559 (cyt b559) to be associated with the RC complex. Digital images of negatively stained RC complexes were recorded by STEM and analyzed by single-particle averaging. The complex was 9 nm long and 5 nm wide, and exhibited a pronounced quasi-twofold symmetry. This supports the symmetric organization of the PSII complex, with the PsbA and the PsbD proteins in the center and symmetrically arranged PsbB and PsbC proteins at the periphery of the monomeric complex.

Surface analysis of the photosystem I complex by electron and atomic force microscopy

Two-dimensional (2D) crystals of the photosystem I (PSI) reaction center from Synechococcus sp. OD24 were analyzed by electron and atomic force microscopy. Surface relief reconstructions from electron micrographs of freeze-dried unidirectionally shadowed samples and topographs recorded with the atomic force microscope (AFM) provided a precise definition of the lumenal and stromal PSI surfaces. The lumenal surface was composed of four protrusions that surrounded an indentation. One of the protrusions, the PsaF subunit, was often missing. Removal of the extrinsic proteins with the AFM stylus exposed the stromal side of the PSI core, whose surface structure could then be imaged at a resolution better than 1.4 nm. This interfacial surface between core and extrinsic subunits, had a pseudo-2-fold symmetry and protrusions that correlated with the surface helices e and e' or were at the sites of putative alpha-helix-connecting loops estimated from the 4 A map of the complex. The molecular dissection achieved with the AFM, opens new possibilities to unveil the interfaces between subunits of supramolecular assemblies.

Structural Analysis of Photosystem II: Comparative Study of Cyanobacterial and Higher Plant Photosystem II Complexes

Oxygen evolving photosystem II (PSII-OEC) complexes and PSII core complexes were isolated from spinach and the thermophilic cyanobacterium Synechococcus sp. OD24 and characterized by gel electrophoresis, immunoblotting, and absorbance spectroscopy. The mass of the core complexes was determined by scanning transmission electron microscopy (STEM) and found to be 281 ± 65 kDa for spinach and 313 ± 52 kDa for Synechococcus sp. OD24. The mass of the spinach PSII-OEC complex was 327 ± 64 kDa. Digital images of negatively stained PSII-OEC and PSII core complexes were recorded by STEM and analyzed by single particle averaging. All monomeric complexes showed similar morphologies and were of comparable length (14 nm) and width (10 nm). The averages revealed a pseudo-twofold symmetry axis, which is a prominent structural element of the monomeric form. Difference maps between the averaged projections of the oxygen evolving complexes and the core complexes from both species indicated where the 33-kDa extrinsic manganese stabilizing protein is bound. A symmetric organization of the PSII complex, with the PsbA and the PsbD proteins in the center and symmetrically arranged PsbB and PsbC proteins at the periphery of the monomeric complex, is proposed.

Characterization of psaI and psaL mutants of Synechococcus sp. strain PCC 7002: a new model for state transitions in cyanobacteria

The psaI and psaL genes were characterized from the cyanobacterium Synechococcus sp. strain PCC 7002. The gene organization was different from that reported for other cyanobacteria with psaI occurring upstream and being divergently transcribed from the psaL gene. Mutants lacking PsaI or PsaL were generated by interposon mutagenesis and characterized physiologically and biochemically. Mutant strains PR6307 (delta psaI), PR6308 (psaI-) and PR6309 (psaL-) had doubling times similar to that of the wild type under both high- and low-intensity white light, but all grew more slowly than the wild type in green light. Only monomeric photosystem I (PS I) complexes could be isolated from each mutant strain when Triton X-100 was used to solubilize thylakoid membranes; however, approximately 10% of the PS I complexes from the psaI mutants, but not the psaL mutant, could be isolated as trimers when n-dodecyl beta-D-maltoside was used. Compositional analyses of the mutant PS I complexes indicate that the presence of PsaL is required for trimer formation or stabilization and that PsaI plays a role in stabilizing the binding of both PsaL and PsaM to the PS I complex. Strain PR6309 (psaL-) was capable of performing a state 2 to state 1 transition approximately three times more rapidly than the wild type. Because the monomeric PS I complexes of this mutant should be capable of diffusing more rapidly than trimeric complexes, these data suggest that PS I complexes rather than phycobilisomes might move during state transitions. A "mobile-PS I" model for state transitions that incorporates these ideas is discussed.

Characterization of a Synechococcus sp. strain PCC 7002 mutant lacking Photosystem I. Protein assembly and energy distribution in the absence of the Photosystem I reaction center core complex

A Synechococcus sp. strain PCC 7002 ΔpsaAB::cat mutant has been constructed by deletional interposon mutagenesis of the psaA and psaB genes through selection and segregation under low-light conditions. This strain can grow photoheterotrophically with glycerol as carbon source with a doubling time of 25 h at low light intensity (10 μE m(-2) s(-1)). No Photosystem I (PS I)-associated chlorophyll fluorescence emission peak was detected in the ΔpsaAB::cat mutant. The chlorophyll content of the ΔpsaAB::cat mutant was approximately 20% that of the wild-type strain on a per cell basis. In the absence of the PsaA and PsaB proteins, several other PS I proteins do not accumulate to normal levels. Assembly of the peripheral PS I proteins PsaC,PsaD, PsaE, and PsaL is dependent on the presence of the PsaA and PsaB heterodimer core. The precursor form of PsaF may be inserted into the thylakoid membrane but is not processed to its mature form in the absence of PsaA and PsaB. The absence of PS I reaction centers has no apparent effect on Photosystem II (PS II) assembly and activity. Although the mutant exhibited somewhat greater fluorescence emission from phycocyanin, most of the light energy absorbed by phycobilisomes was efficiently transferred to the PS II reaction centers in the absence of the PS I. No light state transition could be detected in the ΔpsaAB::cat strain; in the absence of PS I, cells remain in state 1. Development of this relatively light-tolerant strain lacking PS I provides an important new tool for the genetic manipulation of PS I and further demonstrates the utility of Synechococcus sp. PCC 7002 for structural and functional analyses of the PS I reaction center.

Function and organization of Photosystem I polypeptides

Photosystem I functions as a plastocyanin:ferredoxin oxidoreductase in the thylakoid membranes of chloroplasts and cyanobacteria. The PS I complex contains the photosynthetic pigments, the reaction center P700, and five electron transfer centers (A0, A1, FX, FA, and FB) that are bound to the PsaA, PsaB, and PsaC proteins. In addition, PS I complex contains at least eight other polypeptides that are accessory in their functions. Recent use of cyanobacterial molecular genetics has revealed functions of the accessory subunits of PS I. Site-directed mutagenesis is now being used to explore structure-function relations in PS I. The overall architecture of PSI complex has been revealed by X-ray crystallography, electron microscopy, and biochemical methods. The information obtained by different techniques can be used to propose a model for the organization of PS I. Spectroscopic and molecular genetic techniques have deciphered interaction of PS I proteins with the soluble electron transfer partners. This review focuses on the recent structural, biochemical and molecular genetic studies that decipher topology and functions of PS I proteins, and their interactions with soluble electron carriers.

PsaL subunit is required for the formation of photosystem I trimers in the cyanobacterium Synechocystis sp. PCC 6803

When membranes of the wild type strain of the cyanobacterium Synechocystis sp. PCC 6803 were solubilized with detergents and fractionated by sucrose-gradient ultracentrifugation, photosystem I could be obtained as trimers and monomers. We could not obtain trimers from the membranes of any mutant strain that lacked PsaL subunit. In contrast, absence of PsaE, PsaD, PsaF, or PsaJ did not completely abolish the ability of photosystem I to form trimers. Furthermore, PsaL is accessible to digestion by thermolysin in the monomers but not in the trimers of photosystem I purified from wild type membranes. Therefore, PsaL is necessary for trimerization of photosystem I and may constitute the trimer-forming domain in the structure of photosystem I.