Differential scanning calorimetric study of the complexes of modified myosin subfragment 1 with ADP and vanadate or beryllium fluoride

Intermolecular Interactions of Myosin Subfragment 1 Induced by the N-Terminal Extension of Essential Light Chain 1

We applied dynamic light scattering (DLS) to compare aggregation properties of two isoforms of myosin subfragment 1 (S1) containing different "essential" (or "alkali") light chains, A1 or A2, which differ by the presence of an N-terminal extension in A1. Upon mild heating (up to 40°C), which was not accompanied by thermal denaturation of the protein, we observed a significant growth in the hydrodynamic radius of the particles for S1(A1), from ~18 to ~600-700 nm, whereas the radius of S1(A2) remained unchanged and equal to ~18 nm. Similar difference between S1(A1) and S1(A2) was observed in the presence of ADP. In contrast, no differences were observed by DLS between these two S1 isoforms in their complexes S1-ADP-BeF_x and S1-ADP-AlF₄^- which mimic the S1 ATPase intermediate states S1*-ATP and S1**-ADP-P_i. We propose that during the ATPase cycle the A1 N-terminal extension can interact with the motor domain of the same S1 molecule, and this can explain why S1(A1) and S1(A2) in S1-ADP-BeF_x and S1-ADP-AlF₄^- complexes do not differ in their aggregation properties. In the absence of nucleotides (or in the presence of ADP), the A1 N-terminal extension can interact with actin, thus forming an additional actin-binding site on the myosin head. However, in the absence of actin, this extension seems to be unable to undergo intramolecular interaction, but it probably can interact with the motor domain of another S1 molecule. These intermolecular interactions of the A1 N-terminus can explain unusual aggregation properties of S1(A1).

Does Interaction between the Motor and Regulatory Domains of the Myosin Head Occur during ATPase Cycle? Evidence from Thermal Unfolding Studies on Myosin Subfragment 1

Myosin head (myosin subfragment 1, S1) consists of two major structural domains, the motor (or catalytic) domain and the regulatory domain. Functioning of the myosin head as a molecular motor is believed to involve a rotation of the regulatory domain (lever arm) relative to the motor domain during the ATPase cycle. According to predictions, this rotation can be accompanied by an interaction between the motor domain and the C-terminus of the essential light chain (ELC) associated with the regulatory domain. To check this assumption, we applied differential scanning calorimetry (DSC) combined with temperature dependences of fluorescence to study changes in thermal unfolding and the domain structure of S1, which occur upon formation of the ternary complexes S1-ADP-AlF4- and S1-ADP-BeFx that mimic S1 ATPase intermediate states S1**-ADP-Pi and S1*-ATP, respectively. To identify the thermal transitions on the DSC profiles (i.e. to assign them to the structural domains of S1), we compared the DSC data with temperature-induced changes in fluorescence of either tryptophan residues, located only in the motor domain, or recombinant ELC mutants (light chain 1 isoform), which were first fluorescently labeled at different positions in their C-terminal half and then introduced into the S1 regulatory domain. We show that formation of the ternary complexes S1-ADP-AlF4- and S1-ADP-BeFx significantly stabilizes not only the motor domain, but also the regulatory domain of the S1 molecule implying interdomain interaction via ELC. This is consistent with the previously proposed concepts and also adds some new interesting details to the molecular mechanism of the myosin ATPase cycle.

The effect of jasplakinolide on the thermodynamic properties of ADP.BeF(x) bound actin filaments

The effect of BeF(x) and a natural toxin (jasplakinolide) was examined on the thermal stability of actin filaments by using differential scanning calorimetry. The phosphate analogue beryllium fluoride shifted the melting temperature of actin filaments (67.4 degrees C) to 83.7 degrees C indicating that the filaments were thermodynamically more stable in their complex with ADP.BeF(x). A similar tendency was observed when the jasplakinolide was used in the absence of BeF(x). When both the ADP.BeF(x) and the jasplakinolide bound to the actin filaments their collective effect was similar to that observed with ADP.BeF(x) or jasplakinolide alone. These results suggested that ADP.BeF(x) and jasplakinolide probably stabilize the actin filaments by similar molecular mechanisms.

Nucleotide-induced and actin-induced structural changes in SH1-SH2-modified myosin subfragment 1

We compared the structural properties of myosin subfragment 1 (S1) modified at both reactive SH-groups, SH1 (Cys707) and SH2 (Cys697), with the properties of unmodified S1 and SH1-modified S1. It is shown using differential scanning calorimetry (DSC) that SH1 modification has no noticeable influence on the changes in S1 thermal unfolding induced by the formation of S1 ternary complexes with ADP and P(i) analogs (V(i), AlF(4)(-), and BeF(x)). These changes, however, normally expressed in a significant increase of S1 thermal stability, are almost fully prevented by modification of both SH1 and SH2. In contrast, SH2 modification had no effect on the changes induced by the formation of the ternary complexes S1-ADP-V(i), S1-ADP-AlF(4)(-), and S1-ADP-BeF(x) in EPR spectra of S1 spin-labeled at SH1 group. Interaction of S1 with F-actin substantially increased the thermal stability of S1; a similar effect was observed by DSC with both SH1- and SH1-SH2-modified S1. Overall, our results demonstrate that modification of both reactive SH-groups on S1 has no influence on the actin-induced changes of S1 and on the local nucleotide-induced conformational changes in the SH1 group region, but strongly prevents the global nucleotide-induced structural changes in the entire S1 molecule. The results suggest that modification of SH1 and SH2 impairs the spread of nucleotide-induced conformational changes from the ATPase site throughout the structure of the entire S1 molecule, thus disturbing a coupling between the motor and regulatory domains in the myosin head.

Actomyosin systems of biological motility

Evolution of notions on the molecular mechanism of muscle contraction and other events based on the actin-myosin interaction, from the middle of XX century to the present time, is briefly reviewed, including recent views on the functioning of the myosin head as a "molecular motor". The results of structural and functional studies on the myosin head performed by the author and his colleagues using differential scanning calorimetry are also reviewed.

Differential scanning calorimetric study of myosin subfragment 1 with tryptic cleavage at the N-terminal region of the heavy chain

The thermal unfolding of myosin subfragment 1 (S1) cleaved by trypsin was studied by differential scanning calorimetry. In the absence of nucleotides, trypsin splits the S1 heavy chain into three fragments (25, 50, and 20 kDa). This cleavage has no appreciable influence on the thermal unfolding of S1 examined in the presence of ADP, in the ternary complexes of S1 with ADP and phosphate analogs, such as orthovanadate (Vi) or beryllium fluoride (BeFx), and in the presence of F-actin. In the presence of ATP and in the complexes S1.ADP.Vi or S1.ADP.BeFx, trypsin produces two additional cleavages in the S1 heavy chain: a faster cleavage in the N-terminal region between Arg23 and Ile24, and a slower cleavage at the 50 kDa fragment. It has been shown that the N-terminal cleavage strongly decreases the thermal stability of S1 by shifting the maximum of its thermal transition by about 7 degrees C to a lower temperature, from 50 degrees C to 42.4 degrees C, whereas the cleavage at both these sites causes dramatic destabilization of the S1 molecule leading to total loss of its thermal transition. Our results show that S1 with ATP-induced N-terminal cleavage is able, like uncleaved S1, to undergo global structural changes in forming the stable ternary complexes with ADP and Pi analogs (Vi, BeFx). These changes are reflected in a pronounced increase of S1 thermal stability. However, S1 cleaved by trypsin in the N-terminal region is unable, unlike S1, to undergo structural changes induced by interaction with F-actin that are expressed in a 4-5 degrees C shift of the S1 thermal transition to higher temperature. Thus, the cleavage between Arg23 and Ile24 does not significantly affect nucleotide-induced structural changes in the S1, but it prevents structural changes that occur when S1 is bound to F-actin. The results suggest that the N-terminal region of the S1 heavy chain plays an important role in structural stabilization of the entire motor domain of the myosin head, and a long-distance communication pathway may exist between this region and the actin-binding sites.

Nucleotide binding induces global and local structural changes of myosin head in muscle fibres

Thermal stability and internal dynamics of myosin heads in fiber bundles from rabbit psoas muscle has been studied by electron paramagnetic resonance (EPR) spectroscopy and differential scanning calorimetry (DSC). Using ADP, ATP and orthovanadate (V(i)), three intermediate states of the ATP hydrolysis cycle were simulated in glycerinated muscle fibers. DSC transitions contained three overlapping endotherms in each state. Deconvolution showed that the transition temperature of 58.4 degrees C was almost independent of the intermediate state of myosin, while nucleotide binding shifted the melting temperatures of 54.0 and 62.3 degrees C, and changed the enthalpies. These changes suggest global rearrangements of the internal structure in myosin head. In the presence of ADP and ADP plus V(i), the conventional EPR spectra showed changes in the ordering of the probe molecules, suggesting local conformational and motional changes in the internal structure of myosin heads. Saturation transfer EPR measurements reported increased rotational mobility of spin labels in the presence of ATP plus orthovanadate corresponding to a weakly binding state of myosin to actin.

Is SH1-SH2-cross-linked myosin subfragment 1 a structural analog of the weakly-bound state of myosin?

Myosin subfragment 1 (S1) with SH1 (Cys(707)) and SH2 (Cys(697)) groups cross-linked by p-phenylenedimaleimide (pPDM-S1) is thought to be an analog of the weakly bound states of myosin bound to actin. The structural properties of pPDM-S1 were compared in this study to those of S1.ADP.BeF(x) and S1.ADP.AlF(4)(-), i.e., the established structural analogs of the myosin weakly bound states. To distinguish between the conformational effects of SH1-SH2 cross-linking and those due to their monofunctional modification, we used S1 with the SH1 and SH2 groups labeled with N-phenylmaleimide (NPM-S1) as a control in our experiments. The state of the nucleotide pocket was probed using a hydrophobic fluorescent dye, 3-[4-(3-phenyl-2-pyrazolin-1-yl)benzene-1-sulfonylamido]phen ylboronic acid (PPBA). Differential scanning calorimetry (DSC) was used to study the thermal stability of S1. By both methods the conformational state of pPDM-S1 was different from that of unmodified S1 in the S1.ADP.BeF(x) and S1.ADP.AlF(4)(-) complexes and closer to that of nucleotide-free S1. Moreover, BeF(x) and AlF(4)(-) binding failed to induce conformational changes in pPDM-S1 similar to those observed in unmodified S1. Surprisingly, when pPDM cross-linking was performed on S1.ADP.BeF(x) complex, ADP.BeF(x) protected to some extent the nucleotide pocket of S1 from the effects of pPDM modification. NPM-S1 behaved similarly to pPDM-S1 in our experiments. Overall, this work presents new evidence that the conformational state of pPDM-S1 is different from that of the weakly bound state analogs, S1.ADP.BeF(x) and S1.ADP.AlF(4)(-). The similar structural effects of pPDM cross-linking of SH1 and SH2 groups and their monofunctional labeling with NPM are ascribed to the inhibitory effects of these modifications on the flexibility/mobility of the SH1-SH2 helix.

Effects of SH1 and SH2 modifications on myosin: similarities and differences

The properties of myosin modified at the SH2 group (Cys-697) were studied and compared with the previously reported properties of myosin modified at the SH1 group (Cys-707). 4-[N-[(iodoacetoxy)ethyl]-N methylamino]-7-nitrobenz-2-oxa-1, 3-diazole (IANBD) was used for selective modification of the SH2 group on myosin. SH2-labeled heavy meromyosin (SH2-HMM), similar to SH1-labeled HMM (SH1-HMM), did not propel actin filaments in the in vitro motility assays. SH1- and SH2-HMM produced similar amounts of load in the mixtures with unmodified HMM; the sliding speed of actin filaments gradually decreased with an increase in the fraction of either one of the modified HMMs in the mixture. In analogy to SH1-labeled myosin subfragment 1 (SH1-S1), SH2-labeled S1 (SH2-S1) activated regulated actin in the in vitro motility assays. SH2 modification inhibited Mg-ATPase of S1 and its activation by actin. The weak binding of S1 to actin was unaffected whereas the strong binding was weakened by SH2 modification. Overall, our results demonstrate similar behavior of SH1- and SH2-modified myosin heads in the in vitro motility assays despite some differences in their enzymatic properties. The effects of these modifications are ascribed to the location of the SH1-SH2 helix relative to other functional centers of S1.