Bioaccumulation and biosorption of Co2+ by Neurospora crassa

Optimization of copper, lead and cadmium biosorption onto newly isolated bacterium using a Box-Behnken design

Due to the progressive development of industrial and technological activities, heavy metal contamination is increasing each year and it poses a serious health and environmental risk. Microorganisms are capable of removing heavy metals from a contaminated environment. In this work, 51 microbial strains were isolated from heavy metal contaminated water and soil. The JAW1 strain, identified as Pseudomonas azotoformans, was selected and applied in bioremediation of the specific mixture of metals (Cd, Cu, and Pb) in an aqueous medium. The Box-Behnken design was used to optimize the biosorption process, with three factors: pH, initial metal concentration, concentration of the biosorbent. For the strain P. azotoformans JAW1, the optimal conditions were pH = 6.0, 25mg/L of each metal and 2g/L, following removal levels were achieved: Cd 44,67%; Cu 63,32%; Pb 78,23%. The possible interactions of cell-metal ions were evaluated using FT-IR analysis. The study indicated the presence of groups, which may be responsible for bonding of metal ions. The studies conducted on bioremediation mechanisms indicated that metal accumulation could occur on the cell surface (biosorption) where the amount of adsorbed metals reached: Cd 98,57%, Cu 69,76%, Pb 88,58%. P. azotoformans JAW1 exhibited a potential for application in the bioremediation of mining wastewater with complex metal contaminations.

Exophiala sideris, a novel black yeast isolated from environments polluted with toxic alkyl benzenes and arsenic

A novel species of the black yeast genus Exophiala (order Chaetothyriales) is described. Strains were repeatedly obtained by enriching samples of wild berries from different plants, guano-rich soil and from oak railway ties treated with arsenic creosote under a toluene-rich atmosphere. An identical strain was encountered in a closed arsenic mine polluted by alkyl benzenes. Its potential use for purposes of bioremediation is discussed.

Bioremediation of trace cobalt from simulated spent decontamination solutions of nuclear power reactors using E. coli expressing NiCoT genes

Removal of radioactive cobalt at trace levels (approximately nM) in the presence of large excess (10(6)-fold) of corrosion product ions of complexed Fe, Cr, and Ni in spent chemical decontamination formulations (simulated effluent) of nuclear reactors is currently done by using synthetic organic ion exchangers. A large volume of solid waste is generated due to the nonspecific nature of ion sorption. Our earlier work using various fungi and bacteria, with the aim of nuclear waste volume reduction, realized up to 30% of Co removal with specific capacities calculated up to 1 microg/g in 6-24 h. In the present study using engineered Escherichia coli expressing NiCoT genes from Rhodopseudomonas palustris CGA009 (RP) and Novosphingobium aromaticivorans F-199 (NA), we report a significant increase in the specific capacity for Co removal (12 microg/g) in 1-h exposure to simulated effluent. About 85% of Co removal was achieved in a two-cycle treatment with the cloned bacteria. Expression of NiCoT genes in the E. coli knockout mutant of NiCoT efflux gene (rcnA) was more efficient as compared to expression in wild-type E. coli MC4100, JM109 and BL21 (DE3) hosts. The viability of the E. coli strains in the formulation as well as at different doses of gamma rays exposure and the effect of gamma dose on their cobalt removal capacity are determined. The potential application scheme of the above process of bioremediation of cobalt from nuclear power reactor chemical decontamination effluents is discussed.

Cell-wall-bound metal ions are not taken up in Neurospora crassa

To establish the relevance of the cell wall in metal ion transport, cobalt uptake was examined in Neurospora crassa. Cobalt taken up was largely surface bound (>90%), resulting in a release of calcium and magnesium. Surface-bound cobalt could not enter intracellular locations upon further incubation of mycelia in a metal-free medium. Saturation of the surface with one metal augured subsequent dose-dependent entry of a different metal into intracellular locations. In comparison with the cobalt-resistant mutant, the cobalt-sensitive strain of N. crassa bound less cobalt on the surface but with significant intracellular accumulation. Our results demonstrate the importance of the cell wall in metal transport, toxicity, and resistance in fungi.

Metal bioremediation through growing cells

Heavy-metal pollution represents an important environmental problem due to the toxic effects of metals, and their accumulation throughout the food chain leads to serious ecological and health problems. Metal remediation through common physico-chemical techniques is expensive and unsuitable in case of voluminous effluents containing complexing organic matter and low metal contamination. Biotechnological approaches that are designed to cover such niches have, therefore, received great deal of attention in the recent years. Biosorption studies involving low-cost and often dead/pretreated biomass have dominated the literature and, subsequently, extensive reviews focusing on equilibrium and kinetics of metal biosorption have also come up. However, the low binding capacity of biomass for certain recalcitrant metals such as Ni and failure to effectively remove metals from real industrial effluents due to presence of organic or inorganic ligands limit this approach. At times, when pure biosorptive metal removal is not feasible, application of a judicious consortium of growing metal-resistant cells can ensure better removal through a combination of bioprecipitation, biosorption and continuous metabolic uptake of metals after physical adsorption. Such approach may lead to simultaneous removal of toxic metals, organic loads and other inorganic impurities, as well as allow optimization through development of resistant species. However, sensitivity of living cells to extremes of pH or high metal concentration and need to furnish metabolic energy are some of the major constraints of employing growing cells for bioremediation. The efforts to meet such challenges via isolation of metal-resistant bacterial/fungal strains and exploitation of organic wastes as carbon substrates have began. Recent studies show that the strains (bacteria, yeast and fungi) isolated from contaminated sites possess excellent capability of metal scavenging. Some bacterial strains possess high tolerance to various metals and may be potential candidates for their simultaneous removal from wastes. Evidently, the stage has already been set for the application of metal-resistant growing microbial cells for metal harvesting. This review focuses on the applicability of growing bacterial/fungal/algal cells for metal removal and the efforts directed towards cell/process development to make this option technically/economically viable for the comprehensive treatment of metal-rich effluents.

Comparative study of the biosorption of Pb(II), Ni(II) and Cr(VI) ions onto S. cerevisiae: determination of biosorption heats

In this study, the biosorption of Pb(II), Ni(II) and Cr(VI) ions onto inactive Saccharomyces cerevisiae was investigated as a function of initial pH, initial metal ion concentration and temperature. The Langmuir model was applied to experimental equilibrium data of Pb(II), Ni(II) and Cr(VI) biosorption depending on temperature and the maximum metal ions uptake at optimum biosorption temperature of 25 degrees C, were found to be 270.3, 46.3 and 32.6 mgg(-1), respectively. Using the Langmuir constant, b values obtained at different temperatures, the biosorption heats of Pb(II), Ni(II) and Cr(VI) were determined as -1.125, -1.912 and -2.89 kcalmol(-1), respectively. The results indicated that the biosorption of Pb(II), Ni(II) and Cr(VI) ions to S. cerevisiae is by the physical adsorption and has an exothermic nature.

Removal of cadmium and manganese by a non-toxic strain of the freshwater cyanobacterium Gloeothece magna

The ability of both living and dry cells of Gloeothece magna, a non-toxic freshwater cyanobacterium, to adsorb cadmium and manganese is demonstrated in this study. Chlorophyll a content of living cells was not influenced by either cadmium or manganese concentrations, indicating that adsorption of both Cd2+ and Mn2+ by living cells of G. magna, was independent of the metabolic state of the organism. Moreover, the adsorption of both Cd2+ and Mn2+ to living cells and dry cells, was dependent on the metal concentrations, and fitted the Freundlich adsorption isotherm. However, dry cells had larger binding capacity for both Cd2+ (Kf = 912.6) and Mn2+ (Kf = 2,398) than living cells (Kf = 151.4 & 63, respectively). The role of the capsular polysaccharides, the main constituents of the cyanobacterial envelope, in binding these two metals was also studied. Polysaccharide extracts of this organism adsorbed high amounts of both Cd2+ (I15-425 microgmg(-1)) and Mn2+ (473-906 microgmg(-1)). This study suggests that G. magna would probably be cultured in water bodies contaminated by heavy metals to ameliorate their toxicity. Also dry material of this cyanobacterium being a non-toxic species, could be used as a safe biofilter to remove toxic metals from drinking water.