Isolation of the mini insertions IS6 and IS7 of E. coli

A selection cartridge for rapid detection and analysis of spontaneous mutations including insertions of transposable elements in Enterobacteriaceae

We present a method that allows positive selection and rapid analysis of mutations in Enterobacteriaceae. Mutations are detected in a 2630 bp selection cartridge inserted in two different bacterial multicopy plasmid vectors. Spontaneous mutations in Escherichia coli, Enterobacter cloacae and Citrobacter freundii include insertions, deletions and point mutations. The small size of the target sequence facilitates rapid analysis of DNA rearrangements by cleavage with restriction enzymes and of any type of mutation by DNA sequence analysis. While in E. coli insertions of the mobile elements IS1, IS2 and IS5 were readily found, insertions of putative new transposable elements were detected in Enterobacter cloacae. The selection cartridge can thus serve as a tool for studying the spectrum of insertion mutations in Enterobacteriaceae and probably other Gram-negative bacteria, and the dependency of this spectrum on physiological and environmental factors and the host's genetic background can be investigated.

Second-element turn-on of gene expression in an IS1 insertion mutant

To learn more about the ways in which genes silenced by insertion mutations can be reactivated, we have undertaken a systematic investigation of Gal+ revertants of the polar mutant galOP-306::IS1 in Escherichia coli K12. The selective conditions used excluded reversion to wild type by precise excision of IS1. In this system (which resided on a multi-copy plasmid) reversion to the Gal+ phenotype occurred with a frequency of about 10(-7) per cell and per generation. Analysis of the revertants revealed that - with the single exception of the previously published chromosomal mutant sis1 - alterations in the structure of IS1 lead to reactivation of gal operon expression. These events fall into four classes: (I) insertion of IS2 at position 327 in IS1, insertion of IS2 at position 687 in IS1, (III) insertion of a hitherto undetected mobile element, IS150, at position 387, (IV) a 16-bp deletion encompassing IS1 coordinates 553-568. Of some 200 independent reversion events studied, all but one were of types I-III i.e. they involved the intervention of a second mobile element.

A cloned DNA fragment from bacteriophage P1 enhances IS2 insertion

A 1.75 kb DNA segment of the bacteriophage P1 genome is known to serve as a preferred target for IS2 insertions. The presence of this fragment in a plasmid expressing the galK gene dramatically increases the proportion of IS2 insertions among spontaneous galK- mutants. Subfragments from two different parts of the 1.75 kb segment independently stimulate IS2 insertion, while another subfragment does not. In the plasmids studied IS2 elements not only insert into the cloned P1 fragment but also into parts of the galK gene with similar probability and mostly in one orientation. Many insertion sites are unique but several specific sites within the preferred target are repeatedly used for IS2 integration. The experimental data are compatible with a proposed cooperative mechanism, according to which more than one attracting sequence on the same plasmid might significantly enhance the probability of a particular target region to attract IS2.

Terminal inverted repeats of prokaryotic transposable element IS186 which can generate duplications of variable length at an identical target sequence

The insertion element IS186, which resides in the chromosome of Escherichia coli K-12, is 1338 bp long. Its termini represent 23-bp perfectly inverted repeats, but a variant carries a mismatch at position 23. IS186 transposes preferentially into G + C-rich sequences and generates target duplications of variable length, even at the same integration site.

A control system which causes alternating turn-off/turn-on of transcription on insertion element IS1

Presence of insertion element IS1 within an operon leads to absence of expression of genes distal to its integration site. This strong polar effect is observed irrespective of the orientation of IS1. Here I report on a mutant of E. coli K12 which allows turn-on of genes located distally to IS1. This turn-on is due to activation of transcription starting within IS1. The activation of transcription is under the control of a regulatory locus (sis1) which acts in trans. The regulatory locus itself changes its state, which leads to an alternating turn-off/turn-on of genes located distal to IS1: The rate of turn-off was observed with a frequency of about 0.3% (per cell and per generation), that of turn-on with a frequency of about 0.015% (per cell and per generation).

Specific in vitro transcription of the insertion sequence IS2

The insertion sequence IS2 is a small transposable element of Escherichia coli that lacks any known genetic markers. Insertion of this element in one orientation (I) within bacterial operons blocks expression of downstream genes. In the other orientation (II), IS2 has been associated with the constitutive expression of genes distal to its insertion, suggesting that IS2 might contain promoters directing transcription of IS2(II) into other genes. To test the transcription potential of IS2, we have transcribed in vitro DNA templates from gal3, a Gal- allele in which an IS2(I) is inserted between the gal promoter and the gal genes. We have detected two IS2-specific RNAs which initiate from promoters within IS2 and are transcribed in orientation II (away from the galETK genes). Though the presence and orientation of these promoters suggests that they could be responsible for the constitutive expression of genes adjacent to an IS2(II) element, an alternative role could be for transcription of IS2-encoded genes. Although IS2(I) insertions normally block expression of adjacent genes, certain altered (e.g. mutant) IS2(I) sequences lead to the constitutive expression of downstream genes. We have transcribed DNA templates from galwc5 and galc331, which are Galc alleles that contain altered IS2(I) insertions within the gal operon. For each allele, we have detected two gal-directed transcripts initiating within the IS2 sequence. These RNAs are not detected upon transcription of the unaltered IS2(I) DNA and the promoters arise as a direct consequence of the IS2(I) alterations. This result suggests that these promoters detected in vitro are responsible for the Galc phenotype of these alleles.

A new type of IS1-mediated deletion

Genetical tests and DNA sequence analysis revealed that the mechanism of formation of IS1-induced type I and type II deletions differs. IS1-mediated type II deletions occur at the termini of the integrated element and do not remove the element. This process is independent of the cellular recA system and does not involve DNA sequence homology. Conversely, the formation of IS1-induced type I deletions differs substantially. They require recA gene product, small DNA sequence duplications and a topological arrangement of the DNA molecule to allow alignment of duplications.

Deletions and an inversion induced by a resident IS1 of the lactose transposon Tn951

DNA-DNA filter binding tests, "Southern" blotting experiments and DNA heteroduplex analysis clearly show that Tn951 contains an IS1 element. This IS1-951 sequence is peculiar in that it does not contain the PstI cleavage site which is usually observed on E. coli derived IS1 elements. Nonetheless, IS1-951 induces deletions. This process is temperature dependent. One instance of an IS1-951 induced inversion was observed, the structure of which is compatible with the current models of transposition of IS elements.

Integration of IS3 into IS2 generates a short sequence duplication

The Gal+ allele IS2-43 is known to segregate Gal- clones. Among 11 Gal- segregants, one was shown to be due to the integration of IS3 into IS2-43. Precise excision of the integrated IS3 element occurred at a rate of 5 x 10(-9)/cell/generation. DNA sequence analysis revealed that the termini of the IS3 element have the relation of imperfect inverted repeats and it is now flanked by a 3bp or 4bp duplication, a size which has not been seen before with other elements.

IS2-61 and IS2-611 arise by illegitimate recombination from IS2-6

A more stable derivative of IS2-6 has been isolated, which had lost 54 bp of the 108 bp long insert characteristic of IS2-6. This new allele of IS2, IS2-61, segregates the remaining 54 bp to yield allele IS2-611. DNA sequence analysis shows that the segregation products of IS2-6 arise by recA-independent, illegitimate recombination at 9 bp long direct sequence repetitions.

IS2-43 and IS2-44: new alleles of the insertion sequence IS2 which have promoter activity

The sequence of two new IS2 alleles with promoter activity (IS2-43 and IS2-44) is reported. The alleles are identical and are formed by a 17 bp tandem duplication in an AT-rich region of IS2. This created a new RNA polymerase binding site. A mutation was found that increased the frequency of formation of these 17 bp duplications but not of another class of duplications, the "mini-insertions". This suggested that the mechanisms of formation of the two classes of duplications are different.

Development of a system useful for studying the formation of unstable alleles of IS2

IS2-induced deletions of the gal control region were isolated in a plasmid carrying gal OP-308::IS2-7. This contains a 54 basepair long, unstable mini insertion within IS2, thus allowing constitutive expression of the gal structural genes. Deletion PPI is 11.9 kilobasepairs (kb) long and is Gal+ because it has retained the mini insertion. In PP4 7.2 kb DNA material including markers gal OP, chlD and pgl are deleted. PP4 has lost the mini insertion and is therefore Gal negative. DNA sequencing of the newly formed junction in PP4 reveals that the deletion terminates precisely at nucleotide 1 of IS2 and that no DNA sequence homology is involved in this IS2-mediated deletion formation. PPI segregates Gal- clones due to the loss of the mini insertion. One such segregant PPIS and PP4 both give only constitutive Gal+ revertants, which consist of the previously known mini insertions and also a new class of "supermini" inserts within IS2 of about 10 to 20 basepairs long. Therefore, PPIS and PP4 can be used to study various parameters involved in the formation of mini insertions.

Multiple integration sites for the lactose transposon Tn 951 on plasmid RP 1 and establishment of a coordinate system for Tn 951

Various molecules generated by transposition of the lactose transposon Tn 951 from plasmid pGC1 to plasmid RP1 were examined by DNA heteroduplex and restriction endonuclease analysis. Tn 951 was found to transpose to at least eight different sites on RP 1 in both possible orientations. A coordinate system for the lactose transposon Tn 951 is constructed.

DNA sequence of the mini-insertion IS2--6 and its relation to the sequence of IS2

In polar IS2 abolishes galactose operon expression. Operon activity is restored by a 108 base pair mini-insertion within IS2 called IS2--6. The DNA sequences of the gal operon-IS2 junction, the parental IS2 region undergoing sequence rearrangements and IS2--6 itself are reported. IS2--6 is composed of sequence intervals present in both strands of IS2.