Lambda transducing phages derived from a FinO- R100::lambda cointegrate plasmid: proteins encoded by the R100 replication/incompatibility region and the antibiotic resistance determinant

Plasmid vectors for selecting IS1-promoted deletions in cloned DNA: sequence analysis of the omega interposon

We have constructed two plasmid vectors which allow selection for in vivo deletions within cloned DNA fragments. The plasmids are derivatives of pBR322 which carry the Escherichia coli rpsL (strA) gene, known to confer a dominant streptomycin (Sm)-sensitivity phenotype to the host cell, and a copy of the IS1 transposable element. Sm-resistant strains that harbor these plasmids display sensitivity to Sm. Spontaneous IS1-promoted deletions across the rpsL gene can be isolated simply by selection for Sm resistance. Hence, nested sets of deletions of a cloned DNA can be obtained and sequenced with an IS1-specific primer. Using this approach, we have determined the complete nucleotide sequence of the omega interposon [Prentki and Krisch, Gene 29 (1984) 303-313].

Cloning and expression in Escherichia coli of mercuric ion resistance coding genes from Zymomonas mobilis

From a genomic library of Zymomonas mobilis prepared in Escherichia coli, two clones (carrying pZH4 and pZH5) resistant to the mercuric ion were isolated. On partial restriction analysis these two clones appeared to have the same 2.9 kb insert. Mercuric reductase activity was assayed from the Escherichia coli clone carrying pZH5 and it was Hg(2+)-inducible, NADH dependent and also required 2-mercaptoethanol for its activity. The plasmid pZH5 encoded three polypeptides, mercuric reductase (merA; 65 kDa), a transport protein (merT 18-17 kDa) and merC (15 kDa) as analysed by SDS-PAGE. Southern blot analysis showed the positive signal for the total DNA prepared from Hgr Z. mobilis but not with the Hgs strain which was cured for a plasmid (30 kb). These results were also confirmed by isolating this plasmid from Hgr Z. mobilis and transforming into E. coli. Moreover the plasmid pZH5 also hybridized with the mer probes derived from Tn21.

Fertility inhibition gene of plasmid R100

The fin0 gene of R100 was isolated from the Fin0+ transducing phage VA lambda 57. The limits of the gene were determined by BAL31 digestions and by analysis of deletion mutations derived from an internal restriction site. The DNA sequence contained an open reading frame of 558 nucleotides that would encode a protein of 21,268 daltons. Synthesis of such a protein was observed only when the fragment was cloned in front of the TAC promoter. Deletions entering the large open reading frame from either end were Fin0-, while internal frame shift mutations retained high Fin0 activity. One such strain had a 13 bp internal deletion that would produce a protein of 63 amino acid residues of which 21 were basic. We were consequently unable to rigorously establish that the 558 base orf encoded a fin0 product. The strand opposite the large open reading frame contained several transcription termination signals, and it is possible that the active gene product is one or two small RNAs from this strand.

Characterization of the gene products produced in minicells by pSM1, a derivative of R100

At least ten polypeptides larger than 6 kilodaltons (K) are produced in minicells from the miniplasmid pSM1 in vivo. pSM1 (5804 bp) is a small derivative of the drug resistance plasmid R100 (ca. 90 kb) and carries the R100 essential replication region as well as some non-essential functions. Cloned restriction fragments of pSM1 and plasmids with deletions within pSM1 sequences were used to assign eight of the ten observed polypeptides to specific coding regions of pSM1. Two of these polypeptides were identified as RepA1 and RepA2, proteins encoded by the essential replication region of pSM1/R100. The nucleotide sequence consisting of 885 bp outside the essential replication region is presented here. This sequence contains an open reading frame, orf4, for a protein 22.9 K in size, and one of the pSM1-encoded polypeptides was identified as the orf4 gene product. Five additional polypeptides were shown to be the products of other open reading frames mapping outside the essential replication region. Specific functions have been assigned to four of these polypeptides and tentatively to the fifth.

Characterization of transferable plasmids from Shigella flexneri 2a that confer resistance to trimethoprim, streptomycin, and sulfonamides

A set of plasmids conferring resistance to several antibiotics, including the combination of trimethoprim and sulfamethoxazole, has been isolated from Escherichia coli following conjugative cotransfer from a clinical isolate of Shigella flexneri 2a. One of the plasmids, pCN1, was shown by subcloning and DNA sequencing to carry a gene encoding a trimethoprim-insensitive dihydrofolate reductase identical to that found in E. coli transposon 7. This plasmid was also shown to confer resistance to both streptomycin and spectinomycin by production of an adenylyltransferase that inactivated the drugs and the gene encoding this enzyme has also been sequenced. A second plasmid from the set, pCN2, was shown to inactivate streptomycin by a phosphotransferase mechanism and also to confer resistance to sulfonamides. The third plasmid from the set could not be correlated with a drug-resistance phenotype, but does appear to play a crucial role in plasmid mobilization.

Polypeptides specified by the mercuric resistance (mer) operon of plasmid R100

Overlapping deletion mutations were constructed in chimaeric plasmids carrying the mer operon of plasmid R100. Polypeptides specified by the mutant plasmids in Escherichia coli minicells correlated with the mer genes as follows: merT, 17- and 16-kDa polypeptides; merP, 9.8- and 9.5-kDa polypeptides; merC, a 14-kDa polypeptide; merA, 65- and 62-kDa polypeptides. The products of the merR and merD genes were not identified. The revised nomenclature of the mer genes is explained.

Nucleotide sequence analysis of a gene encoding a streptomycin/spectinomycin adenylyltransferase

The nucleotide sequence of 1400 bp from R-plasmid R538-1 containing the streptomycin/spectinomycin adenyltransferase gene (aadA) was determined, and the location of the aadA gene was identified by a combination of insertion and deletion mutants. Its gene product, aminoglycoside 3"-adenylyltransferase (AAD(3")(9), has a Mr of 31,600.

The finO gene of antibiotic resistance plasmid R100

Lambda phages carrying the R100 finO gene have been isolated from an R100:: lambda cointegrate in which lambda was inserted into the R100 traD gene at kb coordinate 72.1. Physical analyses of these phages place the finO gene within R100 SalI fragment D, near kb coordinate 82.0. Analysis of proteins synthesized by the phages did not identify the finO gene product, although a constitutive protein of m.w. 30,100 was encoded by R100 DNA between kb coordinates 78.7 and 81.2.

Chloramphenicol acetyltransferase: enzymology and molecular biology

Naturally occurring chloramphenicol resistance in bacteria is normally due to the presence of the antibiotic inactivating enzyme chloramphenicol acetyltransferase (CAT) which catalyzes the acetyl-S-CoA-dependent acetylation of chloramphenicol at the 3-hydroxyl group. The product 3-acetoxy chloramphenicol does not bind to bacterial ribosomes and is not an inhibitor of peptidyltransferase. The synthesis of CAT is constitutive in E. coli and other Gram-negative bacteria which harbor plasmids bearing the structural gene for the enzyme, whereas Gram-positive bacteria such as staphylococci and streptococci synthesize CAT only in the presence of chloramphenicol and related compounds, especially those with the same stereochemistry of the parent compound and which lack antibiotic activity and a site of acetylation (3-deoxychloramphenicol). Studies of the primary structures of CAT variants suggest a marked degree of heterogeneity but conservation of amino acid sequence at and near the putative active site. All CAT variants are tetramers composed in each case of identical polypeptide subunits consisting of approximately 220 amino acids. The catalytic mechanism does not appear to involve an acyl-enzyme intermediate although one or more cysteine residues are protected from thiol reeagents by substrates. A highly reactive histidine residue has been implicated in the catalytic mechanism.

Mapping of RNA polymerase binding sites in R12 derived plasmids carrying the replication-incompatibility region and the insertion element IS1

Interactions between Escherichia coli RNA polymerase holoenzyme and three small plasmid DNAs (pSM1, pSM2, and pSM15) derived from the drug resistant factor R12 have been studied. These plasmids carry the copy number and incompatibility determinants, the origin of DNA replication and the rep gene(s) necessary for plasmid replication. They also contain the insertion element IS1 and the putative finO cistron. Thirteen DNA segments within the largest of the three plasmids (pSM2) were able to form either a binary and/or ternary complex with RNA polymerase. A unique strong binding site was mapped within the left end of IS1. Five binding sites were found within the rep-cop-inc region. Four of these are weak binding sites whereas the fifth does not form a stable binary complex and was detected by ternary complex formation. A strong binding site was located in the putative finO region whereas the remaining six binding sites are located in regions with unidentified genetic functions.

Cointegrate formation between homologous plasmids in Escherichia coli

Conjugation experiments were performed in which the donor was Escherichia coli K-12 strain KP245 containing either R plasmid NR1 plus an ampicillin-resistant derivative of ColE1 (*ColE1::Tn3, called RSF2124) or NR1 plus RSF2124 carrying a cloned EcoRI fragment of NR1. The recipient was the polA amber mutant JG112, in which RSF2124 cannot replicate. Ampicillin-resistant transconjugants can arise only when the genes for ampicillin resistance are linked to NR1 or are transposed to the host chromosome. When EcoRI fragment A of NR1 (20.5 kilobases) was cloned to RSF2124, the frequency of cotransfer of ampicillin resistance with tetracycline resistance was 25 to 60%. Plasmid DNA from these ampicillin-resistant transconjugant cells was analyzed by gel electrophoresis and was shown to be a cointegrate of NR1 and the RSF2124 derivative. Analysis of plasmid DNA isolated from donor cultures showed that the cointegrates were present before conjugation, which indicates that the mating does not stimulate cointegrate formation. When the cloned fragment was EcoRI fragment H of NR1 (4.8 kilobases), the frequency of cotransfer of ampicillin resistance with tetracycline resistance was about 4%, and the majority of the ampicillin-resistant transconjugants were found to contain cointegrate plasmids. When the donor contained NR1 and RSF2124, the frequency of cotransfer of ampicillin resistance was less than 0.1%, and analysis of plasmid DNA from the ampicillin-resistant transconjugants showed that Tn3 had been transposed onto NR1. These data suggest that plasmids which share homology may exist in cointegrate form to a high degree within a host cell.

Biochemical characterization of HgCl2-inducible polypeptides encoded by the mer operon of plasmid R100

Minicells carrying the subcloned mer operon from plasmid R100 were pulse-labeled with [35S]methionine, and the labeled polypeptides were analyzed at various subsequent times by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The Hg(II) reductase monomer encoded by plasmid R100 occurred as two proteins of 69 and 66 kilodaltons (kd). The minor 66-kd protein is a modified form of the 69-kd protein. This modification occurs in vivo. Both of these mer proteins are found in the soluble fraction of the cell; however, the 66-kd protein appears to have a slight affinity for the cellular envelope. Both the 69- and 66-kd mer proteins have pI values greater (pI = 5.8) than that reported (pI = 5.3) for the analogous monomer encoded by plasmid R831. The 15.1- and 14-kd mer proteins are localized in the inner membrane and are probably elements of the mer-determined Hg(II) uptake system. These two mer membrane proteins, which are antigenically unrelated to the Hg(II) reductase monomer, are quite basic (pI values greater than 7.8). The 12-kd mer protein is also a basic polypeptide that is present in the soluble fraction of the cell. Unlike the two membrane-bound mer proteins, the 12-kd mer protein is processed from a 13-kd precursor.

DNA homology of the promoter-distal regions of the tra operons of sex factors F and R100 in Escherichia coli K-12

The promoter-distal regions of the tra operons of F and R100-1 were analyzed by heteroduplex analysis, and the regions of nonhomology were identified. A common EcoRI restriction site was shown to be present, and this has allowed the physical maps to be aligned.

Polypeptides encoded by the mer operon

HgCl2-induced polypeptides synthesized by Escherichia coli minicells containing recombinant or natural HgR plasmids were labeled with [35S]methionine and analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. All plasmids examined encoded two heavily labeled, HgCl2-inducible polypeptides of 69,000 and 12,000 daltons. Most plasmids also encoded two additional HgCl2-inducible proteins in the 14,000- to 17,000-dalton range. Antiserum prepared against a purified mercuric ion reductase reacts with the 69,000-dalton polypeptide and a minor 66,000-dalton protein seen in several different HgR minicells. Recombinant plasmids constructed from portions of mer DNA from the IncFII plasmid NR1 were also analyzed in the minicell system. Five HgCl2-inducible polypeptides (69,000, 66,000, 15,100, 14,000, and 12,000 daltons) were synthesized in minicells carrying pRR130, a recombinant derivative containing the EcoRI-H and EcoRI-I restriction fragments of NR1. The EcoRI-H fragment of NR1 encodes the three small mer proteins of 15,100, 14,000, and 12,000 daltons and the amino-terminal 40,000 daltons of the mercuric ion reductase monomer.

Construction and characterization of a novel two-plasmid system for accomplishing temperature-regulated, amplified expression of cloned adventitious genes in Escherichia coli

We describe a two-plasmid system that utilizes the lacZ gene promoter and temperature-responsive plasmid replicons to accomplish closely regulated high-level expression of heterologous genes in Escherichia coli. One of the plasmids fails to replicate at 42 degrees C and contains a gene encoding the lac repressor; the second plasmid, which undergoes multicopy "runaway" replication at elevated temperatures, contains an adventitious gene under control of the operator-promoter system of the lacZ gene. Concurrent derepression of lac promoter function and amplification of copy number of the lac-controlled gene occurs when the temperature is elevated. We have used a structural gene encoding chloramphenicol acetyltransferase to demonstrate that the gene product under control of the lacZ promoter represents a major fraction of the total protein synthesized at 43 degrees C, whereas only minimal quantities of this enzyme are made at 30 degrees C. The system described allows the controlled expression of gene products that may have detrimental effects on cell growth, and provides a simple method for identifying radioactivity-labeled protein products of cloned genes in bacterial whole-cell extracts. The system also offers an alternative to intragenic temperature-sensitive mutations for studying the function of various enzymatic or regulatory proteins.

Isolation and characterization of lambda phages carrying the basic replicon of the resistance plasmid R1

Specialized transducing lambda phages, lambda oriR1, harboring DNA from the resistance plasmid R1drd-19 and its copy mutant pKN103 were isolated. From measurements of CCC-DNA content it is concluded that upon infection the phages can establish themselves as self-replicating plasmids in recA hosts lysogenic for lambda. It is thought that this bypassing of lambda immunity is due to the presence of the R1 origin of replication. The plasmids are sensitive to the incompatibility expressed by plasmid R1. This has been shown mainly by transduction of lambda oriR1 into recipients containing R1 plasmids or plasmid pBR322 carrying the basic replicon. We were able to demonstrate that a copy mutant of plasmid R1 was insensitive to copA+, but sensitive to the concerted action of PstI fragments F1 and F2. This mutant was previously assumed to be of dominant type. Physical mapping of the lambda oriR1 derivatives verified that they carry the basic replicon of plasmid R1. The plasmids are not stably maintained, but are lost in a frequency of 1%-2% per cell generation, which is consistent with their lack of the R1par region.

The nucleotide sequence of the replication control region of the resistance plasmid R1drd-19

The region of plasmid R 1 containing the replication control genes has been sequenced using the Maxam-Gilbert method. The nucleotide sequence of two small PstI restriction fragments (a total of about 1,000 base pairs) was determined for the wild-type R 1 plasmid as well as for two different copy mutants. It was found that one copy mutant has a single base substitution in the fragment which was recently shown to harbor an important inc/cop gene (Molin and Nordström 1980). Furthermore, the sequence indicates the presence of a structural gene that codes for a polypeptide of size 10,500 daltons. Possible gene products predicted from the nucleotide sequences and their role in replication control are discussed.

Genes and sites involved in replication and incompatibility of an R100 plasmid derivative based on nucleotide sequence analysis

The nucleotide sequence of the entire region required for autonomous replication and incompatibility of an R100 plasmid derivative, pSM1, has been determined. This region includes the replication region and all plasmid encoded information required for replication. Numerous reading frames for possible proteins can be found in this region. The existence of one of these proteins called RepA1 (285 amino acids; 33,000 daltons) which is encoded within the region known by cloning analysis to be required for replication is supported by several lines of evidence. These include an examination of the characteristic sequences on the proximal and distal ends of the coding region, a comparison of the sequence of the replication regions of pSM1 and the highly related R1 plasmid derivative Rsc13 as well as other biochemical and genetic evidence. The existence of two other proteins, RepA3 (64 amino acis; 7000 daltons) and RepA2 (103 amino acids; 11,400 daltons) is also consistent with most of the criteria mentioned above. However, the region encoding RepA3, which by cloning analysis is within the region responsible for both replication and incompatibility, has never been demonstrated to produce a 7,000 dalton polypeptide. Since a large secondary structure can be constructed in this region, it is possible that the region contains structure or other information that is responsible for incompatibility. RepA2, encoded entirely within the region identified by cloning analysis to be responsible for incompatibility but not for replication can be visualized in vivo and in vitro. However, the nucleotide sequence of the region encoding RepA2 is completely different in mutually incompatible plasmid derivatives of R1 and R100. It is therefore unlikely that RepA2 plays a major role in incompatibility. Thus, we predict that RepA2 is required to initiate DNA synthesis at the replication origin and that the region proximal to RepA2 either encodes a gene product or structure information that is responsible for incompatibility.