Molecular structure of the replication origin of a Bacillus amyloliquefaciens plasmid pFTB14

Small rolling circle plasmids in Bacillus subtilis and related species: Organization, distribution, and their possible role in host physiology

Bacillus subtilis and related species (Bacillus licheniformis, Bacillus pumilus, Bacillus amyloliquefaciens, and Bacillus mojavensis) represent a group of bacteria largely studied and widely employed by industry. Small rolling circle replicating plasmids of this group of bacteria have been intensively studied as they represent a convenient model for genetic research and for the construction of molecular tools for the genetic modification of their hosts. Through the computational analysis of the available plasmid sequences to date, the first part of this review focuses on the main stages that the present model for rolling circle replication involves, citing the research data which helped to elucidate the mechanism by which these molecules replicate. Analysis of the distribution and phylogeny of the small RC plasmids inside the Bacillus genus is then considered, emphasizing the low level of diversity observed among these plasmids through the in silico analysis of their organization and the sequence divergence of their replication module. Finally, the parasitic vs. mutualistic nature of small rolling circle plasmids is briefly discussed.

Distribution of Bacillus megaterium QM B1551 plasmids among other B. megaterium strains and Bacillus species

Bacillus megaterium QM B1551 contains seven plasmids. Two are small rolling circle plasmids and five are theta-replicating plasmids with cross-hybridizing replicons that define a new family of very homologous yet compatible theta replicons. Previous sequencing of several of the plasmids has shown genes with high similarity to those on the genomes and plasmids of other Gram-positive bacteria. To test the possible distribution of these plasmids, nine other B. megaterium strains and 20 other Bacillus or related species were tested for the presence of similar replicons, and specific flanking DNA by both hybridization and PCR. The theta replicons were widespread among the B. megaterium strains, and two had one or more of the rolling circle plasmids, but none of the plasmid replicon regions were observed in the other Bacillus or related species. It appears from the data that even though some plasmids carry genes suggesting horizontal transfer, their replicons seem to be unique to B. megaterium, or rarely present in related species.

Complete sequence and structural organization of pFL5 and pFL7, two cryptic plasmids from Bacillus licheniformis

The complete nucleotide sequences of two plasmids, pFL5 and pFL7, isolated from soil bacteria, Bacillus licheniformis FL5 and FL7, have been determined. The plasmids pFL5 and pFL7 were analyzed and found to be 9150 and 7853 bp in size with a G+C content of 41.0 and 43.6 mol%, respectively. Computer assisted analysis of sequence data revealed 11 possible ORFs in pFL5, four of which could be assigned no function from homology searches. Instead, eight putative ORFs were identified in pFL7, two of which appeared to have no biological function. All the ORFs were preceded by a ribosome binding site. The ORFs 9.5 and 6.7, each of 340 amino acids, were postulated to encode a replication protein similar to known replication proteins of rolling circle replicons, particularly those of the pC194 family. The structural organization of the two pFL plasmids is similar to the pTA plasmids family, with only a few putative coding regions that cannot be attributed to these plasmid backbone genes. In contrast to pTA plasmids, the majority of the genes have an orientation of transcription opposite to the direction of replication. The identified probable sso sequences seem to belong to a different group of those found in Bacillus plasmids; in fact, a significant level of homology was found with ssoA group sequences. These plasmids seem to be related to plasmids identified within the Bacillus subtilis group, confirming the low-level diversity among these replicons.

Development of a host-vector system for Lactobacillus plantarum L137 isolated from a traditional fermented food produced in the Philippines

Lactobacillus plantarum NC13, a strain derived from the L. plantarum strain L137 isolated from a traditional fermented food produced in the Philippines, contains 9 of the 15 plasmids in the parental strain. To construct a shuttle vector between L. plantarum and Escherichia coli for genetic manipulation of L137 and its derivatives, recombinant plasmids were prepared by using the 9-plasmid DNA mixture and an E. coli vector, pBluescript II SK+. The resultant recombinant plasmids were re-transferred to L. plantarum NCL21, an NC13-derived strain cured of 3 of the 9 plasmids, and 3 recombinant plasmids were obtained. The smallest plasmid, pRN14, contained a small cryptic plasmid, pLTK2, which is one of the plasmids in L. plantarum L137. Thus, the complete nucleotide sequence of pLTK2 was determined. The pLTK2 is 2295 bp in length, and has a major open reading frame of 951 bp. An encoded sequence of 317-amino acids showed extensive similarity with genes encoding replication protein (repA). A putative replication origin in pLTK2 also showed high homology to those of other gram-positive bacterial plasmids that replicate by the rolling circle mechanism. The shuttle vector pRN14 contained the erythromycin resistance gene and the ColE1 and pLTK2 replication origins. Transformation of L. plantarum strains with pRN14 by electroporation was optimized to give a transformation efficiency of 2 x 10(4) transformants/ mug plasmid. Plasmid pRN14 was stably maintained in strain NCL21, as well as in L. casei K95-5.

Rolling-circle plasmids from Bacillus subtilis: complete nucleotide sequences and analyses of genes of pTA1015, pTA1040, pTA1050 and pTA1060, and comparisons with related plasmids from gram-positive bacteria

Most small plasmids of Gram-positive bacteria use the rolling-circle mechanism of replication and several of these have been studied in considerable detail at the DNA level and for the function of their genes. Although most of the common laboratory Bacillus subtilis 168 strains do not contain plasmids, several industrial strains and natural soil isolates do contain rolling-circle replicating (RCR) plasmids. So far, knowledge about these plasmids was mainly limited to: (i) a classification into seven groups, based on size and restriction patterns; and (ii) DNA sequences of the replication region of a limited number of them. To increase the knowledge, also with respect to other functions specified by these plasmids, we have determined the complete DNA sequence of four plasmids, representing different groups, and performed computer-assisted and experimental analyses on the possible function of their genes. The plasmids analyzed are pTA1015 (5.8 kbp), pTA1040 (7.8 kbp), pTA1050 (8.4 kbp), and pTA1060 (8.7 kbp). These plasmids have a structural organization similar to most other known RCR plasmids. They contain highly related replication functions, both for leading and lagging strand synthesis. pTA1015 and pTA1060 contain a mobilization gene enabling their conjugative transfer. Strikingly, in addition to the conserved replication modules, these plasmids contain unique module(s) with genes which are not present on known RCR plasmids of other Gram-positive bacteria. Examples are genes encoding a type I signal peptidase and genes encoding proteins belonging to the family of response regulator aspartate phosphatases. The latter are likely to be involved in the regulation of post-exponential phase processes. The presence of these modules on plasmids may reflect an adaptation to the special conditions to which the host cells were exposed.

Rolling-circle replication of bacterial plasmids

Many bacterial plasmids replicate by a rolling-circle (RC) mechanism. Their replication properties have many similarities to as well as significant differences from those of single-stranded DNA (ssDNA) coliphages, which also replicate by an RC mechanism. Studies on a large number of RC plasmids have revealed that they fall into several families based on homology in their initiator proteins and leading-strand origins. The leading-strand origins contain distinct sequences that are required for binding and nicking by the Rep proteins. Leading-strand origins also contain domains that are required for the initiation and termination of replication. RC plasmids generate ssDNA intermediates during replication, since their lagging-strand synthesis does not usually initiate until the leading strand has been almost fully synthesized. The leading- and lagging-strand origins are distinct, and the displaced leading-strand DNA is converted to the double-stranded form by using solely the host proteins. The Rep proteins encoded by RC plasmids contain specific domains that are involved in their origin binding and nicking activities. The replication and copy number of RC plasmids, in general, are regulated at the level of synthesis of their Rep proteins, which are usually rate limiting for replication. Some RC Rep proteins are known to be inactivated after supporting one round of replication. A number of in vitro replication systems have been developed for RC plasmids and have provided insight into the mechanism of plasmid RC replication.

Characterization of pBP614, a putative rolling-circle plasmid from Bacillus popilliae

A plasmid, pBP614 (5.647 kb), has been isolated from the New Zealand Bacillus popilliae strain 17 and characterized by physical mapping, cloning, and sequencing. An open reading frame was found which could encode a protein with homology to the replication (Rep) proteins of rolling-circle plasmids. The predicted B. popilliae Rep protein shows closest homology to Rep proteins from Bacillus plasmids of the pC194 family. Sequences homologous to plus- and minus-strand replication origins were found. The minus-strand origin shows similarities to the pal-T type family. Taken together, these observations suggest that pBP614 is a rolling-circle plasmid, the first such plasmid characterized from B. popilliae.

A small plasmid, pCA2.4, from the cyanobacterium Synechocystis sp. strain PCC 6803 encodes a rep protein and replicates by a rolling circle mechanism

Different cryptic plasmids are widely distributed in many strains of cyanobacteria. A small cryptic plasmid, pCA2.4, from Synechocystis strain PCC 6803 was completely sequenced, and its replication mode was determined. pCA2.4 contained 2,378 bp and encoded a replication (Rep) protein, designated RepA. An analysis of the deduced amino acid sequence revealed that RepA of pCA2.4 has significant homology with Rep proteins of pKYM from Shigella sonnei, a pUB110 plasmid family from gram-positive bacteria, and with a protein corresponding to an open reading frame in a Nostoc plasmid and open reading frame C of Plectonema plasmid pRF1. pKYM and pUB110 family plasmids replicate by a rolling circle mechanism in which a Rep protein nicks the origin of replication to allow the generation of a single-stranded plasmid as a replication intermediate. RepA encoded by pC2.4 was expressed in Escherichia coli cells harboring a vector, pCRP336, containing the entire repA gene. The observed molecular weight of RepA was consistent with the value of 39,200 calculated from its deduced amino acid sequence, as was the N-terminal sequence analysis done through the 12th residue. Single-stranded plasmid DNA of pCA2.4 that was specifically degraded by S1 nuclease was detected in Synechocystis cells by Southern hybridization. These observations suggest that pCA2.4 replicates by a rolling circle mechanism in Synechocystis cells.

DNA sequence and analysis of a cryptic 4.2-kb plasmid from the filamentous cyanobacterium, Plectonema sp. strain PCC 6402

The 4194-bp plasmid, pRF1, from Plectonema sp. Strain PCC 6402 was completely sequenced and analyzed. Seven potential open reading frames were identified. The predicted amino acid sequence of open reading frame C (ORF C) had identities of 34, 29, and 25% with Rep B from the Staphylococcus aureus plasmid, pUB110; Rep from the Bacillus amyloliquefaciens plasmid, pFTB14; and protein A from the S. aureus plasmid, pC194, respectively. A 75-amino-acid region conserved in these proteins (Rep B, Rep, and protein A) also was highly conserved in ORF C with identities of 45, 37, and 40%, respectively. Significantly, 16 of the 21 amino acids conserved in Rep B, Rep, and protein A were found at the same positions in ORF C. This ORF may encode a replication protein that includes a region conserved in some eubacteria. Additional structural features include a 425-bp region that contains palindromes, tandem repeats, and short direct repeats which may correspond to the origin of replication. An 18-bp inverted repeat was located between two open reading frames, A and G.

Physical characterization of the replication origin of the cryptic plasmid pCB101 isolated from Clostridium butyricum NCIB 7423

The complete nucleotide sequence of a 3484-bp Sau3A fragment, previously shown to carry the replication origin of the Clostridium butyricum NCIB 7423 plasmid pCB101 (6.05 kb), has been determined. Of the four open reading frames (ORF A-D) identified within this fragment, two (B and C) were shown to be encoding by in vitro transcription/translation assays. Evidence was obtained that both polypeptides are required for autonomous replication of the plasmid in Bacillus subtilis. ORF C is immediately preceded by a small ORF (C') that encodes a relatively small polypeptide (50 amino acids) that demonstrates significant homology with RepA of plasmid pLS1. Whereas the ORF C polypeptide (27,100 Da) exhibits no homology to any known protein, that encoded by ORF B (RepB, 43,039 Da) exhibits significant homology with the Rep proteins of the pC194/pUB110 subfamily of single-strand (ss) DNA plasmids, which are widely distributed in gram-positive bacteria. Conserved amino acids include the presumed active site of topoisomerase activity and four cysteine residues in the N-terminus of all Rep proteins compared. The repB gene is preceded by a sequence motif exhibiting substantial homology to the "plus" origins of this family of ss DNA plasmids and was shown to act as a "hot spot" for deletion formation in certain plasmid chimaeras. The compelling suggestion that pCB101 replicates via a rolling circle mechanism was substantiated by the demonstration of ss DNA replication intermediates in B. subtilis cells carrying a pCB101-derived plasmid.

Homology of a plasmid from the spirochete Treponema denticola with the single-stranded DNA plasmids

The 2,647-bp nucleotide sequence of cryptic plasmid pTD1, isolated from the oral spirochete Treponema denticola, was determined. The sequence revealed two open reading frames, A and B, which encode polypeptides of 335 and 235 amino acids, respectively. Open reading frame A shows sequence similarity to genes that encode replication proteins from a group of plasmids common in gram-positive bacteria, which replicate via a single-stranded intermediate.

Structural organization of pBC1, a cryptic plasmid from Bacillus coagulans

The complete nucleotide sequence of the Bacillus coagulans plasmid pBC1 was determined. The sequence revealed an open reading frame encoding a polypeptide of 259 amino acids. This open reading frame shows sequence similarity to genes coding for replication-associated proteins in a group of gram-positive bacterial plasmids known to replicate via single-stranded intermediates. A region required for replication in cis, when the intact replicon is supplied in trans, was identified as well.

Molecular structure of the replication origin of a Bacillus subtilis (natto) plasmid, pUH1

The structure of a 2.0-kb BstEII DNA sequence necessary and sufficient for the replication of a 5.7-kb Natto plasmid, pUH1, which is responsible for gamma-polyglutamate production by Bacillus subtilis (natto), has been characterized by using a trimethoprim resistance gene derived from B. subtilis chromosomal DNA as a selective marker. The 2.0-kb DNA sequence contains an open reading frame, rep, stretching for 999 bp; a promoter region for rep expression; and a possible replication origin for the plasmid upstream of the promotor. The predicted Rep protein has highly homologous amino acid sequences with rep14 of pFTB14 in B. amyloliquefaciens, RepB of pUB110, and protein A, which is necessary for pC194 replication in staphylococci throughout the protein molecule, but is not homologous with RepC of staphylococcal plasmid pT181.

Structure and evolution of a family of genes encoding antiseptic and disinfectant resistance in Staphylococcus aureus

Resistance to antiseptics and disinfectants in Staphylococcus aureus, encoded by the qacC/qacD gene family, is associated with genetically dissimilar small, nontransmissible (pSK89) and large conjugative (pSK41) plasmids. The qacC and qacD genes were analysed in detail through deletion mapping and nucleotide sequence analysis, and shown to encode the same polypeptide, predicted to be 107 aa in size. Direct repeat elements flank the qacD gene, elements which also flank the qacC gene in truncated forms. These elements contain palA sequences, regions of DNA required for replication of some plasmids in S. aureus. The qacC gene is predicted to have evolved from the qacD gene, and in the process to have become reliant on new promoter sequences for its expression. The entire sequence of the 2.4-kb plasmid pSK89 (which contains qacC) was determined, and is compared with other plasmids from Gram + bacteria.

Characterization of gram-positive broad host-range plasmids carrying a thermophilic replicon

The cryptic plasmid pBC1 (1.6 kb) isolated from Bacillus coagulans Zu1961 was genetically marked with the genes for chloramphenicol and ampicillin resistance (CmR and ApR) from the Escherichia coli plasmid pJH101. The recombinant vector obtained (pCP49, 7.0 kb) replicated and expressed CmR in B. subtilis and CmR and ApR in E. coli. Different shuttle vectors for Gram+ bacteria were also constructed by inserting pBC1 into the Staphylococcus aureus plasmid pC194. The smallest of these, pLM6 (2.8 kb), containing essentially pBC1 and the chloramphenicol acetyl transferase gene from pC194, replicated in B. subtilis at a copy number of 60. By electroporation, these plasmids were introduced and stably maintained in B. subtilis, B. amyloliquefaciens, S. aureus, S. carnosus and Lactobacillus reuteri.

Lactobacillus hilgardii plasmid pLAB1000 consists of two functional cassettes commonly found in other gram-positive organisms

A Lactobacillus hilgardii plasmid, pLAB1000, was studied to understand the organization of autonomous replicons from lactobacilli. Two cassettes could be identified. First, the replication region consisted of a sequence coding for a replication protein (Rep) and its corresponding target site, similar to those from plasmids pUB110, pC194 (Staphylococcus aureus), pFTB14, pBAA1 (Bacillus sp.), and pLP1 (Lactobacillus sp.). Sequence analysis indicated the possible synthesis of an antisense RNA that might regulate Rep production. The results also suggested that pLAB1000 replicates via a single-stranded DNA intermediate, and a putative lagging-strand initiation site was found that had similarities to those of alpha 3, St-1, and G4 isometric bacteriophages. The second cassette of pLAB1000 consisted of a sequence coding for a putative mobilization protein (Mob) and its corresponding RSA site. This cassette was similar to those found in pT181, pUB110, pE194 (S. aureus), and pG12 (Bacillus sp.), and it was found to be conserved among different Lactobacillus plasmid replicons. The origin and evolution of these functional cassettes are also discussed.

Structural organization of pLP1, a cryptic plasmid from Lactobacillus plantarum CCM 1904

To construct shuttle vectors based on an endogenous replicon, we isolated a small cryptic plasmid (pLP1) from Lactobacillus plantarum CCM 1904. The nucleotide sequence (2093 bp, 38.25 GC mol%) revealed one major open reading frame encoding for a 317 amino acid protein (Rep). Comparisons with proteins encoded by other Gram-positive bacteria plasmids strongly suggest that the protein encoded by pLP1 has a replicative role. The presence of a consensus sequence including a tyrosine residue known to be the replication protein binding site to the DNA (in phage phi X174) strengthens this hypothesis. The DNA sequence contains also a sequence similar to the pC194 origin nick sequence, which initiates the plasmid replication at the plus origin, characteristic of plasmids which replicate following a rolling circle mechanism via single-stranded DNA intermediates. A set of 13 direct repeats of 17 bp could be involved in the expression of the incompatibility or in the copy number control as in the other plasmids. A promoter sequence located at the rep 5' region has been identified and is functional in Bacillus subtilis.

Replication and segregational stability of Bacillus plasmid pBAA1

A cryptic plasmid, pBAA1, was identified in an industrial Bacillus strain. The plasmid is 6.8 kilobases in size and is present in cells at a copy number of approximately 5 per chromosome equivalent. The plasmid has been maintained under industrial fermentation conditions without apparent selective pressure and so is assumed to be partition proficient. The minimal replicon was localized to a 1.4-kilobase fragment which also contains the functions required for copy number control. The very low level of segregational instability of the minimal replicon suggests that it also contains functions involved in plasmid maintenance. Comparison with other plasmids indicates that pBAA1 belongs to the group of small gram-positive plasmids which replicate by a rolling cycle-type mechanism. A sequence was identified which is required for the efficient conversion of the single plus strand to the double-stranded form during plasmid replication. Deletion of this sequence resulted in a low level of segregational plasmid instability.

Characterization of a gram-positive broad-host-range plasmid isolated from Lactobacillus hilgardii

Two plasmids, pLAB1000 and pLAB2000 (3.3 and 9.1 kb, respectively), have been isolated from a grass silage strain of Lactobacillus hilgardii. Both plasmids were cloned in Escherichia coli and characterized through restriction mapping. A 1.6-kb XbaI-SacI fragment of pLAB1000 appeared to be sufficient for autonomous replication in Lactobacillus plantarum and in Bacillus subtilis. Different shuttle vectors for E. coli and gram-positive bacteria were developed using the pLAB1000 plasmid. These could stably be maintained in Lactobacillus, Enterococcus, and Bacillus under selective conditions. Plasmids sharing DNA homologies with pLAB1000 have been observed in different strains of the related species L. plantarum.