Maintenance of the bacteriocinogenic plasmid Clo DF13 in Escherichia coli cells. I. Localisation and mutual interactions of four Clo DF13 incompatibility regions

The effect of the partition locus on plasmid stability and expression of a prolonged chemostat culture

The stability, copy number, and gene expression of the pBR322 plasmid containing the par-locus under prolonged cultivation were studied. In the initial stage of the experiment it was observed that the par-locus had a stabilization effect on plasmid maintenance. This observation was consistent with previously reported results. However, after approximately 225 h, a mixed population of plasmid-containing and plasmid-free cells appeared. The mixed culture was stably maintained for approximately 200 h. In addition, the relative plasmid copy number showed an increase as compared to the par- culture. After 100 h the copy number decreased, reached a minimum, then stabilized. The beta-lactamase activity, was not significantly affected by the par-locus.

The complete nucleotide sequence of the bacteriocinogenic plasmid CloDF13

The complete nucleotide sequence of the bacteriocinogenic plasmid CloDF13 has been determined. The plasmid consists of 9957 base pairs (molecular weight 6.64 X 10(6] with a GC content of 54.4%. At this moment 16 identified biological functions can be assigned to the primary structure of the CloDF13 DNA. The functions include those of eight protein encoding genes, two untranslated RNA species, and six DNA sites. We discuss these functions in relation to the structure of CloDF13 DNA. For convenience we have divided the CloDF13 genome into five defined regions: region I (origin of vegetative replication, priming and control of replication, type I incompatibility), region II (cloacin DF13, cloacin immunity, cloacin release, cloacin operon control), region III (double-stranded DNA-phage interaction, type II incompatibility, multimer resolution), region IV (inhibition of male specific RNA phages and transfer of Flac), and region V (mobility proteins, basis of mobility).

Effect of the deletion of a fragment dispensable for the autonomous maintenance of plasmid pT181 on the competition between incompatible plasmids

The deletion of the 560-bp HindIII C fragment from pT181 derivatives does not change the stability or copy number of the plasmid but affects its ability to compete with undeleted, incompatible plasmids for maintenance in the host cell. The disadvantage of the deleted plasmids seems to be manifested at the level of replication. It results that for plasmid pT181 a sequence dispensable for autonomous maintenance and replication control could affect the outcome of the competition between autonomous, incompatible plasmids.

Large-scale preparation of ribulosebisphosphate carboxylase from a recombinant system in Escherichia coli characterized by extreme plasmid instability

An ampicillin-resistant, RecA- strain of Escherichia coli (HB101) harboring the multicopy pBR322 plasmid containing the structural gene for ribulosebisphosphate carboxylase from Rhodospirillum rubrum was used to prepare large quantities of the carboxylase protein. This recombinant system was characterized by extreme plasmid instability, which resulted in part from the 1.7-fold faster growth rate of plasmid-free cells and in part from very rapid rates of plasmid segregation. The plasmid-containing organisms produced and excreted a large amount of beta-lactamase activity, with the result that ampicillin selection could only be maintained for a very short period of time, after which the plasmid-containing (carboxylase-producing) cells were overgrown by plasmid-free cells. The instability was so severe that even isolated colonies prepared on ampicillin-containing plates were impure and contained plasmid-free cells. Nevertheless, large quantities of carboxylase protein could be obtained from this system by using a highly dilute inoculum which allows selection of ampicillin-resistant (carboxylase-producing) organisms for a sufficient period of time so that the period of growth under nonselective conditions was minimized, and cells harvested at high cell densities contained large amounts of the carboxylase protein. In the present instance, 300-liter fermentations were initiated with a 0.3-microliter inoculum of freshly grown cells. After 20 h of growth in rich medium containing ampicillin, the harvested cells contained 74 g of ribulosebisphosphate carboxylase protein (average of two separate cultures). These results are discussed in terms of the general nature of plasmid instability and protocols available to minimize the effects of such instability.

Identification of an Rts1 DNA fragment conferring temperature-dependent instability to vector plasmids

The multiphenotypic drug resistance factor Rts1 expresses a temperature-dependent instability characteristic. This plasmid was digested with the restriction enzyme BamHI. A DNA fragment with a molecular weight of 5.6 MDa (the H fragment) was inserted into plasmid pBR322 (pFK896) or into pSC105 (pYH156) at the BamHI site. These plasmids were unstable at 42 degrees C but stable at 32 degrees C. A restriction-enzyme map of the H fragment was constructed and the instability phenotype (Tdi) was localized to a DNA fragment with 0.5 MDa molecular weight. The temperature-dependent loss of the unstable plasmid pFK896 is abrupt and no gradual plasmid loss of this multicopy recombinant plasmid is observed. The possibility that the Tdi phenotype is due to overgrowth of R- cells was eliminated.

Maintenance of multicopy plasmid Clo DF13 III. Role of plasmid size and copy number in partitioning

To elucidate the mechanisms that operate in plasmid maintenance, we analysed the stability of different combinations of Clo DF13 derivatives present in the same bacterial cell. From the data described in this paper we conclude: (i) each Clo DF13 plasmid molecule has an equal chance of colonizing daughter cells upon cell division, (ii) the Clo DF13 minimal replicon harbours functions involved in plasmid segregation and incompatibility, (iii) in the case of cells harbouring plasmid replicons which differ in size, the smaller plasmid is gradually lost from the cell population, (iv) in the case of cells habouring plasmid replicons which differ in copy number, the lower copy number plasmid is always lost from the cell population. The effect of plasmid copy number is dominant over the effect of plasmid size.

Regions of incompatibility in single-stranded DNA bacteriophages phi X174 and G4

The intracellular presence of a recombinant plasmid containing the intercistronic region between the genes H and A of bacteriophage phi X174 strongly inhibits the conversion of infecting single-stranded phi X DNA to parental replicative-form DNA. Also, transfection with single-stranded or double-stranded phi X174 DNA of spheroplasts from a strain containing such a "reduction" plasmid shows a strong decrease in phage yield. This phenomenon, the phi X reduction effect, was studied in more detail by using the phi X174 packaging system, by which plasmid DNA strands that contain the phi X(+) origin of replication were packaged as single-stranded DNA into phi X phage coats. These "plasmid particles" can transduce phi X-sensitive host cells to the antibiotic resistance coded for by the vector part of the plasmid. The phi X reduction sequence in the resident plasmid strongly affected the efficiency of the transduction process, but only when the transducing plasmid depended on primosome-mediated initiation of DNA synthesis for its conversion to double-stranded DNA. The combination of these results led to a model for the reduction effect in which the phi X reduction sequence interacted with an intracellular component that was present in limiting amounts and that specified the site at which phi X174 replicative-form DNA replication takes place. The phi X reduction sequence functioned as a viral incompatibility element in a way similar to the membrane attachment site model for plasmid incompatibility. In the DNA of bacteriophage G4, a sequence with a similar biological effect on infecting phages was identified. This reduction sequence not only inhibited phage G4 propagation, but also phi X174 infection.

Structure and regulation of gene expression of a Clo DF13 plasmid DNA region involved in plasmid segregation and incompatibility

The bacteriocinogenic plasmid Clo DF13 contains genetic information involved in the accurate partitioning of the plasmid (parA and parB) as well as in incompatibility phenomena (incA, B, C and D). In this paper we report on the primary structure and regulation of gene expression of the 29% - 50% part of Clo DF13, containing the DNA regions incA, incB and parB as well as genes K and L. According to the results of our DNA sequence analysis, mapping of transposon insertions, RNA blotting and S1 mapping experiments, we conclude that: a) genes K and L are transcribed as one operon; transcription of this operon is initiated at a promoter (P2) located at 32.5% and proceeds in a clockwise direction. b) treatment of cells with mitomycin-C, significantly enhances transcription from P2, although this promoter is probably not directly repressed by lexA protein. c) Termination of transcription of this operon occurs between genes K and L, as well as distal to gene L. The possible role of gene products and/or sites, located within the 29-50% DNA region, in plasmid incompatibility and segregation is discussed.

Localization and nucleotide sequence of the bom region of Clo DF13

Mobilization of the non-conjugative plasmid Clo DF13 requires both gene products of a conjugative plasmid and Clo DF13 encoded proteins as well as a cis-acting Clo DF13 DNA region, termed bom (basis of mobility). The bom region was located within a 264 bp fragment around the unique HpaI site. Comparison with the corresponding ColE1 and pBR322 sequences showed similarities with respect to the secondary structure. With respect to a possible relationship between the origin of vegetative replication (oriV) and the origin of transfer (oriT), we found that neither distance nor orientation of the Clo DF13 bom region with respect to oriV had any significant influence on the mobilization frequency. Surprisingly, after cloning of the 264 bp HpaII fragment in a bom- vector, restoration of the bom+ phenotype was only observed in one orientation. From these observations and from the sequence analysis of the bom region we suggest that transcription into this cloned bom fragment is essential for effective mobilization of the plasmid.

The use of a partition locus to increase stability of tryptophan-operon-bearing plasmids in Escherichia coli

The stability of different derivatives of plasmid vectors pBR322 and pACYC184 carrying the tryptophan operon of Escherichia coli was monitored in various media. It was found that in the absence of any special selective pressure, all plasmids were lost from the culture. The stability varied depending both on the orientation of the inserted tryptophan fragment and the growth media used. The pBR322::trp+ plasmids were lost at an average frequency of 0.3 to 0.8% per cell generation, while the pACYC184::trp+ plasmid was lost at a rate higher than 5%. In all cases the whole plasmid was lost at a rate higher than 5%. In all cases the whole plasmid was lost, indicating a high stability of the plasmid::cloned DNA as such. To increase the stability of the cloning vectors, the partition locus of plasmid pSC101 was added to both the pBR322::trp+ and pACYC184::trp+ plasmids. The addition of this gene increased the replicon stability at least 3- to 10-fold, with the pBR322::trp+-par+ plasmids being the most stable. Also in this case, the stability was dependent on the plasmid type and on the growth medium. In no case was there a discoordinate loss of the antibiotic-resistance and tryptophan genes from the vectors.