Gene organization and target specificity of the prokaryotic mobile genetic element IS26

IS26 and the IS26 family: versatile resistance gene movers and genome reorganizers

SUMMARYIn Gram-negative bacteria, the insertion sequence IS26 is highly active in disseminating antibiotic resistance genes. IS26 can recruit a gene or group of genes into the mobile gene pool and support their continued dissemination to new locations by creating pseudo-compound transposons (PCTs) that can be further mobilized by the insertion sequence (IS). IS26 can also enhance expression of adjacent potential resistance genes. IS26 encodes a DDE transposase but has unique properties. It forms cointegrates between two separate DNA molecules using two mechanisms. The well-known copy-in (replicative) route generates an additional IS copy and duplicates the target site. The recently discovered and more efficient and targeted conservative mechanism requires an IS in both participating molecules and does not generate any new sequence. The unit of movement for PCTs, known as a translocatable unit or TU, includes only one IS26. TU formed by homologous recombination between the bounding IS26s can be reincorporated via either cointegration route. However, the targeted conservative reaction is key to generation of arrays of overlapping PCTs seen in resistant pathogens. Using the copy-in route, IS26 can also act on a site in the same DNA molecule, either inverting adjacent DNA or generating an adjacent deletion plus a circular molecule carrying the DNA segment lost and an IS copy. If reincorporated, these circular molecules create a new PCT. IS26 is the best characterized IS in the IS26 family, which includes IS257/IS431, ISSau10, IS1216, IS1006, and IS1008 that are also implicated in spreading resistance genes in Gram-positive and Gram-negative pathogens.

Understanding the rapid spread of antimicrobial resistance genes mediated by IS26

Insertion sequences (ISs) promote the transmission of antimicrobial resistance genes (ARGs) across bacterial populations. However, their contributions and dynamics during the transmission of resistance remain unclear. In this study, we selected IS26 as a representative transposable element to decipher the relationship between ISs and ARGs and to investigate their transfer features and transmission trends. We retrieved 2656  translocatable  IS 26 -bounded  units with  ARGs (tIS26-bUs-ARGs) in complete bacterial genomes from the NCBI RefSeq database. In total, 124 ARGs spanning 12 classes of antibiotics were detected, and the average contribution rate of IS26 to these genes was 41.2%. We found that  IS 26 -bounded  units (IS26-bUs) mediated extensive ARG dissemination within the bacteria of the Gammaproteobacteria class, showing strong transfer potential between strains, species, and even phyla. The IS26-bUs expanded in bacterial populations over time, and their temporal expansion trend was significantly correlated with antibiotic usage. This wide dissemination could be due to the nonspecific target site preference of IS26. Finally, we experimentally confirmed that the introduction of a single copy of IS26 could lead to the formation of a composite transposon mediating the transmission of "passenger" genes. These observations extend our knowledge of the IS26 and provide new insights into the mediating role of ISs in the dissemination of antibiotic resistance.

The RuvABC Holliday Junction Processing System Is Not Required for IS26-Mediated Targeted Conservative Cointegrate Formation

The insertion sequence IS26 plays a key role in the spread of antibiotic resistance genes in Gram-negative bacteria. IS26 and members of the IS26 family are able to use two distinct mechanisms to form cointegrates made up of two DNA molecules linked via directly oriented copies of the IS. The well-known copy-in (formerly replicative) reaction occurs at very low frequency, and the more recently discovered targeted conservative reaction, which joins two molecules that already include an IS, is substantially more efficient. Experimental evidence has indicated that, in the targeted conservative mode, the action of Tnp26, the IS26 transposase, is required only at one end. How the Holliday junction (HJ) intermediate generated by the Tnp26-catalyzed single-strand transfer is processed to form the cointegrate is not known. We recently proposed that branch migration and resolution via the RuvABC system may be needed to process the HJ; here, we have tested this hypothesis. In reactions between a wild-type and a mutant IS26, the presence of mismatched bases near one IS end impeded the use of that end. In addition, evidence of gene conversion, potentially consistent with branch migration, was detected in some of the cointegrates formed. However, the targeted conservative reaction occurred in strains that lacked the recG, ruvA, or ruvC genes. As the RuvC HJ resolvase is not required for targeted conservative cointegrate formation, the HJ intermediate formed by the action of Tnp26 must be resolved by an alternate route. IMPORTANCE In Gram-negative bacteria, the contribution of IS26 to the spread of antibiotic resistance and other genes that provide cells with an advantage under specific conditions far exceeds that of any other known insertion sequence. This is likely due to the unique mechanistic features of IS26 action, particularly its propensity to cause deletions of adjacent DNA segments and the ability of IS26 to use two distinct reaction modes for cointegrate formation. The high frequency of the unique targeted conservative reaction mode that occurs when both participating molecules include an IS26 is also key. Insights into the detailed mechanism of this reaction will help to shed light on how IS26 contributes to the diversification of the bacterial and plasmid genomes it is found in. These insights will apply more broadly to other members of the IS26 family found in Gram-positive as well as Gram-negative pathogens.

Dissemination of metaldehyde catabolic pathways is driven by mobile genetic elements in Proteobacteria

Bioremediation of metaldehyde from drinking water using metaldehyde-degrading strains has recently emerged as a promising alternative. Whole-genome sequencing was used to obtain full genomes for metaldehyde degraders Acinetobacter calcoaceticus E1 and Sphingobium CMET-H. For the former, the genetic context of the metaldehyde-degrading genes had not been explored, while for the latter, none of the degrading genes themselves had been identified. In A. calcoaceticus E1, IS91 and IS6-family insertion sequences (ISs) were found surrounding the metaldehyde-degrading gene cluster located in plasmid pAME76. This cluster was located in closely-related plasmids and associated to identical ISs in most metaldehyde-degrading β- and γ-Proteobacteria, indicating horizontal gene transfer (HGT). For Sphingobium CMET-H, sequence analysis suggested a phytanoyl-CoA family oxygenase as a metaldehyde-degrading gene candidate due to its close homology to a previously identified metaldehyde-degrading gene known as mahX. Heterologous gene expression in Escherichia coli alongside degradation tests verified its functional significance and the degrading gene homolog was henceforth called mahS. It was found that mahS is hosted within the conjugative plasmid pSM1 and its genetic context suggested a crossover between the metaldehyde and acetoin degradation pathways. Here, specific replicons and ISs responsible for maintaining and dispersing metaldehyde-degrading genes in α, β and γ-Proteobacteria through HGT were identified and described. In addition, a homologous gene implicated in the first step of metaldehyde utilisation in an α-Proteobacteria was uncovered. Insights into specific steps of this possible degradation pathway are provided.

Characterization of the specific DNA-binding properties of Tnp26, the transposase of insertion sequence IS26

The bacterial insertion sequence (IS) IS26 mobilizes and disseminates antibiotic resistance genes. It differs from bacterial IS that have been studied to date as it exclusively forms cointegrates via either a copy-in (replicative) or a recently discovered targeted conservative mode. To investigate how the Tnp26 transposase recognizes the 14-bp terminal inverted repeats (TIRs) that bound the IS, amino acids in two domains in the N-terminal (amino acids M1-P56) region were replaced. These changes substantially reduced cointegration in both modes. Tnp26 was purified as a maltose-binding fusion protein and shown to bind specifically to dsDNA fragments that included an IS26 TIR. However, Tnp26 with an R49A or a W50A substitution in helix 3 of a predicted trihelical helix-turn-helix domain (amino acids I13-R53) or an F4A or F9A substitution replacing the conserved amino acids in a unique disordered N-terminal domain (amino acids M1-D12) did not bind. The N-terminal M1-P56 fragment also bound to the TIR but only at substantially higher concentrations, indicating that other parts of Tnp26 enhance the binding affinity. The binding site was confined to the internal part of the TIR, and a G to T nucleotide substitution in the TGT at positions 6 to 8 of the TIR that is conserved in most IS26 family members abolished binding of both Tnp26 (M1-M234) and Tnp26 M1-P56 fragment. These findings indicate that the helix-turn-helix and disordered domains of Tnp26 play a role in Tnp26-TIR complex formation. Both domains are conserved in all members of the IS26 family.

IS26 cannot move alone

BACKGROUND

IS26 plays a major role in the dissemination of antibiotic resistance determinants in Gram-negative bacteria.

OBJECTIVES

To determine whether insertion sequence IS26 is able to move alone (simple transposition) or if it exclusively forms cointegrates.

METHODS

A two-step PCR using outward-facing primers was used to search for circular IS26 molecules. Gibson assembly was used to clone a synthetic IS26 containing a catA1 chloramphenicol resistance gene downstream of the tnp26 transposase gene into pUC19. IS activity in a recA-Escherichia coli containing the non-conjugative pUC19-derived IS26::catA1 construct and the conjugative plasmid R388 was detected using a standard mating-out assay. Transconjugants were screened for resistance.

RESULTS

Circular IS26 molecules that would form with a copy-out route were not detected by PCR. The synthetic IS26::catA1 construct formed CmRTpR transconjugants (where CmR and TpR stand for chloramphenicol resistant and trimethoprim resistant, respectively), representing an R388 derivative carrying the catA1 gene at a frequency of 5.6 × 10-7 CmRTpR transconjugants per TpR transconjugant, which is comparable to the copy-in activity of the unaltered IS26. To test for simple transposition of IS26::catA1 (without the plasmid backbone), 1200 CmRTpR colonies were screened and all were resistant to ampicillin, indicating that the pUC19 backbone was present. Hence, IS26::catA1 had only formed cointegrates.

CONCLUSIONS

IS26 is unable to move alone and cointegrates are the exclusive end products of the reactions mediated by the IS26 transposase Tnp26. Consequently, when describing the formation of complex resistance regions, simple 'transposition' of a single IS26 should not be invoked.

The IS6 family, a clinically important group of insertion sequences including IS26

The IS6 family of bacterial and archaeal insertion sequences, first identified in the early 1980s, has proved to be instrumental in the rearrangement and spread of multiple antibiotic resistance. Two IS, IS26 (found in many enterobacterial clinical isolates as components of both chromosome and plasmids) and IS257 (identified in the plasmids and chromosomes of gram-positive bacteria), have received particular attention for their clinical impact. Although few biochemical data are available concerning the transposition mechanism of these elements, genetic studies have provided some interesting observations suggesting that members of the family might transpose using an unexpected mechanism. In this review, we present an overview of the family, the distribution and phylogenetic relationships of its members, their impact on their host genomes and analyse available data concerning the particular transposition pathways they may use. We also provide a mechanistic model that explains the recent observations on one of the IS6 family transposition pathways: targeted cointegrate formation between replicons.

Targeted Conservative Cointegrate Formation Mediated by IS26 Family Members Requires Sequence Identity at the Reacting End

IS26 forms cointegrates using two distinct routes, a copy-in mechanism involving one insertion sequence (IS) and a target and a targeted conservative mechanism involving two ISs in different DNA molecules. In this study, the ability of IS26 and some close relatives, IS1006, IS1008, and a natural hybrid, IS1006/IS1008, which are found predominantly in Acinetobacter spp., to interact was examined. IS1006/1008 consists of 175 bp from IS1006 at the left end, with the remainder from IS1008. These ISs all have the same 14-bp terminal inverted repeats, and the Tnp26, Tnp1006, and Tnp1008 transposases, with pairwise identities of 83.7% to 93.1%, should be able to recognize each other's ends. In a recA-negative Escherichia coli strain, IS1006, IS1008, and IS1006/1008 each formed cointegrates via the copy-in route and via the targeted conservative route, albeit at frequencies for the targeted reaction at least 10-fold lower than for IS26 However, using mixed pairs, targeted cointegration was detected only when IS1008 was paired with the IS1006/1008 hybrid, which also encodes Tnp1008, and the targeted cointegrates formed all arose from a reaction occurring at the end where the DNA sequences are identical. The reaction also occurred at the end with extended DNA identity using IS26 paired with IS26::catA1, an artificially constructed IS26 derivative that includes the catA1 gene. Thus, both identical transposases and identical DNA sequences at the reacting end were required. These features indicate that the targeted conservative pathway proceeds via a single transposase-catalyzed strand transfer, followed by migration and resolution of the Holliday junction formed.IMPORTANCE The IS26 family includes the ISs that are commonly found associated with antibiotic resistance genes in multiply resistant Gram-negative and Gram-positive bacteria. IS26 is most prevalent in Gram-negative species and can generate the clusters of antibiotic resistance genes interspersed with directly oriented IS26 seen in multiply resistant pathogens. This ability relies on the novel dual mechanistic capabilities of IS26 family members. However, the mechanism underlying the recently discovered targeted conservative mode of cointegrate formation mediated by IS26, IS257/IS431, and IS1216, which is unlike any previously studied IS movement mechanism, is not well understood. An important question is what features of the IS and the transposase are key to allowing IS26 family members to undertake targeted conservative reaction. In this study, this question was addressed using mixed-partner crosses involving IS26 and naturally occurring close relatives of IS26 that are found near resistance genes in Acinetobacter baumannii and are widespread in Acinetobacter species.

Complete Genome Sequencing of Acinetobacter baumannii AC1633 and Acinetobacter nosocomialis AC1530 Unveils a Large Multidrug-Resistant Plasmid Encoding the NDM-1 and OXA-58 Carbapenemases

Carbapenem-resistant Acinetobacter spp. are considered priority drug-resistant human-pathogenic bacteria. The genomes of two carbapenem-resistant Acinetobacter spp. clinical isolates obtained from the same tertiary hospital in Terengganu, Malaysia, namely, A. baumannii AC1633 and A. nosocomialis AC1530, were sequenced. Both isolates were found to harbor the carbapenemase genes blaNDM-1 and blaOXA-58 in a large (ca. 170 kb) plasmid designated pAC1633-1 and pAC1530, respectively, that also encodes genes that confer resistance to aminoglycosides, sulfonamides, and macrolides. The two plasmids were almost identical except for the insertion of ISAba11 and an IS4 family element in pAC1633-1, and ISAba11 along with relBE toxin-antitoxin genes flanked by inversely orientated pdif (XerC/XerD) recombination sites in pAC1530. The blaNDM-1 gene was encoded in a Tn125 composite transposon structure flanked by ISAba125, whereas blaOXA-58 was flanked by ISAba11 and ISAba3 downstream and a partial ISAba3 element upstream within a pdif module. The presence of conjugative genes in plasmids pAC1633-1/pAC1530 and their discovery in two distinct species of Acinetobacter from the same hospital are suggestive of conjugative transfer, but mating experiments failed to demonstrate transmissibility under standard laboratory conditions. Comparative sequence analysis strongly inferred that pAC1633-1/pAC1530 was derived from two separate plasmids in an IS1006-mediated recombination or transposition event. A. baumannii AC1633 also harbored three other plasmids designated pAC1633-2, pAC1633-3, and pAC1633-4. Both pAC1633-3 and pAC1633-4 are cryptic plasmids, whereas pAC1633-2 is a 12,651-bp plasmid of the GR8/GR23 Rep3-superfamily group that encodes the tetA(39) tetracycline resistance determinant in a pdif module.IMPORTANCE Bacteria of the genus Acinetobacter are important hospital-acquired pathogens, with carbapenem-resistant A. baumannii listed by the World Health Organization as the one of the top priority pathogens. Whole-genome sequencing of carbapenem-resistant A. baumannii AC1633 and A. nosocomialis AC1530, which were isolated from the main tertiary hospital in Terengganu, Malaysia, led to the discovery of a large, ca. 170-kb plasmid that harbored genes encoding the New Delhi metallo-β-lactamase-1 (NDM-1) and OXA-58 carbapenemases alongside genes that conferred resistance to aminoglycosides, macrolides, and sulfonamides. The plasmid was a patchwork of multiple mobile genetic elements and comparative sequence analysis indicated that it may have been derived from two separate plasmids through an IS1006-mediated recombination or transposition event. The presence of such a potentially transmissible plasmid encoding resistance to multiple antimicrobials warrants vigilance, as its spread to susceptible strains would lead to increasing incidences of antimicrobial resistance.

Antimicrobial resistance gene shuffling and a three-element mobilisation system in the monophasic Salmonella typhimurium strain ST1030

In this study we describe the genetic elements and the antimicrobial resistance units (RUs) harboured by the Salmonella Typhimurium monophasic variant 1,4,[5],12:i:- strain ST1030. Of the three identified RUs two were chromosomal, RU1 (IS26-bla_TEM-1-IS26-strAB-sul2- IS26) and RU2 (IS26-tetR(B)-tetA(B)-ΔIS26), and one, RU3 (a sul3-associated class 1 integron with cassette array dfrA12-orfF-aadA2-cmlA1-aadA1), was embedded in a Tn21-derived element harboured by the conjugative I1 plasmid pST1030-1A. IS26 elements mediated the antimicrobial resistance gene (ARG) shuffling and this gave rise to pST1030-1A derivatives with different sets of ARGs. ST1030 also harboured two ColE1-like plasmids of which one, pST1030-2A, was mobilisable and the target of an intracellular translocation of the Tn21-derived element; the second (pST1030-3) was an orphan mob-associated oriT plasmid co-transferred with pST1030-1A and pST1030-2A. pST1030-2A and pST1030-3 also carried a parA gene and a type III restriction modification system, respectively. Overall analysis of our data reinforces the role played by IS26, Tn21-derived elements and non-conjugative plasmids in the spread of ARGs and supplies the first evidence, at least in Salmonella, for the identification of a natural isolate harbouring a three-element mobilisation system in the same cell.

A single Proteus mirabilis lineage from human and animal sources: a hidden reservoir of OXA-23 or OXA-58 carbapenemases in Enterobacterales

In Enterobacterales, the most common carbapenemases are Ambler's class A (KPC-like), class B (NDM-, VIM- or IMP-like) or class D (OXA-48-like) enzymes. This study describes the characterization of twenty-four OXA-23 or OXA-58 producing-Proteus mirabilis isolates recovered from human and veterinary samples from France and Belgium. Twenty-two P. mirabilis isolates producing either OXA-23 (n = 21) or OXA-58 (n = 1), collected between 2013 and 2018, as well as 2 reference strains isolated in 1996 and 2015 were fully sequenced. Phylogenetic analysis revealed that 22 of the 24 isolates, including the isolate from 1996, belonged to a single lineage that has disseminated in humans and animals over a long period of time. The blaOXA-23 gene was located on the chromosome and was part of a composite transposon, Tn6703, bracketed by two copies of IS15∆II. Sequencing using Pacbio long read technology of OXA-23-producing P. mirabilis VAC allowed the assembly of a 55.5-kb structure encompassing the blaOXA-23 gene in that isolate. By contrast to the blaOXA-23 genes, the blaOXA-58 gene of P. mirabilis CNR20130297 was identified on a 6-kb plasmid. The acquisition of the blaOXA-58 gene on this plasmid involved XerC-XerD recombinases. Our results suggest that a major clone of OXA-23-producing P. mirabilis is circulating in France and Belgium since 1996.

A Novel, Integron-Regulated, Class C β-Lactamase

AmpC-type β-lactamases severely impair treatment of many bacterial infections, due to their broad spectrum (they hydrolyze virtually all β-lactams, except fourth-generation cephalosporins and carbapenems) and the increasing incidence of plasmid-mediated versions. The original chromosomal AmpCs are often tightly regulated, and their expression is induced in response to exposure to β-lactams. Regulation of mobile ampC expression is in many cases less controlled, giving rise to constitutively resistant strains with increased potential for development or acquisition of additional resistances. We present here the identification of two integron-encoded ampC genes, bla_IDC-1 and bla_IDC-2 (integron-derived cephalosporinase), with less than 85% amino acid sequence identity to any previously annotated AmpC. While their resistance pattern identifies them as class C β-lactamases, their low isoelectric point (pI) values make differentiation from other β-lactamases by isoelectric focusing impossible. To the best of our knowledge, this is the first evidence of an ampC gene cassette within a class 1 integron, providing a mobile context with profound potential for transfer and spread into clinics. It also allows bacteria to adapt expression levels, and thus reduce fitness costs, e.g., by cassette-reshuffling. Analyses of public metagenomes, including sewage metagenomes, show that the discovered ampCs are primarily found in Asian countries.

IS26 Family Members IS257 and IS1216 Also Form Cointegrates by Copy-In and Targeted Conservative Routes

IS26 differs from other studied ISs in the reactions that it can undertake. The differences make IS26 uniquely suited to its key role in the recruitment and spread of antibiotic resistance genes in Gram-negative bacteria. However, whether other ISs in the IS6/IS26 family can perform the same reactions is not known. IS257/IS431 and IS1216 isoforms found associated with antibiotic resistance genes in the Gram-positive bacteria staphylococci, enterococci, streptococci, and clostridia are related to IS26. However, the way that they move had not been investigated, limiting interpretation of their role in resistance gene dissemination and in the formation of cointegrates and complex resistance regions in staphylococci and enterococci. Here, they are shown to share the broad catalytic capabilities of IS26, demonstrating that it is likely that all members of the redefined IS6/IS26 family of bacterial ISs likewise are able to use both the copy-in and conservative routes.

IS26 has been shown to form cointegrates both by a copy-in mechanism involving one insertion sequence (IS) and a target and by a targeted conservative mechanism involving two ISs. IS26 is the flagship of a group of 65 bacterial ISs in the recently redefined IS6/IS26 family. Here, whether other family members can also use two mechanisms was examined using members of the IS257/IS431 and IS1216 isoform groups, which are associated with antibiotic resistance genes in staphylococci and enterococci, respectively. Transposases Tnp257 and Tnp1216 have 39% and 47% amino acid identities, respectively, with Tnp26 and are 62% identical to one another. Using a novel transposition assay, pUC-based plasmids carrying these ISs integrated into the chromosome of a temperature-sensitive polAEscherichia coli strain grown at the restrictive temperature. In the cointegrates, the plasmid carrying IS257 was flanked by various 8-bp target site duplications, consistent with random target selection. However, in a mating-out assay, only the targeted conservative reaction was detectable at a low frequency in a recA-negative E. coli strain, indicating that IS257 is at least 100-fold less active than IS26. For IS1216, in mating-out assays, both copy-in and targeted conservative cointegrate formation were detectable at frequencies similar to those observed for IS26. Duplication of various 8-bp target sites was detected for the copy-in route. For both IS257 and IS1216, when both of the plasmids carried an IS, the targeted conservative route occurred at a significantly higher frequency than the copy-in route, and only cointegrates formed by the conservative route were detected.

IMPORTANCE IS26 differs from other studied ISs in the reactions that it can undertake. The differences make IS26 uniquely suited to its key role in the recruitment and spread of antibiotic resistance genes in Gram-negative bacteria. However, whether other ISs in the IS6/IS26 family can perform the same reactions is not known. IS257/IS431 and IS1216 isoforms found associated with antibiotic resistance genes in the Gram-positive bacteria staphylococci, enterococci, streptococci, and clostridia are related to IS26. However, the way that they move had not been investigated, limiting interpretation of their role in resistance gene dissemination and in the formation of cointegrates and complex resistance regions in staphylococci and enterococci. Here, they are shown to share the broad catalytic capabilities of IS26, demonstrating that it is likely that all members of the redefined IS6/IS26 family of bacterial ISs likewise are able to use both the copy-in and conservative routes.

An analysis of the IS6/IS26 family of insertion sequences: is it a single family?

The relationships within a curated set of 112 insertion sequences (ISs) currently assigned to the IS6 family, here re-named the IS6/IS26 family, in the ISFinder database were examined. The encoded DDE transposases include a helix-helix-turn-helix (H-HTH) potential DNA binding domain N-terminal to the catalytic (DDE) domain, but 10 from Clostridia include one or two additional N-terminal domains. The transposase phylogeny clearly separated 75 derived from bacteria from 37 from archaea. The longer bacterial transposases also clustered separately. The 65 shorter bacterial transposases, including Tnp26 from IS26, formed six clades but share significant conservation in the H-HTH domain and in a short extension at the N-terminus, and several amino acids in the catalytic domain are completely or highly conserved. At the outer ends of these ISs, 14 bp were strongly conserved as terminal inverted repeats (TIRs) with the first two bases (GG) and the seventh base (G) present in all except one IS. The longer bacterial transposases are only distantly related to the short bacterial transposases, with only some amino acids conserved. The TIR consensus was longer and only one IS started with GG. The 37 archaeal transposases are only distantly related to either the short or the long bacterial transposases and different residues were conserved. Their TIRs are loosely related to the bacterial TIR consensus but are longer and many do not begin with GG. As they do not fit well with most bacterial ISs, the inclusion of the archaeal ISs and the longer bacterial ISs in the IS6/IS26 family is not appropriate.

CDI/CDS system-encoding genes of Burkholderia thailandensis are located in a mobile genetic element that defines a new class of transposon

Intercellular communication and self-recognition are critical for coordinating cooperative and competitive behaviors during sociomicrobiological community development. Contact-dependent growth inhibition (CDI) proteins are polymorphic toxin delivery systems that inhibit the growth of non-self neighboring bacteria that lack the appropriate immunity protein. In Burkholderia thailandensis, CDI system proteins (encoded by bcpAIOB genes) also induce cooperative behaviors among sibling (self) cells, a phenomenon called contact-dependent signaling (CDS). Here we describe a mobile genetic element (MGE) that carries the bcpAIOB genes in B. thailandensis E264. It is a ~210 kb composite transposon with insertion sequence (IS) elements at each end. Although the ISs are most similar to IS2 of Escherichia coli, the transposase-dependent intermediate molecule displays characteristics more similar to those of the IS26 translocatable unit (TU). A reaction requiring only the “left” IS-encoded transposase results in formation of an extrachromosomal circular dsDNA intermediate (“the megacircle”) composed of the left IS and the sequences intervening between the ISs. Insertion of the megacircle into the chromosome occurs next to a pre-existing copy of an IS2-like element, recreating a functional composite transposon. We found that BcpA activity is required for megacircle formation, and in turn, megacircle formation is required for CDS phenotypes. Our data support a model in which the bcpAIOB genes function as both helping and harming greenbeard genes, simultaneously enhancing the fitness of self bacteria that possess the same allele plus tightly linked genes that mediate cooperative behaviors, and killing non-self bacteria that do not possess the same bcpAIOB allele. Mobility of the megacircle between cells could allow bacteria invading a community to be converted to self, and would facilitate propagation of the bcpAIOB genes in the event that the invading strain is capable of overtaking the resident community.

As social organisms, bacteria have evolved multiple ways to communicate and interact with their neighbors. Some of these interactions can be beneficial or harmful to certain members of the community, and others involve sharing of genetic material capable of transforming the recipient cell. In this study, we provide evidence for a mobile genetic element that carries the genes encoding proteins involved in bacterial killing (contact-dependent inhibition, CDI) or cooperation (contact-dependent signaling, CDS) within microbial communities. Our findings suggest the element mobilizes with a copy-out-paste-in mechanism that requires formation of a large circular DNA molecule we call “the megacircle”. We also show that production of the megacircle requires a functional CDI/CDS system and that synthesis of the megacircle is necessary for cooperation-associated phenotypes. We hypothesize that acquisition of the megacircle provides a means to transform a target cell that does not produce the same CDI/CDS system into one that is immune to inhibition via CDI, and that can participate in the cooperative behaviors of the community.

IS26 mediated antimicrobial resistance gene shuffling from the chromosome to a mosaic conjugative FII plasmid

In the present study we report the identification of a sul3-associated class 1 integron containing the dfrA12-orfF-aadA2-cmlA1-aadA1-qacH array embedded in a Tn21-derived element that is part of a conjugative FII plasmid named pST1007-1A. The plasmid was identified in the Salmonella Typhimurium strain ST1007, a member of a clinically relevant clonal MDR lineage diffuse in Italy. ST1007 exhibited resistance to ampicillin, chloramphenicol, streptomycin, sulphamethoxazole, tetracycline and trimethoprim encoded by bla_TEM-1, cmlA1, (aadA1, aadA2, strAB), (sul2, sul3), tet(B) and dfrA12 genes, respectively. Apart from pST1007-1A, ST1007 also harbours two chromosome-integrated resistance units RU1 (bla_TEM-1-sul2-strAB) and RU2 (tet(B)), flanked by IS26 elements. RU1 and RU2 were able to move as translocatable units, respectively TU1 and TU2, and integrate via IS26 mediated recombination into pST1007-1A. A family of conjugative plasmids, harbouring different sets of antimicrobial resistance genes (ARG) was then generated: pST1007-1B (dfrA12-aadA2-cmlA1-aadA1-sul3- tet(B)), pST1007-1C (dfrA12-aadA2-cmlA1-aadA1-sul3-bla_TEM-1-sul2-strAB), pST1007-1D (bla_TEM-1-sul2-strAB), pST1007-1E (tet(B)) and pST1007-1F (dfrA12-aadA2-cmlA1-aadA1-sul3- tet(B) -bla_TEM-1-sul2-strAB). pST1007-1A is also a mosaic plasmid containing two distinct DNA fragments acquired from I1 plasmids through recombination within the repA4, rfsF and repeat-3 sites. This study further highlights the role played by IS26 in intracellular ARGs shuffling. Moreover, attention has been focused on recombination hot spots that might play a key role in generating mosaic plasmids.

IncP Plasmid Carrying Colistin Resistance Gene mcr-1 in Klebsiella pneumoniae from Hospital Sewage

A Klebsiella pneumoniae strain of sequence type 313 (ST313) recovered from hospital sewage was found carrying the plasmid-borne colistin resistance gene mcr-1, which was bracketed by two copies of the insertion sequence ISApl1 on a 57-kb self-transmissible IncP-type plasmid of a new IncP-1 clade. The carriage of mcr-1 on a self-transmissible broad-host-range plasmid highlights that mcr-1 has the potential to spread beyond the Enterobacteriaceae family.

IS26-Mediated Precise Excision of the IS26-aphA1a Translocatable Unit

We recently showed that, in the absence of RecA-dependent homologous recombination, the Tnp26 transposase catalyzes cointegrate formation via a conservative reaction between two preexisting IS26, and this is strongly preferred over replicative transposition to a new site. Here, the reverse reaction was investigated by assaying for precise excision of the central region together with a single IS26 from a compound transposon bounded by IS26. In a recA mutant strain, Tn4352, a kanamycin resistance transposon carrying the aphA1a gene, was stable. However, loss of kanamycin resistance due to precise excision of the translocatable unit (TU) from the closely related Tn4352B, leaving behind the second IS26, occurred at high frequency. Excision occurred when Tn4352B was in either a high- or low-copy-number plasmid. The excised circular segment, known as a TU, was detected by PCR. Excision required the IS26 transposase Tnp26. However, the Tnp26 of only one IS26 in Tn4352B was required, specifically the IS26 downstream of the aphA1a gene, and the excised TU included the active IS26. The frequency of Tn4352B TU loss was influenced by the context of the transposon, but the critical determinant of high-frequency excision was the presence of three G residues in Tn4352B replacing a single G in Tn4352. These G residues are located immediately adjacent to the two G residues at the left end of the IS26 that is upstream of the aphA1a gene. Transcription of tnp26 was not affected by the additional G residues, which appear to enhance Tnp26 cleavage at this end.

Resistance to antibiotics limits treatment options. In Gram-negative bacteria, IS26 plays a major role in the acquisition and dissemination of antibiotic resistance. IS257 (IS431) and IS1216, which belong to the same insertion sequence (IS) family, mobilize resistance genes in staphylococci and enterococci, respectively. Many different resistance genes are found in compound transposons bounded by IS26, and multiply and extensively antibiotic-resistant Gram-negative bacteria often include regions containing several antibiotic resistance genes and multiple copies of IS26. We recently showed that in addition to replicative transposition, IS26 can use a conservative movement mechanism in which an incoming IS26 targets a preexisting one, and this reaction can create these regions. This mechanism differs from that of all the ISs examined in detail thus far. Here, we have continued to extend understanding of the reactions carried out by IS26 by examining whether the reverse precise excision reaction is also catalyzed by the IS26 transposase.

Tn6026 and Tn6029 are found in complex resistance regions mobilised by diverse plasmids and chromosomal islands in multiple antibiotic resistant Enterobacteriaceae

Transposons flanked by direct copies of IS26 are important contributors to the evolution of multiple antibiotic resistance. Tn6029 and Tn6026 are examples of composite transposons that have become widely disseminated on small and large plasmids with different incompatibility markers in pathogenic and commensal Escherichia coli and various serovars of Salmonella enterica. Some of the plasmids that harbour these transposons also carry combinations of virulence genes. Recently, Tn6029 and Tn6026 and derivatives thereof have been found on chromosomal islands in both established and recently emerged pathogens. While Tn6029 and Tn6026 carry genes encoding resistance to older generation antibiotics, they also provide a scaffold for the introduction of genes encoding resistance to a wide variety of clinically relevant antibiotics that are mobilised by IS26. As a consequence, Tn6029 and Tn6026 or variants are likely to increasingly feature in complex resistance regions in multiple antibiotic resistant Enterobacteriaceae that threaten the health of humans and food production animals.

A role for Tn6029 in the evolution of the complex antibiotic resistance gene loci in genomic island 3 in enteroaggregative hemorrhagic Escherichia coli O104:H4

In enteroaggregative hemorrhagic Escherichia coli (EAHEC) O104 the complex antibiotic resistance gene loci (CRL) found in the region of divergence 1 (RD1) within E. coli genomic island 3 (GI3) contains bla_TEM-1, strAB, sul2, tet(A)A, and dfrA7 genes encoding resistance to ampicillin, streptomycin, sulfamethoxazole, tetracycline and trimethoprim respectively. The precise arrangement of antibiotic resistance genes and the role of mobile elements that drove the evolutionary events and created the CRL have not been investigated. We used a combination of bioinformatics and iterative BLASTn searches to determine the micro-evolutionary events that likely led to the formation of the CRL in GI3 using the closed genome sequences of EAHEC O104:H4 strains 2011C-3493 and 2009EL-2050 and high quality draft genomes of EAHEC E. coli O104:H4 isolates from sporadic cases not associated with the initial outbreak. Our analyses indicate that the CRL in GI3 evolved from a progenitor structure that contained an In2-derived class 1 integron in a Tn21/Tn1721 hybrid backbone. Within the hybrid backbone, a Tn6029-family transposon, identified here as Tn6029C abuts the sul1 gene in the 3´-Conserved Segment (-CS) of a class 1 integron generating a unique molecular signature that has only previously been observed in pASL01a, a small plasmid found in commensal E. coli in West Africa. From this common progenitor, independent IS26-mediated events created two novel transposons identified here as Tn6029D and Tn6222 in 2011C-3493 and 2009EL-2050 respectively. Analysis of RD1 within GI3 reveals IS26 has played a crucial role in the assembly of regions within the CRL.

Movement of IS26-associated antibiotic resistance genes occurs via a translocatable unit that includes a single IS26 and preferentially inserts adjacent to another IS26

The insertion sequence IS26 plays a key role in disseminating antibiotic resistance genes in Gram-negative bacteria, forming regions containing more than one antibiotic resistance gene that are flanked by and interspersed with copies of IS26. A model presented for a second mode of IS26 movement that explains the structure of these regions involves a translocatable unit consisting of a unique DNA segment carrying an antibiotic resistance (or other) gene and a single IS copy. Structures resembling class I transposons are generated via RecA-independent incorporation of a translocatable unit next to a second IS26 such that the ISs are in direct orientation. Repeating this process would lead to arrays of resistance genes with directly oriented copies of IS26 at each end and between each unique segment. This model requires that IS26 recognizes another IS26 as a target, and in transposition experiments, the frequency of cointegrate formation was 60-fold higher when the target plasmid contained IS26. This reaction was conservative, with no additional IS26 or target site duplication generated, and orientation specific as the IS26s in the cointegrates were always in the same orientation. Consequently, the cointegrates were identical to those formed via the known mode of IS26 movement when a target IS26 was not present. Intact transposase genes in both IS26s were required for high-frequency cointegrate formation as inactivation of either one reduced the frequency 30-fold. However, the IS26 target specificity was retained. Conversion of each residue in the DDE motif of the Tnp26 transposase also reduced the cointegration frequency.

Resistance to antibiotics belonging to several of the different classes used to treat infections is a critical problem. Multiply antibiotic-resistant bacteria usually carry large regions containing several antibiotic resistance genes, and in Gram-negative bacteria, IS26 is often seen in these clusters. A model to explain the unusual structure of regions containing multiple IS26 copies, each associated with a resistance gene, was not available, and the mechanism of their formation was unexplored. IS26-flanked structures deceptively resemble class I transposons, but this work reveals that the features of IS26 movement do not resemble those of the IS and class I transposons studied to date. IS26 uses a novel movement mechanism that defines a new family of mobile genetic elements that we have called “translocatable units.” The IS26 mechanism also explains the properties of IS257 (IS431) and IS1216, which belong to the same IS family and mobilize resistance genes in Gram-positive staphylococci and enterococci.

Tandem multiplication of the IS26-flanked amplicon with the bla(SHV-5) gene within plasmid p1658/97

The IncF plasmid p1658/97 (c. 125 kb) from Escherichia coli isolates recovered during a clonal outbreak in a hospital in Warsaw, Poland, in 1997 contains the extended-spectrum β-lactamase (ESBL) gene bla(SHV-5), originated from the Klebsiella pneumoniae chromosome. A region containing the bla(SHV-5) gene is flanked by two IS26 copies and its copy number multiplies spontaneously within p1658/97 and RecA-deficient E. coli strains. Here, we demonstrate that the amplified IS26-bla(SHV-5) units were arranged in tandems, containing up to more than 10 units, which could raise ceftazidime MICs for host strains from 4 μg mL(-1) to more than 128 μg mL(-1). Successive deletions within p1658/97, located outside the amplifiable module and encompassing even as little as c. 15% of the plasmid, blocked the amplification. Moreover, the complementing re-introduction of the deleted fragments in trans did not restore the process. Similarly, insertions of a 1-kb DNA fragment into the amplicon inhibited its self-multiplication ability. The module was able to transmit into another IS26-containing plasmid by recombination. The results prompted us to speculate that local DNA structure, especially favorable in p1658/97, might have been responsible for the IS26-bla(SHV-5) multiplication ability.

Analysis of antibiotic resistance regions in Gram-negative bacteria

Antibiotic resistance in Gram-negative bacteria is often due to the acquisition of resistance genes from a shared pool. In multiresistant isolates these genes, together with associated mobile elements, may be found in complex conglomerations on plasmids or on the chromosome. Analysis of available sequences reveals that these multiresistance regions (MRR) are modular, mosaic structures composed of different combinations of components from a limited set arranged in a limited number of ways. Components common to different MRR provide targets for homologous recombination, allowing these regions to evolve by combinatorial evolution, but our understanding of this process is far from complete. Advances in technology are leading to increasing amounts of sequence data, but currently available automated annotation methods usually focus on identifying ORFs and predicting protein function by homology. In MRR, where the genes are often well characterized, the challenge is to identify precisely which genes are present and to define the boundaries of complete and fragmented mobile elements. This review aims to summarize the types of mobile elements involved in multiresistance in Gram-negative bacteria and their associations with particular resistance genes, to describe common components of MRR and to illustrate methods for detailed analysis of these regions.

Distribution of class 1 integrons with IS26-mediated deletions in their 3'-conserved segments in Escherichia coli of human and animal origin

Class 1 integrons play a role in the emergence of multi-resistant bacteria by facilitating the recruitment of gene cassettes encoding antibiotic resistance genes. 512 E. coli strains sourced from humans (n = 202), animals (n = 304) and the environment (n = 6) were screened for the presence of the intI1 gene. In 31/79 integron positive E. coli strains, the gene cassette regions could not be PCR amplified using standard primers. DNA sequence analysis of 6 serologically diverse strains revealed atypical integrons harboured the dfrA5 cassette gene and only 24 bp of the integron 3′-conserved segment (CS) remained, due to the insertion of IS26. PCR targeting intI1 and IS26 followed by restriction fragment length polymorphism (RFLP) analysis identified the integron-dfrA5-IS26 element in 27 E. coli strains of bovine origin and 4 strains of human origin. Southern hybridization and transformation studies revealed the integron-dfrA5-IS26 gene arrangement was either chromosomally located or plasmid borne. Plasmid location in 4/9 E. coli strains and PCR linkage of Tn21 transposition genes with the intI1 gene in 20/31 strains, suggests this element is readily disseminated by horizontal transfer.

Novel insertion sequence- and transposon-mediated genetic rearrangements in genomic island SGI1 of Salmonella enterica serovar Kentucky

Salmonella genomic island 1 (SGI1) is an integrative mobilizable element that harbors a multidrug resistance (MDR) gene cluster. Since its identification in epidemic Salmonella enterica serovar Typhimurium DT104 strains, variant SGI1 MDR gene clusters conferring different MDR phenotypes have been identified in several S. enterica serovars and classified as SGI1-A to -O. A study was undertaken to characterize SGI1 from serovar Kentucky strains isolated from travelers returning from Africa. Several strains tested were found to contain the partially characterized variant SGI1-K, recently described in a serovar Kentucky strain isolated in Australia. This variant contained only one cassette array, aac(3)-Id-aadA7, and an adjacent mercury resistance module. Here, the uncharacterized part of SGI1-K was sequenced. Downstream of the mer module similar to that found in Tn21, a mosaic genetic structure was found, comprising (i) part of Tn1721 containing the tetracycline resistance genes tetR and tet(A); (ii) part of Tn5393 containing the streptomycin resistance genes strAB, IS1133, and a truncated tnpR gene; and (iii) a Tn3-like region containing the tnpR gene and the beta-lactamase bla(TEM-1) gene flanked by two IS26 elements in opposite orientations. The rightmost IS26 element was shown to be inserted into the S044 open reading frame of the SGI1 backbone. This variant MDR region was named SGI1-K1 according to the previously described variant SGI1-K. Other SGI1-K MDR regions due to different IS26 locations, inversion, and partial deletions were characterized and named SGI1-K2 to -K5. Two new SGI1 variants named SGI1-P1 and -P2 contained only the Tn3-like region comprising the beta-lactamase bla(TEM-1) gene flanked by the two IS26 elements inserted into the SGI1 backbone. Three other new variants harbored only one IS26 element inserted in place of the MDR region of SGI1 and were named SGI1-Q1 to -Q3. Thus, in serovar Kentucky, the SGI1 MDR region undergoes recombinational and insertional events of transposon and insertion sequences, resulting in a higher diversity of MDR gene clusters than previously reported and consequently a higher diversity of MDR phenotypes.

Identification of an atypical integron carrying an IS26-disrupted aadA1 gene cassette in Acinetobacter baumannii

An unusual class 1 integron was identified that carries an IS26-disrupted aadA1 gene cassette (designated as 'integron-IS26') in an imipenem-resistant Acinetobacter baumannii (IRAB) outbreak strain. DNA sequencing revealed that integron-IS26 contained two gene cassettes, the aac(6')-Im cassette and a peculiar aadA1 cassette that was disrupted by IS26 (disrupted aadA1 cassette). Southern blotting localised integron-IS26 to the chromosome. Nested polymerase chain reaction (PCR) was performed to define the frequency of integron-IS26 in five groups of bacteria. Nested PCR identified integron-IS26 in 19 (73.1%) of 26 clinical outbreak strains of IRAB, 10 (100%) of 10 IRAB isolated from environmental cultures, 3 (13.0%) of 23 imipenem-susceptible A. baumannii (ISAB) non-outbreak strains, 1 (3.6%) of 28 netilmicin- and tobramycin-resistant A. baumannii and none of the netilmicin- and tobramycin-resistant Pseudomonas aeruginosa. In conclusion, we have identified a novel class I integron that carries the aac(6')-Im cassette and an IS26-disrupted copy of aadA1 (integron-IS26) in most IRAB outbreak strains and in a few ISAB non-outbreak control strains. Integron-IS26 is located chromosomally.

Mosaic structure of p1658/97, a 125-kilobase plasmid harboring an active amplicon with the extended-spectrum beta-lactamase gene blaSHV-5

Escherichia coli isolates recovered from patients during a clonal outbreak in a Warsaw, Poland, hospital in 1997 produced different levels of an extended-spectrum beta-lactamase (ESBL) of the SHV type. The beta-lactamase hyperproduction correlated with the multiplication of ESBL gene copies within a plasmid. Here, we present the complete nucleotide sequence of plasmid p1658/97 carried by the isolates recovered during the outbreak. The plasmid is 125,491 bp and shows a mosaic structure in which all modules constituting the plasmid core are homologous to those found in plasmids F and R100 and are separated by segments of homology to other known regions (plasmid R64, Providencia rettgeri genomic island R391, Vibrio cholerae STX transposon, Klebsiella pneumoniae or E. coli chromosomes). Plasmid p1658/97 bears two replication systems, IncFII and IncFIB; we demonstrated that both are active in E. coli. The presence of an active partition system (sopABC locus) and two postsegregational killing systems (pemIK and hok/sok) indicates that the plasmid should be stably maintained in E. coli populations. The conjugative transfer is ensured by the operons of the tra and trb genes. We also demonstrate that the plasmidic segment undergoing amplification contains the blaSHV-5 gene and is homologous to a 7.9-kb fragment of the K. pneumoniae chromosome. The amplicon displays the structure of a composite transposon of type I.

IS911 partial transposition products and their processing by the Escherichia coli RecG helicase

Insertion of bacterial insertion sequence IS911 can often be directed to sequences resembling its ends. We have investigated this type of transposition and shown that it can occur via cleavage of a single end and its targeted transfer next to another end. The single end transfer (SET) events generate branched DNA molecules that contain a nicked Holliday junction and can be considered as partial transposition products. Our results indicate that these can be processed by the Escherichia coli host independently of IS911-encoded proteins. Such resolution depends on the presence of homologous DNA regions neighbouring the cross-over point in the SET molecule. Processing is often accompanied by sequence conversion between donor and target sequences, suggesting that branch migration is involved. We show that resolution is greatly reduced in a recG host. Thus, the branched DNA-specific helicase, RecG, involved in processing of potentially lethal DNA structures such as stalled replication forks, also intervenes in the resolution of partial IS911 transposition products.

Translocation of transposition-deficient (TndPKLH2-like) transposons in the natural environment: mechanistic insights from the study of adjacent DNA sequences

A family of plasmid-borne DNA fragments of different length, apparently inherited from an ancient plasmid, has been identified in the world population of environmental Acinetobacter strains. These fragments, named PPFs (parental plasmid DNA fragments), were >/=99.8 % identical to each other in the common regions, and contained in their central region a variant of an aberrant mercury-resistance transposon (Tn(d)PKLH2) that has lost its transposition genes. As a rule, recombinogenic elements were found at the breakpoints of identity between the different PPFs. Of these recombinogenic elements, a newly identified IS6 family element, a transposon, or a resolvase gene interrupted one end of the PPFs. At the opposite end, the breakpoint of some PPFs was mapped to the recombination point within, in each case, a different variant of a res site (RS2), whilst in other PPFs, this end was eroded by insertion of a newly identified IS6 family element. On the basis of DNA sequence data, possible mechanisms of translocation of defective Tn(d)PKLH2-like elements via recombination events implicating the nearby res (resolution) site and IS element are proposed.

Insertion sequences

Insertion sequences (ISs) constitute an important component of most bacterial genomes. Over 500 individual ISs have been described in the literature to date, and many more are being discovered in the ongoing prokaryotic and eukaryotic genome-sequencing projects. The last 10 years have also seen some striking advances in our understanding of the transposition process itself. Not least of these has been the development of various in vitro transposition systems for both prokaryotic and eukaryotic elements and, for several of these, a detailed understanding of the transposition process at the chemical level. This review presents a general overview of the organization and function of insertion sequences of eubacterial, archaebacterial, and eukaryotic origins with particular emphasis on bacterial elements and on different aspects of the transposition mechanism. It also attempts to provide a framework for classification of these elements by assigning them to various families or groups. A total of 443 members of the collection have been grouped in 17 families based on combinations of the following criteria: (i) similarities in genetic organization (arrangement of open reading frames); (ii) marked identities or similarities in the enzymes which mediate the transposition reactions, the recombinases/transposases (Tpases); (iii) similar features of their ends (terminal IRs); and (iv) fate of the nucleotide sequence of their target sites (generation of a direct target duplication of determined length). A brief description of the mechanism(s) involved in the mobility of individual ISs in each family and of the structure-function relationships of the individual Tpases is included where available.

Target specificity of insertion element IS30

The Escherichia coli resident mobile element IS30 has pronounced target specificity. Upon transposition, the element frequently inserts exactly into the same position of a preferred target sequence. Insertion sites in phages, plasmids and in the genome of E. coli are characterized by an exceptionally long palindromic consensus sequence that provides strong specificity for IS30 insertions, despite a relatively high level of degeneracy. This 24-bp-long region alone determines the attractiveness of the target DNA and the exact position of IS30 insertion. The divergence of a target site from the consensus and the occurrence of 'non-permitted' bases in certain positions influence the target activity. Differences in attractiveness are emphasized if two targets are present in the same replicon, as was demonstrated by quantitative analysis. In a system of competitive targets, the oligonucleotide sequence representing the consensus of genomic IS30 insertion sites proved to be the most efficient target. Having compared the known insertion sites, we suppose that IS30-like target specificity, which may represent an alternative strategy in target selection among mobile elements, is characteristic of the insertion sequences IS3, IS6 and IS21, too.

Terminal inverted repeats of insertion sequence IS30 serve as targets for transposition

In the present study, we demonstrate that the terminal inverted repeats of the Escherichia coli insertion sequence IS30 are functional target sites for the transposition of the (IS30)2 dimer, which represents an intermediate structure in the transposition of IS30. Comparative analysis of various target regions revealed that the left and right ends differ in their "attractivity." In our experiments, the joined left and right ends, i.e., the (IS30)2 intermediate structure, was found to be the most preferred target. It was also shown that flanking sequences can influence the target activity of the terminal repeats. The functional part of the target region was localized in the inverted repeats by means of mutational analysis, and it corresponds to the binding site of IS30 transposase. Insertion of 1 bp into the right inverted repeat resulted in unusual target duplication accompanied by gene conversion. The choice of the terminal inverted repeats as targets in transposition leads to the reconstruction of the (IS30)2 structure, which may induce a cascade of further rearrangements. Therefore, this process can play a role in the evolution of the genome.

The non-random pattern of insertion of IS2 into the hemB gene of Escherichia coli

The hemB gene of Escherichia coli has been identified as a hot spot for the insertion of the transposable element IS2. The insertional specificity of IS2 is still unclear. This study reports on the attempt to sequence a statistically significant number of insertions in hemB, in order to determine whether there might be a basis for future studies to determine a molecular basis of IS2 insertional specificity. The results indicate that IS2 inserts in a non-random manner into a 240 bp segment at the 5' end of the gene (region I). Twenty-one of 24 insertions occurred in region I. Three insertions have been identified in the two middle 250 bp segments of the 975 bp gene, and none in the 3' terminal segment. A seventeen bp sequence showing 88.2% identity with a segment of IS2, 221 bp from the 3' terminus has been identified in region I. Four instances of repeated insertion between the same pair of nucleotides have been observed at four different sites.

Nucleotide sequence and characterization of a new insertion element, IS240, from Bacillus thuringiensis israelensis

The nucleotide sequence of two repeated sequences (RS) in opposite orientations flanking the 125-kDa toxin gene of Bacillus thuringiensis israelensis (C. Bourgouin et al., J. Bacteriol. 170, 3575-3583, 1988) is reported in this paper. The analysis of these sequences indicates that these two RS display characteristic features of bacterial insertion sequences (IS) and are therefore referred to as IS240. IS240 B is 865 bp long and has two perfect terminal-inverted repeats of 16 bp; IS240 A is 99% identical to IS240 B. A long open reading frame encoding a polypeptide of 235 amino acids spans almost the entire sequence of both IS240 elements. Both the sequence of the inverted repeats and the putative transposases are homologous to IS26 of Proteus vulgaris, IS15-delta of Salmonella panama, IS431 of Staphylococcus aureus, and ISS1 of Streptococcus lactis.

IS431, a staphylococcal insertion sequence-like element related to IS26 from Proteus vulgaris

We present the nucleotide sequence of IS431, a new staphylococcal insertion sequence-like element flanking the mercury-resistance determinant of pI524 and associated with the methicillin-resistance determinant. IS431 left is 800 bp long and has a perfect terminal inverted repeat (IR) of 22 bp; IS431 right is 786 bp long and has a terminal IR homologous to the IR of IS431 left except that the terminal 8 bp are absent. Both IRs share a 10-bp homology with the IR of IS26 from Proteus vulgaris. No directly repeated sequences were detected immediately adjacent to the IRs. An open reading frame (ORF) of 675 bp spans most of the IS431 sequence. Its deduced amino acid (aa) sequence shows 40% homology to the 234-aa-long putative transposase coded by ORFI of IS26.

A pathway for the evolution of the plasmid NTP16 involving the novel kanamycin resistance transposon Tn4352

The kanamycin resistance determinant of the drug resistance plasmid NTP16 has been characterized by DNA sequencing and has been shown to possess all of the structural features of a transposable element. It is made up of a 1040-bp central region encoding a protein identical to the aminoglycoside 3'-phosphotransferase of Tn903, flanked by direct repeats of an element identical to IS26. This novel transposon has been designated Tn4352. Analysis of the host sequences flanking the transposon reveal that they are derived from a Tn3-like element, and contain no 8 base pair target size duplications which are normally created by the insertion of IS26-like elements. Comparison to the Tn3 sequence shows that the flanking sequences are noncontiguous within Tn3, with the clear implication that NTP16 has evolved from a similar plasmid encoding only ampicillin resistance (presumably NTP1) by the insertion of Tn4352 into the Tn3-like element, followed by a substantial deletion. The sequence analysis suggests that the initial insertion was into the tnpR gene of the ampicillin transposon, followed by a deletion extending to a specific site within tnpA.