Synthesis of temperature-sensitive submicron-size composite polymer particles

pH-Responsive Capsule Polymer Particles Prepared by Interfacial Photo-Cross-Linking: Effect of the Alkyl Chain Length of the pH-Responsive Monomer

pH-responsive capsule particles have immense potential for use in various advanced fields, such as microreactors and drug delivery. Moreover, the interfacial photo-cross-linking of spherical polymer particles is a promising strategy to create various functional capsule particles. In this study, pH-responsive capsule polymer particles were prepared by interfacial photo-cross-linking with photo-reactive polymers possessing different pH-responsive monomer units of different alkyl chain lengths, namely, 2-dimethylaminoethyl methacrylate, 2-diethylaminoethyl methacrylate, and 2-diisopropylaminoethyl methacrylate. Using these different pH-responsive monomers, regulation of the controlled release properties of pH-responsive capsule particles was achieved. All capsule particles prepared from these three different polymers released encapsulated molecules under acidic conditions; however, more acidic conditions were necessary for releasing encapsulated molecules with the increasing alkyl chain length. The afforded results indicated that pH-responsive monomers of different alkyl chain lengths could be successfully employed to regulate the pH-responsive controlled release property of the capsule particles prepared by interfacial photo-cross-linking.

Mesoporous magnetic silica particles modified with stimuli-responsive P(NIPAM-DMA) valve for controlled loading and release of biologically active molecules

Mesoporous magnetic silica particles bearing a stimuli-responsive polymer valve were prepared and their performance as a microcapsule was evaluated. In this study, first, mesoporous magnetic iron oxide (Fe3O4) particles were prepared by a solvothermal method. Then, the magnetic particles were coated with silica and functionalized with vinyl groups using 3-(trimethoxysilyl)-propyl methacrylate (MPS). Subsequently, the Fe3O4/SiO2 composite particles grafted with MPS were used to carry out the seeded precipitation copolymerization of N-isopropylacrylamide (NIPAM) and 2,2-dimethylaminoethyl methacrylate (DMA). Here N,N'-methylenebisacrylamide (MBA) was used as a cross-linker. Brunauer-Emmett-Teller (BET) surface analysis suggested that the mesoporous structure was retained in the final Fe3O4/SiO2/P(NIPAM-DMA-MBA) composite hydrogel particles. The prepared Fe3O4/SiO2/P(NIPAM-DMA-MBA) composite hydrogel microspheres exhibited a pH-dependent volume phase transition. At lower pH values (<7), the inclusion of DMA shifted the volume phase transition to higher temperature because of the protonation of the tertiary amine groups. The composite hydrogel particles possessed a high saturation magnetization (51 emu g-1) and moved under the influence of an external magnetic field. The loading-release behaviour of these biologically active molecules suggested that a portion of the encapsulated guest molecules was released at a temperature below the lower critical solution temperature, LCST (<35 °C).

Preparation of stimuli-responsive "mushroom-like" janus polymer particles as particulate surfactant by site-selective surface-initiated AGET ATRP in aqueous dispersed systems

Micrometer-sized, monodisperse, "mushroom-like" Janus poly(methyl methacrylate)/poly(styrene-2-(2-bromoisobutyryloxy)ethyl methacrylate)-graft-poly(2-(dimethyl amino)ethyl methacrylate) (PMMA/P(S-BIEM)-g-PDM) particles were successfully synthesized by site-selective surface-initiated activator generated by electron transfer for atom transfer radical polymerization in aqueous dispersed systems with spherical PMMA/P(S-BIEM) composite particles having controlled morphologies prepared using the solvent evaporation method. The anisotropic nonspherical shape of the obtained particles was controlled by changing the percentage of the surface area occupied by localized initiation sites (bromine group) at the surface of the PMMA/P(S-BIEM) composite particles with different P(S-BIEM) contents. Grafted PDM layer formed at the surface (contacting with water) of the P(S-BIEM) phase reversibly exhibited the volume phase transition in response to temperature and pH, which gave different nonspherical shapes ("open" or "closed" mushroom-cap). On the basis of such dual stimuli-responsive properties, the nonspherical particles effectively operated as particulate surfactant for Pickering emulsion, resulting in a stable 1-octanol-in-water emulsion at optimum temperature and pH value, and the Pickering emulsion could be easily unstabilized quickly by controlling them.

Dual stimuli-responsive "mushroom-like" Janus polymer particles as particulate surfactants

"Mushroom-like" Janus poly(methyl methacrylate) (PMMA)/poly(styrene-2-(2-bromoisobutyryloxy)ethyl methacrylate)-graft-poly(2-(dimethylamino)ethyl methacrylate) (PDM) particles synthesized in our previous report were applied as particulate surfactants. The PDM moiety at the one side of the Janus particles reversibly exhibited the volume phase transition in response to pH and temperature in an aqueous medium; that is, the surface property of the Janus particles comprising both PDM and PMMA reversibly changed between amphiphilic and hydrophobic based on the nature of PDM. Consequently, 1-octanol-in-water emulsion droplets stabilized by the amphiphilic Janus particles coalesced in the alkaline region and at 60 degrees C around neutral pH because of desorption of the hydrophobized Janus particles from the interface to the oil phase.

Biostructure-like surfaces with thermally responsive wettability prepared by temperature-induced phase separation micromolding

We present a very efficient and convenient approach to obtain smart biosurfaces by directly replicating biological surface structures. It is realized by a two-step replication process combining regular replica molding and temperature-induced phase separation micromolding (PSmicroM). The negative replicas of biological surface structures using poly(dimethylsiloxane) as the replication material are durable molds for further replication. The positive replicas of biological surface structures are obtained by the second step replication using PSmicroM of poly(N-isopropylacrylamide) aqueous solution, which can be easily carried out just by adjusting temperature. With cold water as good solvent and hot water as nonsolvent, an environmentally friendly PSmicroM process is successfully achieved, and organic solvents for PSmicroM are completely avoided. Our study has demonstrated that the micro- and nanostructures of the lotus leaf and rice leaf can be well replicated using this two-step replication process, and the replicated artificial lotus leaf and rice leaf using poly(N-isopropylacrylamide) exhibit good thermally responsive wettability.

Preparation of "mushroom-like" Janus particles by site-selective surface-initiated atom transfer radical polymerization in aqueous dispersed systems

A versatile approach for the preparation of micrometer-sized, monodisperse, "mushroom-like" Janus polymer particles in aqueous dispersed systems is proposed. The synthetic methodology of the Janus particles consists of the following two steps. The first step is the preparation of spherical poly(methyl methacrylate) (PMMA)/poly(styrene-2-(2-bromoisobutyryloxy)ethyl methacrylate) (P(S-BIEM)) Janus particles based on the internal phase separation induced by solvent evaporation from the solvent droplets dissolving the polymers. The second step is surface-initiated atom transfer radical polymerization (ATRP) of 2-(dimethylamino)ethyl methacrylate (DM) using the Janus particles with ATRP initiator groups at one side of the surface as macroinitiator. As a consequence, mushroom-like PMMA/P(S-BIEM)-graft-poly(DM) Janus particles were prepared, which had pH-responsive property.

Preparation of micrometer-sized, monodisperse "janus" composite polymer particles having temperature-sensitive polymer brushes at half of the surface by seeded atom transfer radical polymerization

Micrometer-sized, monodisperse polystyrene (PS)/poly[methyl methacrylate-(chloromethyl)styrene] [P(MMA-CMS)] composite particles having hemispherical structure were prepared by solvent evaporation from toluene droplets containing dissolved PS and P(MMA-CMS) dispersed in aqueous solution, which had been prepared using the membrane method. The formation of hemispherical ("Janus") morphology by phase separation between the PS and the P(MMA-CMS) was confirmed by both optical and electron microscopy. Atom transfer radical polymerization (ATRP) of 2-(dimethylamino)ethyl methacrylate (DM) was subsequently carried out in the presence of hemispherical PS/P(MMA-CMS) composite particles in an aqueous dispersed system. After polymerization, the morphology of the particles changed from spherical to "mushroom" shape as observed by scanning electron microscopy, indicating that DM polymerized inside or on the surface of half [P(MMA-CMS) phase] of the particles. 1H NMR spectra were consistent with chloromethyl functional groups in P(MMA-CMS) operating as ATRP initiators in the DM polymerization.

Synthesis of polystyrene/poly[2-(dimethylamino)ethyl methacrylate-stat-ethylene glycol dimethacrylate] core-shell latex particles by seeded emulsion polymerization and their application as stimulus-responsive particulate emulsifiers for oil-in-water emulsions

Surfactant-stabilized polystyrene (PS) latex particles with a mean hydrodynamic diameter of 155 nm were prepared by aqueous emulsion polymerization using 2,2'-azobis(2-amidinopropane) hydrochloride as a cationic radical initiator. Seeded aqueous emulsion copolymerizations of 2-(dimethylamino)ethyl methacrylate (DMA) and ethylene glycol dimethacrylate (EGDMA) were conducted in the presence of these PS particles to produce two batches of colloidally stable core-shell latex particles, in which the shell comprised a cross-linked P(DMA-stat-EGDMA) overlayer. Both the PS and PS/P(DMA-stat-EGDMA) latexes were characterized in terms of their particle size, morphology, and composition using dynamic light scattering, electron microscopy, and FT-IR spectroscopy, respectively. Using the PS/P(DMA-stat-EGDMA) latex particles as a pH-responsive particulate ('Pickering'-type) emulsifier, polydisperse n-dodecane-in-water emulsions were prepared at pH 8 that could be partially broken (demulsified) on lowering the solution pH to 3. These emulsions were characterized in terms of their emulsion type, mean droplet diameter, and morphology using electrical conductivity and Mastersizer measurements, optical microscopy, and scanning electron microscopy (using critical point drying for sample preparation).