Combining immunoassays with chromatographic and electrophoretic separation techniques ? a review

Development of on-line high performance liquid chromatography (HPLC)-biochemical detection methods as tools in the identification of bioactives

Biochemical detection (BCD) methods are commonly used to screen plant extracts for specific biological activities in batch assays. Traditionally, bioactives in the most active extracts were identified through time-consuming bio-assay guided fractionation until single active compounds could be isolated. Not only are isolation procedures often tedious, but they could also lead to artifact formation. On-line coupling of BCD assays to high performance liquid chromatography (HPLC) is gaining ground as a high resolution screening technique to overcome problems associated with pre-isolation by measuring the effects of compounds post-column directly after separation. To date, several on-line HPLC-BCD assays, applied to whole plant extracts and mixtures, have been published. In this review the focus will fall on enzyme-based, receptor-based and antioxidant assays.

Labeling strategies for bioassays

Different labeling strategies for enzymatic assays and immunoassays are reviewed. Techniques which make use of direct detection of a label, e.g. radioimmunoassays, are discussed, as are techniques in which the label is associated with inherent signal amplification. Examples of the latter, e.g. enzyme-linked immunosorbent assays or nanoparticle-label based assays, are presented. Coupling of the bioassays to chromatographic separations adds selectivity but renders the assays more difficult to apply. The advantages and drawbacks of the different analytical principles, including future perspectives, are discussed and compared. Selected applications from clinical, pharmaceutical, and environmental analysis are provided as examples.

Sample preparation for peptides and proteins in biological matrices prior to liquid chromatography and capillary zone electrophoresis

The determination of peptides and proteins in a biological matrix normally includes a sample-preparation step to obtain a sample that can be injected into a separation system in such a way that peptides and proteins of interest can be determined qualitatively and/or quantitatively. This can be a rather challenging, labourious and/or time-consuming process. The extract obtained after sample preparation is further separated using a compatible separation system. Liquid chromatography (LC) is the generally applied technique for this purpose, but capillary zone electrophoresis (CZE) is an alternative, providing fast, versatile and efficient separations. In this review, the recent developments in the combination of sample-preparation procedures with LC and CZE, for the determination of peptides and proteins, will be discussed. Emphasis will be on purification from and determination in complex biological matrices (plasma, cell lysates, etc.) of these compounds and little attention will be paid to the proteomics area. Additional focus will be put on sample-preparation conditions, which can be 'hard' or 'soft', and on selectivity issues. Selectivity issues will be addressed in combination with the used separation technique and a comparison between LC and CZE will be made.

Multidimensional biochemical detection of microcystins in liquid chromatography

The coupling of antibody-, receptor-, or enzyme-based inhibition assays postcolumn to chromatographic systems provides biological detectors with extraordinary high sensitivity and specificity. Three monoclonal antibodies (MC10E7, AD4G2, M8H5) directed against microcystins and protein phosphatase 1 (PP1) were used as off-line detectors for the HPLC separation of microcystins and nodularin in comparison to UV detection. For HPLC/ELISA coupling using antibody MC10E7, a detection limit of 0.04 ng microcystin-LR was achieved. The provisional guideline value for microcystin-LR (1 microg/L, WHO) could be monitored without prior sample concentration, in contrast to UV detection. Quantification of microcystin-LR and two cross-reactants was demonstrated. Furthermore, cross-reactivity or enzyme inhibition of new microcystins, only available in small amounts, can be determined by this method. Using a cyanobacterial extract, HPLC/ELISA coupling was compared to HPLC/UV and electrospray ionization mass spectrometry (ESI-TOFMS).

Electrokinetically driven microfluidic chips with surface-modified chambers for heterogeneous immunoassays

This article presents the first example of a microfluidic chip for heterogeneous bioassays using a locally immobilized biospecific layer and operated electrokinetically. The reaction chamber has picoliter dimensions and is integrated into a network of microchannels etched in glass. The high affinity of protein A (PA) for rabbit immunoglobulin G (rIgG) was exploited for chip testing, with PA being immobilized on microchannel walls and fluorescently labeled (Cy5) rIgG serving as sample. It was possible to operate the chip in an immunoaffinity chromatographic manner, using electrokinetically pumped solutions. Concentration of antibody from dilute solution onto the solid phase was demonstrated, with signal gains of approximately 30 possible. A dose-response curve for Cy5-rIgG was obtained for concentrations down to 50 nM, for an incubation time of 200 s. The flexibility of chip layout was demonstrated for competitive immunoassay of rIgG, using both a combined sample/tracer incubation and sequential addition of these solutions. With assay times generally below 5 min for this unoptimized device, the microfluidic approach described shows great potential for many high-throughput screening applications.

Coupling immunoassays with chromatographic separation techniques

Coupling immunoassays with HPLC separation techniques is becoming increasingly useful in the analysis of biological and nonbiological samples of both large and small molecules. This is because it provides both sensitivity and selectivity for molecular analysis at relatively low cost, low maintenance and with excellent potential for automation. This paper reviews application of this hyphenated approach both in the pre-column immunoextraction and post-column immunodetection modes. Systems in which immunoassays are interfaced to chromatographic separations in order to separate bound and free fractions of the immunoassay will not be included since these systems do not provide the enhanced selectivity common to hyphenated systems. Post-column immunodetection is based on various immunoassay formats such as direct detection, one-site, competitive and sandwich immunoassays. Homogeneous immunodetectors are more convenient than heterogeneous immunodectors since there are no separation and column regeneration steps involved in homogeneous immunoassays. On the other hand, heterogeneous immunoassays are generally more sensitive than homogeneous immunoassays since interfering substances are removed prior to immunodetection. Advantages and limitations for the various approaches will be discussed.

A capillary electrophoresis laser-induced fluorescence method for analysis of potato glycoalkaloids based on a solution-phase immunoassay. 1. Separation and quantification of immunoassay products

Solution-phase immunoassays are typically faster and more precise than ELISAs. This research developed a solution-phase for the immunoassay of potato glycoalkaloids (GAs) based on quantification by capillary electrophoresis (CE) with laser-induced fluorescence (LIF) detection. Solanidine coupled to 4'-(aminomethyl)fluorescein and a polyclonal antibody solution were used as the immunoreagents. Unbound fluorescent solanidine was detected by CE-LIF (excitation 488 nm, emission 520 nm). Optimum resolution of immunoassay products was achieved with a buffer consisting of 50 mM phosphate, 10% (v/v) methanol, and 1.5 mM SDS, pH 7.5. A plot of signal vs log [GA] produced a sigmoidal curve typical of immunoassays. Analysis of extracts of sprouted Yukon Gold potato tubers and nonsprouted Yukon Gold tubers resulted in total [GA] of 98 microg/g (RSD 9%) and 55 microg/g (RSD 9%), respectively. The findings indicated that CE-LIF coupled with a solution-phase immunoassay can be used to quantify total GA in potatoes.

Post-column reaction detection based on fluorescence energy transfer in the far red spectral region

Post-column reaction detection may result in enhanced analytical sensitivity and selectivity. This paper describes an on-line HPLC with post-column fluorescence energy transfer assay using biotin as a model analyte. Biotin labeled with R-phycoerythrin was used as the donor labeled ligand and streptavidin labeled with an indodicarbocyanine dye (Cy5), the acceptor labeled binder protein. The use of these labels provided a detection wavelength in the far red spectral region which is more selective for biological samples. In the on-line system, biotin was injected into the HPLC system followed by Cy5 labeled streptavidin and R-phycoerythrin labeled biotin, post-column. The mixture was incubated on-line in an open tubular reactor coil maintained at 37 degrees C. The measured response was the sensitized emission of Cy5 due to fluorescence energy transfer from R-phycoerythrin labeled biotin measured at 670 nm. Excitation was at 488 nm, which provided a large Stokes shift for reduction of scatter interference. The system was optimized with regard to the post-column reagents to obtain the minimum detectable concentration while maintaining appropriate dynamic range for the analysis of biotin. Biotin spiked in 0.01 M phosphate buffer, pH 7.4, showed a dynamic range of 304.0 pg/ml-122.20 ng/ml with a correlation coefficient of 0.993. The limit of detection for this assay was 304.0 pg/ml. The precision calculated at the blank (n = 6) was 4.14%.

Capillary electrophoresis of peptides

This article gives a review of the recent developments in capillary electrophoresis (CE) of peptides. New approaches to the theoretical description of electromigration behavior of peptides are described, and methodological aspects of CE separations of peptides such as selection of separation conditions, sample treatment, suppression of peptide adsorption to the capillary wall and specificities of CE separation modes are discussed. Progress in application of high performance detection schemes, namely laser-induced fluorescence and mass spectrometry, in peptide separations by CE is presented. Applications of different CE techniques, zone electrophoresis, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography and electrochromatography to peptide analysis, preparation and physicochemical characterization are demonstrated.