MAGIC-LC/FT-IR spectrometry

Electrospray Film Deposition for Solvent-Elimination Infrared Spectroscopy

The application of electrospray (ES) for quantitative transfer of analytes from solution to an internal reflection element for analysis by attenuated total reflection Fourier transform infrared (ATR FT-IR) spectroscopy has been developed in this work. The ES ATR FT-IR method is evaluated with non-volatile and semi-volatile organic and inorganic compounds dissolved in pure organic solvents or organics in a mixture with water. The technique demonstrates the capability for rapid solvent evaporation from dilute solutions, facilitating the creation of thin films that allow ATR FT-IR to generate transmission-mode-like spectra. Electrospray ATR FT-IR with multiple reflections displays a linear response ( R² = 0.95-0.99) in absorbance with the deposited mass and instrumental detection limit < 100 ng, which demonstrates potential for quantitative applications. The method is applicable when crystalline substances are present, even though the formation of particles restricts the upper limit of mass loadings relative to substances forming homogeneous films. In addition to the solvent, semi-volatile compounds can evaporate during the ES process; the magnitude of losses will depend on solution composition and temperature.

Fourier transform infrared spectroscopy with a sample deposition interface as a quantitative detector in size-exclusion chromatography

The use of a state-of-the-art commercial solvent-elimination interface for liquid chromatography-infrared spectroscopy is discussed from the perspective of quantitative analysis. The effect of eluent flow-rate is investigated with respect to the homogeneity of the deposit and the trace width along the deposition trace. Low flow-rates (50 microl/min or less) turn out to be favorable for obtaining a good trace and a high sensitivity. The trace width decreased from 2.20 to 1.13 mm when the flow-rate was reduced from 500 to 25 microl/min. Preservation of chromatographic detail during deposition was evaluated at different substrate moving speeds. The additional (extra-column) band broadening that is inherent to nebulizer-deposition interfaces, causes a loss in resolution in size-exclusion chromatography (SEC)-Fourier transform infrared (FTIR) spectroscopy in comparison with SEC-UV. The repeatability of the deposition is evaluated by SEC-FTIR analyses of polystyrene standards (peak molar-masses: 1250-2,950 000 g/mol) and the RSD is found to range from 3.2 to 5.8% in response and from 0.21 to 0.47% in retention time.

Liquid chromatography-Fourier-transform infrared spectrometry

Over the past years the coupling of liquid chromatography (LC) and Fourier-transform infrared spectrometry (FT-IR) has been pursued primarily to achieve specific detection and/or identification of sample constituents. Two approaches can be discerned in the combination of LC and FT-IR. The first and simpler approach is to use a flow cell through which the effluent from the LC column is passed while the IR spectra are continuously recorded. The second approach involves elimination of the LC solvent prior to IR detection using an interface which evaporates the eluent and deposits the analytes onto a substrate. This paper provides a general overview of flow-cell based IR detection and briefly discusses early solvent-elimination interfaces for LC-FT-IR. A more comprehensive description is given of interface systems which use spraying to induce rapid eluent evaporation, and which basically represent the state-of-the-art in LC-FT-IR. Finally, the interface systems suitable for reversed-phase LC are summarized and the perspectives of LC-FT-IR are discussed. The overview indicates that flow-cell LC-FT-IR has rather poor detection limits but can be useful for the specific and quantitative detection of major constituents of mixtures. Solvent-elimination techniques, on the other hand, provide much better sensitivity and enhanced spectral quality which is essential when unambiguous identification of low-level constituents is required.