Amphoteric polystyrene latex colloids: polymerization pathway and the control of particle size and potential

Physical Characterization of Halofantrine-Encapsulated Fat Nanoemulsions

We report the colloidal characterization of halofantrine (Hf)-laden soybean oil fat emulsions. Hf increased the zeta potential, at all pH values, of the fat emulsions. Concomitant with this, the isoelectric point (i.e.p.) of the emulsion increased to higher pH values. The emulsion was destabilized by a small amount of Hf; interestingly, however, this was ameliorated by increasing the amount of Hf. The particle size and polydispersity of the fat emulsion reflected this with a small Hf concentration resulting in a significant increase in both particle size and polydispersity, but less so as the Hf concentration was increased. Emulsions lost stability as the pH approached the i.e.p. and this effect was greatest for the small Hf concentration emulsions. Cryogenic transmission electron microscopy showed the presence of beading or string-like behavior leading to gross distortions of the spherical shape for highly unstable emulsions. We conclude that to maintain good stability for Hf-laden soybean oil emulsions, the pH of the emulsion should be kept away from its i.e.p, and also that the drug concentration should be maintained at a relatively high value.

Colloids with continuously tunable surface charge

In this paper, we present a robust way to tune the surface potential of polystyrene colloids without changing the pH, ionic strength, etc. The colloids are composed of a cross-linked polystyrene core and a cross-linked vinylbenzyl chloride layer. Besides the chlorine groups, the particle surface contains sulfate/sulfonate groups (arising from the polymerization initiators) that provide a negative surface potential. Performing a Menschutkin reaction on the surface chlorine groups with tertiary amines allows us to introduce quaternary, positively charged amines. The overall charge on the particles is then determined by the ratio between the sulfate/sulfonate moieties and the quaternary amines. Using this process, we were able to invert the charge in a continuous manner without losing colloidal stability upon passing the isoelectric point. The straightforward reaction mechanism together with the fact that the reaction could be quenched rapidly resulted in a colloidal system in which the ζ potential can be tuned between -80 and 45 mV. As proof of principle, the positively charged particles were used in heterocoagulation experiments with nanometer- and micrometer-sized negatively charged silica particles to create geometrically well-defined colloidal (nano) clusters.

Ultrathin suspended nanopores with surface plasmon resonance fabricated by combined colloidal lithography and film transfer

Suspended plasmonic nanopores in ultrathin film layers were fabricated through a simple and widely applicable method combining colloidal lithography and thin film transfer, which allows mass production of short-range ordered nanopore arrays on a large scale. By this combined method, mechanically stable and flexible free-standing nanopore membranes with a thickness down to 15-30 nm were produced. The plasmon resonances of the ultrathin plasmonic nanopores fabricated in AlN/Au/AlN trilayer and single layer Au membranes were tuned to lie in the vis-NIR wavelength range by properly designing their dimensions. The optical responses to the refractive index changes were tested and applied to adlayer sensing. The trilayer nanopore membrane showed a unique property to support water only on one side of the membrane, which was confirmed by the resonance shift and comparison with numerical simulation. Pore size reduction down to 10 nm can be achieved through additional material deposition. The filtering function of such pore-size-reduced conical shaped nanofunnels has also been demonstrated. The presented nanopore fabrication method offers new platforms for ultrathin nanopore sensing or filtering devices with controlled pore-size and optical properties. The film transfer technique employed in this work would enable the transformation of any substrate-based nanostructures to free-standing membrane based devices without complicated multiple etching processes.

Characterization and antibacterial properties of N-halamine-derivatized cross-linked polymethacrylamide nanoparticles

N-halamine-derivatized cross-linked polymethacrylamide nanoparticles with sizes ranging between 18 ± 2.0 and 460 ± 60 nm were prepared via surfactant-free dispersion co-polymerization of methacrylamide (MAA) and the cross-linking monomer N,N-methylenebisacrylamide (MBAA) in an aqueous continuous phase, followed by a chlorination process using sodium hypochlorite. The effect of various polymerization parameters (monomer concentration, initiator type and concentration, polymerization duration, polymerization temperature, and the weight ratio [MBAA]/[MAA]) on the size and size distribution of the produced cross-linked P(MAA-MBAA) nanoparticles was elucidated. The effect of various chlorination parameters (hypochlorite concentration, chlorination period and temperature) on the bound oxidative chlorine atom (Cl) content of the P(MAA-MBAA) nanoparticles was also investigated. The bactericidal activity of these chloramine-derivatized nanoparticles was tested against two common bacterial pathogens (Escherichia coli and Staphylococcus aureus), and they were found to be highly potent. Furthermore, these nanoparticles also exerted their antimicrobial activity against multi-drug resistant (MDR) bacteria, further demonstrating their efficacy.

Synthesis of amphoteric polystyrene particles using mixed initiators

The synthesis of amphoteric polystyrene latex particles, using a mixture of cationic (amidinium based) and anionic (carboxylic acid based) initiators in a surfactant-free emulsion polymerization reaction is investigated; this extends work described in an earlier paper by Bolt et al. Electrophoretic mobility measurements show the effect of the initiator concentration ratio on the isoelectric point (IEP) of the particles. A good correlation with theoretical predictions is obtained. Particle size and polydispersity are determined as a function of the lag time between the addition of each initiator. An increase in particle size and polydispersity is observed at short lag times. It is shown that this is due to the ratio of the cationic to anionic surface charge approaching unity during the reaction. At long lag times an increase in polydispersity may occur due to late-stage, secondary nucleation upon addition of the second initiator. Increasing the reaction pH to reduce the degree of ionization of the cationic initiator greatly reduces the polydispersity and has a significant effect on the IEP of the particles. This effect is ascribed to the burial of a fraction of the neutral amidine groups below the particle surface due to their increased solubility in the monomer. Slow addition of the second initiator was found to reduce the polydispersity of the particles, while maintaining an IEP value consistent with that expected for the ratio of initiators added.