Determination of size of small particles by light scattering. experiments on ludox colloidal silica

Spectroscopic and Hydrodynamic Characterisation of DNA-Linked Gold Nanoparticle Dimers in Solution using Two-Photon Photoluminescence

Two-photon photoluminescence (TPPL) emission spectra of DNA-gold nanoparticle (AuNP) monoconjugates and the corresponding DNA-linked AuNP dimers are obtained by photon time-of-flight spectroscopy. This technique is combined with two-photon photoluminescence fluctuation correlation spectroscopy (TPPL-FCS) to simultaneously monitor the optical and hydrodynamic behaviour of these nano-assemblies in solution, with single-particle sensitivity and microsecond temporal resolution. In this study, the AuNPs have an average core diameter of 12 nm, which renders their dark-field plasmonic light scattering too weak for single-particle imaging. Moreover, as a result of the lack of plasmonic coupling in the dimers, the optical extinction, scattering and photoluminescence spectra of the DNA-AuNP complexes are not sufficiently different to distinguish between monomers and dimers. The use of TPPL-FCS successfully addresses these bottlenecks and enables the distinction between AuNP monomers and AuNP dimers in solution by measurement of their hydrodynamic rotational and translational diffusion.

Optical extinction and scattering cross sections of plasmonic nanoparticle dimers in aqueous suspension

Absolute extinction and scattering cross sections for gold nanoparticle dimers were determined experimentally using a chemometric approach involving singular-value decomposition of the extinction and scattering spectra of slowly aggregating gold nanospheres in aqueous suspension. Quantitative spectroscopic data on plasmonic nanoparticle assemblies in liquid suspension are rare, in particular for particles larger than 40 nm, and in this work we demonstrate how such data can be obtained directly from the aggregating suspension. Our method can analyse, non invasively, the evolution of several sub-populations of nanoparticle assemblies. It may be applied to other self-assembling nanoparticle systems with an evolving optical response. The colloidal systems studied here are based on 20, 50 and 80 nm gold nanospheres in aqueous solutions containing sodium lipoate. In these systems, the reversible dimerisation process can be controlled using pH and ionic strength, and this control is rationalised in terms of DLVO theory. The dimers were identified in suspension by their translational and rotational diffusion through scattering correlation spectroscopy. Moreover, their gigadalton molecular weight was measured using electrospray charge-detection mass spectrometry, demonstrating that mass spectrometry can be used to study nanoparticles assemblies of very high molecular mass. The extinction and scattering cross sections calculated in the discrete-dipole approximation (DDA) agree very well with those obtained experimentally using our approach.

Water-Dispersible Silica-Polyelectrolyte Nanocomposites Prepared via Acid-Triggered Polycondensation of Silicic Acid and Directed by Polycations

The present work describes the acid-triggered condensation of silicic acid, Si(OH)₄, as directed by selected polycations in aqueous solution in the pH range of 6.5⁻8.0 at room temperature, without the use of additional solvents or surfactants. This process results in the formation of silica-polyelectrolyte (S-PE) nanocomposites in the form of precipitate or water-dispersible particles. The mean hydrodynamic diameter (d_h) of size distributions of the prepared water-dispersible S-PE composites is presented as a function of the solution pH at which the composite formation was achieved. Poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) and block copolymers of DMAEMA and oligo(ethylene glycol) methyl ether methacrylate (OEGMA) were used as weak polyelectrolytes in S-PE composite formation. The activity of the strong polyelectrolytes poly(methacryloxyethyl trimethylammonium iodide) (PMOTAI) and PMOTAI-b-POEGMA in S-PE formation is also examined. The effect of polyelectrolyte strength and the OEGMA block on the formation of the S-PE composites is assessed with respect to the S-PE composites prepared using the PDMAEMA homopolymer. In the presence of the PDMAEMA₆₀ homopolymer (M_w = 9400 g/mol), the size of the dispersible S-PE composites increases with solution pH in the range pH 6.6⁻8.1, from d_h = 30 nm to d_h = 800 nm. S-PDMAEMA₆₀ prepared at pH 7.8 contained 66% silica by mass (TGA). The increase in dispersible S-PE particle size is diminished when directed by PDMAEMA₃₀₀ (M_w = 47,000 g/mol), reaching a maximum of d_h = 75 nm. S-PE composites formed using PDMAEMA-b-POEGMA remain in the range d_h = 20⁻30 nm across this same pH regime. Precipitated S-PE composites were obtained as spheres of up to 200 nm in diameter (SEM) and up to 65% mass content of silica (TGA). The conditions of pH for the preparation of dispersible and precipitate S-PE nanocomposites, as directed by the five selected polyelectrolytes PDMAEMA₆₀, PDMAEMA₃₀₀, PMOTAI₆₀, PDMAEMA₆₀-b-POEGMA₃₈ and PMOTAI₆₀-b-POEGMA₃₈ is summarized.

Protein adsorption induced bridging flocculation: the dominant entropic pathway for nano-bio complexation

Lysozyme-silica interactions and the resulting complexation were investigated through adsorption isotherms, dynamic and electrophoretic light scattering, circular dichroism (CD), and isothermal titration calorimetry (ITC). A thermodynamic analysis of ITC data revealed the existence of two binding modes during protein-nanoparticle complexation. Both binding modes are driven by the cooperation of a favorable enthalpy in the presence of a dominating entropy gain. The first binding mode has a higher binding affinity, a lower equilibrium stoichiometry and is driven by a higher entropic contribution compared to the second type. The observed favorable enthalpy gain in both modes is attributed to non-covalent complexation whereas the entropy gain is associated with the re-organization of the silica surface including not only the solvent and counter ion release, but also the protein's conformational changes. Possible mechanisms are proposed to explain non-covalent complexations for each binding mode by relating the changes in the zeta potential and hydrodynamic radius to the obtained adsorption isotherms and calorimetry profile. Based on all these findings, it is proposed that lysozyme adsorption on nano-silica is the result of protein-nanoparticle and protein-protein interactions that further leads to spontaneous, non-directional and random complexation of silica through bridging flocculation.

The intrinsic luminescence of individual plasmonic nanostructures in aqueous suspension by photon time-of-flight spectroscopy

We have studied the intrinsic one-photon excited luminescence of freely diffusing gold nanoparticles of different shapes in aqueous suspension. Gold nanospheres were used as a reference, since their luminescence has been investigated previously and their light absorption and scattering properties are described analytically by Mie theory. We then studied gold nanobipyramids and nanostars that have recently gained interest as building blocks for new plasmonic nanosensors. The aim of our study is to determine whether the luminescence of gold nanoparticles of complex shape (bipyramids and nanostars) is a plasmon-assisted process, in line with the conclusions of recent spectroscopic studies on spheres and nanorods. Our study has been performed on particles in suspension in order to avoid any artefact from the heterogeneous environment created when particles are deposited on a substrate. We employ a recently developed photon time-of-flight method in combination with correlation spectroscopy of the light scattered by the particles to probe the luminescent properties of individual particles based on a particle-by-particle spectral analysis. Furthermore, we have performed resonant light scattering spectroscopic measurements on the same samples. Our work demonstrates the power of our time-of flight method for uncovering the plasmonic signatures of individual bipyramids and nanostars during their brief passage in the focal volume of a confocal set-up. These spectral features of individual particles remain hidden in macroscopic measurements. We find that the intrinsic photoluminescence emission of gold bipyramids and gold nanostars is mediated by their localized surface plasmons.

Resonant light scattering spectroscopy of gold, silver and gold-silver alloy nanoparticles and optical detection in microfluidic channels

Dark field resonant light scattering by gold and silver nanoparticles enables the detection and spectroscopy of such particles with high sensitivity, down to the single-particle level, and can be used to implement miniaturised optical detection schemes for chemical and biological analysis. Here, we present a straightforward optical spectroscopic methodology for the quantitative spectrometric study of resonant light scattering (RLS) by nanoparticles. RLS spectroscopy is complementary to UV-visible absorbance measurements, and we apply it to the characterisation and comparison of different types of gold, silver and gold-silver alloy nanoparticles. The potential of gold and silver particles as alternatives for fluorescent probes in certain applications is discussed. RLS spectroscopy is shown to be useful for studying analyte-induced gold nanoparticle assembly and nanoparticle chemistry, which can induce radical changes in the plasmonic resonances responsible for the strong light scattering. Furthermore, the feasibility of dark field RLS detection and quantitation of metal nanoparticles in microfluidic volumes is demonstrated, opening interesting possibilities for the further development of microfluidic detection schemes.

The Electroviscous Behavior of Aqueous Dispersions of Amorphous Silica (Ludox)

The electroviscous effects in very dilute aqueous dispersions of amorphous silica (Ludox) were investigated at various levels of salt, pH, and volume fraction (<0.01) of solids. Viscosities were much higher than predicted from existing theories, which is ascribed to the formation of a thick, gel-like surface layer on the particle. The volume of a particle adjusts itself almost reversibly to the salt and pH levels of the liquid and can grow up to four times the dry volume. This explains the apparent discrepancy between published dry and wet particle sizes and also the reported anomalously large number of bound water layers around a particle. The existence of a gel layer leads to an abnormally large amount of surface conductance; this may explain the anomalities found in electrophoresis. The validity of the model is also supported by published results of the amount of nonbulk water as found with NMR. Copyright 2001 Academic Press.

Standardization of fluorescence spectra and the calibration of spectrofluorimeters

A technique is proposed that can be used to calibrate the amplitude of fluorescence spectra so that spectra reported by different laboratories can be compared quantitatively. The technique is based upon the scattering of light by a solution of polystyrene. In order to compare quantitatively data obtained from different spectrofluorimeters, these terms are defined: the spectrofluorimetric sensitivity, the noise-equivalent concentration, and the fluorophotometric reproducibility. The author shows how these quantities can be measured with the polystyrene standard.