Deleya marina as a model organism for studies of bacterial colonization and biofilm formation

Graphene-Based Coating to Mitigate Biofilm Development in Marine Environments

Due to its several economic and ecological consequences, biofouling is a widely recognized concern in the marine sector. The search for non-biocide-release antifouling coatings has been on the rise, with carbon-nanocoated surfaces showing promising activity. This work aimed to study the impact of pristine graphene nanoplatelets (GNP) on biofilm development through the representative marine bacteria Cobetia marina and to investigate the antibacterial mechanisms of action of this material. For this purpose, a flow cytometric analysis was performed and a GNP/polydimethylsiloxane (PDMS) surface containing 5 wt% GNP (G5/PDMS) was produced, characterized, and assessed regarding its biofilm mitigation potential over 42 days in controlled hydrodynamic conditions that mimic marine environments. Flow cytometry revealed membrane damage, greater metabolic activity, and endogenous reactive oxygen species (ROS) production by C. marina when exposed to GNP 5% (w/v) for 24 h. In addition, C. marina biofilms formed on G5/PDMS showed consistently lower cell count and thickness (up to 43% reductions) than PDMS. Biofilm architecture analysis indicated that mature biofilms developed on the graphene-based surface had fewer empty spaces (34% reduction) and reduced biovolume (25% reduction) compared to PDMS. Overall, the GNP-based surface inhibited C. marina biofilm development, showing promising potential as a marine antifouling coating.

Isolation, identification, and biochemical characterization of a novel bifunctional phosphomannomutase/phosphoglucomutase from the metagenome of the brown alga Laminaria digitata

Macroalgae host diverse epiphytic bacterial communities with potential symbiotic roles including important roles influencing morphogenesis and growth of the host, nutrient exchange, and protection of the host from pathogens. Macroalgal cell wall structures, exudates, and intra-cellular environments possess numerous complex and valuable carbohydrates such as cellulose, hemi-cellulose, mannans, alginates, fucoidans, and laminarin. Bacterial colonizers of macroalgae are important carbon cyclers, acquiring nutrition from living macroalgae and also from decaying macroalgae. Seaweed epiphytic communities are a rich source of diverse carbohydrate-active enzymes which may have useful applications in industrial bioprocessing. With this in mind, we constructed a large insert fosmid clone library from the metagenome of Laminaria digitata (Ochrophyta) in which decay was induced. Subsequent sequencing of a fosmid clone insert revealed the presence of a gene encoding a bifunctional phosphomannomutase/phosphoglucomutase (PMM/PGM) enzyme 10L6AlgC, closely related to a protein from the halophilic marine bacterium, Cobetia sp. 10L6AlgC was subsequently heterologously expressed in Escherichia coli and biochemically characterized. The enzyme was found to possess both PMM and PGM activity, which had temperature and pH optima of 45°C and 8.0, respectively; for both activities. The PMM activity had a K m of 2.229 mM and V max of 29.35 mM min-1 mg-1, while the PGM activity had a K m of 0.5314 mM and a V max of 644.7 mM min-1 mg-1. Overall characterization of the enzyme including the above parameters as well as the influence of various divalent cations on these activities revealed that 10L6AlgC has a unique biochemical profile when compared to previously characterized PMM/PGM bifunctional enzymes. Thus 10L6AlgC may find utility in enzyme-based production of biochemicals with different potential industrial applications, in which other bacterial PMM/PGMs have previously been used such as in the production of low-calorie sweeteners in the food industry.

Sulfobetaine Methacrylate Polymers of Unconventional Polyzwitterion Architecture and Their Antifouling Properties

Combining high hydrophilicity with charge neutrality, polyzwitterions are intensely explored for their high biocompatibility and low-fouling properties. Recent reports indicated that in addition to charge neutrality, the zwitterion's segmental dipole orientation is an important factor for interacting with the environment. Accordingly, a series of polysulfobetaines with a novel architecture was designed, in which the cationic and anionic groups of the zwitterionic moiety are placed at equal distances from the backbone. They were investigated by in vitro biofouling assays, covering proteins of different charges and model marine organisms. All polyzwitterion coatings reduced the fouling effectively compared to model polymer surfaces of poly(butyl methacrylate), with a nearly equally good performance as the reference polybetaine poly(3-(N-(2-(methacryloyloxy)ethyl)-N,N-dimethylammonio)propanesulfonate). The specific fouling resistance depended on the detailed chemical structure of the polyzwitterions. Still, while clearly affecting the performance, the precise dipole orientation of the sulfobetaine group in the polyzwitterions seems overall to be only of secondary importance for their antifouling behavior.

Effect of ozone stress on the intracellular metabolites from Cobetia marina

A GCxGC-MS system was employed with a non-polar × mid-polar column set for the metabolic non-target analysis of Cobetia marina, the model bacteria for marine biofouling. C. marina was treated with ozone to investigate the intracellular metabolic state change under oxidative stress. A minimal inhibitory concentration test was involved to guarantee that the applied ozone dosages were not lethal for the cells. In this study, non-target analyses were performed to identify the metabolites according to the NIST database. As a result, over 170 signals were detected under normal living conditions including 35 potential metabolites. By the comparison of ozone-treated and non-treated samples, five compounds were selected to describe observed trends of signals in the contour plots. Oleic acid exhibited a slight growth by increasing ozone dosage. In contrast, other metabolites such as the amino acid L-proline showed less abundance after ozone treatment, which was more evident once ozone dosage was raised. Thus, this work could provide a hint for searching for up/downregulating factors in such environmental stress conditions for C. marina. Graphical abstract.

Dynamic surface deformation of silicone elastomers for management of marine biofouling: laboratory and field studies using pneumatic actuation

Many strategies have been developed to improve the fouling release (FR) performance of silicone coatings. However, biofilms inevitably build on these surfaces over time. Previous studies have shown that intentional deformation of silicone elastomers can be employed to detach biofouling species. In this study, inspired by the methods used in soft-robotic systems, controlled deformation of silicone elastomers via pneumatic actuation was employed to detach adherent biofilms. Using programmed surface deformation, it was possible to release > 90% of biofilm from surfaces in both laboratory and field environments. A higher substratum strain was required to remove biofilms accumulated in the field environment as compared with laboratory-grown biofilms. Further, the study indicated that substratum modulus influences the strain needed to de-bond biofilms. Surface deformation-based approaches have potential for use in the management of biofouling in a number of technological areas, including in niche applications where pneumatic actuation of surface deformation is feasible.

Thermodynamic analysis of marine bacterial attachment to oligo(ethylene glycol)-terminated self-assembled monolayers

Colloidal models are frequently used to model the thermodynamics of bacterial attachment to surfaces. The most commonly used of such models is that proposed by van Oss, Chaudhury and Good, which includes both non-polar and polar (including hydrogen bonding) interactions between the attaching bacterium, the attachment substratum and the aqueous environment. We use this model to calculate the free energy of adhesion, ∆Gadh, for attachment of the marine bacterium Cobetia marina to well defined attachment substrata that systematically vary in their chemistry and their ability to attach bacteria, namely a series of oligo(ethylene glycol) (OEG) terminated self-assembled monolayers that vary in the number of OEG moieties. For this system, the values of ∆Gadh calculated using VCG do not correlate with observed attachment profiles. We examine the validity of a number of assumptions inherent in VCG and other colloidal models of adhesion, with special attention paid to those regarding bacterial surfaces.

ARGET-ATRP synthesis and characterization of PNIPAAm brushes for quantitative cell detachment studies

Stimuli responsive (or "smart") polymer brushes represent a non-toxic approach for achieving release of biofouling layers. Thermo-responsive poly(N-isopropylacrylamide) (PNIPAAm) polymer brushes have been shown to modulate bacterial adhesion and release through transition between temperatures above and below the lower critical solution temperature (LCST ~32 °C) of PNIPAAm in water. In this article, we describe a convenient method to synthesize grafted PNIPAAm brushes over large areas for biological studies using a relatively simple and rapid method which allows atom transfer radical polymerization (ATRP) in presence of air using the activator regenerated electron transfer (ARGET) mechanism. PNIPAAm brushes were characterized using X-ray photoelectron spectroscopy, time-of-flight secondary ion mass spectroscopy, Fourier transform infrared spectroscopy, ellipsometry, and contact angle measurements. Our studies demonstrate that uniform, high purity PNIPAAm brushes with controlled and high molecular weight can be easily produced over large areas using ARGET-ATRP. We also report the use of a spinning disk apparatus to systematically and quantitatively study the detachment profiles of bacteria from PNIPAAm surfaces under a range (0-400 dyne/cm(2)) of shear stresses.

Microfluidic assay to quantify the adhesion of marine bacteria

For both, environmental and medical applications, the quantification of bacterial adhesion is of major importance to understand and support the development of new materials. For marine applications, the demand is driven by the quest for improved fouling-release coatings. To determine the attachment strength of bacteria to coatings, a microfluidic adhesion assay has been developed which allows probing at which critical wall shear stress bacteria are removed from the surface. Besides the experimental setup and the optimization of the assay, we measured adhesion of the marine bacterium Cobetia marina on a series of differently terminated self-assembled monolayers. The results showed that the adhesion strength of C. marina changes with surface chemistry. The difference in critical shear stress needed to remove bacteria can vary by more than one order of magnitude if a hydrophobic material is compared to an inert chemistry such as polyethylene glycol.

Engineered antifouling microtopographies: the role of Reynolds number in a model that predicts attachment of zoospores of Ulva and cells of Cobetia marina

A correlation between the attachment density of cells from two phylogenetic groups (prokaryotic Bacteria and eukaryotic Plantae), with surface roughness is reported for the first time. The results represent a paradigm shift in the understanding of cell attachment, which is a critical step in the biofouling process. The model predicts that the attachment densities of zoospores of the green alga, Ulva, and cells of the marine bacterium, Cobetia marina, scale inversely with surface roughness. The size and motility of the bacterial cells and algal spores were incorporated into the attachment model by multiplying the engineered roughness index (ERI(II)), which is a representation of surface energy, by the Reynolds number (Re) of the cells. The results showed a negative linear correlation of normalized, transformed attachment density for both organisms with ERI(II) x Re (R(2) = 0.77). These studies demonstrate for the first time that organisms respond in a uniform manner to a model, which incorporates surface energy and the Reynolds number of the organism.

Effect of substratum surface chemistry and surface energy on attachment of marine bacteria and algal spores

Two series of self-assembled monolayers (SAMs) of omega-substituted alkanethiolates on gold were used to systematically examine the effects of varying substratum surface chemistry and energy on the attachment of two model organisms of interest to the study of marine biofouling, the bacterium Cobetia marina (formerly Halomonas marina) and zoospores of the alga Ulva linza (formerly Enteromorpha linza). SAMs were formed on gold-coated glass slides from solutions containing mixtures of methyl- and carboxylic acid-terminated alkanethiols and mixtures of methyl- and hydroxyl-terminated alkanethiols. C. marina attached in increasing numbers to SAMs with decreasing advancing water contact angles (theta(AW)), in accordance with equation-of-state models of colloidal attachment. Previous studies of Ulva zoospore attachment to a series of mixed methyl- and hydroxyl-terminated SAMs showed a similar correlation between substratum theta(AW) and zoospore attachment. When the hydrophilic component of the SAMs was changed to carboxylate, however, the profile of attachment of Ulva was significantly different, suggesting that a more complex model of interfacial energetics is required.

A biological assay for detection of heterogeneities in the surface hydrophobicity of polymer coatings exposed to the marine environment

Minimally adhesive polymers are being developed as potential coatings for use in the marine environment. A 'bioprobe', the bacterium Psychrobacter sp. strain SW5, was employed to detect heterogeneities in substratum hydrophobicity at a micrometer level, rather than the millimeter level detected by traditional contact angle measurements. This novel assay was based on substratum-induced shifts in bacterial morphology and was used to demonstrate that characteristics of these surfaces can be evaluated for maintenance of parameters such as low surface free energy as well as temporal stability when immersed in water. Immersion of developmental substrata in artificial seawater for up to 90d prior to testing with the bioprobe potentially affects the stability of the designed characteristics of the polymers. It is proposed that the shifts in cell and biofilm morphology results from changes influencing the surface hydrophobicity of the polymers. An unpredicted outcome of this testing was the detection of modifications to coatings inferred by the addition of filler particles. Exposure of coatings to the natural microbial community of seawater revealed colonization characteristics that substantiate the results obtained by using the bioindicator.

Surface-grafted, environmentally sensitive polymers for biofilm release

Controlling bacterial biofouling is desirable for almost every human enterprise in which solid surfaces are introduced into nonsterile aqueous environments. One approach that is used to decrease contamination of manufactured devices by microorganisms is using materials that easily slough off accumulated material (i.e., fouling release surfaces). The compounds currently used for this purpose rely on low surface energy to inhibit strong attachment of organisms. In this study, we examined the possible use of environmentally responsive (or "smart") polymers as a new class of fouling release agents; a surface-grafted thermally responsive polymer, poly(N-isopropylacrylamide) (PNIPAAM), was used as a model compound. PNIPAAM is known to have a lower critical solubility temperature of approximately 32 degrees C (i.e., it is insoluble in water at temperatures above 32 degrees C and is soluble at temperatures below 32 degrees C). Under experimental conditions, >90% of cultured microorganisms (Staphylococcus epidermidis, Halomonas marina) and naturally occurring marine microorganisms that attached to grafted PNIPAAM surfaces during 2-, 18-, 36-, and 72-h incubations were removed when the hydration state of the polymer was changed from a wettability that was favorable for attachment to a wettability that was less favorable. Of particular significance is the observation that an organism known to attach in the greatest numbers to hydrophobic substrata (i.e., H. marina) was removed when transition of PNIPAAM to a more hydrated state occurred, whereas an organism that attaches in the greatest numbers to hydrophilic substrata (i.e., S. epidermidis) was removed when the opposite transition occurred. Neither solvated nor desolvated PNIPAAM exhibited intrinsic fouling release properties, indicating that the phase transition was the important factor in removal of organisms. Based on our observations of the behavior of this model system, we suggest that environmentally responsive polymers represent a new approach for controlling biofouling release.

Stress-Induced Production of Biofilm in the Hyperthermophile Archaeoglobus fulgidus

Archaeoglobus fulgidus, an anaerobic marine hyperthermophile, forms a biofilm in response to environmental stresses. The biofilm is a heterogeneous, morphologically variable structure containing protein, polysaccharide, and metals. Production of the biofilm can be induced by nonphysiological extremes of pH and temperature, by high concentrations of metals, and by addition of antibiotics, xenobiotics, or oxygen. Cells within the biofilm show an increased tolerance to otherwise toxic environmental conditions. Metals sequestered within the biofilm stimulate growth of A. fulgidus cells in metal-depleted medium. These data suggest that cells may produce biofilm as a mechanism for concentrating cells and attaching to surfaces, as a protective barrier, and as a reserve nutrient. Because similar biofilms are formed by Archaeoglobus profundus, Methanococcus jannaschii, and Methanobacterium thermoautotrophicum, biofilm formation might be a common stress response mechanism among the archaea.

Attachment of bacteria to model solid surfaces: oligo(ethylene glycol) surfaces inhibit bacterial attachment

Bacterial cell attachment to the surfaces of self-assembled monolayers formed by the adsorption of omega-substituted alkanethiols on transparent gold films has been studied under defined bacterial culture and flow conditions. Phase contrast microscopy was used to quantify the attachment of two organisms, one of medical (Staphylococcus epidermidis) and one of marine (Deleya marina) importance. Self-assembled monolayers terminated with hexa(ethylene glycol), methyl, carboxylic acid and fluorocarbon groups were investigated. Over the range of experimental conditions, self-assembled monolayers formed from HS(CH2)11(OCH2CH2)6OH were found to be uniformly resistant to bacterial attachment, with a 99.7% reduction of attachment for both organisms when compared to the most fouled surface for each organism. On other surfaces, S. epidermidis and D. marina were shown to exhibit very different attachment responses to the wettability of the substratum. While the attachment of S. epidermidis correlated positively with surface hydrophilicity, D. marina showed a preference for hydrophobic surfaces. This study suggests that surfaces incorporating high densities of oligo(ethylene glycol) are good candidates for surfaces that interact minimally with bacteria.