Determination of sodium fluoroacetate (compound 1080) in poison baits by HPLC

Quantitative determination of sodium monofluoroacetate "1080" in infant formulas and dairy products by isotope dilution LC-MS/MS

A fast and easy-to-use confirmatory liquid-chromatography tandem mass-spectrometry (LC-MS/MS) based-method was developed for the analysis of the pesticide sodium monofluoroacetate (MFA, also called "1080") in infant formulas and related dairy products. Extraction of the compound encompassed sample reconstitution and liquid-liquid extraction under acidic conditions. Time-consuming solid-phase extraction steps for clean-up and enrichment and tedious derivatisation were thus avoided. Resulting sample extracts were analysed by electrospray ionisation (ESI) in negative mode. Quantification was performed by the isotopic dilution approach using (13)C-labelled MFA as internal standard. The procedure was validated according to the European document SANCO/12571/2013 and performance parameters such as linearity (r(2) > 0.99), precision (RSD(r) ≤ 9%, RSD(iR) ≤ 11%) and recovery (96-117%) fulfilled its requirements. Limit of quantifications (LOQ) was 1 µg kg(-1) for infant formulas and related dairy products except for whey proteins powders with a LOQ of 5 µg kg(-1). Method ruggedness was further assessed in another laboratory devoted to routine testing for quality control.

Monofluoroacetate-containing plants that are potentially toxic to livestock

Many plants worldwide contain monofluoroacetate and cause sudden death in livestock. These plants are primarily found in the southern continents of Africa, Australia, and South America, where they negatively affect livestock production. This review highlights past and current research investigating (1) the plants reported to contain monofluoroacetate and cause sudden death; (2) the mode of action, clinical signs, and pathology associated with poisoning by monofluoroacetate-containing plants; (3) chemical methods for the analysis of monofluoroacetate in plants; (4) the coevolution of native flora and fauna in Western Australia with respect to monofluoroacetate-containing plants; and (5) methods to mitigate livestock losses caused by monofluoroacetate-containing plants.

Rapid quantitative and qualitative confirmatory method for the determination of monofluoroacetic acid in foods by liquid chromatography–mass spectrometry

A rapid quantitative method and a qualitative confirmatory method for the determination of monofluoroacetic acid (MFA) in complex food matrices are presented. The quantitative method utilizes a water extraction, solid phase extraction clean-up and liquid chromatography-mass spectrometry (LC-MS) for determination of MFA. This method showed a high degree of specificity, detecting MFA in all of the spiked samples, while none of the unfortified samples tested positive for MFA. Spike recoveries were high in all matrices analyzed, varying from 85 to 110%, and comparable at low (2mg/L) and high (20mg/L) spiking levels. Repeatability tests at the low spiking levels yielded RSDs of less than 5% for all matrices analyzed. The qualitative confirmatory method developed is conceptually different from the quantitative method, ensuring that both methods would not be subject to the same interferences. The method uses the formation of the hydrazide of MFA through derivatization with 2-nitrophenylhydrazine. This derivatization is well established for the determination of carboxylic acids, but this is the first application to the determination of MFA. The derivatization yield was matrix dependent, however the limit of detection (LOD) (0.8microg/L) was sufficient to confirm the presence of MFA in all spiked matrices. Repeatability tests at the low spiking levels yielded RSDs of approximately 7% for all matrices analyzed.

Simultaneous determination of monofluoroacetate, difluoroacetate and trifluoroacetate in environmental samples by ion chromatography

A method is reported for the sensitive, simultaneous determination of mono- (MFA), di- (DFA), and trifluoroacetates (TFA) by ion chromatography (IC). These species were separated using a Dionex AS17 anion-exchange column employed with a potassium hydroxide gradient (via a Dionex EG40 eluent generator) and suppressed conductivity detection. The fluoroacetates were successfully separated from a range of inorganic and organic species likely to be present in environmental samples, in a total analysis time of 35 min (including re-equilibration of the column). Detection limits for mono-, di- and trifluoroacetate were 21, 38 and 36 microg/l, respectively, determined using a signal-to-noise ratio of 3, and were obtained using a sample injection volume of 50 microl. Precision was less than 0.83% relative standard deviation (RSD) for replicate injections performed over a period of 30 days. The method was applied to the determination of monofluoroacetate in river water samples and also in carrot baits.

Chromatographic analysis of chemical warfare agents

The usefulness and applications of the particular types of chromatography in the analysis of chemical warfare agents have been reviewed. A major problem in the chromatographic analysis of chemical warfare agents is the collection and preparation of the samples. The importance of this problem differs for the various types of chromatography. Significant differences occur in the way in which samples are collected from air, water, soil, vegetables or animal organisms. The analyses are characterized by the main groups of chemical warfare agents, e.g., organophosphorus, vesicants, irritants, etc. Account has been taken of the relationships between their properties and the possibilities of their chromatographic analysis. The advantages and disadvantages of particular types of chromatography in the analysis of the particular groups and individual agents have been considered. The detectability of particular chemical warfare agents has been assessed, together with the separating efficiency for their mixtures. Examples of applications of chromatographic systems and conditions of chromatographing are summarized in tables. It is concluded that chromatography is a very useful tool in the analysis of chemical warfare agents; GC and TLC have the most advantageous properties, HPLC being slightly inferior.

Synthesis and murine tissue uptake of sodium [18F]fluoroacetate

Fluoroacetate (FAc) is well known as the rodenticide "1080" and for its potent biochemical properties, but much less is known about its behavior in vivo. In order to study this behavior, the compound was labeled with 18F. The synthesis was accomplished in good yields (30%) from carrier-added radiofluorine gas by its conversion to [18F]tetrabutylammonium fluoride, followed by a heat-assisted halogen exchange with ethylbromoacetate. The isolated ester was rapidly and quantitatively hydrolysed with base to form [18F]FAc. preliminary studies in mice revealed relatively little soft tissue retention over the 4 h study period. However, substantial bone accumulation, indicative of defluorination, occurred to a significant degree.