A definitive method for the determination of small amounts of copper in biological materials by neutron activation analysis

Preparation of Three New Certified Reference Materials for Food and Environmental Analysis and Certification Using Laboratory Intercomparison as well as Primary Reference Measurement Procedures

Three new reference materials: MODAS-3 Herring Tissue (M-3 HerTis), MODAS-4 Cormorant Tissue (M-4 CormTis), and MODAS-5 Cod Tissue (M-5 CodTis) were prepared and certified on the basis of results of a worldwide intercomparison exercise. Independently of our proven method of establishing the certified and information values, the content of several essential and toxic elements was additionally determined by the use of ratio primary reference measurement procedures (definitive methods) based on radiochemical neutron activation analysis (RNAA) in the case of As, Cd, Co, Cr, Fe, Mo, Se, and U and isotope dilution mass spectrometry (IDMS) in the case of Hg, respectively. Good agreement of the established certified values and the results obtained by ratio primary reference measurement procedures confirmed the validity of the certification procedure. The total number of elements which could be certified amounted to 30, 21, 18 in M-3 HerTis, M-4 CormTis, and M-5 CodTis, respectively. The relative frequency of use of individual analytical techniques in this intercomparison campaign was calculated and discussed. Inductively coupled plasma mass spectrometry (ICP-MS) is now a dominant technique, followed by atomic absorption spectroscopy (AAS), NAA, and emission spectroscopy (ES). The decreasing share of NAA as compared to several earlier intercomparison exercises should be noticed. NAA is the only method in the array of highly sensitive methods of inorganic trace analysis, which is essentially free from blank. The lack of this method in the foreseeable future may be an obstacle in the prospective certification campaigns and may endanger the implementation of quality assurance in trace analysis.

Ratio primary reference measurement procedure (RPRMP) for the determination of iron in biological materials by RNAA

A new ratio primary reference measurement procedure (RPRMP), i.e. a definitive method for the determination of iron in biological materials, was devised. It is based on a combination of neutron activation with selective and quantitative post-irradiation separation of 59Fe from all accompanying radionuclides followed by γ-ray spectrometric measurement. The novel separation scheme, involving the use of column chromatography on two (anion and cation) exchange columns, was extensively checked using radioactive tracers and was shown to be very selective and truly quantitative. High selectivity of the separation scheme was achieved by exploiting the “anomalous” sorption of Fe(III) on medium cross-linked sulfonic cation exchanger from concentrated hydrobromic acid solution. The accuracy of the RPRMP was demonstrated by the analysis of several certified reference materials. The method was used for the analysis of the three INCT CRMs based on tobacco leaves in which Fe was originally not certified, because widely discordant results by different analytical techniques were obtained in world-wide intercomparisons. The results by RPRMP in those materials were in a very good agreement with our own results by INAA. Tentative certified values (TCV) for Fe were proposed as a combination of RPRMP and INAA results. Some possible sources of systematic errors in other analytical methods were discussed.

Two new reference materials based on tobacco leaves: certification for over a dozen of toxic and essential elements

The preparation, certification, and characterization of two new biological certified reference materials for inorganic trace analysis have been presented. They are based on two different varieties of tobacco leaves, namely, Oriental Basma Tobacco Leaves (INCT-OBTL-5), grown in Greece, and Polish Virginia Tobacco Leaves (INCT-PVTL-6), grown in Poland. Certification of the materials was based on the statistical evaluation of results obtained in a worldwide interlaboratory comparison, in which 87 laboratories from 18 countries participated, providing 2568 laboratory averages on nearly 80 elements. It was possible to establish the certified values of concentration for many elements in the new materials, that is, 37 in INCT-OBTL-5 and 36 in INCT-PVTL-6, including several toxic ones like As, Cd, Hg, Pb, and so forth. The share and the role of instrumental analytical techniques used in the process of certification of the new CRMs are discussed.

Accurate determination of cobalt traces in several biological reference materials

A newly devised, very accurate ("definitive") method for the determination of trace amounts of cobalt in biological materials was validated by the analysis of several certified reference materials. The method is based on a combination of neutron activation and selective and quantitative postirradiation isolation of radiocobalt from practically all other radionuclides by ion-exchange and extraction chromatography followed by gamma-ray spectrometric measurement. The significance of criteria that should be fulfilled in order to accept a given result as obtained by the "definitive method" is emphasized. In view of the demonstrated very good accuracy of the method, it is suggested that our values for cobalt content in those reference materials in which it was originally not certified (SRM 1570 spinach, SRM 1571 orchard leaves, SRM 1577 bovine liver, and Czechoslovak bovine liver 12-02-01) might be used as provisional certified values.

Determination of copper by isotopic dilution

A rapid and selective method was used for the determination of copper by isotopic dilution employing substoichiometric extraction with dithizone in carbon tetrachloride. The appropriate pH range for the substoichiometric extraction was 2-7. In the analysis, even a large excess of elements forming extractable complexes with dithizone does not interfere. The accuracy and precision of the method were evaluated. The method has been applied to analysis of reference materials, wheat flour, wine, and beer.