The role of bacterial surface and substratum hydrophobicity in adhesion ofLeptospira biflexa serovarpatoc 1 to inert surfaces

Role of Environmental Variables in the Transport of Microbes in Stormwater

Microbial pathogens present in stormwater, which originate from human sewage and animal faecal matters, are one of the major impediments in stormwater reuse. The transport of microbes in stormwater is more than just a physical process. The mobility of microbes in stormwater is governed by many factors, such as dissolved organic matter, cations, pH, temperature and water flow. This paper examined the roles of three environmental variables, namely: dissolved organic matter, positive cations and stormwater flow on the transport of two faecal indicator bacteria (FIB), Enterococcus spp. and Escherichia coli. Stormwater runoff samples were collected during twelve wet weather events and one dry weather event from a medium density residential urban catchment in Brisbane. Enterococcus spp. numbers as high as 3 × 104 cfu/100 mL were detected in the stormwater runoff, while Escherichia coli numbers up to 3.6 × 103 cfu/100 mL were observed. The dissolved organic carbon (DOC) in the stormwater samples was in the range of 2.2–5.9 mg/L with an average concentration of 4.5 mg/L in which the hydrophilic carbon constituted the highest mass fraction of 60–80%. The results also showed that the transport of FIB in stormwater was reduced with an increasing concentration of the hydrophilic organic fraction, especially the humic fraction. On the contrary, the concentration of trivalent cations and stormwater flow rate showed a positive correlation with the FIB numbers. These findings indicated the potentiality to make a good use and measurement of simple environmental variables to reflect the degree of microbe transport in stormwater from residential/suburban catchments.

Leptospira interrogans binds to cadherins

Leptospirosis, caused by pathogenic species of Leptospira, is the most widespread zoonosis and has emerged as a major public health problem worldwide. The adhesion of pathogenic Leptospira to host cells, and to extracellular matrix (ECM) components, is likely to be necessary for the ability of leptospires to penetrate, disseminate and persist in mammalian host tissues. Previous work demonstrated that pathogenic L. interrogans binds to host cells more efficiently than to ECM. Using two independent screening methods, mass spectrometry and protein arrays, members of the cadherin family were identified as potential L. interrogans receptors on mammalian host surfaces. We focused our investigation on vascular endothelial (VE)-cadherin, which is widely expressed on endothelia and is primarily responsible for endothelial cell-cell adhesion. Monolayers of EA.hy926 and HMEC-1 endothelial cells produce VE-cadherin, bind L. interrogans in vitro, and are disrupted upon incubation with the bacteria, which may reflect the endothelial damage seen in vivo. Dose-dependent and saturable binding of L. interrogans to the purified VE-cadherin receptor was demonstrated and pretreatment of purified receptor or endothelial cells with function-blocking antibody against VE-cadherin significantly inhibited bacterial attachment. The contribution of VE-cadherin to leptospiral adherence to host endothelial cell surfaces is biologically significant because VE-cadherin plays an important role in maintaining the barrier properties of the vasculature. Attachment of L. interrogans to the vasculature via VE-cadherin may result in vascular damage, facilitating the escape of the pathogen from the bloodstream into different tissues during disseminated infection, and may contribute to the hemorrhagic manifestations of leptospirosis. This work is first to describe a mammalian cell surface protein as a receptor for L. interrogans.

The role of conditioning film formation and surface chemical changes on Xylella fastidiosa adhesion and biofilm evolution

Biofilms are complex microbial communities with important biological functions including enhanced resistance against external factors like antimicrobial agents. The formation of a biofilm is known to be strongly dependent on substrate properties including hydrophobicity/hydrophilicity, structure, and roughness. The adsorption of (macro)molecules on the substrate, also known as conditioning film, changes the physicochemical properties of the surface and affects the bacterial adhesion. In this study, we investigate the physicochemical changes caused by Periwinkle wilt (PW) culture medium conditioning film formation on different surfaces (glass and silicon) and their effect on X. fastidiosa biofilm formation. Contact angle measurements have shown that the film formation decreases the surface hydrophilicity degree of both glass and silicon after few hours. Atomic force microscopy (AFM) images show the glass surface roughness is drastically reduced with conditioning film formation. First-layer X. fastidiosa biofilm on glass was observed in the AFM liquid cell after a period of time similar to that determined for the hydrophilicity changes. In addition, attenuation total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy supports the AFM observation, since the PW absorption spectra increases with time showing a stronger contribution from the phosphate groups. Although hydrophobic and rough surfaces are commonly considered to increase bacteria cell attachment, our results suggest that these properties are not as important as the surface functional groups resulting from PW conditioning film formation for X. fastidiosa adhesion and biofilm development.

Effect of laminar flow velocity on the kinetics of surface recolonization by Mot(+) and Mot (-) Pseudomonas fluorescens

Computer-enhanced microscopy (CEM) was used to monitor bacteria colonizing the inner surfaces of a 1×3 mm glass flow cell. Image analysis provided a rapid and reliable means of measuring microcolony count, microcolony area, and cell motility. The kinetics of motile and nonmotilePseudomonas fluorescens surface colonization were compared at flow velocities above (120μm sec(-1)) and below (8μm sec(-1)) the strain's maximum motility rate (85μm sec(-1)). A direct attachment assay confirmed that flagellated cells undergo initial attachment more rapidly than nonflagellated cells at high and low flow. During continuous-flow slide culture, neither the rate of growth nor the timing of recolonization (cell redistribution within surface microenvironments) were influenced by flow rate or motility. However, the amount of reattachment of recolonizing cells was both flow and motility dependent. At 8μm sec(-1) flow, motility increased reattachment sixfold, whereas at 120μm sec(-1) flow, motility increased reattachment fourfold. The spatial distribution of recolonizing cells was also influenced by motility. Motile cells dispersed over surfaces more uniformly (mean distance to the nearest neighbor was 47.0μm) than nonmotile cells (mean distance was 14.2μm) allowing uniform biofilm development through more effective redistribution of cells over the surface during recolonization. In addition, motile cell backgrowth (where cells colonize against laminar flow) occurred four times more rapidly than nonmotile cell backgrowth at low flow (where rate of motility exceeded flow), and twice as rapidly at high flow (where flow exceeded the rate of motility). The observed backgrowth of Mot(+) cells against high flow could only have occurred as the result of motile attachment behavior. These results confirm the importance of motility as a behavioral mechanism in colonization and provides an explanation for enhanced colonization by motile cells in environments lacking concentration gradients necessary for chemotactic behavior.