Chitosan-dextran sulfate nanoparticles for delivery of an anti-angiogenesis peptide

Nanoassemblies of Chitosan-Based Polyelectrolyte Complexes as Nucleic Acid Delivery Systems

Nucleic acid delivery requires vectorization for protection from nucleases, preventing clearance by the reticuloendothelial system, and targeting to allow cellular uptake. Nanovectors meeting the above specifications should be safe for the patient, simple to manufacture, and display long-term stability. Our nanovectors were obtained via the green process of polyelectrolyte complexation, carried out at 25 °C in water at a low shear rate using chitosan (a polycationic biocompatible polysaccharide of specific molar mass and acetylation degree) and dextran sulfate as a polyanionic biocompatible polysaccharide. These complexes formed nanoassemblies of primary nanoparticles (20-35 nm) and maintained their colloidal stability for over 1 year at 25 °C. They could be steam sterilized, and a model nucleic acid could be either encapsulated or surface adsorbed. A targeting agent was finally bound to their surface. This work serves as a proof of concept of the suitability of chitosan-based polyelectrolyte complexes as nanovectors by sequential multilayered adsorption of various biomacromolecules.

Controlled release of silica-coated insulin-loaded chitosan nanoparticles as a promising oral administration system

BACKGROUND

Oral insulin administration has recently become one of the most exciting research subjects. Different approaches have been carried out to get an effective oral insulin delivery system using nanotechnology. The development of a delivery system that overcomes the difficulties of oral insulin administration, achieving high stability and minimal side effects, is still an urgent need. Therefore, this study is considered one of the efforts to design a new prospective drug delivery nano-composite (silica-coated chitosan-dextran sulfate nanoparticles).

METHODS

Chitosan-dextran sulfate nanoparticles (CS-DS NPs) were prepared via a complex coacervation method and then coated with silica. Uncoated and silica-coated CS-DS NPs were physically characterized via different techniques. Transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) analysis, and atomic force microscopy (AFM) have been used to investigate the chemical elements, size, morphology, and surface properties of the prepared formulations. Differential scanning calorimetry (DSC) to assess the thermal properties of formed nano-formulations. Fourier transform infrared (FT-IR) spectroscopy investigated the silica coat and chitosan interaction. The encapsulation efficiency was evaluated using high-performance liquid chromatography (HPLC) analysis. The insulin release profile of nano-formulations was performed with and without silica coat at two different pHs (5.5,7), nearly simulating the environment of the gastrointestinal tract (GIT).

RESULTS

The silica-coated CS-DS NPs revealed interesting physicochemical properties exemplified by suitable core particle size obtained by TEM images (145.31 ± 33.15 nm), hydrodynamic diameter (210 ± 21 nm), high stability indicated by their zeta potential value (-32 ± 3.2 mV), and adequate surface roughness assessed by AFM. The encapsulation efficiency of insulin-loaded chitosan nanoparticles (ICN) was (66.5%) higher than that of insulin-chitosan complex nanoparticles (ICCN). The silica-coated ICN demonstrated a controlled insulin release profile at pHs (5.5 and 7) compared with uncoated ICN.

CONCLUSION

The silica-coated ICN can be an efficient candidate as a desired oral delivery system, overcoming the common obstacles of peptides and proteins delivery and achieving high stability and controlled release for further applications.

Biopolymer Nano-Network for Antimicrobial Peptide Protection and Local Delivery

Antimicrobial resistance (AMR) develops when bacteria no longer respond to conventional antimicrobial treatment. The limited treatment options for resistant infections result in a significantly increased medical burden. Antimicrobial peptides offer advantages for treatment of resistant infections, including broad-spectrum activity and lower risk of resistance development. However, sensitivity to proteolytic cleavage often limits their clinical application. Here, a moldable and biodegradable colloidal nano-network is presented that protects bioactive peptides from enzymatic degradation and delivers them locally. An antimicrobial peptide, PA-13, is encapsulated electrostatically into positively and negatively charged nanoparticles made of chitosan and dextran sulfate without requiring chemical modification. Mixing and concentration of oppositely charged particles form a nano-network with the rheological properties of a cream or injectable hydrogel. After exposure to proteolytic enzymes, the formed nano-network loaded with PA-13 eliminates Pseudomonas aeruginosa during in vitro culture and in an ex vivo porcine skin model while the unencapsulated PA-13 shows no antibacterial effect. This demonstrates the ability of the nano-network to protect the antimicrobial peptide in an enzyme-challenged environment, such as a wound bed. Overall, the nano-network presents a useful platform for antimicrobial peptide protection and delivery without impacting peptide bioactivity.

Chitosan-based blends for biomedical applications

Polysaccharides are the most abundant naturally available carbohydrate polymers; composed of monosaccharide units covalently connected together. Chitosan is the most widely used polysaccharides because of its exceptional biocompatibility, mucoadhesion, and chemical versatility. However, it suffers from a few drawbacks, e.g. poor mechanical properties and antibacterial activity for biomedical applications. Blending chitosan with natural or synthetic polymers may not merely improve its physicochemical and mechanical properties, but may also improve its bioactivity-induced properties. This review paper summarizes progress in chitosan blends with biodegradable polymers and polysaccharides and their biomedical applications. Blends of chitosan with alginate, starch, cellulose, pectin and dextran and their applications were particularly addressed. The critical and challenging aspects as well as the future ahead of the use of chitosan-based blends were eventually enlightened.

Formulation and Evaluation of Microwave-Modified Chitosan-Curcumin Nanoparticles-A Promising Nanomaterials Platform for Skin Tissue Regeneration Applications Following Burn Wounds

Improved physicochemical properties of chitosan-curcumin nanoparticulate carriers using microwave technology for skin burn wound application are reported. The microwave modified low molecular weight chitosan variant was used for nanoparticle formulation by ionic gelation method nanoparticles analyzed for their physicochemical properties. The antimicrobial activity against Staphylococcus aureus and Pseudomonas aeruginosa cultures, cytotoxicity and cell migration using human dermal fibroblasts-an adult cell line-were studied. The microwave modified chitosan variant had significantly reduced molecular weight, increased degree of deacetylation and decreased specific viscosity. The nanoparticles were nano-sized with high positive charge and good dispersibility with entrapment efficiency and drug content in between 99% and 100%, demonstrating almost no drug loss. Drug release was found to be sustained following Fickian the diffusion mechanism for drug release with higher cumulative drug release observed for formulation (F)2. The microwave treatment does not render a destructive effect on the chitosan molecule with the drug embedded in the core of nanoparticles. The optimized formulation precluded selected bacterial strain colonization, exerted no cytotoxic effect, and promoted cell migration within 24 h post application in comparison to blank and/or control application. Microwave modified low molecular weight chitosan-curcumin nanoparticles hold potential in delivery of curcumin into the skin to effectively treat skin manifestations.

Fabrication of Biopolymer Based Nanoparticles for the Entrapment of Chromium and Iron Supplements

The objective of this study was to encapsulate iron and chromium into novel nanoparticles formulated using chitosan (CS), dextran sulfate (DS) and whey protein isolate (WPI) for oral drug delivery. Empty and loaded CS-DS nanoparticles were prepared via complex coacervation whilst whey protein nanocarriers were produced by a modified thermal processing method using chitosan. The physiochemical properties of the particles were characterized to determine the effects of formulation variables, including biopolymer ratio on particle size and zeta potential. Permeability studies were also undertaken on the most stable whey protein–iron nanoparticles by measuring Caco-2 ferritin formation. A particle size analysis revealed that the majority of samples were sub-micron sized, ranging from 420–2400 nm for CS-DS particles and 220–1000 nm for WPI-CS samples. As expected, a higher chitosan concentration conferred a 17% more positive zeta potential on chromium-entrapped WPI nanoparticles, whilst a higher dextran volume decreased the size of CS-DS nanoparticles by 32%. The addition of iron also caused a significant increase in size for all samples, as seen where the loaded WPI samples were 296 nm larger than the empty particles. Caco-2 iron absorption revealed that one formulation, which had the lowest particle size (226 ± 10 nm), caused a 64% greater iron absorption compared to the ferrous sulfate standard. This study describes, for the first time, the novel design of chromium- and iron-entrapped nanoparticles, which could act as novel systems for oral drug delivery.

Design of Experiment, Preparation, and in vitro Biological Assessment of Human Amniotic Membrane Extract Loaded Nanoparticles

Background:

Human amniotic membrane grafting could be potentially useful in ocular surface complications due to tissue similarity and the presence of factors that reduce inflammation, vascularization, and scarring. However, considerations like donor-derived infectious risk and the requirement of an invasive surgery limit the clinical application of such treatments. Moreover, the quick depletion of bioactive factors after grafting reduces the efficacy of treatments. Therefore, in the current study, the possibility of nano delivery of the bioactive factors extracted from the human amniotic membrane to the ocular surface was investigated.

Materials and methods:

Nanoparticles were prepared using polyelectrolyte complexation from chitosan and dextran sulfate. The effect of polymer ratio, pH, and the amount of extract on particle size and encapsulation efficacy were studied using Box-Behnken response surface methodology.

Results:

The optimum condition was obtained as follows: 4.9:1 ratio of dextran sulfate to chitosan, 600 µL amniotic membrane extract, and pH of 6. The prepared nanoparticles had an average size of 213 nm with 77% encapsulation efficacy. In the release test, after 10 days, approximately 50% of entrapped bioactive proteins were released from the nanocarriers in a controlled manner. Biological activity assessment on endothelial cells revealed amniotic membrane extract loaded nanoparticles had a longer and significant increase in anti-angiogenic effect when compared to the control.

Conclusion:

Our data elucidate the ability of nanotechnology in ocular targeted nano delivery of bioactive compounds.

Complex Polysaccharide-Based Nanocomposites for Oral Insulin Delivery

Polyelectrolyte nanocomposites rarely reach a stable state and aggregation often occurs. Here, we report the synthesis of nanocomposites for the oral delivery of insulin composed of alginate, dextran sulfate, poly-(ethylene glycol) 4000, poloxamer 188, chitosan, and bovine serum albumin. The nanocomposites were obtained by Ca²⁺-induced gelation of alginate followed by an electrostatic-interaction process among the polyelectrolytes. Chitosan seemed to be essential for the final size of the nanocomposites and there was an optimal content that led to the synthesis of nanocomposites of 400–600 nm hydrodynamic size. The enhanced stability of the synthesized nanocomposites was assessed with LUMiSizer after synthesis. Nanocomposite stability over time and under variations of ionic strength and pH were assessed with dynamic light scattering. The rounded shapes of nanocomposites were confirmed by scanning electron microscopy. After loading with insulin, analysis by HPLC revealed complete drug release under physiologically simulated conditions.

Review of polysaccharide particle-based functional drug delivery

This review investigates the significant role polysaccharide particles play in functional drug delivery. The importance of these systems is due to the wide variety of polysaccharides and their natural source meaning that they can provide biocompatible and biodegradable systems with a range of both biological and chemical functionality valuable for drug delivery. This functionality includes protection and presentation of working therapeutics through avoidance of the reticuloendothelial system, stabilization of biomacromolecules and increasing the bioavailability of incorporated small molecule drugs. Transport of the therapeutic is also key to the utility of polysaccharide particles, moving drugs from the site of administration through mucosal binding and transport and using chemistry, size and receptor mediated drug targeting to specific tissues. This review also scrutinizes the methods of synthesizing and constructing functional polysaccharide particle drug delivery systems that maintain and extend the functionality of the natural polysaccharides.

Alginate Nanoparticles for Drug Delivery and Targeting

Nanotechnology refers to the control, manipulation, study and manufacture of structures and devices at the nanometer size range. The small size, customized surface, improved solubility and multi-functionality of nanoparticles will continue to create new biomedical applications, as nanoparticles allow to dominate stability, solubility and bioavailability, as well controlled release of drugs. The type of a nanoparticle, and its related chemical, physical and morphological properties influence its interaction with living cells, as well as determine the route of clearance and possible toxic effects. This field requires cross-disciplinary research and gives opportunities to design and develop multifunctional devices, which allow the diagnosis and treatment of devastating diseases. Over the past few decades, biodegradable polymers have been studied for the fabrication of drug delivery systems. There was extensive development of biodegradable polymeric nanoparticles for drug delivery and tissue engineering, in view of their applications in controlling the release of drugs, stabilizing labile molecules from degradation and site-specific drug targeting. The primary aim is to reduce dosing frequency and prolong the therapeutic outcomes. For this purpose, inert excipients should be selected, being biopolymers, e.g. sodium alginate, commonly used in controlled drug delivery. Nanoparticles composed of alginate (known as anionic polysaccharide widely distributed in the cell walls of brown algae which, when in contact with water, forms a viscous gum) have emerged as one of the most extensively characterized biomaterials used for drug delivery and targeting a set of administration routes. Their advantages include not only the versatile physicochemical properties, which allow chemical modifications for site-specific targeting but also their biocompatibility and biodegradation profiles, as well as mucoadhesiveness. Furthermore, mechanical strength, gelation, and cell affinity can be modulated by combining alginate nanoparticles with other polymers, surface tailoring using specific targeting moieties and by chemical or physical cross-linking. However, for every physicochemical modification in the macromolecule/ nanoparticles, a new toxicological profile may be obtained. In this paper, the different aspects related to the use of alginate nanoparticles for drug delivery and targeting have been revised, as well as how their toxicological profile will determine the therapeutic outcome of the drug delivery system.

Glycans in nanomedicine, impact and perspectives

Glycans have been selected by nature for both structural and 'recognition' purposes. Taking inspiration from nature, nanomedicine exploits glycans not only as structural constituents of nanoparticles and nanostructured biomaterials but also as selective interactors of such glyco-nanotools. Surface glycosylation of nanoparticles finds application in targeting specific cells, whereas recent findings give evidence that the glycan content of cell microenvironment is able to induce the cell fate. This review will highlight the role of glycans in nanomedicine, schematizing the different uses and roles in drug-delivery systems and in biomaterials for regenerative medicine.

Influence of chitosan oligosaccharide on the gelling and wound healing properties of injectable hydrogels based on carboxymethyl chitosan/alginate polyelectrolyte complexes

In situ injectable hydrogels for wound healing based on carboxymethyl chitosan (CMCS) and alginate were developed in this work. The liquid mixture of CMCS and alginate solutions formed a gel by polyelectrolyte complexation after addition of d-glucono-δ-lactone (GDL), which slowly hydrolyzed and donated protons. When chitosan oligosaccharide (COS) was added into the mixture, a two-stage gelling process occurred. The primary gelling process was similar to that of the hydrogel without COS, while the secondary gelling process appeared about 20 min later, and much stronger hydrogels with storage modulus G' about 1 MPa, 10⁴ times higher, were obtained. COS also significantly influenced the microstructure of hydrogels as well as their biological activities. The hydrogels with 0.5% of COS significantly promoted proliferation of human umbilical cord mesenchymal stem cells (HUMSCs). These injectable hydrogels, especially when COS was added, remarkably accelerated the wound healing process in a mouse skin defect model. Microscopic wound analysis showed an increase of the thickness and integrity of epidermal tissue, increased formation of collagen fibers, and enhanced expression of vascular endothelial growth factor as compared to the control group.

Chitosan-dextran sulphate nanoparticles for GnRH release in rabbit insemination extenders

This study was designed to develop chitosan (CS)-dextran sulphate (DS) nanoparticles containing a GnRH analogue and to study their effect on rabbit (Oryctolagus cuniculus) semen quality. Six experimental extenders were tested as follows: (control) Tris-citric acid-glucose (TCG), (1) 0.05% CS-0.05% DS (4:1), (2) 0.1% CS-0.05% DS (4:1), (3) 0.05% CS-0.05% DS (3:1), (4) 0.1% CS-0.05% DS (3:1), (5) 0.1% CS-0.05% DS (2:1). CS and DS were dissolved in TCG medium, and nanoparticles were obtained through magnetic stirring. Rabbit seminal samples were incubated up to 5 hr at 37°C in the extenders, and seminal quality was evaluated. The entrapment efficiency was 40%-50%. After 5 hr at 37°C, a 20% of the hormone was released. Results showed that the presence of CS-DS nanoparticles did not affect rabbit semen motility, viability and membrane functionality; however, acrosome integrity was significantly higher versus control (p < .001).

Protection of GnRH analogue by chitosan-dextran sulfate nanoparticles for intravaginal application in rabbit artificial insemination

The present study was designed to prove new rabbit insemination extenders containing aminopeptidase inhibitors (AMIs) with or without chitosan (CS)-dextran sulfate (DS) nanoparticles entrapping the GnRH analogue. In addition, different hormone concentrations were tested in these extenders, evaluating their in vivo effect on rabbit reproductive performance after artificial insemination. A total of 911 females were inseminated with semen diluted with the four experimental extenders (C4 group: 4 μg buserelin/doe in control medium (Tris-citric acid-glucose supplemented with bestatin 10 μM and EDTA 20 mM), C5 group: 5 μg of buserelin/doe in control medium, Q4 group: 4 μg of buserelin/doe into CS-DS nanoparticles in control medium, Q5 group: 5 μg of busereline/doe into CS-DS nanoparticles in control medium). Results showed that fertility was significantly lower in C4 group compared to C5, Q5 and Q4 groups (0.7 versus 0.85, 0.85 and 0.82, respectively). On the contrary, prolificacy was similar in the four experimental groups studied (P > 0.05). We conclude that the CS-DS nanoparticles prepared by a coacervation process as carrier for buserelin acetate allows reducing the concentration of hormone used in extenders supplemented with bestatin and EDTA without affecting the fertility and prolificacy of rabbit females.

Thermoresponsive curcumin/DsiRNA nanoparticle gels for the treatment of diabetic wounds: synthesis and drug release

AIM

Chitosan (CS) has been extensively studied as drug delivery systems for wound healing. Results/methodology: CS nanoparticles were loaded with curcumin (Cur) and DsiRNA against prostaglandin transporter gene and they were incorporated into 20 and 25% w/v Pluronic F-127. The gels were later analyzed for their rheology, gelation temperature (T_gel), morphology, drug incorporation and in vitro drug release. The particle size was in the range of 231 ± 17-320 ± 20 nm, depending on CS concentration. The gels had T_gel of 23-28°C and exhibited sustained drug release with high accumulated amount of drugs over 48 h.

CONCLUSION

A thermo-sensitive gel containing Cur/DsiRNA CS nanoparticles was successfully developed and has a great potential to be further developed.

Smart Carriers and Nanohealers: A Nanomedical Insight on Natural Polymers

Biodegradable polymers are popularly being used in an increasing number of fields in the past few decades. The popularity and favorability of these materials are due to their remarkable properties, enabling a wide range of applications and market requirements to be met. Polymer biodegradable systems are a promising arena of research for targeted and site-specific controlled drug delivery, for developing artificial limbs, 3D porous scaffolds for cellular regeneration or tissue engineering and biosensing applications. Several natural polymers have been identified, blended, functionalized and applied for designing nanoscaffolds and drug carriers as a prerequisite for enumerable bionano technological applications. Apart from these, natural polymers have been well studied and are widely used in material science and industrial fields. The present review explains the prominent features of commonly used natural polymers (polysaccharides and proteins) in various nanomedical applications and reveals the current status of the polymer research in bionanotechnology and science sectors.

Therapeutic application of anti-angiogenic nanomaterials in cancers

Angiogenesis, the formation of new blood vessels from pre-existing vasculature, plays a vital role in physiological and pathological processes (embryonic development, wound healing, tumor growth and metastasis). The overall balance of angiogenesis inside the human body is maintained by pro- and anti-angiogenic signals. The processes by which drugs inhibit angiogenesis as well as tumor growth are called the anti-angiogenesis technique, a most promising cancer treatment strategy. Over the last couple of decades, scientists have been developing angiogenesis inhibitors for the treatment of cancers. However, conventional anti-angiogenic therapy has several limitations including drug resistance that can create problems for a successful therapeutic strategy. Therefore, a new comprehensive treatment strategy using antiangiogenic agents for the treatment of cancer is urgently needed. Recently researchers have been developing and designing several nanoparticles that show anti-angiogenic properties. These nanomedicines could be useful as an alternative strategy for the treatment of various cancers using anti-angiogenic therapy. In this review article, we critically focus on the potential application of anti-angiogenic nanomaterial and nanoparticle based drug/siRNA/peptide delivery systems in cancer therapeutics. We also discuss the basic and clinical perspectives of anti-angiogenesis therapy, highlighting its importance in tumor angiogenesis, current status and future prospects and challenges.

Preparation and Characterization of Mucoadhesive Buccal Nanoparticles Using Chitosan and Dextran Sulfate

The aim of this study was to formulate buccal mucoadhesive nanoparticles (NPs) using the natural mucoadhesive polymers. The natural mucoadhesive polymers chitosan (CS) and dextran sulfate sodium salt (DS) were used to prepare mucoadhesive NPs using the ionic gelation method. As the molecular weight of DS decreased, the amount of mucin and the number of buccal cells adsorbed on DS increased. The CS/DS NPs ranged from 100 to 200 nm in diameter. The adhesive interactions of CS/DS NPs with mucin were not significantly different from those of CS/sodium triphosphate pentabasic (TPP) NPs; however, CS/DS NPs exhibited 5 times greater mucoadhesive activity to buccal cells compared to control CS/TPP NPs in ex vivo adhesion tests. These results indicate that the buccal mucoadhesive properties of NPs can be improved using natural mucoadhesive polymers.

Acetylated starch nanocrystals: Preparation and antitumor drug delivery study

In this study, we developed a new nanoparticulate system for acetylated starch nanocrystals (ASN) using broken rice. ASN with different degrees of substitution (DS) of 0.04, 0.08 and 0.14 were prepared using acetic anhydride as acetylating agent through reaction with starch nanocrystals (SN). The resulting ASN were investigated for the capability to load and release doxorubicin hydrochloride (DOX), and the antitumor activities of DOX-loaded SN and DOX-loaded ASN were evaluated as potential drug delivery systems for cancer therapy. Cellular uptake and cytotoxicity of nanocrystals and the DOX-loaded nanocrystals were investigated using fluorescence microscopy and a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) (MTT) assay. Compared with acetylated starches (AS) and native starches (NS), ASN with DS 0.14 loaded up to 6.07% of DOX with a higher loading efficiency of 91.1% and had steadier drug-release rates. Toxicity analysis using the rat hepatocytes model suggested that ASN was biocompatible and could be used for drug delivery. Furthermore, ASN were taken up by cancer cells in vitro and significantly enhanced the cytotoxicity of DOX against HeLa human cervical carcinoma cells. The IC50 value of DOX-loaded ASN-DS 0.14 was 3.8μg/mL for 24h of treatment, which was significantly lower than that of free DOX (21μg/mL). These results indicate that the prepared ASN using broken rice is a promising vehicle for the controlled delivery of DOX for cancer therapy.

New nasal nanocomplex self-assembled from charged biomacromolecules: N,N,N-Trimethyl chitosan and dextran sulfate

Although chitosan (CHT, a linear cationic polysaccharide) is biodegradable, biocompatible, non-toxic, and mucoadhesive in nature, the low solubility of CHT in aqueous and alkaline media limits its applicability in pharmaceutical and biomedical field. This necessitate the introduction of new chemically-modified derivatives of CHT those can surmount the solubility barrier. Herein, N,N,N-trimethyl chitosan (TMC), a quaternized hydrophilic derivative of CHT, was synthesized by two-step reductive methylation of CHT and characterized for (1)H NMR and zeta potential measurements. Polyelectrolyte complexes (PECs) based on TMC and dextran sulfate (DS) were prepared via ionic interactions between charged functional groups of former polysaccharides at different pH conditions (pH 5, 8, 10, and 12) and characterized for physicochemical (particle size and zeta potential) and solid- state characterizations (HR-TEM, SEM, FTIR, TGA and XRD). At alkaline pH conditions, the participant polymer chains (TMC and DS) are sufficiently close to form more stable PECs. The release efficiency was assessed after loading a model drug into optimized PEC formulation. Data indicated that the PECs fabricated at alkaline pH presents a reliable formulation for pharmaceutical and biomedical applications.

Smart multifunctional nanoparticles in nanomedicine

Recent advances in nanotechnology caused a growing interest using nanomaterials in medicine to solve a number of issues associated with therapeutic agents. The fabricated nanomaterials with unique physical and chemical properties have been investigated for both diagnostic and therapeutic applications. Therapeutic agents have been combined with the nanoparticles to minimize systemic toxicity, increase their solubility, prolong the circulation half-life, reduce their immunogenicity and improve their distribution. Multifunctional nanoparticles have shown great promise in targeted imaging and therapy. In this review, we summarized the physical parameters of nanoparticles for construction of “smart” multifunctional nanoparticles and their various surface engineering strategies. Outlook and questions for the further researches were discussed.

Biomimetic supramolecular designs for the controlled release of growth factors in bone regeneration

The extracellular matrix (ECM) of tissues is an assembly of insoluble macromolecules that specifically interact with soluble bioactive molecules and regulate their distribution and availability to cells. Recapitulating this ability has been an important target in controlled growth factor delivery strategies for tissue regeneration and requires the design of multifunctional carriers. This review describes the integration of supramolecular interactions on the design of delivery strategies that encompass self-assembling and engineered affinity components to construct advanced biomimetic carriers for growth factor delivery. Several glycan- and peptide-based self-assemblies reported in the literature are highlighted and commented upon. These examples demonstrate how molecular design and chemistry are successfully employed to create versatile multifunctional molecules which self-assemble/disassemble in a precisely predicted manner, thus controlling compartmentalization, transport and delivery. Finally, we discuss whether recent advances in the design and preparation of supramolecular delivery systems have been sufficient to drive real translation towards a clinical impact.

Engineered nanoparticles for drug delivery in cancer therapy

In medicine, nanotechnology has sparked a rapidly growing interest as it promises to solve a number of issues associated with conventional therapeutic agents, including their poor water solubility (at least, for most anticancer drugs), lack of targeting capability, nonspecific distribution, systemic toxicity, and low therapeutic index. Over the past several decades, remarkable progress has been made in the development and application of engineered nanoparticles to treat cancer more effectively. For example, therapeutic agents have been integrated with nanoparticles engineered with optimal sizes, shapes, and surface properties to increase their solubility, prolong their circulation half-life, improve their biodistribution, and reduce their immunogenicity. Nanoparticles and their payloads have also been favorably delivered into tumors by taking advantage of the pathophysiological conditions, such as the enhanced permeability and retention effect, and the spatial variations in the pH value. Additionally, targeting ligands (e.g., small organic molecules, peptides, antibodies, and nucleic acids) have been added to the surface of nanoparticles to specifically target cancerous cells through selective binding to the receptors overexpressed on their surface. Furthermore, it has been demonstrated that multiple types of therapeutic drugs and/or diagnostic agents (e.g., contrast agents) could be delivered through the same carrier to enable combination therapy with a potential to overcome multidrug resistance, and real-time readout on the treatment efficacy. It is anticipated that precisely engineered nanoparticles will emerge as the next-generation platform for cancer therapy and many other biomedical applications.

Relative charge density model on chitosan-fucoidan electrostatic interaction: qualitative approach with element analysis

This paper proposes a relative charge density model of prepared chitosan-fucoidan nanoparticles (CFNs) to provide insight into an analysis of the ionic interactions in terms of polyelectrolyte complexes. Using the relative charge density model, the extent of the ionic interactions is predicted in terms of the pH (2 through 6) and used fucoidan to chitosan mass ratio (FCMR) (1:0.05 through 1:1), through which the formation of CFNs can be controlled to be ranked qualitatively according to size and stability. It was confirmed by the measurements of their zeta potentials and sizes and by the analysis of their decay with time. Moreover, the relative charge density model was validated to predict the isoelectric condition of a polyelectrolyte complexed suspension of CFNs. Elemental analysis with a proper mass-conversion showed that the ratio of the stoichiometric coefficients of sulfate groups to amino groups in CFNs formed were almost consistent to that of the sulfate groups to amino groups in a chitosan solution mixed with a fucoidan solution prior to the occurrence of polyelectrolyte complexation. In a pH 2-environment, there were locally intensive electrostatic interactions with a low yield to form sulfate group-rich CFNs. In contrast, in a pH 6-environment, extensive electrostatic interactions occurred to form sulfate group-poor CFNs with a high yield. In addition to the chitosan-amide groups, the separate yield-distribution of loaded chitosan indicated the possible involvement of positively charged amino groups in the electrostatic interactions among chitosan molecules.

Synthetic and bioinspired cage nanoparticles for drug delivery

Nanotechnology has the potential to revolutionize drug delivery, but still faces some limitations. One of the main issues regarding conventional nanoparticles is their poor drug-loading and their early burst release. Thus, to overcome these problems, researchers have taken advantage of the host–guest interactions that drive some assemblies to form cage molecules able to strongly entrap their cargo and design new nanocarriers called cage nanoparticles. These systems can be classified into two categories: bioinspired nanosystems such as virus-like particles, ferritin, small heat shock protein: and synthetic host–guest supramolecular systems that require engineering to actually form supramolecular nanoassemblies. This review will highlight the recent advances in cage nanoparticles for drug delivery with a particular focus on their biomedical applications.

Synthesis and characterization of cationic polymeric nanoparticles as simvastatin carriers for enhancing the osteogenesis of bone marrow mesenchymal stem cells

Simvastatin (SIM) can increase osteoblast activity and enhance osteogenesis. However, some limitations of SIM have been noted, such as statin-associated rhabdomyolysis and its poor solubility in water. In this study, we fabricated new cationic nanoparticles (NPs) designed for the controlled release of hydrophobic SIM and endocytosis by cells with the aim of reducing the total required amount of SIM administered and enhancing the osteogenesis of bone marrow mesenchymal stem cells (BMSCs). New copolymers of bis(poly(lactic-co-glycolic acid)-phenylalanine-polyethylene glycol)-quaternary ammonium grafted diethyltriamine (bis(PLGA-phe-PEG)-qDETA; BPPD) were created using a diethyltriamine-quaternary ammonium (qDETA) moiety, hetero-bifunctional polyethylene glycol (COOH-PEG-NH2), phenylalanine (phe) and poly(lactic-co-glycolic acid) (PLGA). SIM encapsulated in BPPD NPs (SIM/BPPD) was fabricated using a water-miscible solvent. The size distributions of BPPD NPs and SIM/BPPD NPs, the encapsulation efficacy and the in vitro release profile of SIM in SIM/BPPD NPs over 6days were investigated. Based on the results of Alizarin Red S staining, alkaline phosphatase (ALP) activity assays and quantitative polymerase chain reaction (Q-PCR) results, we propose that SIM/BPPD NPs may induce osteogenesis in BMSCs by enhancing the expression of an osteogenic gene, which subsequently elevates ALP activity and mineralization, resulting in enhanced BMSC osteogenesis. These results suggest that the SIM/BPPD NPs may be used as hydrophobic drug carriers to reduce the total required amount of SIM administered and to provide an effective SIM release mechanism for enhancing BMSC osteogenesis. Surprisingly, BPPD NPs were also shown to have the ability to promote osteogenesis in BMSCs by enhancing the expression of osteogenic genes, especially osteocalcin (OC), and subsequently elevating ALP activity and mineralization.

Development of Chitosan Nanoparticles as a Stable Drug Delivery System for Protein/siRNA

Chitosan nanoparticles (CS NPs) exhibit good physicochemical properties as drug delivery systems. The aim of this study is to determine the modulation of preparative parameters on the physical characteristics and colloidal stability of CS NPs. CS NPs were fabricated by ionic interaction with dextran sulphate (DS) prior to determination of their storage stability. The smallest CS NPs of 353 ± 23 nm with a surface charge of +56.2 ± 1.5 mV were produced when CS and DS were mixed at pH 4 and with a DS : CS mass ratio of 0.5 : 1. An entrapment efficiency of 98% was achieved when BSA/siRNA was loaded into the nanoparticles. The results also showed that particle size and surface charge of CS NPs were slightly changed up to 2 weeks when stored at 4°C. Greater particle size and surface charge were obtained with increasing the concentration of DS. In conclusion, NPs were sufficiently stable when kept at 4°C and able to carry and protect protein.

Chitosan-coated superparamagnetic iron oxide nanoparticles for doxorubicin delivery: synthesis and anticancer effect against human ovarian cancer cells

Doxorubicin-loaded chitosan-coated superparamagnetic iron oxide nanoparticles (Fe3 O4 ; SPIO-NPs) were prepared by coprecipitation and emulsification cross-linking method and uniform NPs with an average particle size of 82 nm, with high encapsulation efficiencies, were obtained. The drug-loading efficiency of doxorubicin (3.2 mg/mg NPs) showed better results for the chitosan-loaded SPIO-NPs as compared to the bare ones (0.5 mg/mg; p < 0.05). The incubation of A2780 and OVCAR-3 human ovarian cancer cells with doxorubicin-loaded and doxorubicin-loaded chitosan-coated SPIO-NPs, for 24, 48, 72, 96, and 120 h, showed significant IC50 (2.0 ± 0.6 and 7.1 ± 2.7 mm doxorubicin) and IC90 (4.0 ± 9.2 and 10 ± 0.5 mm doxorubicin), respectively, after 96 h of incubation. While, 95% and 98% growth inhibition was seen in A2780 and OVCAR-3 cells after the 96-h exposure to the doxorubicin-chitosan-SPIO-NPs (p < 0.05). A 5-day (120 h) incubation with doxorubicin-chitosan-SPIO-NPs showed that A2780 and OVCAR-3 cells were able to uptake 120 and 110 pg iron/cell, respectively, when treated with doxorubicin-chitosan-SPIO-NPs for 72 h (p < 0.05).