Cell proliferation on hydrogels

Numerical modeling of cell differentiation and proliferation in force-induced substrates via encapsulated magnetic nanoparticles

BACKGROUND AND OBJECTIVE

Cell migration, differentiation, proliferation and apoptosis are the main processes in tissue regeneration. Mesenchymal Stem Cells have the potential to differentiate into many cell phenotypes such as tissue- or organ-specific cells to perform special functions. Experimental observations illustrate that differentiation and proliferation of these cells can be regulated according to internal forces induced within their Extracellular Matrix. The process of how exactly they interpret and transduce these signals is not well understood.

METHODS

A previously developed three-dimensional (3D) computational model is here extended and employed to study how force-free substrates and force-induced substrate control cell differentiation and/or proliferation during the mechanosensing process. Consistent with experimental observations, it is assumed that cell internal deformation (a mechanical signal) in correlation with the cell maturation state directly triggers cell differentiation and/or proliferation. The Extracellular Matrix is modeled as Neo-Hookean hyperelastic material assuming that cells are cultured within 3D nonlinear hydrogels.

RESULTS

In agreement with well-known experimental observations, the findings here indicate that within neurogenic (0.1-1kPa), chondrogenic (20-25kPa) and osteogenic (30-45kPa) substrates, Mesenchymal Stem Cells differentiation and proliferation can be precipitated by inducing the substrate with an internal force. Therefore, cells require a longer time to grow and maturate within force-free substrates than within force-induced substrates. In the instance of Mesenchymal Stem Cells differentiation into a compatible phenotype, the magnitude of the net traction force increases within chondrogenic and osteogenic substrates while it reduces within neurogenic substrates. This is consistent with experimental studies and numerical works recently published by the same authors. However, in all cases the magnitude of the net traction force considerably increases at the instant of cell proliferation because of cell-cell interaction.

CONCLUSIONS

The present model provides new perspectives to delineate the role of force-induced substrates in remotely controlling the cell fate during cell-matrix interaction, which open the door for new tissue regeneration methodologies.

Comparative study of the in vitro interaction of two fibroblast cell lines with a polyalkyl-imide hydrogel

The in vitro effects of polyalkyl-imide hydrogel (PAI) containing 96% pyrogen-free water on the viability, apoptosis, cell shape and metabolic activities of murine 3T3 and human Detroit 555 fibroblasts were investigated. Analysis of the viscous-elastic properties and the ultrastructure of PAI, performed by rheometer and AFM respectively, showed that the material has the typical characteristics of hydrogel, including a three-dimensional configuration of molecules arranged in a regular network with many discrete caveolae where most of the water is captured. Hydrogel biocompatibility was found to be high for both cell lines, with some differences. Cell viability decreased more in 3T3 cells than Detroit 550 fibroblasts when cultured in the presence of 100 mg/ml hydrogel but not at concentrations of 25 and 50 mg/ml hydrogel. The period of incubation with PAI (24 and 48 h) only partially affected cell viability. Apoptosis, most likely due to cells' inability to adhere to the polymer, was the only type of cell death observed. Fibroblasts grown in the presence of polymer were always metabolically active since they continued to synthesize collagen. In conclusion, PAI hydrogel, even at high concentrations, was biocompatible for both fibroblasts, but in particular for human cells, thus encouraging its use as a dermal filler.

Vascular cell viability on polyvinyl alcohol hydrogels modified with water-soluble and -insoluble chitosan

Polyvinyl alcohol (PVA) hydrogels blended with chitosan or other biological macromolecules have shown promise for cell culture and tissue engineering. This study investigates the attachment and growth of bovine aortic endothelial (BAEC) and smooth muscle cells (BASMC) on the PVA hydrogels modified with water soluble and water insoluble chitosan. Cell adhesion on the surface of the membranes was examined by phase contrast microscopy while cell morphologies were studied using immunocytochemistry staining with EC and SMC specific biomarkers (F-actin and alpha actin respectively). Cells cultured on 6% PVA, 0.4% chitosan (water soluble and insoluble) hydrogel membranes displayed excellent adhesion and spreading characteristics, in addition to negligible cell structural morphological changes in comparison to a polystyrene control. Similar vascular cell adhesion features were apparent on PVA membranes blended with water-soluble and -insoluble chitosan. Fluorescent activated cell sorter (FACS) analysis was used to determine BAEC and BASMC proliferation and cell viability. Apoptotic levels in BAEC after 7 days were 12.8% +/- 2.5% on the PVA- chitosan WS-1 membrane and 10.1% +/- 1.5% on the control well (n = 3) while comparable results were also noted for BASMC. Equivalent proliferative activity was apparent for BAEC on the control and PVA-chitosan membrane after 7 days, while BASMC showed increased proliferative activity on the membranes. These results indicate that the PVA-chitosan blended hydrogel membranes show promise for cell culture and tissue engineering applications.

In vitro study of the interaction of polyalkilimide and polyvinyl alcohol hydrogels with cells

Hydrogels are a class of polymers that in the last decade have had a great development and application for soft tissue augmentation, due to their similarity to this tissue for their high water content. The in vitro effects of polyalkylmide hydrogel (pAI) and polyvinyl alcohol hydrogel (pVOH) on human lymphocytes and U937 cells viability, apoptosis and cell shape were investigated. Cell viability was always higher than 70%, thus showing the hydrogels were not cytotoxic for both cell lines. Some differences were, however, found. At short time, lymphocytes were very sensitive to the hydrogels incubation, while at long time, U937 cells were the most sensitive cells. Other differences on cell viability were related to the time of incubation, to the type of hydrogel and to the polymers concentration. Cell viability decreased only at the longest time of incubation and with the highest hydrogel concentration. Accordingly, cell death by apoptosis increased; necrosis was never observed in the cultures. Concentration- and hydrogel-dependent modifications of cell shape (bigger cell volume, elongations of cells) were observed in a few percentage of viable cells. In conclusion, the very high in vitro degree of biocompatibility shown by both hydrogels encourages their use as dermal fillers.

In vitro andin vivo biocompatibility evaluation of a polyalkylimide hydrogel for soft tissue augmentation

Injectable fillers are commonly used in Plastic and Reconstructive Surgery to correct serious and slight aesthetic defects due to their low invasiveness and an easy implant technique procedure. Synthetic hydrogels are proposed as filler materials for their similarity with soft tissue and to avoid many disadvantages of naturally derived materials such as short persistence, allergenicity, and immunogenicity. Our studies are focused on the biocompatibility evaluation of a polyacrylic hydrogel containing alkylimide-amide groups and pyrogen free water (96%) (Bio-Alcamid by means of the in vitro cytotoxicity and mutagenicity assays and the in vivo skin irritation, sensitization test, and subcutaneous implant. All tests conducted on Bio-Alcamid showed no toxicity. It is a substance easy to inject and remove; it does not migrate, and its safety allows it to be a suitable filler for the correction of slight and also very serious aesthetic defects.

Plasma surface modification of artificial corneas for optimal epithelialization

We have demonstrated that the optimal surface treatment of a polyvinylalcoholcopolymer hydrogel for epithelial cell migration and proliferation is an argon radio frequency (rf) plasma treatment. The surface chemistry of the material was determined prior to each cellular evaluation, allowing us to compare the biological response with a known surface chemistry. The cellular response was carried out in a consistent manner a minimum of three separate runs. We found that the optimal conditions required culturing the cells under constant rotation. Cells became confluent on argon-plasma-treated surfaces coated under several different reactions pressures, and after 2 weeks they became multilayered. Our experiments demonstrated that cells proliferated and extracellular matrix and adhesion proteins were present only when the surface was treated with an argon rf plasma; acetone- and ammonia-treated surfaces did not yield the desired results. Organ culture experiments further demonstrated the efficacy of the argon-treated surfaces. In these experiments, intact keratoprosthetic devices with modified hydrogel surfaces were implanted into rabbit corneas. The excised corneas containing the devices were cultured, and 3 weeks later, using confocal laser scanning microscopy, confluent epithelium was detected on the modified hydrogel surface. This is the first demonstration that rabbit limbal epithelial cells can migrate onto a synthetic cornea containing a modified hydrogel-treated surface and form a confluent surface of epithelium.

Distribution of F-actin, vinculin and integrin subunits (alpha 6 and beta 4) in response to corneal substrata

Our goal was to determine the early response of corneal epithelial cells to living modified stromal substrates. We examined the distribution of integrin subunits (alpha 6 and beta 4), vinculin and the organization of F-actin in epithelial cells after cell-matrix and cell-cell hypothesized that the distribution of proteins in the cell matrix attachment complex would be altered if the substrate was modified. Integrin subunits, alpha 6 and beta 4, were chosen as they play a role in cell matrix adhesion and adhesion site formation. Corneal epithelial cells were cultured from explants and seeded on three corneal substrates (a stroma containing an intact basal lamina, a cornea lacking a basal lamina and a cornea treated with alkali). After 3 h of incubation, the tissue was fixed and stained with monoclonal antibodies specific for vinculin and for the integrin subunits alpha 6 and beta 4. The organization of F-actin was assessed using rhodamine phalloidin. The localization of the proteins was recorded with confocal laser scanning microscopy. Filamentous actin delineated the lateral cell membranes of corneal epithelial cells. The organization of actin and distribution of vinculin and integrin subunits of epithelial cells cultured on stromal substrates containing a basal lamina mimicked a simple epithelial organization. In contrast, when cells are cultured on the substrate lacking a basal lamina and alkaline treated corneal substrates the distribution of the specific proteins examined was altered. Vinculin and alpha 6 were present along membranes of cells cultured on substrates lacking a basal lamina and were diffuse in cells cultured on the alkaline substrates. These studies demonstrate that changes in the distribution of adhesion and cytoskeletal proteins in response to different surfaces may contribute to the healing dynamics in different wounds.

Cell-seeding and in vitro biocompatibility evaluation of polymeric matrices of PEO/PBT copolymers and PLLA

A bilayered matrix has been evaluated in vitro as a carrier for autografts of cultured epidermal keratinocytes and dermal fibroblasts, to be used as a skin substitute in deep dermal skin defects. A poly-L-lactide (PLLA) and an elastomeric and biodegradable poly(ethyleneoxide)-poly(butyleneterephthalate)(PEO-PBT++ +)copolymer, called Polyactive, were chosen as the constituents of the matrix. The substrate properties of the bilayers for human and rat epidermal keratinocytes and dermal fibroblasts were assessed. Keratinocytes attached and expanded into confluent sheets on both the routine cell culture plastic (TCPS) and the experimental substrates. Morphology of the cells cultured on the biomaterials was found to be comparable with the morphology of those grown on TCPS. In contrast to dense films, porous PEO:PBT copolymer and PLLA appeared poor substrates for fibroblasts. Long-term (in vivo) degradation of the biomaterials was mimicked in vitro to screen the biomaterials for any release of toxic substances. Culturing keratinocytes and fibroblasts in media based on the artificially aged biomaterials did not result in any negative effects on proliferative activity or morphological appearance of the cells.