Plasticizing effect of acetylated castor oil on castor oil-based, moisture-cured polyurethane film

A Novel Microwave Hot Pressing Machine for Production of Fixed Oils from Different Biopolymeric Structured Tissues

A microwave hot pressing machine (MHPM) was used to heat the colander to produce fixed oils from each of castor, sunflower, rapeseed, and moringa seed and compared them to those obtained using an ordinary electric hot pressing machine (EHPM). The physical properties, namely the moisture content of seed (MCs), the seed content of fixed oil (S_cfo), the yield of the main fixed oil (Y_mfo), the yield of recovered fixed oil (Y_rfo), extraction loss (EL), six Efficiency of fixed oil extraction (E_foe), specific gravity (SG_fo), refractive index (RI) as well as chemical properties, namely iodine number (IN), saponification value (SV), acid value (AV), and the yield of fatty acid (Y_fa) of the four oils extracted by the MHPM and EHPM were determined. Chemical constituents of the resultant oil were identified using GC/MS after saponification and methylation processes. The Ymfo and SV obtained using the MHPM were higher than those for the EHPM for all four fixed oils studied. On the other hand, each of the SG_fo, RI, IN, AV, and pH of the fixed oils did not alter statistically due to changing the heating tool from electric band heaters into a microwave beam. The qualities of the four fixed oils extracted by the MHPM were very encouraging as a pivot of the industrial fixed oil projects compared to the EHPM. The prominent fatty acid of the castor fixed oil was found to be ricinoleic acid, making up 76.41% and 71.99% contents of oils extracted using the MHPM and EHPM, respectively. In addition, the oleic acid was the prominent fatty acid in each of the fixed oils of sunflower, rapeseed, and moringa species, and its yield by using the MHPM was higher than that for the EHPM. The role of microwave irradiation in facilitating fixed oil extrusion from the biopolymeric structured organelles (lipid bodies) was protruded. Since it was confirmed by the present study that using microwave irradiation is simple, facile, more eco-friendly, cost-effective, retains parent quality of oils, and allows for the warming of bigger machines and spaces, we think it will make an industrial revolution in oil extraction field.

Biobased Waterborne Polyurethane-Urea/SWCNT Nanocomposites for Hydrophobic and Electrically Conductive Textile Coatings

Waterborne polyurethane-urea dispersions (WPUD), which are based on 100% bio-based semi-crystalline polyester polyol and isophorone diisocyanate, have been successfully synthesized and doped with single-walled carbon nanotubes (SWCNT) to obtain a finishing agent that provides textiles with multifunctional properties. The chemical structure of WPUD has been characterized by Fourier-transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR). The thermal properties have been evaluated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and dynamic mechanical thermal analysis (DMTA). Mechanical properties have been studied by tensile stress-strain analysis. Moreover, the particle size, particle size distribution (PSD), and stability of developed waterborne dispersions have been assessed by dynamic light scattering (DLS), Z-potential, and accelerated aging tests (analytical centrifugation). Subsequently, selected fabrics have been face-coated by the WPUD using knife coating method and their properties have been assessed by measuring water contact angle (WCA), water column, fabric stiffness, and air permeability. The electrical conductivity of textiles coated with SWCNT-doped WPUD has been evaluated by EN 1149 standard. Finally, the surface morphologies of uncoated and coated fabrics have been studied by scanning electron microscopy (SEM). All of the synthesized polyurethane-ureas provide the coated substrates with remarkable water-repellency and water column, being therefore a more sustainable alternative to waterproof coatings based on fluoropolymers, such as PTFE. The additivation of the polymeric matrices with SWCNT has led to textile coatings with excellent electrical conductivity, maintaining water column properties, giving rise to multifunctional coatings that are highly demanded in protective workwear and technical textiles.

Polymers and Composites Derived from Castor Oil as Sustainable Materials and Degradable Biomaterials: Current Status and Emerging Trends

Recent years have seen rapid growth in utilizing vegetable oils to derive a wide variety of polymers to replace petroleum-based polymers for minimizing environmental impact. Nonedible castor oil (CO) can be extracted from castor plants that grow easily, even in an arid land. CO is a promising source for developing several polymers such as polyurethanes, polyesters, polyamides, and epoxy-polymers. Several synthesis routes have been developed, and distinct properties of polymers have been studied for industrial applications. Furthermore, fillers and fibers, including nanomaterials, have been incorporated in these polymers for enhancing their physical, thermal, and mechanical properties. This review highlights the development of CO-based polymers and their composites with attractive properties for industrial and biomedical applications. Recent advancements in CO-based polymers and their composites are presented along with a discussion on future opportunities for further developments in diverse applications.