A study of the interactions between an IgG-binding domain based on the B domain of staphylococcal protein A and rabbit IgG

Facile Purification and Use of Tobamoviral Nanocarriers for Antibody-Mediated Display of a Two-Enzyme System

Immunosorbent turnip vein clearing virus (TVCV) particles displaying the IgG-binding domains D and E of Staphylococcus aureus protein A (PA) on every coat protein (CP) subunit (TVCVPA) were purified from plants via optimized and new protocols. The latter used polyethylene glycol (PEG) raw precipitates, from which virions were selectively re-solubilized in reverse PEG concentration gradients. This procedure improved the integrity of both TVCVPA and the wild-type subgroup 3 tobamovirus. TVCVPA could be loaded with more than 500 IgGs per virion, which mediated the immunocapture of fluorescent dyes, GFP, and active enzymes. Bi-enzyme ensembles of cooperating glucose oxidase and horseradish peroxidase were tethered together on the TVCVPA carriers via a single antibody type, with one enzyme conjugated chemically to its Fc region, and the other one bound as a target, yielding synthetic multi-enzyme complexes. In microtiter plates, the TVCVPA-displayed sugar-sensing system possessed a considerably increased reusability upon repeated testing, compared to the IgG-bound enzyme pair in the absence of the virus. A high coverage of the viral adapters was also achieved on Ta2O5 sensor chip surfaces coated with a polyelectrolyte interlayer, as a prerequisite for durable TVCVPA-assisted electrochemical biosensing via modularly IgG-assembled sensor enzymes.

New insights into the effect of mutations on affibody-Fc interaction, a molecular dynamics simulation approach

Staphylococcal protein A (SpA) domain B (the basis of affibody) has been widely used in affinity chromatography and found therapeutic applications against inflammatory diseases through targeting the Fc part of immunoglobulin G (IgG). We have performed extensive molecular dynamics simulation of 41 SpA mutants and compared their dynamics and conformations to wild type. The simulations revealed the molecular details of structural and dynamics changes that occurred due to introducing point mutations and helped to explain the SPR results. It was observed in some variants a point mutation caused extensive structural changes far from the mutation site, while an effect of some other mutations was limited to the site of the mutated residue. Also, the pattern of hydrogen bond networks and hydrophobic core arrangements were investigated. We figured out mutations that occurred at positions 128, 136, 150 and 153, affected two hydrophobic cores at the interface as well as mutations introduced at positions 129 and 154 interrupted two hydrogen bond networks of the interface, SPR data showed all of these mutations reduced binding affinity significantly. Overall, by scanning the SpA-Fc interface through the large numbers of introduced mutations, the new insights have been gained which would help to design high- affinity ligands of IgG.

Protein A-Nanoluciferase fusion protein for generalized, sensitive detection of immunoglobulin G

Detection and quantification of antibodies, especially immunoglobulin G (IgG), is a cornerstone of ELISAs, many diagnostics, and the development of antibody-based drugs. Current state-of-the-art immunoassay techniques for antibody detection require species-specific secondary antibodies and carefully-controlled bioconjugations. Poor conjugation efficiency degrades assay performance and increases the risk of clinical false positives due to non-specific binding. We developed a generic, highly-sensitive platform for IgG quantification by fusing the IgG-Fc binding Z domain of Staphylococcal Protein A with the ultrabright bioluminescence reporter Nanoluc-luciferase (Nluc). We demonstrated the application of this fusion protein in a sandwich IgG detection immunoassay using surface-bound antigens to capture target IgG and protein A-Nanoluc fusion as the detector. We optimized the platform's sensitivity by incorporating multiple repeats of the Z domain into the fusion protein constructs. Using rabbit and mouse anti-SARS-CoV-2 Nucleoprotein IgGs as model analytes, we performed ELISAs in two different formats, either with SARS-CoV-2 Nucleoprotein as the capture antigen or with polyclonal chicken IgY as the capture antibody. Using standard laboratory equipment, the platform enabled the quantitation of antibody analytes at concentrations as low as 10 pg/mL (67 fM).

Synthesis and Surface Modification of Nanostructured F-Doped ZnO: Toward a Transducer for Label-Free Optical Biosensing

In this work, the surface of nanostructured fluorine-doped ZnO (nZnO·F) is functionalized with protein A (PrA), and used as a model biomolecule. The chemical procedure is characterized by several analytical techniques such as Fourier Transform Infrared Spectroscopy, water contact angle analysis, and fluorescence microscopy. The surface modification of nZnO·F by binding increasing concentrations of PrA is also investigated by two label-free optical techniques, i.e., the spectroscopic reflectometry and the steady-state photoluminescence. The results are compared with those obtained using undoped nZnO substrates in order to highlight the better performances of nZnO·F due to the fluorine doping. The results of this study pave the way for the design and realization of a ZnO-based nanostructured platform for label-free optical sensing.

Real-time biodetection using a smartphone-based dual-color surface plasmon resonance sensor

We proposed a compact and cost-effective red-green dual-color fiber optic surface plasmon resonance (SPR) sensor based on the smartphone. Inherent color selectivity of phone cameras was utilized for real-time monitoring of red and green color channels simultaneously, which can reduce the chance of false detection and improve the sensitivity. Because there are no external prisms, complex optical lenses, or diffraction grating, simple optical configuration is realized. It has a linear response in a refractive index range of 1.326 to 1.351 (R2  =  0.991) with a resolution of 2.3  ×  10  -  4  RIU. We apply it for immunoglobulin G (IgG) concentration measurement. Experimental results demonstrate that a linear SPR response was achieved for IgG concentrations varying from 0.02 to 0.30  mg  /  ml with good repeatability. It may find promising applications in the fields of public health and environment monitoring owing to its simple optics design and applicability in real-time, label-free biodetection.

Protein Complexes and Virus-Like Particle Technology

Virus-like particle (VLP) technologies are based on virus-inspired artificial structures and the intrinsic ability of viral proteins to self-assemble at controlled conditions. Therefore, the basic knowledge about the mechanisms of viral particle formation is highly important for designing of industrial applications. As an alternative to genetic and chemical processes, different physical methods are frequently used for VLP construction, including well characterized protein complexes for introduction of foreign molecules in VLP structures.This chapter shortly discusses the mechanisms how the viruses form their perfectly ordered structures as well as the principles and most interesting application examples, how to exploit the structural and assembly/disassembly properties of viral structures for creation of new nanomaterials.

Self-assembled protein nanocarrier for intracellular delivery of antibody

Despite the great potential of antibodies as intracellular therapeutics, there is a significant, unmet challenge in delivering sufficient amounts of folded antibodies inside cells. We describe an all-protein self-assembled nanocarrier capable of delivering functional antibodies to the cytosol. By combining an α-helical peptide that self-assembles into a hexameric coiled-coil bundle and an Fc-binding Protein A fragment, we generated the Hex nanocarrier that is efficiently internalized by cells without cytotoxicity. Localization of multiple Fc-binding domains on the hexameric core allowed the Hex nanocarrier to tightly bind antibody with sub-nanomolar affinity regardless of pH and the antibody's originating species. The size of the Hex nanocarrier ranges from 25 to 35nm depending on the antibody loading ratio. We demonstrated the capacity of the Hex nanocarrier to deliver functional antibodies to the cytosol by employing anti-β-tubulin or anti-nuclear pore complex antibody as cargo. The design of the Hex nanocarrier is modular, which enables functionalization beyond Fc-binding. We exploited this feature to improve the cytosolic delivery efficiency of the Hex nanocarrier by addition of an endosomolytic motif to the core. The modified Hex nanocarrier exhibited similar antibody-binding behavior, but delivered more antibodies to their cytosolic targets at a faster rate. This work demonstrates an efficient intracellular antibody delivery platform with significant advantages over existing approaches as it does not require modification of the antibody, is biodegradable, and has an antibody to carrier mass ratio of 13, which is greater than other reported antibody carriers.

Protein Complex Purification by Affinity Capture

Affinity capture has become a powerful technique for consistently purifying endogenous protein complexes, facilitating biochemical and biophysical assays on otherwise inaccessible biological assemblies, and enabling broader interactomic exploration. For this procedure, cells are broken and their contents separated and extracted into a solvent, permitting access to target macromolecular complexes thus released in solution. The complexes are specifically enriched from the extract onto a solid medium coupled with an affinity reagent-usually an antibody-that recognizes the target either directly or through an appended affinity tag, allowing subsequent characterization of the complex. Here, we discuss approaches and considerations for purifying endogenous yeast protein complexes by affinity capture.

Affinity proteomics to study endogenous protein complexes: pointers, pitfalls, preferences and perspectives

Dissecting and studying cellular systems requires the ability to specifically isolate distinct proteins along with the co-assembled constituents of their associated complexes. Affinity capture techniques leverage high affinity, high specificity reagents to target and capture proteins of interest along with specifically associated proteins from cell extracts. Affinity capture coupled to mass spectrometry (MS)-based proteomic analyses has enabled the isolation and characterization of a wide range of endogenous protein complexes. Here, we outline effective procedures for the affinity capture of protein complexes, highlighting best practices and common pitfalls.

Engineered protein A ligands, derived from a histidine-scanning library, facilitate the affinity purification of IgG under mild acidic conditions

Background

In antibody purification processes, the acidic buffer commonly used to elute the bound antibodies during conventional affinity chromatograph, can damage the antibody. Herein we describe the development of several types of affinity ligands which enable the purification of antibodies under much milder conditions.

Results

Staphylococcal protein A variants were engineered by using both structure-based design and combinatorial screening methods. The frequency of amino acid residue substitutions was statistically analyzed using the sequences isolated from a histidine-scanning library screening. The positions where the frequency of occurrence of a histidine residue was more than 70% were thought to be effective histidine-mutation sites. Consequently, we identified PAB variants with a D36H mutation whose binding of IgG was highly sensitive to pH change.

Conclusion

The affinity column elution chromatograms demonstrated that antibodies could be eluted at a higher pH (∆pH**≧2.0) than ever reported (∆pH = 1.4) when the Staphylococcal protein A variants developed in this study were used as affinity ligands. The interactions between Staphylococcal protein A and IgG-Fab were shown to be important for the behavior of IgG bound on a SpA affinity column, and alterations in the affinity of the ligands for IgG-Fab clearly affected the conditions for eluting the bound IgG. Thus, a histidine-scanning library combined with a structure-based design was shown to be effective in engineering novel pH-sensitive proteins.

Alternative downstream processes for production of antibodies and antibody fragments

Protein-A or Protein-L affinity chromatography and virus inactivation are key processes for the manufacturing of therapeutic antibodies and antibody fragments. These two processes often involve exposure of therapeutic proteins to denaturing low pH conditions. Antibodies have been shown to undergo conformational changes at low pH, which can lead to irreversible damages on the final product. Here, we review alternative downstream approaches that can reduce the degree of low pH exposure and consequently damaged product. We and others have been developing technologies that minimize or eliminate such low pH processes. We here cover facilitated elution of antibodies using arginine in Protein-A and Protein-G affinity chromatography, a more positively charged amidated Protein-A, two Protein-A mimetics (MEP and Mabsorbent), mixed-mode and steric exclusion chromatography, and finally enhanced virus inactivation by solvents containing arginine. This article is part of a Special Issue entitled: Recent advances in molecular engineering of antibody.

Structure-based histidine substitution for optimizing pH-sensitive Staphylococcus protein A

Optimizing antibody purification is crucial to overcoming a bottleneck in the costly manufacturing process for antibody therapy. To address this issue, we designed a pH-sensitive Staphylococcus aureus protein A variant that retained its innate stability and affinity toward antibody. On the basis of structural information and mutation analysis data, we identified candidate positions for accumulative histidine substitutions to cause electrostatic repulsion under acidic conditions. The histidine substitutions effectively decreased the dissociation rate under acidic conditions by three orders of magnitude. Avoiding deleterious effects of the substitutions, we successfully engineered a protein A variant that exhibited high pH sensitivity and maintained affinity, thermal stability, and alkaline tolerance. The variant was capable of serving as an affinity ligand that made affinity chromatography under milder acidic conditions possible; the elution peak shifted from pH 4.2 to 5.6. Only two substitutions were needed to achieve this pH sensitivity. This structure-based approach is applicable to other protein-based ligands.

Improved native isolation of endogenous Protein A-tagged protein complexes

Here we report a modified peptide reagent useful for the rapid, native elution of protein complexes containing a Protein-A-tagged component. We tested this reagent for the elution of tagged endogenous protein complexes from yeast (Nup53p/Nup170p dimer; Nup1p/Kap95p/Kap60p trimer; pentameric GINS complex) and bacteria (RNAP holoenzyme). The majority of the affinity-isolated material is released within 15 minutes under mild conditions, and the elution reagent itself is readily depleted from the elution mixture by simple spin column gel filtration. This reagent is ideal for eluting protein complexes after Protein A / IgG affinity isolation when protease cleavage is not possible or not desirable and facile depletion of the elution reagent is needed.

Importance of Context in Protein Folding: Secondary Structural Propensities versus Tertiary Contact-Assisted Secondary Structure Formation

Molecular dynamics simulations can be used to reveal the detailed conformational behaviors of peptides and proteins. By comparing fragment and full-length protein simulations, we can investigate the role of each peptide segment in the folding process. Here, we take advantage of information regarding the helix formation process from our previous simulations of barnase and protein A as well as new simulations of four helical fragments from these proteins at three different temperatures, starting with both helical and extended structures. Segments with high helical propensity began the folding process by tethering the chain through side chain interactions involving either polar interactions, such as salt bridges, or hydrophobic staples. These tethers were frequently nonnative (i.e., not i --> i + 4 spacing) and provided a scaffold for other residues, thereby limiting the conformational search. The helical structure then propagated on both sides of the tether. Segments with low stability and propensity formed later in the folding process and utilized contacts with other portions of the protein when folding. These helices formed via a tertiary contact-assisted mechanism, primarily via hydrophobic contacts between residues distant in sequence. Thus, segments with different helical propensities appear to play different roles during protein folding. Furthermore, the active role of nonlocal side chains in helix formation highlights why we must move beyond simple hierarchical models of protein folding.

Elution of antibodies from a Protein-A column by aqueous arginine solutions

Acidic pH is commonly used to elute antibodies from Protein-A affinity column, although low pH may result in aggregation of the proteins. As an alternative, here arginine was tested as an eluent and compared with a more conventional eluent of citrate. Using purified monoclonal antibodies, recovery of antibodies with 0.1M citrate, pH 3.8, was less than 50% and decreased further as the pH was increased to 4.3. At the same pH, the recovery of antibodies was greatly increased with 0.5M arginine and more so with 2M arginine. Even at pH 5.0, 2M arginine resulted in 31% recovery, although the elution under such condition showed extensive tailing. Such tailing was observed at pH 3.8 when 0.1M citrate was used. Size exclusion analysis indicated that the eluted antibodies were mostly monomeric whether eluted with citrate or arginine. This demonstrates the usefulness of arginine as an efficient eluent for Protein-A chromatography.

Solution structure of an immunoactive peptide fragment of Staphylococcal protein-A

Staphylococcal protein-A (SpA) is known to bind the Fc fragment of immunoglobin G in vitro and induce a myriad of immunogenic responses in vivo. The latter is ascribed to be due to the interaction of Fc and SpA. It has also been proposed that in vivo proteolytically cleaved fragments of SpA may be functioning in the same manner. One such fragment (EQQNAFYEILHLPNLNEEQR), fragment 8-27 of the B-domain (SpA-B), was recently shown to exhibit in vivo immunogenic response [Sinha, P., Sengupta, J., and Ray, P. K. (1999) Biochem. Biophys. Res. Commun. 258, 141-147]. As a first step towards understanding the mode of interaction of this peptide with the Fc fragment, we have studied the solution conformation of this isolated peptide by CD and NMR. The peptide, with 7 contact residues in the crystal structure of the SpA-B/Fc complex and comprising of mostly helixI and part of helixII of the 3-helix bundle of SpA-B, was found to be present predominantly in extended structure. However it showed nascent turn/helix like conformations around F14 & Y15. These two residues are known to play a vital role in SpA-B/Fc interaction as deciphered from crystal structure and NMR studies of SpA-B/Fc complex and mutational studies. The implications of our results, especially the nascent conformations found around F14 & Y15, in design of SpA-B mimetic small molecules are discussed.