Advances in the science and technology of paints, inks and related coatings: 2006

Printability of calcium phosphate powders for three-dimensional printing of tissue engineering scaffolds

Three-dimensional printing (3DP) is a versatile method to produce scaffolds for tissue engineering. In 3DP the solid is created by the reaction of a liquid selectively sprayed onto a powder bed. Despite the importance of the powder properties, there has to date been a relatively poor understanding of the relation between the powder properties and the printing outcome. This article aims at improving this understanding by looking at the link between key powder parameters (particle size, flowability, roughness, wettability) and printing accuracy. These powder parameters are determined as key factors with a predictive value for the final 3DP outcome. Promising results can be expected for mean particle size in the range of 20-35 μm, compaction rate in the range of 1.3-1.4, flowability in the range of 5-7 and powder bed surface roughness of 10-25 μm. Finally, possible steps and strategies in pushing the physical limits concerning improved quality in 3DP are addressed and discussed.

Nanomechanical properties of mechanical double-layers: a novel semiempirical analysis

Force-displacement curves have been acquired with a commercial atomic force microscope on a thin film of poly(n-butyl methacrylate) on glass substrates. The film thickness is nonuniform, ranging in the measured area from 0 to 30 nm, and gives the possibility to survey the so-called "mechanical double-layer" topic, i.e., the influence of the substrate on the mechanical properties of the film in dependence of the film thickness. The stiffness and the deformation for each force-distance curve were determined and related to the film thickness. We were able to estimate the resolution of the film thickness that can be achieved by means of force-distance curves. By exploiting the data acquired in the present and in a previous experiment, a novel semiempirical approach to describe the mechanical properties of a mechanical double-layer is introduced. The mathematical model, with which deformation-force curves can be described, permits to calculate the Young's moduli of film and substrate in agreement with literature values and to determine the film thickness in agreement with the topography.