Microbial fuel-cells: Electricity production from carbohydrates

Review of cathodic electroactive bacteria: Species, properties, applications and electron transfer mechanisms

Cathodic electroactive bacteria (C-EAB) which are capable of accepting electrons from solid electrodes provide fresh avenues for pollutant removal, biosensor design, and electrosynthesis. This review systematically summarized the burgeoning applications of the C-EAB over the past decade, including 1) removal of nitrate, aromatic derivatives, and metal ions; 2) biosensing based on biocathode; 3) electrosynthesis of CH4, H2, organic carbon, NH3, and protein. In addition, the mechanisms of electron transfer by the C-EAB are also classified and summarized. Extracellular electron transfer and interspecies electron transfer have been introduced, and the electron transport mechanism of typical C-EAB, such as Shewanella oneidensis MR-1, has been combed in detail. By bringing to light this cutting-edge area of the C-EAB, this review aims to stimulate more interest and research on not only exploring great potential applications of these electron-accepting bacteria, but also developing steady and scalable processes harnessing biocathodes.

The performance of microbial fuel cell with sodium alginate and super activated carbon composite gel modified anode

Microbial fuel cells (MFCs) have the functions of wastewater treatment and power generation. The incorporation of modified anodes enhances the sustainable power generation performance of MFCs. In this study, to evaluate the feasibility of sodium alginate (SA) as a biocompatible binder, hydrogel mixed with super activated carbon (SAC) and SA was modified the carbon cloth anode of MFC. The results showed that the maximum output voltage in the SAC/SA hydrogel modified anode MFC was 0.028 V, which was increased by 115%, compared with the blank carbon cloth anode. The internal resistance of MFC was 9429 Ω, which was 18% lower than that of control (11560 Ω). The maximum power density was 6.14 mW/m2, which was increased by 365% compared to the control. After modification of SAC/SA hydrogel, the chemical oxygen demand (COD) removal efficiency reached to 56.36% and was 12.72% higher than the control. Coulombic efficiency with modified anode MFC reached 17.65%, which was increased by 104%, compared with the control. Our findings demonstrate the feasibility of utilizing SA as a biocompatible binder for anode modification, thereby imparting sustainable and enhanced power generation performance to MFCs. This study presented a new selectivity for harnessing algal bioresources and improving anode binders in future MFC applications.

A review of microbial fuel cell and its diversification in the development of green energy technology

The advancement of microbial fuel cell technology is rapidly growing, with extensive research and well-established methodologies for enhancing structural performance. This terminology attracts researchers to compare the MFC devices on a technological basis. The architectural and scientific successes of MFCs are only possible with the knowledge of engineering and technical fields. This involves the structure of MFCs, using substrates and architectural backbones regarding electrode advancement, separators and system parameter measures. Knowing about the MFCs facilitates the systematic knowledge of engineering and scientific principles. The current situation of rapid urbanization and industrial growth is demanding the augmented engineering goods and production which results in unsolicited burden on traditional wastewater treatment plants. Consequently, posing health hazards and disturbing aquatic veracity due to partial and untreated wastewater. Therefore, it's sensible to evaluate the performance of MFCs as an unconventional treatment method over conventional one to treat the wastewater. However, MFCs some benefits like power generation, stumpy carbon emission and wastewater treatment are the main reasons behind the implementation. Nonetheless, few challenges like low power generation, scaling up are still the major areas needs to be focused so as to make MFCs sustainable one. We have focused on few archetypes which majorities have been laboratory scale in operations. To ensure the efficiency MFCs are needed to integrate and compatible with conventional wastewater treatment schemes. This review intended to explore the diversification in architecture of MFCs, exploration of MFCs ingredients and to provide the foreseen platform for the researchers in one source, so as to establish the channel for scaling up the technology. Further, the present review show that the MFC with different polymer membranes and cathode and anode modification presents significant role for potential commercial applications after change the system form prototype to pilot scale.

Nano-hydroxyapatite/carbon nanotube: An excellent anode modifying material for improving the power output and diclofenac sodium removal of microbial fuel cells

Anode material and surface properties have a crucial impact on the performance of MFCs. Designing and fabricating various modified carbon-based anodes with functional materials is an effective strategy to improve anode performance in MFCs. Anode materials with excellent bioaffinity can promote bacterial attachment, growth, and extracellular electron transfer. In this study, positively charged nano hydroxyapatite (nHA) with remarkable biocompatibility combined with carbon nanotubes (CNTs) with unique structure and high conductivity were used as anode modifying material. The nHA/CNTs modified carbon brush (CB) exhibited improved bacteria adsorption capacity, electrochemical activity and reticular porous structure, thus providing abundant sites and biocompatible microenvironment for the attachment and growth of functional microbial and accelerating extracellular electron transfer. Consequently, the nHA/CNTs/CB-MFCs achieved the maximum power density of 4.50 ± 0.23 mW m-2, which was 1.93 times higher than that of the CB-MFCs. Furthermore, diclofenac sodium (DS), which is a widely used anti-inflammatory drug and is also a persistent toxic organic pollutant constituting a serious threat to public health, was used as the model organic pollutant. After 322 days of long-term operation, enhanced diclofenac sodium removal efficiency and simultaneous bioelectricity generation were realized in nHA/CNTs/CB-MFCs, benefiting from the mature biofilm and the diverse functional microorganisms revealed by microbial community analysis. The nHA/CNTs/CB anode with outstanding bioaffinity, electrochemical activity and porous structure presents great potential for the fabrication of high-performance anodes in MFCs.

Power generation from wastewater using microbial fuel cells: A review

As the world grapples with an imminent energy crisis brought on by the depletion of nonrenewable resources, such as petroleum, the necessity for alternative and eco-friendly power sources becomes increasingly apparent. In this regard harnessing knowledge gained from natural microorganisms to produce electricity using economical substrates is a promising solution through microbial fuel cells (MFCs). Microbial fuel cells leverage microbes' catabolic abilities to break down organic matter and release electrons that are subsequently transported across an external circuit for electricity generation. This article delves into the fundamental components involved in MFC construction and explores crucial factors that impact their performance including substrate oxidation, electron transfer, and internal resistance. Additionally, it offers a comprehensive analysis of existing microbial fuel cell designs while highlighting their respective strengths and weaknesses. Finally, the article showcases cost-effective MFC models based on thorough studies conducted worldwide while illuminating potential practical applications of this renewable energy technology.

The race between classical microbial fuel cells, sediment-microbial fuel cells, plant-microbial fuel cells, and constructed wetlands-microbial fuel cells: Applications and technology readiness level

Microbial fuel cell (MFC) is an interesting technology capable of converting the chemical energy stored in organics to electricity. It has raised high hopes among researchers and end users as the world continues to face climate change, water, energy, and land crisis. This review aims to discuss the journey of continuously progressing MFC technology from the lab to the field so far. It evaluates the historical development of MFC, and the emergence of different variants of MFC or MFC-associated other technologies such as sediment-microbial fuel cell (S-MFC), plant-microbial fuel cell (P-MFC), and integrated constructed wetlands-microbial fuel cell (CW-MFC). This review has assessed primary applications and challenges to overcome existing limitations for commercialization of these technologies. In addition, it further illustrates the design and potential applications of S-MFC, P-MFC, and CW-MFC. Lastly, the maturity and readiness of MFC, S-MFC, P-MFC, and CW-MFC for real-world implementation were assessed by multicriteria-based assessment. Wastewater treatment efficiency, bioelectricity generation efficiency, energy demand, cost investment, and scale-up potential were mainly considered as key criteria. Other sustainability criteria, such as life cycle and environmental impact assessments were also evaluated.

Electroactive Bacteria in Natural Ecosystems and Their Applications in Microbial Fuel Cells for Bioremediation: A Review

Electroactive bacteria (EAB) are natural microorganisms (mainly Bacteria and Archaea) living in various habitats (e.g., water, soil, sediment), including extreme ones, which can interact electrically each other and/or with their extracellular environments. There has been an increased interest in recent years in EAB because they can generate an electrical current in microbial fuel cells (MFCs). MFCs rely on microorganisms able to oxidize organic matter and transfer electrons to an anode. The latter electrons flow, through an external circuit, to a cathode where they react with protons and oxygen. Any source of biodegradable organic matter can be used by EAB for power generation. The plasticity of electroactive bacteria in exploiting different carbon sources makes MFCs a green technology for renewable bioelectricity generation from wastewater rich in organic carbon. This paper reports the most recent applications of this promising technology for water, wastewater, soil, and sediment recovery. The performance of MFCs in terms of electrical measurements (e.g., electric power), the extracellular electron transfer mechanisms by EAB, and MFC studies aimed at heavy metal and organic contaminant bioremediationF are all described and discussed.

Isolation and Characterisation of Electrogenic Bacteria from Mud Samples

To develop efficient microbial fuel cell systems for green energy production using different waste products, establishing characterised bacterial consortia is necessary. In this study, bacteria with electrogenic potentials were isolated from mud samples and examined to determine biofilm-formation capacities and macromolecule degradation. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry identifications have revealed that isolates represented 18 known and 4 unknown genuses. They all had the capacities to reduce the Reactive Black 5 stain in the agar medium, and 48 of them were positive in the wolfram nanorod reduction assay. The isolates formed biofilm to different extents on the surfaces of both adhesive and non-adhesive 96-well polystyrene plates and glass. Scanning electron microscopy images revealed the different adhesion potentials of isolates to the surface of carbon tissue fibres. Eight of them (15%) were able to form massive amounts of biofilm in three days at 23 °C. A total of 70% of the isolates produced proteases, while lipase and amylase production was lower, at 38% and 27% respectively. All of the macromolecule-degrading enzymes were produced by 11 isolates, and two isolates of them had the capacity to form a strong biofilm on the carbon tissue one of the most used anodic materials in MFC systems. This study discusses the potential of the isolates for future MFC development applications.

A laboratory experiment for science courses: Sedimentary microbial fuel cells

Nowadays there is a concern to improve the quality of education by including an interdisciplinary approach of concepts and their integration in the curriculum of scientific disciplines. The development of microbial fuel cells as a potential alternative for production of renewable energies gives undergraduate students the challenge of integrating interdisciplinary concepts in a hot topic of global interest as alternative energies. We present a laboratory experiment that has been part of a third-year undergraduate course in biology where students gained experience in assembling microbial fuel cells and the understanding of how they work. In this process, the students could integrate biological, biochemical, and electric concepts. In addition, the acquisition of manual skills and experimental design decisions are important for the development of future professionals.

Nitrogen Removal from the High Nitrate Content Saline Denitration Solution of a Coal-Fired Power Plant by MFC

Oxidation denitration is one of the most efficient ways to remove NOx from flue gas in a coal-fired power plant. However, this oxidation denitration produces saline solution containing a high concentration of nitrate, which needs to be well treated. In this paper, MFC was firstly used to treat the high nitrate content saline denitration solution from ozone oxidation denitration of a coal-fired power plant. The influences of chemical oxygen demand (COD) and initial nitrate concentration on the nitrate removal and electricity generation of MFC were investigated by sequencing batch mode. The results showed that using MFCs could efficiently remove nitrate from coal-fired power plant saline denitration solution with nitrate nitrogen (NO3−-N) concentration up to 1510 mg/L. The average nitrate nitrogen removal rate was as high as 248.3 mg/(L·h) at initial nitrate nitrogen concentration of 745 mg/L and COD concentration of 6.5 g/L, which was eight times as high as that of the conventional biological method. Furthermore, the MFC required an average COD consumption of 3.42 g/g-NO3−-N which was lower than most of the conventional biological methods. In addition, MFC could produce a maximum power density of 241.1 mW/m2 while treating this saline denitration solution.

Isolation, Identification and Characteristic Analysis of Plant Endophyte Electrogenic Bacteria Shinella zoogloeoides SHE10

Electroactive microorganisms play a significant role in microbial fuel cells (MFCs). These devices are environmentally friendly and can turn large quantities of organic material into renewable energy based on microbial diversity. Based on broad microbial diversity, it is necessary to obtain a comprehensive understanding of their resource distribution and to discover potential resources. In this study, sweet potato tissues were selected to isolate endophytic bacteria, and the electrochemical activity potential of those bacteria was evaluated by high-throughput screening with a WO₃ nanoprobe. This study was screened and obtained a strain SHE10 with electrochemical performance from the rhizome of sweet potato by a WO₃ nanoprobe, which was identified as Shinella zoogloeoides. After nearly 600 h of voltage monitoring and cyclic voltammetry analysis, the results showed that the average voltage of S. zoogloeoides SHE10 reached 122.5 mV in stationary period. The maximum power density is 78.3 ± 1.8 mW/m², and the corresponding current density is 223.0 mA/m². The good redox reaction also indicated that the strain had good electrical activity. Its electron transfer mode was diverse, but its power generation mechanism still needs to be further discussed. The study of S. zoogloeoides SHE10 provides scientific theoretical reference for expanding the resource pool of electroproducing bacteria and the types of electroproducing microorganisms.

A Short Overview of Biological Fuel Cells

This short review summarizes the improvements on biological fuel cells (BioFCs) with or without ionomer separation membrane. After a general introduction about the main challenges of modern energy management, BioFCs are presented including microbial fuel cells (MFCs) and enzymatic fuel cells (EFCs). The benefits of BioFCs include the capability to derive energy from waste-water and organic matter, the possibility to use bacteria or enzymes to replace expensive catalysts such as platinum, the high selectivity of the electrode reactions that allow working with less complicated systems, without the need for high purification, and the lower environmental impact. In comparison with classical FCs and given their lower electrochemical performances, BioFCs have, up to now, only found niche applications with low power needs, but they could become a green solution in the perspective of sustainable development and the circular economy. Ion exchange membranes for utilization in BioFCs are discussed in the final section of the review: they include perfluorinated proton exchange membranes but also aromatic polymers grafted with proton or anion exchange groups.

Overview of electroactive microorganisms and electron transfer mechanisms in microbial electrochemistry

Electroactive microorganisms acting as microbial electrocatalysts have intrinsic metabolisms that mediate a redox potential difference between solid electrodes and microbes, leading to spontaneous electron transfer to the electrode (exo-electron transfer) or electron uptake from the electrode (endo-electron transfer). These microbes biochemically convert various organic and/or inorganic compounds to electricity and/or biochemicals in bioelectrochemical systems (BESs) such as microbial fuel cells (MFCs) and microbial electrosynthesis cells (MECs). For the past two decades, intense studies have converged to clarify electron transfer mechanisms of electroactive microbes in BESs, which thereby have led to improved bioelectrochemical performance. Also, many novel exoelectrogenic eukaryotes as well as prokaryotes with electroactive properties are being continuously discovered. This review presents an overview of electroactive microorganisms (bacteria, microalgae and fungi) and their exo- and endo-electron transfer mechanisms in BESs for optimizing and advancing bioelectrochemical techniques.

Recent Progress and Prospects in Catalytic Water Treatment

Presently, conventional technologies in water treatment are not efficient enough to completely mineralize refractory water contaminants. In this context, the implementation of catalytic processes could be an alternative. Despite the advantages provided in terms of kinetics of transformation, selectivity, and energy saving, numerous attempts have not yet led to implementation at an industrial scale. This review examines investigations at different scales for which controversies and limitations must be solved to bridge the gap between fundamentals and practical developments. Particular attention has been paid to the development of solar-driven catalytic technologies and some other emerging processes, such as microwave assisted catalysis, plasma-catalytic processes, or biocatalytic remediation, taking into account their specific advantages and the drawbacks. Challenges for which a better understanding related to the complexity of the systems and the coexistence of various solid-liquid-gas interfaces have been identified.

Microbial fuel cells and their electrified biofilms

Bioelectrochemical systems (BES) represent a wide range of different biofilm-based bioreactors that includes microbial fuel cells (MFCs), microbial electrolysis cells (MECs) and microbial desalination cells (MDCs). The first described bioelectrical bioreactor is the Microbial Fuel Cell and with the exception of MDCs, it is the only type of BES that actually produces harvestable amounts of electricity, rather than requiring an electrical input to function. For these reasons, this review article, with previously unpublished supporting data, focusses primarily on MFCs. Of relevance is the architecture of these bioreactors, the type of membrane they employ (if any) for separating the chambers along with the size, as well as the geometry and material composition of the electrodes which support biofilms. Finally, the structure, properties and growth rate of the microbial biofilms colonising anodic electrodes, are of critical importance for rendering these devices, functional living 'engines' for a wide range of applications.

Kinetics and scale up of oxygen reducing cathodic biofilms

The goals of this work were to study the kinetics and investigate the factors controlling the scale up of oxygen reducing mixed culture cathodic biofilms. Cathodic biofilms were enriched on different electrode sizes (14.5 cm2, 40.3 cm2, 131 cm2 and 466 cm2). Biofilm enrichment shifted the oxygen reduction onset potential from -0.1 VAg/AgCl to 0.3 VAg/AgCl, indicating the biofilm catalyzed oxygen reduction. The kinetics of oxygen reduction were studied by varying the bulk dissolved oxygen concentration. Oxygen reduction followed a Michaelis-Menten kinetics on all electrode sizes. The maximum current density decreased with increasing electrode surface area (-97.0 ± 10.6 μA/cm2, -76.0 ± 8.2 μA/cm2, -66.3 ± 3.0 μA/cm2 and -43.5 ± 10.5 μA/cm2, respectively). Cyclic voltammograms suggest that scale up was limited by ohmic resistance, likely due to the low ionic conductivity in the wastewater medium. Mathematical modeling using combined Michaelis-Menten and Butler-Volmer model supports that the decrease in current density with increasing electrode surface area is caused by ohmic losses. Analysis of the microbial community structure in different size electrodes and in multiple regions on the same electrode showed low variability, suggesting that the microbial community does not control the scale up of cathodic biofilms.

Green approach and strategies for wastewater treatment using bioelectrochemical systems: A critical review of fundamental concepts, applications, mechanism, and future trends

Millions of litters of multifarious wastewater are directly disposed into the environment annually to reduce the processing costs leading to eutrophication and destroying the clean water sources. The bioelectrochemical systems (BESs) have recently received significant attention from researchers due to their ability to convert waste into energy and their high efficiency of wastewater treatment. However, most of the performed researches of the BESs have focused on energy generation, which created a literature gap on the utilization of BESs for wastewater treatment. The review highlights this gap from various aspects, including the BESs trends, fundamentals, applications, and mechanisms. A different review approach has followed in the present work using a bibliometric review (BR) which defined the literature gap of BESs publications in the degradation process section and linked the systematic review (SR) with it to prove and review the finding systematically. The degradation mechanisms of the BESs have been illustrated comprehensively in the current work, and various suggestions have been provided for supporting future studies and cooperation.

Plant endophytic bacteria: A potential resource pool of electroactive micro-organisms

AIMS

Electroactive micro-organisms play a significant role in microbial fuel cells. It is necessary to discover potential resources in plant endophytes. In this study, plant tissues were selected to isolate endophytic bacteria, and the electrochemical activity potential was evaluated.

METHODS AND RESULTS

The microbial fuel cell (MFC) is used to evaluate the electricity-producing activity of endophytic bacteria in plant tissues, and the species distribution of micro-organisms in the anode of the MFC after inoculation of plant tissues is determined by high-throughput sequencing. Twenty-six strains of bacteria were isolated from plant tissues belonging to Angelica and Sweet Potato, of which 17 strains from six genera had electrochemical activity, including Bacillus sp., Pleomorphomonas sp., Rahnella sp., Shinella sp., Paenibacillus sp. and Staphylococcus sp. Moreover, the electricity-producing micro-organisms in the plant tissue are enriched. Pseudomonas and Clostridioides are the dominant genera of MFC anode inoculated with angelica tissue. Staphylococcus and Lachnoclostridium are the dominant genera in MFC anode inoculated with sweet potato tissue. And the most representative Gram-positive strain Staphylococcus succinus subsp. succinus H6 and plant tissue were further analysed for electrochemical activity. And a strain numbered H6 and plant tissue had a good electrogenerating activity.

CONCLUSION

This study is of great significance for expanding the resource pool of electricity-producing micro-organisms and tapping the potential of plant endophytes for electricity-producing.

SIGNIFICANCE AND IMPACT OF STUDY

This is the first study to apply plant endophytes to MFC to explore the characteristics of electricity production. It is of great significance for exploring the diversity of plant endophytes and the relationship between electricity producing bacteria and plants.

Enhanced bioelectricity output of microbial fuel cells via electrospinning zeolitic imidazolate framework-67/polyacrylonitrile carbon nanofiber cathode

In this study, the zeolitic imidazolate framework-67 (ZIF-67) and electrospinning polyacrylonitrile membrane were combined to prepare electrospinning carbon nanofibers composite cathode (ZIF-67/CNFs) which could enhance the oxygen reduction reaction (ORR) performance of microbial fuel cells (MFCs) cathode. The optimum electrode 3 wt% ZIF-67/CNFs revealed the excellent ORR performance with a half-wave potential of -0.03 V vs. Ag/AgCl, which was more positive than Pt/C-CC (-0.09 V vs. Ag/AgCl). The highest output voltage (607±9 mV) and maximum power density (1.191±0.017 W m^-2) were obtained when the prepared ZIF-67/CNFs electrode was applied to the cathode of MFC (ZIF-67/CNFs-MFC). In addition, ZIF-67/CNFs-MFC showed the best pollutant removal effect. Geobacter was the highest proportion of microbial in ZIF-67/CNFs-MFC. The results have shown that the application of ZIF-67/CNFs electrode to MFC cathode is promising.

Experimental and validation with neural network time series model of microbial fuel cell bio-sensor for phenol detection

Phenol is one of the most commonly known chemical compound found as a pollutant in the chemical industrial wastewater. This pollutant has potential threat for human health and environment, as it can be easily absorbed by the skin and the mucous. Here, we prepared dual chambered microbial fuel cell (MFC) sensor for the detection of phenol. Varying concentration of phenol (100 mg/l, 250 mg/l, 500 mg/l, and 1000 mg/l) was applied as a substrate to the MFC and their change in output voltage was also measured. After adding 100 mg/l, 250 mg/l, 500 mg/l, and 1000 mg/l of phenol as sole substrate to the MFC, the maximum voltage output was obtained as 360 ± 10 mV, 395 ± 8 mV, 320 ± 7 mV, 350 ± 5 mV respectively. This biosensor was operated using industrial wastewater isolated microbes as a sensing element and phenol was used as a sole substrate. The topologies of ANN were analyzed to get the best model to predict the power output of MFCs and the training algorithms were compared with their convergence rates in training and test results. Time series model was used for regression analysis to predict the future values based on previously observed values. Two types of mathematical modeling i.e. Scaled Conjugate Gradient (SCG) algorithm and Time-series model was used with 44 experimental data with varying phenol concentration and varying synthetic wastewater concentration to optimize the biosensor performance. Both SCG and time series showing the best results with R² value 0.98802 and 0.99115.

Microbial Fuel Cell: Recent Developments in Organic Substrate Use and Bacterial Electrode Interaction

A new bioelectrochemical approach based on metabolic activities inoculated bacteria, and the microbial fuel cell (MFC) acts as biocatalysts for the natural conversion to energy of organic substrates. Among several factors, the organic substrate is the most critical challenge in MFC, which requires long-term stability. The utilization of unstable organic substrate directly affects the MFC performance, such as low energy generation. Similarly, the interaction and effect of the electrode with organic substrate are well discussed. The electrode-bacterial interaction is also another aspect after organic substrate in order to ensure the MFC performance. The conclusion is based on this literature view; the electrode content is also a significant challenge for MFCs with organic substrates in realistic applications. The current review discusses several commercial aspects of MFCs and their potential prospects. A durable organic substrate with an efficient electron transfer medium (anode electrode) is the modern necessity for this approach.

A novel application of simple submersible yeast-based microbial fuel cells as dissolved oxygen sensors in environmental waters

In this study, yeast microbial fuel cells (MFCs) were established as biosensors for in-situ monitoring of dissolved oxygen (DO) levels in environmental waters, with yeast and glucose substrates acting as biocatalyst and fuel, respectively. Diverse environmental factors, such as temperature, pH and conductivity, were considered. The sensor performance was first tested with distilled water with different DO levels ranging from 0 mg/L to 8 mg/L and an external resistance of 1000 Ω. The relationship between DO and current density was non-linear (exponential). This MFC capability was further explored under different environmental conditions (pH, temperature and conductivity), and the current density produced was within the range of 0.14-34.88 mA/m², which increased with elevated DO concentration. The resulting regression was y = 1.3051e^0.3548x, with a regression coefficient (R²) = 0.71, indicating that the MFC-based DO meter was susceptible to interference. When used in environmental water samples, DO measurements using MFC resulted in errors ranging from 6.25 % to 15.15 % when compared with commercial DO meters. The simple yeast-based MFC sensors demonstrate promising prospects for future monitoring in a variety of areas, including developing countries and remote locations.

Recent progress of graphene based nanomaterials in bioelectrochemical systems

The application of graphene (Gr) to microbial fuel cells (MFCs) and microbial electrolysis cell (MECs) is considered a very promising approach in terms of enhancing their performance. The superior Gr properties of high electrical and thermal conductivities, along with: superior specific surface area, high electron mobility, and mechanical strength, are the key features that endorse this. Factors impeding the advancement of a microbial fuel cell into commercialization involve primarily the cost of their components, and their production on a small scale. Gr with such outstanding characteristics can help mitigate these challenges, when used as electrode material. The application of Gr as an anode material improves the efficiency of electron transfer and bacterial attachment. When used as a cathode material, it supports the oxygen reduction reaction. This investigation, presents a thorough analysis of the feasibility of Gr as an electrode material in both MFC and MEC applications - based on experimental results from the investigation. Current technological advancements in the implementation of Gr in MFC and MEC are also highlighted in this review. To summarise, the investigation exposes critical issues impeding the advancement of microbial fuel cells, and proposes possible solutions to mitigate these challenges.

Polycyclic Aromatic Hydrocarbons: Sources, Toxicity, and Remediation Approaches

Polycyclic aromatic hydrocarbons (PAHs) are widespread across the globe mainly due to long-term anthropogenic sources of pollution. The inherent properties of PAHs such as heterocyclic aromatic ring structures, hydrophobicity, and thermostability have made them recalcitrant and highly persistent in the environment. PAH pollutants have been determined to be highly toxic, mutagenic, carcinogenic, teratogenic, and immunotoxicogenic to various life forms. Therefore, this review discusses the primary sources of PAH emissions, exposure routes, and toxic effects on humans, in particular. This review briefly summarizes the physical and chemical PAH remediation approaches such as membrane filtration, soil washing, adsorption, electrokinetic, thermal, oxidation, and photocatalytic treatments. This review provides a detailed systematic compilation of the eco-friendly biological treatment solutions for remediation of PAHs such as microbial remediation approaches using bacteria, archaea, fungi, algae, and co-cultures. In situ and ex situ biological treatments such as land farming, biostimulation, bioaugmentation, phytoremediation, bioreactor, and vermiremediation approaches are discussed in detail, and a summary of the factors affecting and limiting PAH bioremediation is also discussed. An overview of emerging technologies employing multi-process combinatorial treatment approaches is given, and newer concepts on generation of value-added by-products during PAH remediation are highlighted in this review.

Scale-up and control the voltage of sediment microbial fuel cell for charging a cell phone

In this research, a power management system (PMS) has been developed to charge a cell phone battery based on sediment microbial fuel cells (SMFCs). The single SMFC produces a voltage of 1.16 V, which is too low for practical application. The voltage is increased by connecting several SMFCs in series or parallel, but the voltage reversal occurs when it is directly connected to the load. To prevent the voltage reversal, the super capacitor is first charged by the five different stack SMFCs and the charged super capacitor is used to provide the input power to a PMS. This PMS increases and regulates the input voltage of stack SMFCs up to 5.02 V for charging a cell phone battery. The charging and discharging times of the super capacitors have been investigated with five different stack SMFCs. In all five stack SMFCs, only module-5 provides power to PMS for long periods (13 min). Further, the cell phone battery is continuously charged using the two parallel-connected stack SMFCs similar to the module-5. The battery has been fully charged in 26 h using 72 SMFCs. The charged battery is used to perform for three purposes; voice calling, music playing and LED strip lighting. This study is informative for the application of SMFC in an off-grid location.

Scaling up self-stratifying supercapacitive microbial fuel cell

Self-stratifying microbial fuel cells with three different electrodes sizes and volumes were operated in supercapacitive mode. As the electrodes size increased, the equivalent series resistance decreased, and the overall power was enhanced (small: ESR = 7.2 Ω and P _max  = 13 mW; large: ESR = 4.2 Ω and P _max  = 22 mW). Power density referred to cathode geometric surface area and displacement volume of the electrolyte in the reactors. With regards to the electrode wet surface area, the large size electrodes (L-MFC) displayed the lowest power density (460 μW cm^-2) whilst the small and medium size electrodes (S-MFC, M-MFC) showed higher densities (668 μW cm^-2 and 633 μW cm^-2, respectively). With regard to the volumetric power densities the S-MFC, the M-MFC and the L-MFC had similar values (264 μW mL^-1, 265 μW mL^-1 and 249 μW cm^-1, respectively). Power density normalised in terms of carbon weight utilised for fabricating MFC cathodes-electrodes showed high output for smaller electrode size MFC (5811 μW g^-1-C- and 3270 μW g^-1-C- for the S-MFC and L-MFC, respectively) due to the fact that electrodes were optimised for MFC operations and not supercapacitive discharges. Apparent capacitance was high at lower current pulses suggesting high faradaic contribution. The electrostatic contribution detected at high current pulses was quite low. The results obtained give rise to important possibilities of performance improvements by optimising the device design and the electrode fabrication.

Methanogenesis inhibitors used in bio-electrochemical systems: A review revealing reality to decide future direction and applications

Microbial fuel cell (MFC) is a robust technology capable of treating real wastewaters by utilizing mixed anaerobic microbiota as inoculum for producing electricity from oxidation of the biodegradable matters. However, these mixed microbiota comprises of both electroactive microorganisms (EAM) and substrate/electron scavenging microorganisms such as methanogens. Hence, in order to maximize bioelectricity from MFC, different physio-chemical techniques have been applied in past investigations to suppress activity of methanogens. Interestingly, recent investigations exhibit that methanogens can produce electricity in MFC and possess the cellular machinery like cytochrome c and Type IV pili to perform extracellular electron transfer (EET) in the presence of suitable electron acceptors. Hence, in this review, in-depth analysis of versatile behaviour of methanogens in both MFC and natural anaerobic conditions with different inhibition techniques is explored. This review also discusses the future research directions based on the latest scientific evidence on role of methanogens for EET in MFC.

Metabolic engineering of a novel strain of electrogenic bacterium Arcobacter butzleri to create a platform for single analyte detection using a microbial fuel cell

Electrogenic bacteria metabolize organic substrates by transferring electrons to the external electrode, with subsequent electricity generation. In this proof-of-concept study, we present a novel strain of a known, electrogenic Arcobacter butzleri that can grow primarily on acetate and lactate and its electric current density is positively correlated (R² = 0.95) to the COD concentrations up to 200 ppm. Using CRISPR-Cas9 and Cpf1, we engineered knockout Arcobacter butzleri mutants in either the acetate or lactate metabolic pathway, limiting their energy metabolism to a single carbon source. After genome editing, the expression of either acetate kinase, ackA, or lactate permease, lctP, was inhibited, as indicated by qPCR results. All mutants retain electrogenic activity when inoculated into a microbial fuel cell, yielding average current densities of 81-82 mA/m², with wild type controls reaching 85-87 mA². In the case of mutants, however, current is only generated in the presence of the substrate for the remaining pathway. Thus, we demonstrate that it is possible to obtain electric signal corresponding to the specific organic compound via genome editing. The outcome of this study also indicates that the application of electrogenic bacteria can be expanded by genome engineering.

Electrochemistry-stimulated environmental bioremediation: Development of applicable modular electrode and system scale-up

Bioelectrochemical systems (BESs) have been studied extensively during the past decades owing primarily to their versatility and potential in addressing the water-energy-resource nexus. In stark contrast to the significant advancements that have been made in developing innovative processes for pollution control and bioresource/bioenergy recovery, minimal progress has been achieved in demonstrating the feasibility of BESs in scaled-up applications. This lack of scaled-up demonstration could be ascribed to the absence of suitable electrode modules (EMs) engineered for large-scale application. In this study, we report a scalable composite-engineered EM (total volume of 1 m³), fabricated using graphite-coated stainless steel and carbon felt, that allows integrating BESs into mainstream wastewater treatment technologies. The cost-effectiveness and easy scalability of this EM provides a viable and clear path to facilitate the transition between the success of the lab studies and applications of BESs to solve multiple pressing environmental issues at full-scale.

Electroosmotically generated disinfectant from urine as a by-product of electricity in microbial fuel cell for the inactivation of pathogenic species

This work presents a small scale and low cost ceramic based microbial fuel cell, utilising human urine into electricity, while producing clean catholyte into an initially empty cathode chamber through the process of electro-osmostic drag. It is the first time that the catholyte obtained as a by-product of electricity generation from urine was transparent in colour and reached pH>13 with high ionic conductivity values. The catholyte was collected and used ex situ as a killing agent for the inactivation of a pathogenic species such as Salmonella typhimurium, using a luminometer assay. Results showed that the catholyte solutions were efficacious in the inactivation of the pathogen organism even when diluted up to 1:10, resulting in more than 5 log-fold reduction in 4 min. Long-term impact of the catholyte on the pathogen killing was evaluated by plating Salmonella typhimurium on agar plates and showed that the catholyte possesses a long-term killing efficacy and continued to inhibit pathogen growth for 10 days.

Development of efficient electroactive biofilm in urine-fed microbial fuel cell cascades for bioelectricity generation

The Microbial fuel cell (MFC) technology harnesses the potential of some naturally occurring bacteria for electricity generation. Digested sludge is commonly used as the inoculum to initiate the process. There are, however, health hazards and practical issues associated with the use of digested sludge depending on its origin as well as the location for system deployment. This work reports the development of an efficient electroactive bacterial community within ceramic-based MFCs fed with human urine in the absence of sludge inoculum. The results show the development of a uniform bacterial community with power output levels equal to or higher than those generated from MFCs inoculated with sludge. In this case, the power generation begins within 2 days of the experimental set-up, compared to about 5 days in some sludge-inoculated MFCs, thus significantly reducing the start-up time. The metagenomics analysis of the successfully formed electroactive biofilm (EAB) shows significant shifts between the microbial ecology of the feeding material (fresh urine) and the developed anodic biofilm. A total of 21 bacteria genera were detected in the urine feedstock whilst up to 35 different genera were recorded in the developed biofilm. Members of Pseudomonas (18%) and Anaerolineaceae (17%) dominate the bacterial community of the fresh urine feed while members of Burkholderiaceae (up to 50%) and Tissierella (up to 29%) dominate the anodic EAB. These results highlight a significant shift in the bacterial community of the feedstock towards a selection and adaptation required for the various electrochemical reactions essential for survival through power generation.

How does electron transfer occur in microbial fuel cells?

Microbial fuel cells (MFCs) have emerged as a promising technology for sustainable wastewater treatment coupled with electricity generation. A MFC is a device that uses microbes as catalysts to convert chemical energy present in biomass into electrical energy. Among the various mechanisms that drive the operation of a MFC, extracellular electron transfer (EET) to the anode is one of the most important. Exoelectrogenic bacteria can natively transfer electrons to a conducting surface like the anode. The mechanisms employed for electron transfer can either be direct transfer via conductive pili or nanowires, or mediated transfer that involves either naturally secreted redox mediators like flavins and pyocyanins or artificially added mediators like methylene blue and neutral red. EET is a mechanism wherein microorganisms extract energy for growth and maintenance from their surroundings and transfer the resulting electrons to the anode to generate current. The efficiency of these electron transfer mechanisms is dependent not only on the redox potentials of the species involved, but also on microbial oxidative metabolism that liberates electrons. Attempts at understanding the electron transfer mechanisms will boost efforts in giving rise to practical applications. This article covers the various electron transfer mechanisms involved between microbes and electrodes in microbial fuel cells and their applications.

Production of Current by Syntrophy Between Exoelectrogenic and Fermentative Hyperthermophilic Microorganisms in Heterotrophic Biofilm from a Deep-Sea Hydrothermal Chimney

To study the role of exoelectrogens within the trophic network of deep-sea hydrothermal vents, we performed successive subcultures of a hyperthermophilic community from a hydrothermal chimney sample on a mix of electron donors in a microbial fuel cell system. Electrode (the electron acceptor) was swapped every week to enable fresh development from spent media as inoculum. The MFC at 80 °C yielded maximum current production increasing from 159 to 247 mA m^-2 over the subcultures. The experiments demonstrated direct production of electric current from acetate, pyruvate, and H₂ and indirect production from yeast extract and peptone through the production of H₂ and acetate from fermentation. The microorganisms found in on-electrode communities were mainly affiliated to exoelectrogenic Archaeoglobales and Thermococcales species, whereas in liquid media, the communities were mainly affiliated to fermentative Bacillales and Thermococcales species. The work shows interactions between fermentative microorganisms degrading complex organic matter into fermentation products that are then used by exoelectrogenic microorganisms oxidizing these reduced compounds while respiring on a conductive support. The results confirmed that with carbon cycling, the syntrophic relations between fermentative microorganisms and exoelectrogens could enable some microbes to survive as biofilm in extremely unstable conditions. Graphical Abstract Schematic representation of cross-feeding between fermentative and exoelectrogenic microbes on the surface of the conductive support. B, Bacillus/Geobacillus spp.; Tc, Thermococcales; Gg, Geoglobus spp.; Py, pyruvate; Ac, acetate.

3D biofilm visualization and quantification on granular bioanodes with magnetic resonance imaging

The use of microbial fuel cells (MFCs) for wastewater treatment fits in a circular economy context, as they can produce electricity by the removal of organic matter in the wastewater. Activated carbon (AC) granules are an attractive electrode material for bioanodes in MFCs, as they are cheap and provide electroactive bacteria with a large surface area for attachment. The characterization of biofilm growth on AC granules, however, is challenging due to their high roughness and three-dimensional structure. In this research, we show that 3D magnetic resonance imaging (MRI) can be used to visualize biofilm distribution and determine its volume on irregular-shaped single AC granules in a non-destructive way, while being combined with electrochemical and biomass analyses. Ten AC granules with electroactive biofilm (i.e. granular bioanodes) were collected at different growth stages (3 to 21 days after microbial inoculation) from a multi-anode MFC and T₁-weighted 3D-MRI experiments were performed for three-dimensional biofilm visualization. With time, a more homogeneous biofilm distribution and an increased biofilm thickness could be observed in the 3D-MRI images. Biofilm volumes varied from 0.4 μL (day 4) to 2 μL (day 21) and were linearly correlated (R² = 0.9) to the total produced electric charge and total nitrogen content of the granular bioanodes, with values of 66.4 C μL^-1 and 17 μg N μL^-1, respectively. In future, in situ MRI measurements could be used to monitor biofilm growth and distribution on AC granules.

Preparation and Analysis of Ni–Co Catalyst Use for Electricity Production and COD Reduction in Microbial Fuel Cells

Microbial fuel cells (MFCs) are devices than can contribute to the development of new technologies using renewable energy sources or waste products for energy production. Moreover, MFCs can realize wastewater pre-treatment, e.g., reduction of the chemical oxygen demand (COD). This research covered preparation and analysis of a catalyst and measurements of changes in the concentration of COD in the MFC with a Ni–Co cathode. Analysis of the catalyst included measurements of the electroless potential of Ni–Co electrodes oxidized for 1–10 h, and the influence of anodic charge on the catalytic activity of the Ni–Co alloy (for four alloys: 15, 25, 50, and 75% concentration of Co). For the Ni–Co alloy containing 15% of Co oxidized for 8 h, after the third anodic charge the best catalytic parameters was obtained. During the MFC operation, it was noted that the COD reduction time (to 90% efficiency) was similar to the reduction time during wastewater aeration. However, the characteristic of the aeration curve was preferred to the curve obtained during the MFC operation. The electricity measurements during the MFC operation showed that power equal to 7.19 mW was obtained (at a current density of 0.47 mA·cm−2).

Harvesting Energy from Multiple Microbial Fuel Cells with a High-Conversion Efficiency Power Management System

Direct electricity production from waste biomass in a microbial fuel cell (MFC) offers the advantage of producing renewable electricity at a high Coulombic efficiency. However, low MFC voltage (below 0.5 V) necessitates the simultaneous operation of multiple MFCs controlled by a power management system (PMS) adapted for operating bioelectrochemical systems with complex nonlinear dynamics. This work describes a novel PMS designed for efficient energy harvesting from multiple MFCs. The PMS includes a switched-capacitor-based converter, which ensures operation of each MFC at its maximum power point (MPP) by regulating the output voltage around half of its open-circuit voltage. The open-circuit voltage of each MFC is estimated online regardless of MFC internal parameter knowledge. The switched-capacitor-based converter is followed by an upconverter, which increases the output voltage to a required level. Advantages of the proposed PMS include online MPP tracking for each MFC and high (up to 85%) power conversion efficiency. Also, the PMS prevents voltage reversal by disconnecting an MFC from the circuit whenever its voltage drops below a predefined threshold. The effectiveness of the proposed PMS is verified through simulations and experimental runs.

Overview of Recent Advancements in the Microbial Fuel Cell from Fundamentals to Applications: Design, Major Elements, and Scalability

Microbial fuel cell (MFC) technology offers an alternative means for producing energy from waste products. In this review, several characteristics of MFC technology that make it revolutionary will be highlighted. First, a brief history presents how bioelectrochemical systems have advanced, ultimately describing the development of microbial fuel cells. Second, the focus is shifted to the attributes that enable MFCs to work efficiently. Next, follows the design of various MFC systems in use including their components and how they are assembled, along with an explanation of how they work. Finally, microbial fuel cell designs and types of main configurations used are presented along with the scalability of the technology for proper application. The present review shows importance of design and elements to reduce energy loss for scaling up the MFC system including the type of electrode, shape of the single reactor, electrical connection method, stack direction, and modulation. These aspects precede making economically applicable large-scale MFCs (over 1 m3 scale) a reality.

Wastewater Treatment and Electricity Production in a Microbial Fuel Cell with Cu–B Alloy as the Cathode Catalyst

The possibility of wastewater treatment and electricity production using a microbial fuel cell with Cu–B alloy as the cathode catalyst is presented in this paper. Our research covered the catalyst preparation; measurements of the electroless potential of electrodes with the Cu–B catalyst, measurements of the influence of anodic charge on the catalytic activity of the Cu–B alloy, electricity production in a microbial fuel cell (with a Cu–B cathode), and a comparison of changes in the concentration of chemical oxygen demand (COD), NH4+, and NO3– in three reactors: one excluding aeration, one with aeration, and during microbial fuel cell operation (with a Cu–B cathode). During the experiments, electricity production equal to 0.21–0.35 mA·cm−2 was obtained. The use of a microbial fuel cell (MFC) with Cu–B offers a similar reduction time for COD to that resulting from the application of aeration. The measured reduction of NH4+ was unchanged when compared with cases employing MFCs, and it was found that effectiveness of about 90% can be achieved for NO3– reduction. From the results of this study, we conclude that Cu–B can be employed to play the role of a cathode catalyst in applications of microbial fuel cells employed for wastewater treatment and the production of electricity.