Bacterial reduction of chromium

Enhancing in situ biodegradation in groundwater using pump and treat remediation: a proof of concept and modelling analysis of controlling variables

A remediation approach which uses pump and treatment (PAT) to enhance the biodegradation of organic contaminants by increasing dispersive mixing between plumes and groundwater was evaluated for a phenol-contaminated aquifer, using a reactive transport model which simulates kinetic reactions between an electron donor (ED) in the plume and electron acceptor (EA) in the groundwater. The influence of system design and operation was examined in six modelling scenarios. Injection or extraction of groundwater increases biodegradation above no action and the location, pumping rate, and distance between well(s) are important variables which influence biodegradation. An increase in pumping rate, distance of the wells from the plume centreline, and changing the flow direction increase dispersive mixing between the plume and groundwater. This increases plume spreading and the plume fringe interface, providing a greater flux of dissolved EAs for biodegradation. In general, injection of groundwater containing natural EAs enhances biodegradation more than extraction. The enhancement of biodegradation is sensitive to the relative fluxes of ED and EA, as controlled by the arrangement of the wells. In the best performing scenario, biodegradation was enhanced by 128%, compared with no action.

Complete genome sequence of Cellulomonas sp., strain ES6, a chromate-reducing bacterium isolated from chromium-contaminated subsurface sediment

Cellulomonas sp. strain ES6 is a chromate-reducing bacterium isolated from chromium contaminated subsurface sediment. Illumina MiSeq and Oxford Nanopore sequencing were used to assemble the genome sequence which consisted of a single circular chromosome of 4.13 Mb, contained 3,960 protein encoding genes and with an overall G + C content 75.38%.

Preparation and application synthesis of magnetic nanocomposite using waste toner for the removal of Cr(vi)

In this study, a novel magnetic nanocomposite was prepared using waste toner (WT) through high temperature decomposition, and calcination was conducted in different atmospheres (air, ammonia, and vacuum). WT calcined in ammonia (WT(NH₃)), and it was then utilized as an efficient absorbent for the reduction of Cr(vi) in aqueous solutions; a batch experiment with different conditions was performed to investigate its Cr(vi) removal ability. The effects of two pH-regulating acid (HCl and H₂SO₄) treatments were also studied. It was found that WT(NH₃) could remove about 99% Cr(vi) at pH 2 under H₂SO₄ treatment. The XRD and TEM results coupled with VSM results confirmed that WT(NH₃) is an Fe₃O₄/Fe₂N nanohybrid, which possesses excellent water-dispersibility and remarkable magnetic properties. XPS analysis showed the presence of Cr(vi) and Cr(iii) on the surface of WT(NH₃), which indicated that Cr(vi) was reduced to Cr(iii). Furthermore, H₂SO₄ regulation also promoted the reduction of Cr(vi) by WT(NH₃), and this reduction was higher than that obtained by HCl regulation.

A novel magnetic nanocomposite is prepared using waste toner via calcination in ammonia, which exhibits excellent magnetic properties and high efficiency for the removal of Cr(vi) via pH regulation using H₂SO₄.

Isolation and characterization of Cr(VI) reducing Cellulomonas spp. from subsurface soils: implications for long-term chromate reduction

Microbial enrichments from Cr(VI) contaminated and uncontaminated US Department of Energy Hanford Site sediments produced Cr(VI) reducing consortia when grown in the presence of Cr(VI) with acetate, D-xylose or glycerol as a carbon and energy source. Eight of the nine isolates from the consortia were Gram positive and four of these were identified by 16S rRNA sequence homology and membrane fatty acid composition as belonging to the genus Cellulomonas. Two strains, ES6 and WS01, were further examined for their ability to reduce Cr(VI) under growth and non-growth conditions. During fermentative growth on D-xylose, ES6 and WS01 decreased aqueous Cr(VI) concentrations from 0.04 mM Cr(VI) to below the detection limit (0.002 mM Cr(VI)) in less than three days and retained their ability to reduce Cr(VI) even after four months of incubation. Washed ES6 and WS01 cells also reduced Cr(VI) under non-growth conditions for over four months, both with and without the presence of an exogenous electron donor. K-edge XANES spectroscopy confirmed the reduction of Cr(VI) to Cr(III). The ability to reduce Cr(VI) after growth had stopped and in the absence of an external electron donor, suggests that stimulation of these types of organisms may lead to effective long-term, in situ passive reactive barriers for Cr(VI) removal. Our results indicate that Cr(VI) reduction by indigenous Cellulomonas spp. may be a potential method of in situ bioremediation of Cr(VI) contaminated sediment and groundwater.

Chromium-microorganism interactions in soils: remediation implications

Discharge of Cr waste from many industrial applications such as leather tanning, textile production, electroplating, metallurgy, and petroleum refinery has led to large-scale contamination of land and water. Generally, Cr exists in two stable states: Cr(III) and Cr(VI). Cr(III) is not very soluble and is immobilized by precipitation as hydroxides. Cr(VI) is toxic, soluble, and easily transported to water resources. Cr(VI) undergoes rapid reduction to Cr(III), in the presence of organic sources or other reducing compounds as electron donors, to become precipitated as hydroxides. Cr(VI)-reducing microorganisms are ubiquitous in soil and water. A wide range of microorganisms, including bacteria, yeasts; and algae, with exceptional ability to reduce Cr(VI) to Cr(III) anaerobically and/or aerobically, have been isolated from Cr-contaminated and noncontaminated soils and water. Bioremediation approaches using the Cr(VI)-reducing ability of introduced (in bioreactors) or indigenous (augmented by supplements with organic amendments) microorganisms has been more successful for remediation of Cr-contaminated water than soils. Apart from enzymatic reduction, nonenzymatic reduction of Cr(VI) can also be common and widespread in the environment. For instance, biotic-abiotic coupling reactions involving the microbially formed products, H2S (the end product of sulfate reduction), Fe(II) [formed by Fe(III) reduction], and sulfite (formed during oxidation of elemental sulfur), can mediate the dissimilatory reduction of Cr(VI). Despite the dominant occurrence of enzymatic and nonenzymatic reduction of Cr(VI), natural attenuation of Cr(VI) is not taking place at a long-term contaminated site in South Australia, even 225 years after the last disposal of tannery waste. Evidence suggests that excess moisture conditions leading to saturation or flooded conditions promote the complete removal of Cr(VI) in soil samples from this contaminated site; but Cr(VI) reappears, probably because of oxidation of the Cr(III) by Mn oxides, with a subsequent shift to drying conditions in the soil. In such environments with low natural attenuation capacity resulting from reversible oxidation of Cr(III), bioeremediation of Cr(VI) can be a challenging task.

Microbial biodiversity: approaches to experimental design and hypothesis testing in primary scientific literature from 1975 to 1999

Research interest in microbial biodiversity over the past 25 years has increased markedly as microbiologists have become interested in the significance of biodiversity for ecological processes and as the industrial, medical, and agricultural applications of this diversity have evolved. One major challenge for studies of microbial habitats is how to account for the diversity of extremely large and heterogeneous populations with samples that represent only a very small fraction of these populations. This review presents an analysis of the way in which the field of microbial biodiversity has exploited sampling, experimental design, and the process of hypothesis testing to meet this challenge. This review is based on a systematic analysis of 753 publications randomly sampled from the primary scientific literature from 1975 to 1999 concerning the microbial biodiversity of eight habitats related to water, soil, plants, and food. These publications illustrate a dominant and growing interest in questions concerning the effect of specific environmental factors on microbial biodiversity, the spatial and temporal heterogeneity of this biodiversity, and quantitative measures of population structure for most of the habitats covered here. Nevertheless, our analysis reveals that descriptions of sampling strategies or other information concerning the representativeness of the sample are often missing from publications, that there is very limited use of statistical tests of hypotheses, and that only a very few publications report the results of multiple independent tests of hypotheses. Examples are cited of different approaches and constraints to experimental design and hypothesis testing in studies of microbial biodiversity. To prompt a more rigorous approach to unambiguous evaluation of the impact of microbial biodiversity on ecological processes, we present guidelines for reporting information about experimental design, sampling strategies, and analyses of results in publications concerning microbial biodiversity.