Purification and properties of xylitol dehydrogenase from the xylose-fermenting yeastCandida shehatae

Identification and characterization of D-xylulokinase from the D-xylose-fermenting fungus, Mucor circinelloides

D-Xylulokinase catalyzes the phosphorylation of D-xylulose in the final step of the pentose catabolic pathway to form d-xylulose-5-phosphate. The D-xylulokinase activity was found to be induced by both D-xylose and L-arabinose, as well as some of the other enzymes involved in the pentose catabolism, in the D-xylose-fermenting zygomycetous fungus, Mucor circinelloides NBRC 4572. The putative gene, xyl3, which may encode D-xylulokinase, was detected in the genome sequence of this strain. The amino acid sequence deduced from the gene was more similar to D-xylulokinases from an animal origin than from other fungi. The recombinant enzyme was purified from the E. coli transformant expressing xyl3 and then characterized. The ATP-dependent phosphorylative activity of the enzyme was the highest toward D-xylulose. Its kinetic parameters were determined as Km (D-xylulose) = 0.29 mM and Km (ATP) = 0.51 mM, indicating that the xyl3 gene encoded D-xylulokinase (McXK). Western blot analysis revealed that McXK was induced by L-arabinose as well as D-xylose and the induction was repressed in the presence of D-glucose, suggesting that the enzyme may be involved in the catabolism of D-xylose and L-arabinose and is subject to carbon catabolite repression in this fungus. This is the first study on D-xylulokinase from zygomycetous fungi.

Molecular analysis of NAD⁺-dependent xylitol dehydrogenase from the zygomycetous fungus Rhizomucor pusillus and reversal of the coenzyme preference

The zygomycetous fungus Rhizomucor pusillus NBRC 4578 is able to ferment not only d-glucose but also d-xylose into ethanol. Xylitol dehydrogenase from R. pusillus NBRC 4578 (RpXDH), which catalyzes the second step of d-xylose metabolism, was purified, and its enzymatic properties were characterized. The purified RpXDH preferred NAD(+) as its coenzyme and showed substrate specificity for xylitol, d-sorbitol, and ribitol. cDNA cloning of xyl2 gene encoding RpXDH revealed that the gene included a coding sequence of 1,092 bp with a molecular mass of 39,185 kDa. Expression of the xyl2 in R. pusillus NBRC 4578 was induced by d-xylose, and the expression levels were increased with accumulation of xylitol. The xyl2 gene was expressed in Escherichia coli, and coenzyme preference of the recombinant RpXDH was reversed from NAD(+) to NADP(+) in the double mutant D205A/I206R by site-directed mutagenesis.

Identification and characterization of D-xylose reductase involved in pentose catabolism of the zygomycetous fungus Rhizomucor pusillus

Rhizomucor pusillus NBRC 4578 efficiently produces ethanol from lignocellulosic biomass because of its ability to ferment not only d-glucose, but also d-xylose. When the strain was cultivated on d-xylose, ethanol was gradually formed in the culture medium with a decrease in d-xylose and the simultaneous accumulation of xylitol, which suggested that the strain catabolized d-xylose with d-xylose reductase (XR) and xylitol dehydrogenase (XDH). XR (RpXR) was purified to homogeneity from the crude extract prepared from the mycelia of the strain grown on d-xylose. The purified enzyme was found to be NADPH-dependent and prefer pentoses such as d-xylose, d-ribose, and l-arabinose as substrates. Isolation of the genomic DNA and cDNA of the xyl1 gene encoding RpXR revealed that the gene was interrupted by two introns and the exon of the gene encoded a protein composed of 322 amino acids with a Mr of 36,724. Phylogenetic analysis showed that RpXR is more related to 4-dihydromethyltrisporate dehydrogenases from Mucoraseae fungi rather than the previously reported fungal XRs. Quantitative real-time PCR indicated that transcription of the xyl1 gene was marked in the presence of d-xylose and l-arabinose, but was week in the presence of d-glucose. These biochemical and expression analyses suggest that RpXR is involved in the catabolism of l-arabinose as well as d-xylose. This is the first report of the purification, characterization, and gene cloning of XR from zygomycetous fungi.

Cloning and characterization of a thermostable H2O-forming NADH oxidase from Lactobacillus rhamnosus

NADH oxidase (Nox) catalyzes the conversion of NADH to NAD(+). A previously uncharacterized Nox gene (LrNox) was cloned from Lactobacillus rhamnosus and overexpressed in Escherichia coli BL21(DE3). Sequence analysis revealed an open reading frame of 1359 bp, capable of encoding a polypeptide of 453 amino acid residues. The molecular mass of the purified LrNox enzyme was estimated to be ~50 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, and 100 kDa by gel filtration chromatography, suggesting that the enzyme is a homodimer. The enzyme had optimal activity at pH 5.6 and temperature 65 °C, and k(cat)/K(m) of 3.77×10(7) s(-1) M(-1), the highest ever reported. Heat inactivation studies revealed that LrNox had high thermostability, with a half-life of 120 min at 80 °C. Molecular dynamics simulation studies shed light on the factors contributing to the high activity of LrNox. Although the properties of Nox from several microorganisms have been reported, this is the first report on the characterization of a recombinant H(2)O-forming Nox with high activity and thermostability. The characteristics of the LrNox enzyme could prove to be of interest in industrial applications such as NAD(+) regeneration.

Genetic improvement of Saccharomyces cerevisiae for xylose fermentation

There is considerable interest in recent years in the bioconversion of forestry and agricultural residues into ethanol and value-added chemicals. High ethanol yields from lignocellulosic residues are dependent on efficient use of all the available sugars including glucose and xylose. The well-known fermentative yeast Saccharomyces cerevisiae is the preferred microorganism for ethanol production, but unfortunately, this yeast is unable to ferment xylose. Over the last 15 years, this yeast has been the subject of various research efforts aimed at improving its ability to utilize xylose and ferment it to ethanol. This review examines the research on S. cerevisiae strains that have been genetically modified or adapted to ferment xylose to ethanol. The current state of these efforts and areas where further research is required are identified and discussed.

Towards industrial pentose-fermenting yeast strains

Production of bioethanol from forest and agricultural products requires a fermenting organism that converts all types of sugars in the raw material to ethanol in high yield and with a high rate. This review summarizes recent research aiming at developing industrial strains of Saccharomyces cerevisiae with the ability to ferment all lignocellulose-derived sugars. The properties required from the industrial yeast strains are discussed in relation to four benchmarks: (1) process water economy, (2) inhibitor tolerance, (3) ethanol yield, and (4) specific ethanol productivity. Of particular importance is the tolerance of the fermenting organism to fermentation inhibitors formed during fractionation/pretreatment and hydrolysis of the raw material, which necessitates the use of robust industrial strain background. While numerous metabolic engineering strategies have been developed in laboratory yeast strains, only a few approaches have been realized in industrial strains. The fermentation performance of the existing industrial pentose-fermenting S. cerevisiae strains in lignocellulose hydrolysate is reviewed. Ethanol yields of more than 0.4 g ethanol/g sugar have been achieved with several xylose-fermenting industrial strains such as TMB 3400, TMB 3006, and 424A(LNF-ST), carrying the heterologous xylose utilization pathway consisting of xylose reductase and xylitol dehydrogenase, which demonstrates the potential of pentose fermentation in improving lignocellulosic ethanol production.

Metabolic engineering for pentose utilization in Saccharomyces cerevisiae

The introduction of pentose utilization pathways in baker's yeast Saccharomyces cerevisiae is summarized together with metabolic engineering strategies to improve ethanolic pentose fermentation. Bacterial and fungal xylose and arabinose pathways have been expressed in S. cerevisiae but do not generally convey significant ethanolic fermentation traits to this yeast. A large number of rational metabolic engineering strategies directed among others toward sugar transport, initial pentose conversion, the pentose phosphate pathway, and the cellular redox metabolism have been exploited. The directed metabolic engineering approach has often been combined with random approaches including adaptation, mutagenesis, and hybridization. The knowledge gained about pentose fermentation in S. cerevisiae is primarily limited to genetically and physiologically well-characterized laboratory strains. The translation of this knowledge to strains performing in an industrial context is discussed.

Cloning and expression of NAD+-dependent L-arabinitol 4-dehydrogenase gene (ladA) of Aspergillus oryzae

A gene of Aspergillus oryzae, ladA, which encodes L-arabinitol 4-dehydrogenase (EC 1.1.1.12), and its cDNA were cloned in Escherichia coli. The gene consisted of a 1209-bp coding region, interrupted by a 59-bp intron, which encoded a 382-amino-acid polypeptide (40,812 Da). The protein showed 67% identity to a well-studied L-arabinitol 4-dehydrogenase (Lad1) of Hypocrea jecorina. The cell-free extract of E. coli, which expressed ladA cDNA, showed L-arabinitol dehydrogenase activity with NAD+. It was also reactive for ribitol and xylitol.

Cloning and expression of a NAD+-dependent xylitol dehydrogenase gene (xdhA) of Aspergillus oryzae

XdhA, which encodes a xylitol dehydrogenase gene, was cloned from Aspergillus oryzae genomic DNA. It consists of 1214 bp structural region, which is interrupted by two introns, and encodes 358-amino-acid protein (38,197 Da). It is similar to the known NAD(+)-dependent xylitol dehydrogenase (EC 1.1.1.9). The gene was expressed in Escherichia coli BL21-AI using a T7 promoter. The cell-free extract of the transformant showed a 36.5 kDa band upon SDS-PAGE and NAD(+)-dependent xylitol dehydrogenase activity.

Characterization of the AXDH gene and the encoded xylitol dehydrogenase from the dimorphic yeast Arxula adeninivorans

The xylitol dehydrogenase-encoding Arxula adeninivorans AXDH gene was isolated and characterized. The gene includes a coding sequence of 1107 bp encoding a putative 368 amino acid protein of 40.3 kDa. The identity of the gene was confirmed by a high degree of homology of the derived amino acid sequence to that of xylitol dehydrogenases from different sources. The gene activity was regulated by carbon source. In media supplemented with xylitol, D-sorbitol and D-xylose induction of the AXDH gene and intracellular accumulation of the encoded xylitol dehydrogenase was observed. This activation pattern was confirmed by analysis of AXDH promoter-GFP gene fusions. The enzyme characteristics were analysed from isolates of native strains as well as from those of recombinant strains expressing the AXDH gene under control of the strong A. adeninivorans-derived TEF1 promoter. For both proteins, a molecular mass of ca. 80 kDa was determined corresponding to a dimeric structure, an optimum pH at 7.5 and a temperature optimum at 35 degrees C. The enzyme oxidizes polyols like xylitol and D-sorbitol whereas the reduction reaction is preferred when providing D-xylulose, D-ribulose and L-sorbose as substrates. Enzyme activity exclusively depends on NAD+ or NADH as coenzymes.

Cloning of the xylitol dehydrogenase gene from Gluconobacter oxydans and improved production of xylitol from D-arabitol

Xylitol dehydrogenase (XDH) was purified from the cytoplasmic fraction of Gluconobacter oxydans ATCC 621. The purified enzyme reduced D-xylulose to xylitol in the presence of NADH with an optimum pH of around 5.0. Based on the determined NH2-terminal amino acid sequence, the gene encoding xdh was cloned, and its identity was confirmed by expression in Escherichia coli. The xdh gene encodes a polypeptide composed of 262 amino acid residues, with an estimated molecular mass of 27.8 kDa. The deduced amino acid sequence suggested that the enzyme belongs to the short-chain dehydrogenase/reductase family. Expression plasmids for the xdh gene were constructed and used to produce recombinant strains of G. oxydans that had up to 11-fold greater XDH activity than the wild-type strain. When used in the production of xylitol from D-arabitol under controlled aeration and pH conditions, the strain harboring the xdh expression plasmids produced 57 g/l xylitol from 225 g/l D-arabitol, whereas the control strain produced 27 g/l xylitol. These results demonstrated that increasing XDH activity in G. oxydans improved xylitol productivity.

Novel enzymatic method for the production of xylitol from D-arabitol by Gluconobacter oxydans

Microorganisms capable of producing xylitol from D-arabitol were screened for. Of the 420 strains tested, three bacteria, belonging to the genera Acetobacter and Gluconobacter, produced xylitol from D-arabitol when intact cells were used as the enzyme source. Among them, Gluconobacter oxydans ATCC 621 produced 29.2 g/l xylitol from 52.4 g/l D-arabitol after incubation for 27 h. The production of xylitol was increased by the addition of 5% (v/v) ethanol and 5 g/l D-glucose to the reaction mixture. Under these conditions, 51.4 g/l xylitol was obtained from 52.4 g/l D-arabitol, a yield of 98%, after incubation for 27 h. This conversion consisted of two successive reactions, conversion of D-arabitol to D-xylulose by a membrane-bound D-arabitol dehydrogenase, and conversion of D-xylulose to xylitol by a soluble NAD-dependent xylitol dehydrogenase. Use of disruptants of the membrane-bound alcohol dehydrogenase genes suggested that NADH was generated via NAD-dependent soluble alcohol dehydrogenase.

Development of a xylitol biosensor composed of xylitol dehydrogenase and diaphorase

In preparation for the development of a xylitol biosensor, the xylitol dehydrogenase of Candida tropicalis IFO 0618 was partially purified and characterized. The optimal pH and temperature of the xylitol dehydrogenase were pH 8.0 and 50°C, respectively. Of the various alcohols tested, xylitol was the most rapidly oxidized, with sorbitol and ribitol being reduced at 65% and 58% of the xylitol rate. The enzyme was completely inactive on arabitol, xylose, glucose, glycerol, and ethanol. The enzyme's xylitol oxidation favored the use of NAD+ (7.9 U/mg) over NADP+ (0.2 U/mg) as electron acceptor, while the reverse reaction, D-xylulose reduction, favored NADPH (7.7 U/mg) over NADH (0.2 U/mg) as electron donor. The Km values for xylitol and NAD+ were 49.8 mM and 38.2 µM, respectively. For the generation of the xylitol biosensor, the above xylitol dehydrogenase and a diaphorase were immobilized on bromocyan-activated sephallose. The gel was then attached on a dissolved oxygen electrode. In the presence of vitamin K3, NAD+ and phosphate buffer, the biosensor recorded a linear response to xylitol concentration up to 3 mM. The reaction was stable after 15 min. When the biosensor was applied to a flow injection system, optimal operation pH and temperature were 8.0 and 30°C, respectively. The strengths and limitations of the xylitol biosensor are its high affinity for NAD+, slow reaction time, narrow linear range of detection, and moderate affinity for xylitol.Key words: xylitol, xylitol dehydrogenase, biosensor, Candida tropicalis.

Isolation, characterization, and molecular cloning of a thermostable xylitol oxidase from Streptomyces sp. IKD472

A thermophilic bacterium, Streptomyces sp. IKD472, that can oxidize xylitol was isolated from a hot spring and was found to produce xylitol oxidase. The purified enzyme was a monomeric protein with an apparent molecular weight of 43 k as determined by sodium dodecyl sulfate polyacrylamide gel electrophoresis and gel filtration. This novel enzyme is capable of catalyzing the oxidation of one mole of xylitol to form one mole each of xylose and hydrogen peroxide. Since the V(max)K(m) value for xylitol was two and four times higher than those for galactitol and n-sorbitol, respectively, the enzyme was designated as xylitol oxidase. The enzyme was stable in the pH range from 5.5 to 10.5 and at temperatures up to 65 degrees C. The optimal temperature and pH were 55 degrees C and pH 7.5, respectively. Xylitol oxidase bound one mole of FAD as a coenzyme per mole of protein. The amino acid sequence of the NH2 terminus and the fragments obtained by lysylendpeptidase digestion of xylitol oxidase were determined for preparation of synthetic oligonucleotides as hybridization probes. A 2.8-kb chromosomal fragment hybridizing to the probes was cloned into pUC18 in Escherichia coli. The gene consists of an open reading frame of 1245 by that encodes a protein containing 415 amino acids with a molecular weight of 44,730 but without the conserved nucleotide-binding sequence, Gly-X-Gly-X-X-Gly. The amino acid sequence has 70% identity to putative oxidoreductase from Streptomyces coelicolar, 51% to sorbitol oxidase from Streptomyces sp., and 26% to L-gulonolactone oxidase from rat in terms of the overall amino acid sequence. DNA manipulation of the cloned gene in E. coli, by alteration of a strong promoter and a synthesized ribosome-binding sequence at an appropriate position, resulted in overproduction of xylitol oxidase 100 times more than that produced in the original Streptomyces sp. IKD472. The enzyme properties of recombinant xylitol oxidase were the same as those of the authentic enzyme. Stable xylitol oxidases, which allow easier quantitative analysis of xylitol, are useful for clinical applications.