Environmental toxicity monitoring using electrochemical biosensing systems

Optical sensor arrays for chemical sensing: the optoelectronic nose

A comprehensive review is presented on the development and state of the art of colorimetric and fluorometric sensor arrays. Optical arrays based on chemoresponsive colorants (dyes and nanoporous pigments) probe the chemical reactivity of analytes, rather than their physical properties. This provides a high dimensionality to chemical sensing that permits high sensitivity (often down to ppb levels), impressive discrimination among very similar analytes and exquisite fingerprinting of extremely similar mixtures over a wide range of analyte types, both in the gas and liquid phases.

Nanotechnology-based electrochemical sensors for biomonitoring chemical exposures

The coupling of dosimetry measurements and modeling represents a promising strategy for deciphering the relationship between chemical exposure and disease outcome. To support the development and implementation of biological monitoring programs, quantitative technologies for measuring xenobiotic exposure are needed. The development of portable nanotechnology-based electrochemical (EC) sensors has the potential to meet the needs for low cost, rapid, high-throughput, and ultrasensitive detectors for biomonitoring an array of chemical markers. Highly selective EC sensors capable of pM sensitivity, high-throughput and low sample requirements (<50 microl) are discussed. These portable analytical systems have many advantages over currently available technologies, thus potentially representing the next generation of biomonitoring analyzers. This paper highlights research focused on the development of field-deployable analytical instruments based on EC detection. Background information and a general overview of EC detection methods and integrated use of nanomaterials in the development of these sensors are provided. New developments in EC sensors using various types of screen-printed electrodes, integrated nanomaterials, and immunoassays are presented. Recent applications of EC sensors for assessing exposure to pesticides or detecting biomarkers of disease are highlighted to demonstrate the ability to monitor chemical metabolites, enzyme activity, or protein biomarkers of disease. In addition, future considerations and opportunities for advancing the use of EC platforms for dosimetric studies are discussed.

Enzyme Electrochemistry — Biocatalysis on an Electrode

Oxidoreductase enzymes catalyze single- or multi-electron reduction/oxidation reactions of small molecule inorganic or organic substrates, and they are integral to a wide variety of biological processes including respiration, energy production, biosynthesis, metabolism, and detoxification. All redox enzymes require a natural redox partner such as an electron-transfer protein (e.g. cytochrome, ferredoxin, flavoprotein) or a small molecule cosubstrate (e.g. NAD(P)H, dioxygen) to sustain catalysis, in effect to balance the substrate/product redox half-reaction. In principle, the natural electron-transfer partner may be replaced by an electrochemical working electrode. One of the great strengths of this approach is that the rate of catalysis (equivalent to the observed electrochemical current) may be probed as a function of applied potential through linear sweep and cyclic voltammetry, and insight to the overall catalytic mechanism may be gained by a systematic electrochemical study coupled with theoretical analysis. In this review, the various approaches to enzyme electrochemistry will be discussed, including direct and indirect (mediated) experiments, and a brief coverage of the theory relevant to these techniques will be presented. The importance of immobilizing enzymes on the electrode surface will be presented and the variety of ways that this may be done will be reviewed. The importance of chemical modification of the electrode surface in ensuring an environment conducive to a stable and active enzyme capable of functioning natively will be illustrated. Fundamental research into electrochemically driven enzyme catalysis has led to some remarkable practical applications. The glucose oxidase enzyme electrode is a spectacularly successful application of enzyme electrochemistry. Biosensors based on this technology are used worldwide by sufferers of diabetes to provide rapid and accurate analysis of blood glucose concentrations. Other applications of enzyme electrochemistry are in the sensing of macromolecular complexation events such as antigen–antibody binding and DNA hybridization. The review will include a selection of enzymes that have been successfully investigated by electrochemistry and, where appropriate, discuss their development towards practical biotechnological applications.

Multi-step analysis of Hg2+ ion inhibition of jack bean urease

We performed a multi-step analysis of the inhibition of jack bean urease by Hg(2+) ions that included residual activity measurements after incubation of the enzyme with the metal ion, reactivation of Hg(2+)-inhibited urease, protection of urease with thiol reagents prior to incubation with Hg(2+), progress curve analysis, and spectroscopic assay of thiol groups in urease-Hg(2+) complexes with a cysteine selective agent 5,5'-dithiobis(2-nitrobenzoic acid) (DTNB). Hg(2+) ions were found to form stable complexes with urease that could rapidly be reversed only by the treatment with dithiotreitol, and not by dilution or dialysis. The residual activity data interpreted in terms of the Hill equation revealed the multisite Hg(2+) inhibition of urease, and along with the DTNB thiol-assay they demonstrated the involvement in the reaction with Hg(2+) of six cysteine residues per enzyme subunit, including the active-site flap cysteine. The molar ratios of the inhibitor and enzyme imply that the inhibition consists of the formation of RSHgX complexes, X being a water molecule or an anion. The time-dependent Hg(2+) inhibitory action on urease determined in the system without enzyme preincubation was best described by slow-binding mechanism with the steady-state inhibition constant K(i) = 1.9 nM (+/-10%).

Heavy metal ions inhibition of jack bean urease: potential for rapid contaminant probing

The kinetics of heavy metal ions inhibition of jack bean urease was studied by progress curve analysis in a reaction system without enzyme-inhibitor preincubation. The inhibition was found to be biphasic with an initial, small inhibitory phase changing over the time course of 5-10 min into a final linear steady state with a lower velocity. This time-dependent pattern was best described by mechanism B of slow-binding inhibition, involving the rapid formation of an EI complex that subsequently undergoes slow conversion to a more stable EI* complex. The kinetic parameters of the process, the inhibition constants Ki and Ki* and the forward k5 and reverse k6 rate constants for the conversion, were evaluated from the reaction progress curves by nonlinear regression treatment. Based on the values of the overall inhibition constant Ki*, the heavy metal ions were found to inhibit urease in the following decreasing order: Hg2+ > Cu2+ > Zn2+ > Cd2+ > Ni2+ > Pb2+ > Co2+ > Fe3+ > As3+. With the Ki* values as low as 1.9 nM for Hg2+ and 7.1 nM for Cu2+, 100-1000 times lower than those of the other ions, urease may be utilized as a bioindicator of the trace levels of these ions in environmental monitoring, bioprocess control or pharmaceutical analysis.

The effect of 4-nonylphenol on the pigmentation of Ocimum basilicum (Basil)

BACKGROUND, AIM AND SCOPE

Tests during the last few years have confirmed that 4-nonylphenol (4-NP) can have oestrogen-like effects (xeno-hormone) on animal organisms. The objective was to firstly evaluate the ecotoxicological effects of 4-NP on plants such as hydrocultures. To clarify how this substance interferes with the photosynthetic system of plants, various tests were carried out using the basil plant (Ocimum basilicum).

METHODS

The effect of the pollutant 4-NP on the pigment content in the leaves of the basil plant was analysed with the use of High-Performance-Liquid-Chromatography (HPLC).

RESULTS AND DISCUSSION

A general assessment of the HPLC data revealed that plants that came in contact with the 4-nonylphenol showed a change in pigmentation. More chlorophyll a and b was produced, although at the same time a higher production of degradation products and by-products of the chlorophylls was observed. These occurrences can therefore be seen as an impairment of the photosynthetic process. The contaminated plants produced less xanthophylls than the non-contaminated ones, though these differences were statistically not significant.

CONCLUSION AND PERSPECTIVE

The variations on the pigment content in the leaves of the basil plant can be interpreted as a consequence of the 4-NP application. It was, however, not investigated whether the plants absorbed the pollutants directly. The effect could have been caused by adsorption of the oily substance to the roots, and this could have led to a hindrance of the uptake of nutrients and possibly water. In order to clarify this further, biochemical experiments are being conducted.

Improvement of Homogeneity of Analytical Biodevices by Gene Manipulation

Homogeneity is proposed for evaluation of the quality of analytical biodevices, such as biosensors and biochips. As a demonstration, glucose oxidase (GOx) was modified at its C-terminal with a linker peptide with a cysteine residue at the end. The fusion structure (GOx-linker-cysteine) enables the enzyme to immobilize on gold surfaces with a Cys-S-Au bond or to immobilize on a silanized glass surface via disulfide chemistry. With this fusion structure, the enzyme can be anchored onto the substrate with well-controlled orientation, thus forming a homogeneous biological layer on biodevices. The linker peptide between GOx and the cysteine acts as a spacer to reduce the steric hindrance caused by the bulky body of the enzyme. Biochemistry experiments showed that this genetically modified glucose oxidase (shortened to GOxm) retained most of its catalytic characteristics, with K(m) and K(cat) similar to those of the wild-type GOx. Electrochemistry experiments showed that GOxm-modified electrode gave higher and more stable current responses than the electrode modified with GOx which has no free -SH on its surface. The coefficients of variation (used for evaluation of the interchangeability of the enzyme device from the same batch preparation) were 9.5% for the GOxm gold electrode and 20.0% for the GOx gold electrode and the GOxm oxygen electrode. The relative errors (used for evaluation of the precision of the individual enzyme device) were 2.9% for the GOxm gold electrode, 12.0% for the GOx gold electrode, and 11.2% for the GOxm oxygen electrode. Atomic force microscopy images revealed that GOxm formed a self-assembled monolayer in a hexagonal-like lattice packing arrangement on the gold surface, while GOx formed multilayer assembling or aggregated particles. The homogeneity of the protein chips, the GOxm array that was prepared through -S-S- formation, and the GOx array that was prepared through nonspecific adsorption was evaluated. The coefficients of variation, calculated with the signal level of all dots, were 5.4% for the GOxm array and 81.8% for the GOx array. All experimental results pointed to the fact that the homogeneity of the analytical biodevices could be considerably improved by using the proposed method.

Electrochemical biosensors for environmental monitoring

Highly sensitive electrochemical biosensors offer precision, sensitivity, rapidity, and ease of operation for on-site environmental analysis. An electrochemical biosensor is an analytical device in which a specific biological recognition element (bioreceptor) is integrated within or intimately associated with an electrode (transducer) that converts the recognition event to a measurable electrical signal for the purpose of detecting a target compound (analyte) in solution. The signal generated allows both qualitative and quantitative measurements of an analyte in real time. In most cases, a miniaturized electrochemical cell contains a low volume of analyte, which is vital when dealing with hazardous materials and makes such devices ideal for environmental monitoring. This approach not only provides the means for on-site analysis but also removes the time delay and sample alteration that can occur during transport to a centralized laboratory. We first address the basic principles of electroanalytical measurement and the merger of electrochemistry and biology into a biosensing system, and then we discuss various environmental monitoring strategies involving this technology.