Surface characteristics and fibroblast adhesion behavior of RGD-immobilized biodegradable PLLA films

Photoluminescent Response of Poly(3-methylthiophene)-DNA Single Nanowire Correlating to Nucleotide-Mismatch Locus in DNA-DNA Hybridization

π-Conjugated polymers have become qualified candidates for biosensing owing to their unique optoelectronic properties and excellent biocompatibility. In this contribution, nucleotide mismatches in DNA hybridization, being variable in position, are reflected in a stark manner by poly(3-methylthiophene) (P3MT) nanowires (NWs), in which probe DNA sequence is properly functionalized. Selected as the systematic investigation are complementary target DNA (tDNA), random sequence DNA, and three kinds of 1-mer mismatched tDNAs with different mismatch loci away from the NW's surface. Nanoscale optical observation of the single P3MT NWs in solid states reveals that the more distant the mismatch position is from the surface, the higher the photoluminescence (PL) occurs, while the complementary sequence yields the highest but the random one remains the lowest. Hence, the PL intensity increases with the relative length of the DNA-DNA hybridization from the surface. These results deliver a new basis that π-conjugated polymers can be potentially applicable to detailed nucleotide analyses as in single nucleotide polymorphism.

Correlation between Surface Properties of Polystyrene and Polylactide Materials and Fibroblast and Osteoblast Cell Line Behavior: A Critical Overview of the Literature

Bone reconstruction remains an important challenge today in several clinical situations, notably regarding the control of the competition occurring during proliferation of osteoblasts and fibroblasts. Polystyrene and polylactide are reference materials in the biomedical field. Therefore, it could be expected from the literature that clear correlations have been already established between the behavior of fibroblasts or osteoblasts and the surface characteristics of these materials. After an extensive analysis of the literature, although general trends could be established, our critical review has highlighted the need to develop a more in-depth analysis of the surface properties of these materials. Moreover, the large variation noticed in the experimental conditions used for in vitro animal cell studies impairs comparison between studies. From our comprehensive review on this topic, we have suggested several parameters that would be valuable to standardize to integrate the data from the literature and improve our knowledge on the cell-material interactions.

Biocompatibility of helicoidal multilamellar arginine-glycine-aspartic acid-functionalized silk biomaterials in a rabbit corneal model

Silk proteins represent a unique choice in the selection of biomaterials that can be used for corneal tissue engineering and regenerative medical applications. We implanted helicoidal multilamellar arginine-glycine-aspartic acid-functionalized silk biomaterials into the corneal stroma of rabbits, and evaluated its biocompatibility. The corneal tissue was examined after routine hematoxylin-eosin staining, immunofluorescence for collagen I and III, and fibronectin, and scanning electron microscopy. The silk films maintained their integrity and transparency over the 180-day experimental period without causing immunogenic and neovascular responses or degradation of the rabbit corneal stroma. Collagen I increased, whereas Collagen III and fibronectin initially increased and then gradually decreased. The extracellular matrix deposited on the surface of the silk films, tightly adhered to the biomaterial. We have shown this kind of silk film graft has suitable biocompatibility with the corneal stroma and is an initial step for clinical trials to evaluate this material as a transplant biomaterial for keratoplasty tissue constructs.

The biological response of poly(L-lactide) films modified by different biomolecules: role of the coating strategy

The interactions between the surface of synthetic scaffolds and cells play an important role in tissue engineering applications. To improve these interactions, two strategies are generally followed: surface coating with large proteins and surface grafting with small peptides. The proteins and peptides more often used and derived from the extracellular matrix, are fibronectin, laminin, and their active peptides, RGD and SIKVAV, respectively. The aim of this work was to compare the effects of coating and grafting of poly(L-lactide) (PLLA) films on MRC5 fibroblast cells. Grafting reactions were verified by X-ray photoelectron spectroscopy. Cell adhesion and proliferation on coated and grafted PLLA surfaces were measured by cell counting. Vinculin localization and distribution were performed on cell cultured on PLLA samples using a fluorescence microscopy technique. Finally, western blot was performed to compare signals of cell adhesion proteins, such as vinculin, Rac1, and RhoA, as well as cell proliferation, such as PCNA. These tests showed similar results for fibronectin and laminin coated PLLA, while RGD grafting is more effective compared with SIKVAV grafting. Considering the overall view of these results, although coating and grafting can both be regarded as effective methods for surface modification to enhance cell adhesion and proliferation on a biomaterial, RGD grafted PLLA show better cell adhesion and proliferation than coated PLLA, while SIKVAV grafted PLLA show similar adhesion but worse proliferation. These data verified different biological effects depending on the surface modification method used.

Heterofunctional nanosheet controlling cell adhesion properties by collagen coating

Recently, biomaterials have been widely used in a variety of medical applications. We previously reported that a poly-l-lactic acid (PLLA) nanosheet shows anti-adhesive properties and constitutes a useful biomaterial for preventing unwanted wound adhesion in surgical operations. In this article, we examine whether the PLLA nanosheet can be specifically modified with biomacromolecules on one surface only. Such an approach would endow each side of the nanosheet with discrete functions, that is anti-adhesive and pro-healing properties. We fabricated two distinct PLLA nanosheets: (i) collagen cast on the surface of a PLLA nanosheet (Col-Cast-PLLA) and (ii) collagen spin-coated on the nanosheet (Col-Spin-PLLA). In the Col-Spin-PLLA nanosheet, the collagen layer had a thickness of 5–10 nm on the PLLA surface and displayed increased hydrophilicity compared to both PLLA and Col-Cast-PLLA nanosheets. In addition, atomic force microscopy showed disorganized collagen fibril formation on the PLLA layer when covered using the spin-coating method, while apparent bundle formations of collagen were formed in the Col-Cast-PLLA nanosheet. The Col-Spin-PLLA nanosheet provided a microenvironment for cells to adhere and spread. By contrast, the Col-Cast-PLLA nanosheet displayed reduced cell adhesion compared to the Col-Spin-PLLA nanosheet. Consistent with these findings, immunocytochemical analysis clearly showed fine networks of actin filaments in cells cultured on the Col-Spin-PLLA, but not the Col-Cast-PLLA nanosheet. Therefore, the Col-Spin-PLLA nanosheet was shown to be more suitable for acting as a scaffold. In conclusion, we have succeeded in developing a heterofunctional nanosheet comprising a collagen modified side, which has the ability to rapidly adhere cells, and an unmodified side, which acts as an adhesion barrier, by using a spin-coating technique.

Helicoidal multi-lamellar features of RGD-functionalized silk biomaterials for corneal tissue engineering

RGD-coupled silk protein-biomaterial lamellar systems were prepared and studied with human cornea fibroblasts (hCFs) to match functional requirements. A strategy for corneal tissue engineering was pursued to replicate the structural hierarchy of human corneal stroma within thin stacks of lamellae-like tissues, in this case constructed from scaffolds constructed with RGD-coupled, patterned, porous, mechanically robust and transparent silk films. The influence of RGD-coupling on the orientation, proliferation, ECM organization, and gene expression of hCFs was assessed. RGD surface modification enhanced cell attachment, proliferation, alignment and expression of both collagens (type I and V) and proteoglycans (decorin and biglycan). Confocal and histological images of the lamellar systems revealed that the bio-functionalized silk human cornea 3D constructs exhibited integrated corneal stroma tissue with helicoidal multi-lamellar alignment of collagen-rich and proteoglycan-rich extracellular matrix, with transparency of the construct. This biomimetic approach to replicate corneal stromal tissue structural hierarchy and architecture demonstrates a useful strategy for engineering human cornea. Further, this approach can be exploited for other tissue systems due to the pervasive nature of such helicoids in most human tissues.

Effect of Surface-activated PLLA Scaffold on Apatite Formation in Simulated Body Fluid

Surface-activated poly(L-lactic acid) (PLLA) films and scaffolds were investigated for their effect on the formation of hydroxyapatite (HA) in simulated body fluid (SBF). PLLA samples were treated with plasma discharge in oxygen gas; the activated polymer surfaces were subjected to in situ grafting acrylic acid (AA) monomer. The obtained PLLA-PAA was converted to PLLA-PAA-HA in SBF. The formation of HA crystals was identified by surface analyses and the size and distribution by scanning electron miscroscopy. The major elements of HA surface-modified PLLA were confirmed by electron spectroscopy for chemical analysis and attenuated total reflectance-Fourier transform infrared spectra. Fibroblast, chondrocyte, and osteoblast cells were seeded in scaffolds and cultivated in vitro; the total cellularity was higher in the PLLA-PAA-HA scaffolds than the PLLA and PLLA-HA. Histological staining of the cells was denser in the cell-seeded PLLA-PAA-HA constructs. The introduction of specific functionality on the polymer surface significantly improved apatite nucleation and growth. Thus, HA-formed PLLA scaffolds are potentially useful in musculoskeletal tissue engineering.

Fabrication of porous carbon nanofibers and their application as anode materials for rechargeable lithium-ion batteries

Porous carbon nanofibers were prepared by the electrospinning of a bicomponent polymer solution, followed by thermal treatments under different atmospheres. The surface morphology, thermal properties, and crystalline features of these nanofibers were characterized using various analytic techniques, and it was found that they were formed with turbostratically disordered graphene sheets and had small pores and large surface areas. The unique structure of these porous carbon nanofibers resulted in good electrochemical performance such as high reversible capacity and good cycle stability when they were used as anodes for rechargeable lithium-ion batteries.

Beneficial effect of hydrophilized porous polymer scaffolds in tissue-engineered cartilage formation

Three dimensional (3D) porous poly(L-lactic acid) (PLLA) scaffolds were fabricated using a modified gas foaming method whose effervescent porogens were a mixture of sodium bicarbonate and citric acid. To improve chondrocyte adhesion, the scaffolds were then hydrophilized through oxygen plasma treatment and in situ graft polymerization of acrylic acid (AA). When the physical properties of AA-grafted scaffolds were examined, the porosity and pore size were 87 approximately 93% and 100 approximately 300 microm, respectively. The pore sizes were highly dependent on the varying ratios (w/w) between porogen and polymer solution. Influenced by their pore sizes, the compressive moduli of scaffolds significantly decreased with increasing pore size. The altered surface characteristics were clearly reflected in the reduced water contact angles that meant a significant hydrophilization with the modified polymer surface. Electron spectroscopy for chemical analysis (ESCA) and time-of-flight secondary ion mass spectrometer (ToF-SIMS) also confirmed the altered surface chemistry. When chondrocytes were seeded onto the AA-grafted PLLA scaffolds, cell adhesion and proliferation were substantially improved as compared to the unmodified scaffolds. The benefit of the modified scaffolds was clear in the gene expressions of collagen type II that was significantly upregulated after 4-week culture. Safranin-O staining also identified greater glycosaminoglycan (GAG) deposition in the modified scaffold. The AA-grafted porous polymer scaffolds were effective for cell adhesion and differentiation, making them a suitable platform for tissue-engineered cartilage.

Surface-initiated, ring-opening metathesis polymerization: formation of diblock copolymer brushes and solvent-dependent morphological changes

In this article, we report the formation of diblock copolymer brushes on a gold surface by surface-initiated, ring-opening metathesis polymerization (SI-ROMP) with the newly developed ruthenium catalyst [(H2IMes)(3-Br-py)2(Cl)2Ru=CHPh]. Taking advantage of the highly improved activity of the ruthenium catalyst and the rapid initiation step of ROMP, we successfully formed thin films of well-defined block copolymers with 5-norbornene-2-endo,3-endo-dimethanol and norbornene carboxylic acid methyl esters (44:56 endo/exo). The catalyst was found to be active enough to polymerize endo isomers of norbonene derivatives from the surface as well as to form diblock copolymer brushes. SI-ROMP of diblock copolymers from the surface was confirmed by ellipsometry, infrared spectroscopy, and X-ray photoelectron spectroscopy. After the formation, the polymer-grafted substrates were immersed in various solvents, and the selective swelling characteristics of polymer brushes were investigated by atomic force microscopy.