Recent advances in the stereochemistry of metallotetrapyrroles

Control of spin coupling through a redox-active bridge in a dinickel(II) porphyrin dimer: step-wise oxidations enable isolations of a chlorin-porphyrin heterodimer and a dication diradical with a singlet ground state

A dinickel(II)porphyrin dimer has been used here in which the redox-active pyrrole-moiety, similar to the tryptophan residue in diheme enzymes such as MauG and bCcP, has been placed between two Ni(II)porphyrin centers connected via a flexible, but unconjugated methylene bridge. This arrangement provides a large physical separation between the two metal centers and thus displays almost no communication between them through the bridge. Upon treatment with DDQ as an oxidant, the dinickel(II) porphyrin dimer slowly gets converted into an indolizinium-fused chlorin-porphyrin heterodimer. However, oxidations of the dinickel(II) porphyrin dimer up to two oxidizing equivalents using oxidants such as AgSbF₆ and FeCl₃ resulted in the formation of a dication diradical complex. Interestingly, in order to stabilize such a highly oxidized dication diradical, two non-conjugated methylene spacers undergo facile 2e^-/-2H⁺ oxidation to make the bridge fully π-conjugated for promoting through-bond communication. Through the oxidized and conjugated bridge, two porphyrin π-cation radicals display considerable communications leading to an efficient intramolecular spin coupling to form a singlet state. Interestingly, the redox-active nature of the bridge controls the electronic communication just by simple oxidation or reduction, and thereby, acts as a molecular switch for efficient magnetic relay.

Thermal and photoinduced electron transfer reactions of phthalocyanine complexes of Zn(II) and Cu(II) in acetonitrile

Phthalocyanine that has four peripheral 2-methoxyphenyl substituents at the α-position and its Zn(II) and Cu(II) complexes were synthesized. Chemical oxidation by the Cu(II) ion and electrochemical oxidation of these metal complexes were investigated spectrophotometrically in acetonitrile. The UV-visible absorption spectra of these metal complexes and their one-electron oxidized π-cation radicals showed no concentration dependence, indicating that these species exist as monomers in solution. Kinetics of the thermal electron transfer reaction from each phthalocyanine complex to Cu²⁺ and the photoinduced electron transfer reaction of the Zn(II) phthalocyanine complex with V(V) and V(IV) Schiff base complexes were studied using conventional spectrophotometric and transient absorption techniques, and the electron transfer rate constants were analysed using the Marcus cross relationship. The obtained rate constants of the electron self-exchange reaction between the parent phthalocyanine complexes and their π-cation radicals were in the order of 10⁹ to 10¹¹ M^-1 s^-1 at T = 298.2 K. These large electron self-exchange rate constants are consistent with the phthalocyanine-centred redox reactions where small reorganization energies are required with little structural change during the electron transfer process.

Nonplanar porphyrins: synthesis, properties, and unique functionalities

Porphyrins are variously substituted tetrapyrrolic macrocycles, with wide-ranging biological and chemical applications derived from metal chelation in the core and the 18π aromatic surface. Under suitable conditions, the porphyrin framework can deform significantly from regular planar shape, owing to steric overload on the porphyrin periphery or steric repulsion in the core, among other structure modulation strategies. Adopting this nonplanar porphyrin architecture allows guest molecules to interact directly with an exposed core, with guest-responsive and photoactive electronic states of the porphyrin allowing energy, information, atom and electron transfer within and between these species. This functionality can be incorporated and tuned by decoration of functional groups and electronic modifications, with individual deformation profiles adapted to specific key sensing and catalysis applications. Nonplanar porphyrins are assisting breakthroughs in molecular recognition, organo- and photoredox catalysis; simultaneously bio-inspired and distinctly synthetic, these molecules offer a new dimension in shape-responsive host-guest chemistry. In this review, we have summarized the synthetic methods and design aspects of nonplanar porphyrin formation, key properties, structure and functionality of the nonplanar aromatic framework, and the scope and utility of this emerging class towards outstanding scientific, industrial and environmental issues.

Metalloporphyrin Metal–Organic Frameworks: Eminent Synthetic Strategies and Recent Practical Exploitations

The emergence of metal–organic frameworks (MOFs) in recent years has stimulated the interest of scientists working in this area as one of the most applicable archetypes of three-dimensional structures that can be used as promising materials in several applications including but not limited to (photo-)catalysis, sensing, separation, adsorption, biological and electrochemical efficiencies and so on. Not only do MOFs have their own specific versatile structures, tunable cavities, and remarkably high surface areas, but they also present many alternative procedures to overcome emerging obstacles. Since the discovery of such highly effective materials, they have been employed for multiple uses; additionally, the efforts towards the synthesis of MOFs with specific properties based on planned (template) synthesis have led to the construction of several promising types of MOFs possessing large biological or bioinspired ligands. Specifically, metalloporphyrin-based MOFs have been created where the porphyrin moieties are either incorporated as struts within the framework to form porphyrinic MOFs or encapsulated inside the cavities to construct porphyrin@MOFs which can combine the peerless properties of porphyrins and porous MOFs simultaneously. In this context, the main aim of this review was to highlight their structure, characteristics, and some of their prominent present-day applications.

Synthesis, Characterization, DFT and Photocatalytic Studies of a New Pyrazine Cadmium(II) Tetrakis(4-methoxy-phenyl)-porphyrin Compound

This study describes the synthesis, theoretical investigations, and photocatalytic degradational properties of a new (pyrazine)(meso-tetrakis(4-tert-methoxyphenyl)-porphyrinato)-cadmium (II) ([Cd(TMPP)-Pyz]) complex (1). The new penta-coordinated Cd^II porphyrin complex (1) was characterized by various spectroscopic techniques, including FT-IR, NMR, UV-visible absorption, fluorescence emission, and singlet oxygen, while its molecular structure was studied using single crystal X-ray diffraction. The UV–Vis spectroscopic study highlighted the redshift of the absorption bands after the insertion of the Cd(II) metal ion into the TMPP ring. The co-coordination of the pyrazine axial ligand enhanced this effect. A fluorescence emission spectroscopic study showed a significant blueshift in the Q bands, accompanied by a decrease in the fluorescence emission intensity and quantum yields of Φ_f = 0.084, Φ_f = 0.06 and Φ_f = 0.03 for H₂-TMPP free-base porphyrin, [Cd(TMPP)] and [Cd(TMPP)(Pyz)] (1) respectively. Singlet oxygen revealed that the H₂-TMPP porphyrin produced the most efficient singlet oxygen quantum yield of (Φ_Δ = 0.73) compared to [CdTMPP] (Φ_Δ = 0.57) and [Cd(TMPP)(Pyz)] (1) (Φ_Δ = 0.13). In the crystal lattice, the [Cd(TMPP)Pyz] was stabilized through non-covalent intermolecular interactions (NCI), such as the hydrogen bonds C-H···N and C-H···Cg. Additionally, crystal explorer software was then utilized to measure the quantitative analysis of the intermolecular interactions in the unit cell of the crystal structure and established that the C-H···π interaction dominated. The Natural bond orbital (NBO) analysis revealed that each molecule is stabilized by hyperconjugation and charge delocalization. As a photocatalyst, the coordination complex 1 showed excellent photocatalytic activity toward the degradation of Levafix Blue CA reactive dye (i.e., dye photo-degradation of 80%).

Dimeric Corrole Analogs of Chlorophyll Special Pairs

Chlorophyll special pairs in photosynthetic reaction centers function as both exciton acceptors and primary electron donors. Although the macrocyclic natural pigments contain Mg(II), the central metal in most synthetic analogs is Zn(II). Here we report that insertion of either Al(III) or Ga(III) into an imidazole-substituted corrole affords an exceptionally robust photoactive dimer. Notably, attractive electronic interactions between dimer subunits are relatively strong, as documented by signature changes in NMR and electronic absorption spectra, as well as by cyclic voltammetry, where two well-separated reversible redox couples were observed. EPR spectra of one-electron oxidized dimers closely mimic those of native special pairs, and strong through-space interactions between corrole subunits inferred from spectroscopic and electrochemical data are further supported by crystal structure analyses (3 Å interplanar distances, 5 Å lateral shifts, and 6 Å metal to metal distances).

Linkage Isomers of 4-Methylimidazolate Mn(II) Porphyrinates: Hindered or Unhindered?

Three different manganese(II) porphyrins have been exploited to react with 4-methylimidazolate (4-MeIm^-), and the five-coordinate products are characterized by ultraviolet-visible, single-crystal X-ray, and electronic paramagnetic resonance spectroscopies. Interestingly, 4-MeIm^- is found to bond to the metal center through either of the two N atoms (N1 or N3), which yielded two linkage isomers with either an unhindered or a hindered ligand conformation, respectively. Investigations revealed it is the large metal out-of-plane displacements (Δ₂₄ and Δ₄ ≥ 0.59 Å) that have rendered the equivalence of two isomers with a small energy difference (5.2-8.3 kJ/mol). The nonbonded intra- and intermolecular interactions thus become crucial factors in the balance of linkage isomerization. All of the products in both solution and solid states show the same characteristic resonances of high-spin Mn(II) (S = ⁵/₂) with g_⊥ ≈ 5.9 and g_∥ ≈ 2.0 at 4 K, consistent with the weak effects of the axial ligand on core conformation and metal electronic configurations. Zero-field splitting parameters obtained through simulations are also reported.

The Simplest Iron μ-oxo Species. The Molecular Structure of {[Fe(porphine)]2O}

We have prepared a new [Formula: see text]-oxo iron(III) porphyrin complex based on the simplest possible porphyrin ligand, porphine. Our structure determination for {[Fe(porphine)]2O}shows that it has a decidedly different molecular structure compared to all other [Formula: see text]-oxo iron(III)porphyrin complexes with two independent porphyrin ligands. The Fe–O–Fe angle is 153.21 (16)[Formula: see text]which leads to a small interplanar angle of 22.7[Formula: see text]between the two porphine rings. This also leads to C[Formula: see text]C nonbonded contact as short as 3.35Å between the two rings. The twist angle of the two porphine rings is 16.8[Formula: see text]. Other structural features are in general accord with those expected for high-spin iron(III) porphyrinates.

Weak Interactions and Conformational Changes in Core-Protonated A2- and Ax-Type Porphyrin Dications

Individual chemical motifs are known to introduce structural distortions to the porphyrin macrocycle, be it in the core or at the periphery of the macrocycle. The interplay when introducing two or more of these known structural motifs has been scarcely explored and is not necessarily simply additive; these structural distortions have a chance to compound or negate to introduce new structural types. To this end, a series of compounds with complementary peripheral (5,15-disubstitution) and core (acidification) substitution patterns were investigated. The single-crystal X-ray structures of 18 5,15-diphenylporphyrin, 5,15-diphenylporphyrindi-ium diacid, and related compounds are reported, including the first example of a 5,15-dialkylporphyrindi-ium. Normal-coordinate structural decomposition (NSD) analysis is used for a detailed analysis of the conformation of the porphyrin subunit within the crystal structures. An elongation of porphyrin macrocycles along the C₅,C₁₅- axis (B_2g symmetry) is observed in all of the free base porphyrins and porphyrin dications; distance across the core is around 0.3 Å in the free base and diacid compounds, and more than doubled in 5,15-dipentylporphyrin and 5,15-dipentylporphyrindi-ium diacid. While the free base porphyrins are largely planar, a large out-of-plane distortion can be observed in 5,15-diphenylporphyrin diacids, with the expected “projective saddle” shape characteristic for such systems. The combination of these two distortions (B_2u and B_2g) from regular porphyrin structure results in a macrocycle best characterized in the chiral point-group D₂. A rare structural type of a cis-hydrogen bond chelate is observed for 5,15-dipentylporphyrindi-ium diacid, which adopts an achiral C_2v symmetry. Crystallographic data indicate that the protonated porphyrin core forms hydrogen bonding chelates (N-H⋯X⋯H-N) to counter-anions. Weaker interactions, such as induced intramolecular C-H⋯O interactions from the porphyrin periphery are described, with distances characteristic of charge-assisted interactions. This paper offers a conceptual framework for accessing porphyrin macrocycles with designable distortion and symmetry, useful for the selective perturbation of electronic states and a design-for-application approach to solid state porphyrin materials.

Interaction of manganese corroles with TCNQ and related acceptor molecules

Manganese corroles with the Mn atom in the oxidation states +III and +IV have been probed as donor moieties for supramolecular stacked donor–acceptor complexes with the typical acceptor units TCNQ (tetracyanoquinone), TCNP (tetracyanopyrazine), and TCNB (tetracyanobenzene). Four new compounds formed as single crystals from different co-crystallization attempts. In those cases where a Mn(III) corrole was used as the donor component, hydrolyzed and/or oxygenated compounds [(cor)Mn(TCNQ*)] and [(cor*)Mn(TCNP*)] were obtained as the exclusive products. With chloridomanganese(IV) corroles, sandwich-like 2:1 complexes [(cor)MnCl][Formula: see text][TCNQ] and [(cor)MnCl][Formula: see text][TCNB] form, with both components left intact. Crystallographic analyses reveal partial or complete charge transfer to unusual axial ligands and thus prove the high reactivity of Mn(III) corroles in the first two cases. For the sandwich arrangements, almost-unaltered geometric parameters of the Mn(IV) corroles are observed, pointing to negligible structural consequences for metal corroles when engaged in stacking interactions.

Hydration of Closely Related Manganese and Magnesium Porphyrins in Aqueous Solutions: Ab Initio Quantum Mechanical Charge Field Molecular Dynamics Simulation Study

To the best of our knowledge, the current study based on ab initio quantum mechanical charge field molecular dynamics (QMCF-MD) is the first to explore the difference in the hydration behavior between Mn(II)- and Mg(II)-associated porphyrins (Mn(II)-POR and Mg(II)-POR) in aqueous solution. The simulation study highlights similar and dissimilar characteristics of the structural, dynamical, and thermodynamical properties of these closely related metals bound to porphyrins in aqueous solution. The structural analysis is based on radial and angular distribution functions, coordination number distributions, and angular-radial distributions. Both hydrated systems demonstrate similar pentacoordinated structures formed via the axial coordination of one water molecule to the metal ion in addition to the four nitrogen atoms of the porphyrin ring. However, in the case of Mn(II)-POR, the formation of a distorted square pyramidal geometry was observed. It was envisaged as a weak coordination of the water molecule to the Mn(II) atom and thus higher atomic fluctuation for all atoms in contrast to that for the hydrated Mg(II)-POR. The dynamical data in terms of the mean residence times, velocity autocorrelation function, free energy, and other parameters revealed the difference in the metal binding effect because the Mn(II) atom was observed to inhibit H-bond formation more than the presence of Mg(II) atoms in the core of the porphyrin. The current study thus highlights the significant differences in the structural and dynamical properties of Mn(II)- and Mg(II)-associated porphyrin systems.

Single hydroxo-bridged group 13 metalloporphyrin dimers: Solution studies and solid-state structures

The syntheses of indium, gallium and aluminum porphyrin dimers with a single hydroxo-bridge, [Formula: see text][M(Porph)]2(OH)[Formula: see text], are described. Emphasis is given to indium and gallium derivatives. The X-ray structures for [Formula: see text] [Ga(OEP)]2(OH)[Formula: see text] ClO4 and [Formula: see text] [In(OEP)]2(OH)[Formula: see text] ClO4 (two forms) are presented. The dimeric molecules can be synthesized by the acid-treatment of the corresponding hydroxo-ligated monomeric complexes [M(OEP)(OH)] and [M(TPP)(OH)]. The nature of the starting material (the hydroxo-ligated monomer) was first suggested by IR spectroscopy and further proved by proton-deuterium exchange followed by 1H NMR spectroscopy. The structure of a monomeric indium hydroxide complex, [In(OEP)(OH)], is also presented. The synthesis of the dimer for all metals can be monitored by UV-vis spectroscopy, which clearly demonstrates that a blue-shift of the Soret band accompanies formation of the dimer from the monomer. A strong [Formula: see text]–[Formula: see text]interaction between the two porphyrin rings of these [Formula: see text]-hydroxo-bridged dimers is confirmed both by solution state studies (1H NMR and UV-vis spectroscopy) and the X-ray structures of [Formula: see text] [M(OEP)]2(OH)[Formula: see text] ClO4 (M = In, Ga). In addition, exposure of methylene chloride solutions of these bridged complexes to white light afforded the corresponding chloro derivatives, [M(Porph)Cl]. The stereochemistry of a range of [Formula: see text]-hydroxo dimers is discussed and DFT simulations at the HSEH1PBE/SDD level of theory provide suitable structural models and further electronic structure insights on selected [Ga(Porph)(OH)] and [Formula: see text] [Ga(Porph)]2(OH)[Formula: see text][Formula: see text] derivatives.

Interactions of acetamide and acrylamide with heme models: Synthesis, infrared spectra, and solid state molecular structures of five- and six-coordinate ferric porphyrin derivatives

The amide functional group is a fundamental building block of proteins, but is also present in several industrial chemicals such as acetamide and acrylamide. Some acetamide derivatives are known to deplete cytoplasmic heme, and some acrylamide derivatives are known to cause porphyria and may activate soluble guanylyl cyclase through a heme-dependent mechanism. We have prepared a representative set of six-coordinate acetamide and acrylamide (L) complexes of iron porphyrins of the form [(por)Fe(L)₂]ClO₄ (por = TPP (tetraphenylporphyrinato dianion), T(p-OMe)PP (tetrakis(p-methoxyphenyl)porphyrinato dianion)) in 76-83% yields. We have also prepared the five-coordinate derivatives [(OEP)Fe(L)]ClO₄ (OEP = octaethylporphyrinato dianion) in 68-75% yields. These compounds were characterized by IR spectroscopy and by single-crystal X-ray crystallography. The molecular structures reveal the monodentate O-binding of the acetamide and acrylamide ligands to the ferric centers, with variable H-bonding exhibited between the acetamide/acrylamide -NH₂ moieties and the perchlorate anions. The five-coordinate OEP derivatives exhibit a π-π stacking of their porphyrin macrocycles, with the acetamide complex in the Class I and the acrylamide complex in the Class S groups. These compounds represent the first structurally characterized acetamide and acrylamide adducts of iron porphyrins. Reactions of the six-coordinate derivatives with NO result in the nitrosyl [(por)Fe(NO)(L)]ClO₄ derivatives that have been characterized by IR spectroscopy.

Molecular Engineering of Free-Base Porphyrins as Ligands-The N-H⋅⋅⋅X Binding Motif in Tetrapyrroles

The core N-H units of planar porphyrins are often inaccessible to forming hydrogen-bonding complexes with acceptor molecules. This is due to the fact that the amine moieties are "shielded" by the macrocyclic system, impeding the formation of intermolecular H-bonds. However, methods exist to modulate the tetrapyrrole conformations and to reshape the vector of N-H orientation outwards, thus increasing their availability and reactivity. Strategies include the use of porpho(di)methenes and phlorins (calixphyrins), as well as saddle-distorted porphyrins. The former form cavities due to interruption of the aromatic system. The latter are highly basic systems and capable of binding anions and neutral molecules via N-H⋅⋅⋅X-type H-bonds. This Review discusses the role of porphyrin(oid) ligands in various coordination-type complexes, means to access the core for hydrogen bonding, the concept of conformational control, and emerging applications, such as organocatalysis and sensors.

Diaqua-β-octaferrocenyltetraphenylporphyrin: a multiredox-active and air-stable 16π non-aromatic species

Herein the synthesis and properties of the first β-octaferrocenyltetraphenylporphyrin, {TPPFc₈(H₂O)₂}, in its extraordinary stable and non-aromatic 16π form are reported, showing seven separate reversible redox events.

A counter ion triggers stabilization of two geometrical isomers of a Ni(ii) dication diradical porphyrin dimer: the role of anion–π interactions

Two isomers of a nickel(ii)porphyrinato dication diradical, isolated selectively in pure form, are stabilized exclusively by anion–π interactions, have unique and distinct electronic and spectroscopic features and display an anion-induced charge/electron transfer phenomenon.

Tetrakis(ethyl-4(4-butyryl)oxyphenyl)porphyrinato zinc complexes with 4,4′-bpyridin: synthesis, characterization, and its catalytic degradation of Calmagite

This work reports on the synthesis and characterization of a new porphyrins complex:[Zn(TEBOP)(4,4′-bpy)](4,4′-bipyridine)(5,10,15,20-(tetraethyl-4(4-butyryl)oxyphenyl)porphyrinato)zinc(ii) (3). Single crystal X-ray diffraction, photophysical and electrochemical characteristics were studied. The prepared complex, penta-coordinated zinc(ii) porphyrin derivatives shows moderate ruffling distortion and the zinc atom is nearly planar with the porphyrin core. Tolyl and ethyl-4(4-butyryl)oxyphenyl) moieties at the meso positions present a bathochromic shift of the absorption bands, and a notable increase in the absorption coefficient of the Q(0,0) and Q(0,1) bands was observed with a higher fluorescence quantum yield and lifetime compared with the free base porphyrin. The electrochemical investigation shows a reversible reduction of the synthesized complexes. The catalytic power and the adsorption properties of the prepared complexes were studied for Calmagite degradation, an azoic organic dye. The results reveal that the studied compounds could be used as catalysts for the decolourisation of dyes in the presence of H₂O₂.

This work reports on the synthesis and characterization of a new porphyrins complex:[Zn(TEBOP)(4,4′-bpy)](4,4′-bipyridine)(5,10,15,20-(tetraethyl-4(4-butyryl)oxyphenyl)porphyrinato)zinc(ii)(3).

Multiheme proteins: effect of heme–heme interactions

This Frontier illustrates a brief personal account on the effect of heme–heme interactions in dihemes which thereby discloses some of the evolutionary design principles involved in multiheme proteins for their diverse structures and functions.

Alternant Bond Distances in Octaethylporphyrin π-Cation Radicals

The possible appearance and nature of alternant bond distance patterns in the inner 16-membered ring of several octaethylporphyrin [Formula: see text]-cation radicals has been investigated. This study was made possible by recognizing an unexpected solvent system, namely dichloromethane/chloroform, even though the [Formula: see text]-cation species have extremely limited solubility in chloroform. A total of six [M(OEP[Formula: see text]][Formula: see text] derivatives were studied by single-crystal X-ray structure determinations. Two new zinc derivatives display, quantitatively, the same alternant pattern observed previously. A new nickel complex shows a smaller but now probably significant alternant pattern. However, a copper derivative, independently analyzed twice, shows no evidence for an alternant pattern. The importance of ring–ring interactions on the energy of the top two orbitals is shown by two distinct magnesium derivatives. The derivative with strongly overlapped rings displays an alternant bond distance pattern, whereas the other, with a modestly overlapped ring pair, does not. This suggests the importance of strong ring–ring interactions in leading to a pseudo-Jahn-Teller state; this hypothesis is also supported by other prior results.

Synthesis and characterization of β,β′-linked porphyrin-chlorin heterodimers and their metallic complexes

Two β,β′-linked porphyrin-chlorin heterodimers have been successfully synthesized with 4-fluorophenyl or 4-chlorophenyl substituted aldehyde as starting reagents. But those aldehydes with bulkier substituents did not lead to the corresponding heterodimers. These porphyrin-chlorin heterodimers and their metallic complexes have been characterized by X-ray crystallography. In all the structures, the pyrroline group in chlorin moiety and the pyrrole group in porphyrin moiety are directly connected by a single bond. Pyrroline ring has two sp[Formula: see text] hybridized carbons. The direct bonding makes the porphyrin and chlorin moieties closely contact with each other, pyrroline group and the pyrrole group forms a dihedral angle of ~70°. If porphyrin-chlorin heterodimers have bulkier substituents, the close contact could cause too much repulsion. That is probably why they can not be synthesized. For nickel complexes, the chlorin planes show large saddling and moderate ruffling conformation. The C–H⋯[Formula: see text] interaction could contribute to the saddling conformation. The distorted core makes dihedral angles and metal to metal distances between porphyrin and chlorin plane much smaller than those in their copper complexes. Their NMR, UV-visible and fluorescence spectral data have also been briefly discussed.

Fluorescent Properties and Kinetic Rate Constants of some Zn-Tetraarylporphyrins Formation in Acetonitrile

The fluorescence quantum yield of the 5,10,15,20-tetraphenylporphyrin, 5,10,15,20-tetra(4-OH-phenyl)porphyrin, 5,10,15,20-tetra(4-Cl-phenyl)porphyrin, 5,10,15,20-tetra(4-NH₂-phenyl)porphyrin and their complexes with Zn²⁺ have been determined and the kinetic rate constants of the porphyrins ligands complexation with Zn²⁺ in acetonitrile have been estimated. It was shown that the substituents on the tetrapyrrolic macrocycle periphery have a strong influence on the fluorescent and coordination properties of the investigated porphyrins.