[Injuries of the thoracic and lumbar spine]

Concomitant and previous osteoporotic vertebral fractures

Background and purpose - Patients with osteoporosis who present with an acute onset of back pain often have multiple fractures on plain radiographs. Differentiation of an acute osteoporotic vertebral fracture (AOVF) from previous fractures is difficult. The aim of this study was to investigate the incidence of concomitant AOVFs and previous OVFs in patients with symptomatic AOVFs, and to identify risk factors for concomitant AOVFs. Patients and methods - This was a prospective epidemiological study based on the Registry of Pathological Osteoporotic Vertebral Fractures (REPAPORA) with 1,005 patients and 2,874 osteoporotic vertebral fractures, which has been running since February 1, 2006. Concomitant fractures are defined as at least 2 acute short-tau inversion recovery (STIR-) positive vertebral fractures that happen concomitantly. A previous fracture is a STIR-negative fracture at the time of initial diagnostics. Logistic regression was used to examine the influence of various variables on the incidence of concomitant fractures. Results - More than 99% of osteoporotic vertebral fractures occurred in the thoracic and lumbar spine. The incidence of concomitant fractures at the time of first patient contact was 26% and that of previous fractures was 60%. The odds ratio (OR) for concomitant fractures decreased with a higher number of previous fractures (OR =0.86; p = 0.03) and higher dual-energy X-ray absorptiometry T-score (OR =0.72; p = 0.003). Interpretation - Concomitant and previous osteoporotic vertebral fractures are common. Risk factors for concomitant fractures are a low T-score and a low number of previous vertebral fractures in cases of osteoporotic vertebral fracture. An MRI scan of the the complete thoracic and lumbar spine with STIR sequence reduces the risk of under-diagnosis and under-treatment.

[Traumatology of the spine]

Spinal trauma poses considerable threats to survival and quality of life. Especially cervical spine injuries are often associated with neurologic deficits. A thorough diagnostic pathway, often including computed tomography with sagittal reconstruction, is mandatory to evaluate the extent and consequences of spinal trauma. Every treatment must aim to restore stability and prevent secondary neurologic deterioration. Compression fractures usually can be treated successfully with conservative treatment, while burst fractures usually, and flexion/distraction injuries, and fracture-dislocation generally require internal stabilization. Injuries of the upper cervical spine can be treated conservatively or operatively, depending on the degree of instability. In the lower cervical spine, most injuries require internal fixation.

A CT-free, intra-operative planning and navigation system for minimally invasive anterior spinal surgery - an accuracy study

OBJECTIVE

A comprehensive study was performed to evaluate the accuracy of a newly developed CT-free, intra-operative planning and navigation system for anterior spine surgery.

MATERIALS AND METHODS

Instruments and an image intensifier were tracked using the SurgiGATE navigation system. A laboratory study was performed on 27 plastic vertebrae. Fiducial markers were implanted in the vertebrae for accuracy evaluation purposes, and a dynamic reference base was placed on the vertebrae to establish a patient coordinate system (P-COS). Two fluoroscopic images were used for intra-operative planning. The graft bed plan was recorded in P-COS, followed by surgical formation of the graft bed, which was visualized. To evaluate the accuracy, the vertebrae were scanned with CT, and the markers were used to calculate an accurate paired-point registered transformation between the CT coordinate system and P-COS.

RESULTS

Using the new SPO module, accurate planning and navigation of a resection of the vertebral body is possible using two fluoroscopic images. The overall mean error between the planned resection volume and the actual resection was 0.98 mm. In addition, the module can serve as an educational tool for training spine surgeons.

CONCLUSIONS

The new fluoroscopy-based system can be used safely for accurate performance of anterior resection during spondylodesis. New methods for safe and accurate registration during anterior spine surgery need to be developed.

Two column lesions in the thoracolumbar junction: anterior, posterior or combined approach? A comparative biomechanical in vitro investigation

There are various surgical techniques for the treatment of spinal fractures in the thoracolumbar region. Several implants have been developed for anterior or posterior instrumentation. Optimal treatment of unstable thoracolumbar osseous and ligamentous injuries remains controversial. To compare the stabilizing effects of an antero-lateral, thoracoscopically implantable plate system (macsTL, Aesculap, Germany) with the stability provided by a fixateur interne (SOCON, Aesculap, Germany), this in vitro investigation examined six human bisegmental (T12-L2) spinal units. Specimens were tested intact, and with simulation of osseous lesions in the anterior and ligamentous lesions in the posterior column (combined A/B-fracture). While loaded in the main anatomical planes such as flexion/extension, left and right lateral bending and left and right axial rotation with a bending moment of 7.5 Nm in a special testing jigs, motion analysis was performed. Quantitative interpretation of the stabilizing effect was achieved using a contactless three-dimensional motion analysis system. Each specimen was tested in four different scenarios: the first step measured movements of intact spinal segments. For the second step, specimens underwent simulation of combined A/B-fracture provided with bisegmental (T12/L2) antero-lateral fixation and bone strut graft from the iliac crest. For the third step, segments were additionally stabilized by the fixateur interne. The last measurement (fourth step) was performed after removing the anterior instrumentation. Range of motion (ROM) values were compared and statistically evaluated. Compared to the intact specimens the anterior instrumentation of the combined lesion, simulated A/B-fracture, leads to a stabilizing effect in flexion/extension and lateral bending. In contrast to these findings the torsional instability increased for the upper segment and bisegmentally. A maximum rigidity, beyond intact values, was registered for each anatomical plane with the combined instrumentation: antero-lateral and fixateur interne. After removing the anterior screw plate system maximum movements, in all segments for flexion/extension and lateral bending, bisegmentally and for the upper segment in axial rotation, were less than ROM values measured with the anterior system only. With respect to these findings a combined ventro-dorsal stabilization procedure should be considered for ligamentous disruptions of the posterior column in combination with A-fractures in the thoracolumbar junction.

Experiments on robot-assisted navigated drilling and milling of bones for pedicle screw placement

BACKGROUND

This article presents experimental results for robot-assisted navigated drilling and milling for pedicle screw placement. The preliminary study was carried out in order to gain first insights into positioning accuracies and machining forces during hands-on robotic spine surgery. Additionally, the results formed the basis for the development of a new robot for surgery.

METHODS

A simplified anatomical model is used to derive the accuracy requirements. The experimental set-up consists of a navigation system and an impedance-controlled light-weight robot holding the surgical instrument. The navigation system is used to position the surgical instrument and to compensate for pose errors during machining. Holes are drilled in artificial bone and bovine spine. A quantitative comparison of the drill-hole diameters was achieved using a computer.

RESULTS

The interaction forces and pose errors are discussed with respect to the chosen machining technology and control parameters. Within the technological boundaries of the experimental set-up, it is shown that the accuracy requirements can be met and that milling is superior to drilling.

CONCLUSIONS

It is expected that robot assisted navigated surgery helps to improve the reliability of surgical procedures. Further experiments are necessary to take the whole workflow into account.

The influence of posterior instrumentation on adjacent and transfixed facet joints in patients with thoracolumbar spinal injuries: a morphological in vivo study using computerized tomography osteoabsorptiometry

STUDY DESIGN

Subchondral mineralization of adjacent and transfixed facet joints was analyzed in patients with thoracolumbar spinal injuries, both before posterior instrumentation and after removal of the spinal implant.

OBJECTIVE

To examine the influence of posterior instrumentation on content and distribution of subchondral mineralization as a correlate of the long-term load acting on the adjacent and transfixed zygapophysial joints.

SUMMARY OF BACKGROUND DATA

Posterior stabilization plays an important role in the treatment of spinal injuries and is a standard technique for the treatment of thoracolumbar spinal fractures. Studies have shown that stress and motion in the adjacent segments are altered in the presence of instrumentation.

METHODS

Twenty-three patients with thoracolumbar spinal injuries had computerized tomography (CT) during the course of routine posttraumatic diagnostics and subsequently received bisegmental posterior fixation with an internal fixator. Second CT were obtained after removal of the fixation device, which was performed on an average of 9.4 months after the trauma. Patients were divided into 2 groups with follow-up CT taken within either less than 3 months (group A: average 7.3 days, 15 patients) or 6 and more months (group B: average 17 months, 8 patients) after the internal fixator had been removed. Quantitative and qualitative CT osteoabsorptiometry were used to assess changes in subchondral mineralization, reflecting the altered load acting on the adjacent and bridged zygapophysial joints.

RESULTS

There was a significant difference between preoperative and postoperative calcium values (P < 0.001) for the whole patient group. Mineralization decrease was significantly more often found than increase (P < 0.001). A separate analysis of the 2 groups of patients revealed significant differences between group A and B (P < 0.001). In group A, a mineralization decrease was found in 61.3% and an increase in 11.0% of the facet joints, while in group B, a mineralization decrease was shown in 21.9% and an increase in 41.0%. No significant differences between adjacent and transfixed facets were found except in group B, in which the suprajacent joints showed a significantly higher mineralization increase than the transfixed joints (P = 0.030).

CONCLUSIONS

Decrease in subchondral mineralization indicates reduced load acting on the examined zygapophysial joints. This finding in patients with early follow-up CT seems to be caused by reduced activity in most of the patients until removal of the spinal implant. In patients with longer intervals between removal of the fixator and second CT, higher loads acting on the adjacent and bridged joints are shown morphologically. Whether or not these changes lead to spondylarthritis has to be studied in a long-term follow-up.

Is a single anterolateral screw-plate fixation sufficient for the treatment of spinal fractures in the thoracolumbar junction? A biomechanical in vitro investigation

Controversy exists about the indications, advantages and disadvantages of various surgical techniques used for anterior interbody fusion of spinal fractures in the thoracolumbar junction. The purpose of this study was to evaluate the stabilizing effect of an anterolateral and thoracoscopically implantable screw-plate system. Six human bisegmental spinal units (T12-L2) were used for the biomechanical in vitro testing procedure. Each specimen was tested in three different scenarios: (1) intact spinal segments vs (2) monosegmental (T12/L1) anterolateral fixation (macsTL, Aesculap, Germany) with an interbody bone strut graft from the iliac crest after both partial corpectomy (L1) and discectomy (T12/L1) vs (3) bisegmental anterolateral instrumentation after extended partial corpectomy (L1), and bisegmental discectomy (T12/L1 and L1/L2). Specimens were loaded with an alternating, nondestructive maximum bending moment of +/-7.5 Nm in six directions: flexion/extension, right and left lateral bending, and right and left axial rotation. Motion analysis was performed by a contact-less three-dimensional optical measuring system. Segmental stiffness of the three different scenarios was evaluated by the relative alteration of the intervertebral angles in the three main anatomical planes. With each stabilization technique, the specimens were more rigid, compared with the intact spine, for flexion/extension (sagittal plane) as well as in left and right lateral bending (frontal plane). In these planes the bisegmental instrumentation compared to the monosegmental case had an even larger stiffening effect on the specimens. In contrast to these findings, axial rotation showed a modest increase of motion after bisegmental instrumentation. To conclude, the immobilization of monosegmental fractures in the thoracolumbar junction can be secured by means of bone grafting and the implant used in this study for all three anatomical planes. After bisegmental anterolateral stabilization a sufficient reduction of the movements was registered for flexion/extension and lateral bending. However, the observed slight increase of the range of motion in the transversal plane may lead to loosening of the implant before union. Therefore, the use of an additional dorsal fixation device should be considered.