Spectroscopic studies of the tungsten-containing formaldehyde ferredoxin oxidoreductase from the hyperthermophilic archaeon Thermococcus litoralis

The Development of Tungsten Biochemistry-A Personal Recollection

The development of tungsten biochemistry is sketched from the viewpoint of personal participation. Following its identification as a bio-element, a catalogue of genes, enzymes, and reactions was built up. EPR spectroscopic monitoring of redox states was, and remains, a prominent tool in attempts to understand tungstopterin-based catalysis. A paucity of pre-steady-state data remains a hindrance to overcome to this day. Tungstate transport systems have been characterized and found to be very specific for W over Mo. Additional selectivity is presented by the biosynthetic machinery for tungstopterin enzymes. Metallomics analysis of hyperthermophilic archaeon Pyrococcus furiosus indicates a comprehensive inventory of tungsten proteins.

Steady-state kinetics of the tungsten containing aldehyde: ferredoxin oxidoreductases from the hyperthermophilic archaeon Pyrococcus furiosus

The tungsten containing Aldehyde:ferredoxin oxidoreductases (AOR) offer interesting opportunities for biocatalytic approaches towards aldehyde oxidation and carboxylic acid reduction. The hyperthermophilic archaeon Pyrococcus furiosus encodes five different AOR family members: glyceraldehyde-3-phosphate oxidoreductase (GAPOR), aldehyde oxidoreductase (AOR), and formaldehyde oxidoreductase (FOR), WOR4 and WOR5. GAPOR functions as a glycolytic enzyme and is highly specific for the substrate glyceraldehyde-3-phosphate (GAP). AOR, FOR and WOR5 have a broad substrate spectrum, and for WOR4 no substrate has been identified to date. As ambiguous kinetic parameters have been reported for different AOR family enzymes the steady state kinetics under different physiologically relevant conditions was explored. The GAPOR substrate GAP was found to degrade at 60 °C by non-enzymatic elimination of the phosphate group to methylglyoxal with a half-life t_1/2 = 6.5 min. Methylglyoxal is not a substrate or inhibitor of GAPOR. D-GAP was identified as the only substrate oxidized by GAPOR, and the kinetics of the enzyme was unaffected by the presence of L-GAP, which makes GAPOR the first enantioselective enzyme of the AOR family. The steady-state kinetics of GAPOR showed partial substrate inhibition, which assumes the GAP inhibited form of the enzyme retains some activity. This inhibition was found to be alleviated completely by a 1 M NaCl resulting in increased enzyme activity at high substrate concentrations. GAPOR activity was strongly pH dependent, with the optimum at pH 9. At pH 9, the substrate is a divalent anion and, therefore, positively charged amino acid residues are likely to be involved in the binding of the substrate. FOR exhibited a significant primary kinetic isotope effect of the apparent Vmax for the deuterated substrate, formaldehyde-d₂, which shows that the rate-determining step involves a CH bond break from the aldehyde. The implications of these results for the reaction mechanism of tungsten-containing AORs, are discussed.

Identification of YdhV as the First Molybdoenzyme Binding a Bis-Mo-MPT Cofactor in Escherichia coli

The oxidoreductase YdhV in Escherichia coli has been predicted to belong to the family of molybdenum/tungsten cofactor (Moco/Wco)-containing enzymes. In this study, we characterized the YdhV protein in detail, which shares amino acid sequence homology with a tungsten-containing benzoyl-CoA reductase binding the bis-W-MPT (for metal-binding pterin) cofactor. The cofactor was identified to be of a bis-Mo-MPT type with no guanine nucleotides present, which represents a form of Moco that has not been found previously in any molybdoenzyme. Our studies showed that YdhV has a preference for bis-Mo-MPT over bis-W-MPT to be inserted into the enzyme. In-depth characterization of YdhV by X-ray absorption and electron paramagnetic resonance spectroscopies revealed that the bis-Mo-MPT cofactor in YdhV is redox active. The bis-Mo-MPT and bis-W-MPT cofactors include metal centers that bind the four sulfurs from the two dithiolene groups in addition to a cysteine and likely a sulfido ligand. The unexpected presence of a bis-Mo-MPT cofactor opens an additional route for cofactor biosynthesis in E. coli and expands the canon of the structurally highly versatile molybdenum and tungsten cofactors.

Archaeal transformation of metals in the environment

We are becoming increasingly aware of the role played by archaea in the biogeochemical cycling of the elements. Metabolism of metals is linked to fundamental metabolic functions, including nitrogen fixation, energy production, and cellular processes based on oxidoreductions. Comparative genomic analyses have shown that genes for metabolism, resistance, and detoxification of metals are widespread throughout the archaeal domain. Archaea share with other organisms strategies allowing them to utilize essential metals and maintain metal ions within a physiological range, although comparative proteomics show, in a few cases, preferences for specific genetic traits related to metals. A more in-depth understanding of the physiology of acidophilic archaea might lead to the development of new strategies for the bioremediation of metal-polluted sites and other applications, such as biomining.

New method for the spin quantitation of [4Fe-4S](+) clusters with S = (3)/(2). Application to the FS0 center of the NarGHI nitrate reductase from Escherichia coli

In conventional analyses of g approximately 5 signals given by [4Fe-4S](+) clusters with S = 3/2, the effective g values that cannot be measured in the electron paramagnetic resonance (EPR) spectrum are deduced from rhombograms calculated by assuming that the g matrix is isotropic with g(x) = g(y) = g(z) = 2.00. We have shown that when the two low-field peaks corresponding to the Kramers doublets are visible in the spectrum, a new, independent piece of information about the system can be obtained by studying the temperature dependence of the ratio of the area under these peaks. By applying this method to the g approximately 5 signals displayed by NarGHI nitrate reductase, we were able to determine all the parameters of the spin Hamiltonian of FS0 centers with S = 3/2 and to measure accurately their number. Our results indicate that simple analyses based on the assumption of an isotropic g matrix can give rise to very large errors.

A steady-state and pre-steady-state kinetics study of the tungstoenzyme formaldehyde ferredoxin oxidoreductase from Pyrococcus furiosus

Formaldehyde ferredoxin oxidoreductase from Pyrococcus furiosus is a homotetrameric protein with one tungstodipterin and one [4Fe–4S] cubane per 69-kDa subunit. The enzyme kinetics have been studied under steady-state conditions at 80 °C and pre-steady state conditions at 50 °C, in the latter case via monitoring of the relatively weak (ε ≈ 2 mM⁻¹ cm⁻¹) optical spectrum of the tungsten cofactor. The steady-state data are consistent with a substrate substituted-enzyme mechanism for three substrates (formaldehyde plus two ferredoxin molecules). The K_M value for free formaldehyde (21 μM) with ferredoxin as an electron acceptor is approximately 3 times lower than the value measured when benzyl viologen is used as an acceptor. The K_M of ferredoxin (14 μM) is an order of magnitude less than previously reported values. An explanation for this discrepancy may be the fact that high concentrations of substrate are inhibitory and denaturing to the enzyme. Pre-steady-state difference spectra reveal peak shifts and a lack of isosbestic points, an indication that several processes happen in the first seconds of the reaction. Two fast processes (k_obs1 = 4.7 s⁻¹, k_obs2 = 1.9 s⁻¹) are interpreted as oxidation of the substrate followed by rearrangement of the active site. Alternatively, these processes could be the entry/binding of the substrate followed by its oxidation. The release of the product and the electron shuffling over the tungsten and iron–sulfur center in the absence of an external electron acceptor are slower (k_obs3 = 6.10 × 10⁻² s⁻¹, k_obs4 = 2.18 × 10⁻² s⁻¹). On the basis of these results in combination with results from previous electron paramagnetic resonance studies an activation route plus catalytic redox cycle is proposed.

Redox chemistry of tungsten and iron–sulfur prosthetic groups in Pyrococcus furiosus formaldehyde ferredoxin oxidoreductase

Formaldehyde oxidoreductase (FOR) is one of the tungstopterin iron-sulfur enzymes of the five-membered family of aldehyde oxidoreductases in the hyperthermophilic archaeon Pyrococcus furiosus. In dye-mediated equilibrium redox titrations, the tungsten in active P. furiosus FOR is a two-electron acceptor, W(VI/IV). The intermediate, paramagnetic W(V) state can be trapped only by reduction with substrate, with consecutive one-electron intraprotein electron transfer to the single [4Fe-4S](2+;+) cluster and partial comproportionation of the tungsten over W(IV, V, VI); this is a stable state in the absence of an external electron acceptor. Electron paramagnetic resonance (EPR) spectroscopy reveals a single "low-potential" W(V) spectrum with gxyz values 1.847, 1.898, and 1.972, and a [4Fe-4S]+ cubane in a spin mixture of S = 1/2 (10%) and S = 3/2 (90%) of intermediate rhombicity (E/D = 0.21, greal = 1.91). The development of this intermediate in vitro is slow even at elevated temperature and with a nominal 50:1 excess of substrate over enzyme presumably owing to the very unfavorable hydration equilibrium of the formaldehyde/methylene glycol couple with KD approximately 10(3). Rapid intermediate formation of enzyme at concentrations suitable for EPR spectroscopy (200 microM) is only obtained with extremely high nominal substrate concentration (1 M formaldehyde) and is followed by a slower phase of denaturation. The premise that the free formaldehyde, and not the methylene glycol, is the enzyme's substrate implies that KM for formaldehyde is 3 orders of magnitude less that the previously reported value.

Purification and characterization of the tungsten enzyme aldehyde:ferredoxin oxidoreductase from the hyperthermophilic denitrifier Pyrobaculum aerophilum

A tungsten-containing aldehyde:ferredoxin oxidoreductase (AOR) has been purified to homogeneity from Pyrobaculum aerophilum. The N-terminal sequence of the isolated enzyme matches a single open reading frame in the genome. Metal analysis and electron paramagnetic resonance (EPR) spectroscopy indicate that the P. aerophilum AOR contains one tungsten center and one [4Fe-4S](2+/1+) cluster per 68-kDa monomer. Native AOR is a homodimer. EPR spectroscopy of the purified enzyme that has been reduced with the substrate crotonaldehyde revealed a W(V) species with g(zyx) values of 1.952, 1.918, 1.872. The substrate-reduced AOR also contains a [4Fe-4S](1+) cluster with S=3/2 and zero field splitting parameters D=7.5 cm(-1) and E/D=0.22. Molybdenum was absent from the enzyme preparation. The P. aerophilum AOR lacks the amino acid sequence motif indicative for binding of mononuclear iron that is typically found in other AORs. Furthermore, the P. aerophilum AOR utilizes a 7Fe ferredoxin as the putative physiological redox partner, instead of a 4Fe ferredoxin as in Pyrococcus furiosus. This 7Fe ferredoxin has been purified from P. aerophilum, and the amino acid sequence has been identified using mass spectrometry. Direct electrochemistry of the ferredoxin showed two one-electron transitions, at -306 and -445 mV. In the presence of 55 microM ferredoxin the AOR activity is 17% of the activity obtained with 1 mM benzyl viologen as an electron acceptor.

Synthesis, characterization, and electrochemistry of cis-oxothio- and cis-bis(thio)tungsten(VI) complexes of hydrotris(3,5-dimethylpyrazol-1-yl)borate

The complexes TpWO2X react with sulfiding agents such as B2S3 or P4S10 to give the oxothio- and bis(thio)tungsten(VI) complexes TpWOSX (X = Cl(-)) and TpWS2X [X = Cl(-), S2PPh2(-); Tp = hydrotris(3,5-dimethylpyrazol-1-yl)borate]. The reaction of TpWS2Cl with (i) PPh3 in pyridine and (ii) dimethyl sulfoxide affords TpWOSCl in good overall yield. The chloro complexes undergo metathesis with alkali metal salts to yield species of the type TpWOSX and TpWS2X [X = OPh(-), SPh(-), SePh(-), (-)-mentholate]. The diamagnetic complexes exhibit NMR spectra indicative of C(1) (TpWOSX) or C(s) (TpWS2X) symmetry and IR spectra consistent with terminal oxo and thio ligation (nu(W=O), 940-925 cm(-1); nu(W=S) or nu(WS2), 495-475 cm(-1)). Crystals of (R,S)-TpWOS[(-)-mentholate] are monoclinic, space group P2(1), with a = 11.983(2) A, b = 18.100(3) A, c = 13.859(3) A, beta = 91.60(2) degrees, V = 3004.6(8) A(3), and Z = 4. Crystals of TpWS2(OPh)-CH2Cl2 are orthorhombic, space group Pbca, with a = 16.961(4) A, b = 33.098(7) A, c = 9.555(2) A, V = 5364(2) A(3), and Z = 8. The mononuclear, distorted-octahedral tungsten centers are coordinated by a tridentate Tp ligand, an alkoxy or aryloxy ligand, and two terminal chalcogenide ligands. The average W=O and W=S distances are 1.726(7) and 2.125(2) A, respectively, and the O=W=S and S=W=S angles 102.9(3) and 102.9(1) degrees, respectively. The tungsten and sulfur X-ray absorption spectra of TpWOSCl and TpWS2Cl are consistent with the presence of terminal pi-bonded thio ligands in both complexes. The thio complexes generally undergo a reversible one-electron reduction at potentials significantly more positive than their oxo analogues. The chemical, spectroscopic, and electrochemical properties of the complexes are heavily influenced by the presence of W=S pi frontier orbitals.