Food preservation by high pressure

Elucidation of high-pressure processing toward microbial inhibition, physicochemical properties, collagen fiber and muscle structure of blood clam edible portion

Impact of high-pressure processing (HP-P) on microbial inactivation, protein oxidation, collagen fiber, and muscle structure of the edible portion (EP) of blood clams (BC) was investigated. Aerobic plate count, Vibrio parahaemolyticus, V. vulnificus, other Vibrio spp. and Shewanella algae counts were not detectable when HP-P pressure of ≥300 MPa was applied. Carbonyl, disulphide bond content, and surface hydrophobicity upsurged as HP-P with augmenting pressure was employed. Protein with ∼53 kDa appeared when HP-P at 100 and 200 MPa was implemented. Increased pressure enhanced gap formation and abnormal muscle cell structure arrangements. HP-P also affected connective tissue, causing size reduction and disruption of the collagen filament fibers. However, firmness and toughness of BC-EP with HP-P ≤ 300 MPa were comparable to those of the control. HP-P at 300 MPa was therefore appropriate for treatment of BC with maintained textural properties, while less protein oxidation, collagen fiber and muscle structure disruption occurred.

Principles and Applications of Non-Thermal Technologies for Meat Decontamination

Meat contains high-value protein compounds that might degrade as a result of oxidation and microbial contamination. Additionally, various pathogenic and spoilage microorganisms can grow in meat. Moreover, contamination with pathogenic microorganisms above the infectious dose has caused foodborne illness outbreaks. To decrease the microbial population, traditional meat preservation methods such as thermal treatment and chemical disinfectants are used, but it may have limitations for the maintenance of meat quality or the consumers acceptance. Thus, non-thermal technologies (e.g., high-pressure processing, pulsed electric field, non-thermal plasma, pulsed light, supercritical carbon dioxide technology, ozone, irradiation, ultraviolet light, and ultrasound) have emerged to improve the shelf life and meat safety. Non-thermal technologies are becoming increasingly important because of their advantages in maintaining low temperature, meat nutrition, and short processing time. Especially, pulsed light and pulsed electric field treatment induce few sensory and physiological changes in high fat and protein meat products, making them suitable for the application. Many research results showed that these non-thermal technologies may keep meat fresh and maintain heat-sensitive elements in meat products.

Transformation of Seafood Side-Streams and Residuals into Valuable Products

Seafood processing creates enormous amounts of side-streams. This review deals with the use of seafood side-streams for transformation into valuable products and identifies suitable approaches for making use of it for different purposes. Starting at the stage of catching fish to its selling point, many of the fish parts, such as head, skin, tail, fillet cut-offs, and the viscera, are wasted. These parts are rich in proteins, enzymes, healthy fatty acids such as monounsaturated and polyunsaturated ones, gelatin, and collagen. The valuable biochemical composition makes it worth discussing paths through which seafood side-streams can be turned into valuable products. Drawbacks, as well as challenges of different aquacultures, demonstrate the importance of using the various side-streams to produce valuable compounds to improve economic performance efficiency and sustainability of aquaculture. In this review, conventional and novel utilization approaches, as well as a combination of both, have been identified, which will lead to the development of sustainable production chains and the emergence of new bio-based products in the future.

The potential of antifungal peptide Sesquin as natural food preservative

Sesquin is a wide spectrum antimicrobial peptide displaying a remarkable activity on fungi. Contrarily to most antimicrobial peptides, it presents an overall negative charge. In the present study, we elucidate the molecular basis of its mode of action towards biomimetic membranes by NMR and MD experiments. While a specific recognition of phosphatidylethanolamine (PE) might explain its activity in a variety of different organisms (including bacteria), a further interaction with ergosterol accounts for its strong antifungal activity. NMR data reveal a charge gradient along its amide protons allowing the peptide to reach the membrane phosphate groups despite its negative charge. Subsequently, the peptide gets structured inside the bilayer, reducing its order. MD simulations predict that its activity is retained in conditions commonly used for food preservation: low temperatures, high pressure, or the presence of electric field pulses, making Sesquin a good candidate as food preservative.

Impact of High-Pressure Processing (HPP) on Selected Quality and Nutritional Parameters of Cauliflower (Brassica oleracea var. Botrytis)

In recent years, innovative food processing methods, such as high-pressure processing (HPP) treatment, have been shown to improve food quality. The purpose of this work was to determine the effects of high-pressure processing (HPP; 400 and 600 MPa for 2 or 5 min, 20 °C) of cauliflower. Microbial shelf-life (total aerobic count and spores), texture, color, drip loss, dry matter, antioxidative capacity, total phenolic content, and ascorbic acid were analyzed before and after processing, as well as during storage (4 °C) for up to 42 days. Among the different treatments, HPP at 600 MPa exhibited low microbial counts between days 14 and 28 of storage, while at 400 MPa already had high bacterial counts between days 7 and 14. HPP at both 400 and 600 MPa was the best method to maintain the color during storage. The texture of the cauliflower did not differ from the control during storage for HPP. For all samples, the dry matter content remained stable during storage, with few differences between treatments. The nutritional quality of high-pressure-processed cauliflower at 600 MPa for 2 min remained high until day 28. The overall results of this study demonstrate that HPP has the potential to preserve the quality of cauliflower.

Biomolecules under Pressure: Phase Diagrams, Volume Changes, and High Pressure Spectroscopic Techniques

Pressure is an equally important thermodynamical parameter as temperature. However, its importance is often overlooked in the biophysical and biochemical investigations of biomolecules and biological systems. This review focuses on the application of high pressure (>100 MPa = 1 kbar) in biology. Studies of high pressure can give insight into the volumetric aspects of various biological systems; this information cannot be obtained otherwise. High-pressure treatment is a potentially useful alternative method to heat-treatment in food science. Elevated pressure (up to 120 MPa) is present in the deep sea, which is a considerable part of the biosphere. From a basic scientific point of view, the application of the gamut of modern spectroscopic techniques provides information about the conformational changes of biomolecules, fluctuations, and flexibility. This paper reviews first the thermodynamic aspects of pressure science, the important parameters affecting the volume of a molecule. The technical aspects of high pressure production are briefly mentioned, and the most common high-pressure-compatible spectroscopic techniques are also discussed. The last part of this paper deals with the main biomolecules, lipids, proteins, and nucleic acids: how they are affected by pressure and what information can be gained about them using pressure. I I also briefly mention a few supramolecular structures such as viruses and bacteria. Finally, a subjective view of the most promising directions of high pressure bioscience is outlined.

Non-thermal Processing Technologies for Dairy Products: Their Effect on Safety and Quality Characteristics

Thermal treatment has always been the processing method of choice for food treatment in order to make it safe for consumption and to extend its shelf life. Over the past years non-thermal processing technologies are gaining momentum and they have been utilized especially as technological advancements have made upscaling and continuous treatment possible. Additionally, non-thermal treatments are usually environmentally friendly and energy-efficient, hence sustainable. On the other hand, challenges exist; initial cost of some non-thermal processes is high, the microbial inactivation needs to be continuously assessed and verified, application to both to solid and liquid foods is not always available, some organoleptic characteristics might be affected. The combination of thermal and non-thermal processing methods that will produce safe foods with minimal effect on nutrients and quality characteristics, while improving the environmental/energy fingerprint might be more plausible.

Consumer Attitudes towards Food Preservation Methods

The development and scope of using various food preservation methods depends on the level of consumers’ acceptance. Despite their advantages, in the case of negative attitudes, producers may limit their use if it determines the level of sales. The aim of this study was to evaluate the perception of seven different food processing methods and to identify influencing factors, such as education as well as living area and, at the same time, to consider whether consumers verify this type of information on the labels. Additionally, the study included the possibility of influencing consumer attitudes by using alternative names for preservation methods, on the example of microwave treatment. The results showed that conventional heat treatments were the most preferred preservation methods, whereas preservatives, irradiation, radio waves and microwaves were the least favored, suggesting that consumers dislike methods connected with “waves” to a similar extent as their dislike for preservatives. The control factors proved to significantly modify the evaluation of the methods. The analysis of alternative names for microwave treatment showed that “dielectric heating” was significantly better perceived. These research findings are important as the basis for understanding consumer attitudes. Implications for business and directions of future research are also indicated.

Raw meat based diet (RMBD) for household pets as potential door opener to parasitic load of domestic and urban environment. Revival of understated zoonotic hazards? A review

RMBD (acronym of Raw Meat Based Diet) and BARF diets (acronym for Biologically Appropriate Raw Food or Bones and Raw Food) account dietary regimens based on raw ingredients (including raw meat), popular in pet feeding. Animal tissues and organs as well as other uncooked ingredients are more and more popularly used by pet owners to feed household pets. However, the increased risk of exposure to microbiological and parasitic agents poses the question as to whether such diets may be recommendable to be handled and offered to domestic cats and dogs co-living in domestic and urban environment. Above all, the threat of human and animal infections by parasites from raw meat fed to pets is not sufficiently explored and tracked, meanwhile deserving particular surveillance, instead. At this regard, raw meat feeding to pets may represent a route of exposure to the increased risk of environmental load. In fact, some parasites typically found in rural environment can be given the chance to complete their life-cycle, for the closeness between definitive and intermediate hosts. This is of particular concern, as potentially infected pets serving as definitive hosts can become a continuous source of environmental diffusion of parasites, both at domestic and urban level. The handling of raw meat requires adequate knowledge and awareness of the hygienic principles to prevent the onset of disorders related to both manipulation by pet owners and uncooked food consumption by the pet. This review aimed to shed a comprehensive overview of the hygienic aspects related to raw pet feeding, as to handling of raw meat in domestic environment, with special emphasis on parasitic agents and related zoonotic hazards.

Effects of Pressure Level and Time Treatment of High Hydrostatic Pressure (HHP) on Inulin Gelation and Properties of Obtained Hydrogels

The aim of this study was the evaluation of the influence of different HHP levels (150 and 300 MPa) and time treatment (5, 10, 20 min) on the gelation and properties of hydrogels with different inulin concentration (15, 20, 25 g/100 g). High-pressure treatment, in tested ranges, induces inulin gels and allows obtaining gel structures even at a lowest tested inulin content (i.e., 15 g/100 g). Selecting the pressure parameters, it is possible to modify the characteristics of the created hydrogels. The use of higher pressure (i.e., 300 MPa) allows to increase the stability of the hydrogels and change their structure to more compressed, which results in higher yield stress, lower spreadability, harder and more adhesive structure. For example, increasing the inulin gelling induction pressure (concentration 20 g/100 g) from 150 to 300 MPa with a time treatment of 10 min resulted in an increase in yield stress from 38.1 to 711.7 Pa, spreadability force from 0.59 to 4.59 N, firmness from 0.11 to 1.46 N, and adhesiveness from −0.06 to −0.65 N. Extending the time treatment of HHP increases this effect, but mainly when higher pressure and a higher concentration of inulin are being used. For example, extension of time treatment at 300 MPa pressure from 5 to 20 min resulted in an increase in yield stress from 774.8 to 1273.8 Pa, spreadability force from 6.28 to 8.43 N, firmness from 1.87 to 2.98 N, and adhesiveness from −0.94 to −1.27 N. The obtained results indicate the possibility of using HHP to create inulin hydrogels tailored to the characteristics in a specific food product.

Non-thermal emerging technologies as alternatives to chemical additives to improve the quality of wheat flour for breadmaking: a review

Wheat flour is the main ingredient used in the preparation of bread. Factors such as low gluten content and the addition of nontraditional ingredients in baking affect the quality of wheat flour and may limit its use in baking. With the increasing trend of "clean label" products, it may be interesting to develop and use physical processes to improve the quality of wheat flour and avoid the use of chemical additives. High hydrostatic pressure, non-thermal plasma, ultrasound, ozonation, ultraviolet light, and pulsed light treatments are non-thermal emerging technologies (NTETs) that have been studied for this purpose. They were originally developed to inactivate microorganisms and enzymes in foods. Additionally, these technologies can be used at low temperatures to modify the most important component of wheat flour, i.e., gluten and its fractions, which are responsible for the rheological properties of wheat flour dough. Thus, this review focuses on the effects of these NTETs by considering the following factors: (1) the technological properties of gluten, (2) gluten-starch interactions, (3) possible effects of NTETs on minor components of flours, and (4) the quality of wheat flour and the resulting final products.

Effect of High-Pressure Processing on Physico-Chemical, Microbiological and Sensory Traits in Fresh Fish Fillets (Salmo salar and Pleuronectes platessa)

High-pressure (HP) treatment could lead to several advantages when applied to fish and seafood since it would affect the extension of the shelf life of this highly perishable food. In this regard, this study aimed to evaluate the effect of high-pressure treatment (500 MPa for 2 min at a temperature of 4 °C) on changes in quality on two different kinds of fresh fish fillets (Salmo salar and Pleuronectes platessa). Specifically, physico-chemical (VOCs, untargeted metabolomics spectra, pH and color), microbiological (Enterobacteriaceae, Pseudomonas spp., mesophilic and psychrotrophic bacteria) and sensory traits were evaluated at different days of refrigerated storage. From the results obtained, it is possible to state that the high pressure significantly (p ≤ 0.05) reduced microbial growth for each investigated microorganism. Regarding the colorimetric coordinates, no remarkable effects on a* and b* indices were found, while a significant effect (p = 0.01) was observed on the colorimetric index L*, making the HP-treated samples lighter than their respective controls. The sensory analysis showed that for the odor attribute, the HP treatment seems to have had a stabilizing action during shelf-life. Moreover, the treated samples obtained a better score than the respective controls (p ≤ 0.05). With regards to texture and appearance attributes, the treatment seems to have had a significant (p ≤ 0.05) effect, making the treated samples more compact and opaque than controls, therefore resulting in the loss of the characteristics of raw fish for the treated samples. Moreover, from a chemical point of view, HP treatment prevents the development of volatile sulfides and delays the formation of histamine (p ≤ 0.05). Very interestingly, the metabolomic approach revealed novel dipeptide markers for the HP procedure.

Revisiting Non-Thermal Food Processing and Preservation Methods-Action Mechanisms, Pros and Cons: A Technological Update (2016-2021)

The push for non-thermal food processing methods has emerged due to the challenges associated with thermal food processing methods, for instance, high operational costs and alteration of food nutrient components. Non-thermal food processing involves methods where the food materials receive microbiological inactivation without or with little direct application of heat. Besides being well established in scientific literature, research into non-thermal food processing technologies are constantly on the rise as applied to a wide range of food products. Due to such remarkable progress by scientists and researchers, there is need for continuous synthesis of relevant scientific literature for the benefit of all actors in the agro-food value chain, most importantly the food processors, and to supplement existing information. This review, therefore, aimed to provide a technological update on some selected non-thermal food processing methods specifically focused on their operational mechanisms, their effectiveness in preserving various kinds of foods, as revealed by their pros (merits) and cons (demerits). Specifically, pulsed electric field, pulsed light, ultraviolet radiation, high-pressure processing, non-thermal (cold) plasma, ozone treatment, ionizing radiation, and ultrasound were considered. What defines these techniques, their ability to exhibit limited changes in the sensory attributes of food, retain the food nutrient contents, ensure food safety, extend shelf-life, and being eco-friendly were highlighted. Rationalizing the process mechanisms about these specific non-thermal technologies alongside consumer education can help raise awareness prior to any design considerations, improvement of cost-effectiveness, and scaling-up their capacity for industrial-level applications.

Aspects of high hydrostatic pressure food processing: Perspectives on technology and food safety

The last two decades saw a steady increase of high hydrostatic pressure (HHP) used for treatment of foods. Although the science of biomaterials exposed to high pressure started more than a century ago, there still seem to be a number of unanswered questions regarding safety of foods processed using HHP. This review gives an overview on historical development and fundamental aspects of HHP, as well as on potential risks associated with HHP food applications based on available literature. Beside the combination of pressure and temperature, as major factors impacting inactivation of vegetative bacterial cells, bacterial endospores, viruses, and parasites, factors, such as food matrix, water content, presence of dissolved substances, and pH value, also have significant influence on their inactivation by pressure. As a result, pressure treatment of foods should be considered for specific food groups and in accordance with their specific chemical and physical properties. The pressure necessary for inactivation of viruses is in many instances slightly lower than that for vegetative bacterial cells; however, data for food relevant human virus types are missing due to the lack of methods for determining their infectivity. Parasites can be inactivated by comparatively lower pressure than vegetative bacterial cells. The degrees to which chemical reactions progress under pressure treatments are different to those of conventional thermal processes, for example, HHP leads to lower amounts of acrylamide and furan. Additionally, the formation of new unknown or unexpected substances has not yet been observed. To date, no safety-relevant chemical changes have been described for foods treated by HHP. Based on existing sensitization to non-HHP-treated food, the allergenic potential of HHP-treated food is more likely to be equivalent to untreated food. Initial findings on changes in packaging materials under HHP have not yet been adequately supported by scientific data.

Analysis of temporal gene regulation of Listeria monocytogenes revealed distinct regulatory response modes after exposure to high pressure processing

BACKGROUND

The pathogen Listeria (L.) monocytogenes is known to survive heat, cold, high pressure, and other extreme conditions. Although the response of this pathogen to pH, osmotic, temperature, and oxidative stress has been studied extensively, its reaction to the stress produced by high pressure processing HPP (which is a preservation method in the food industry), and the activated gene regulatory network (GRN) in response to this stress is still largely unknown.

RESULTS

We used RNA sequencing transcriptome data of L. monocytogenes (ScottA) treated at 400 MPa and 8∘C, for 8 min and combined it with current information in the literature to create a transcriptional regulation database, depicting the relationship between transcription factors (TFs) and their target genes (TGs) in L. monocytogenes. We then applied network component analysis (NCA), a matrix decomposition method, to reconstruct the activities of the TFs over time. According to our findings, L. monocytogenes responded to the stress applied during HPP by three statistically different gene regulation modes: survival mode during the first 10 min post-treatment, repair mode during 1 h post-treatment, and re-growth mode beyond 6 h after HPP. We identified the TFs and their TGs that were responsible for each of the modes. We developed a plausible model that could explain the regulatory mechanism that L. monocytogenes activated through the well-studied CIRCE operon via the regulator HrcA during the survival mode.

CONCLUSIONS

Our findings suggest that the timely activation of TFs associated with an immediate stress response, followed by the expression of genes for repair purposes, and then re-growth and metabolism, could be a strategy of L. monocytogenes to survive and recover extreme HPP conditions. We believe that our results give a better understanding of L. monocytogenes behavior after exposure to high pressure that may lead to the design of a specific knock-out process to target the genes or mechanisms. The results can help the food industry select appropriate HPP conditions to prevent L. monocytogenes recovery during food storage.

Microbial inactivation by high pressure processing: principle, mechanism and factors responsible

High-pressure processing (HPP) is a novel technology for the production of minimally processed food products with better retention of the natural aroma, fresh-like taste, additive-free, stable, convenient to use. In this regard safety of products by microbial inactivation is likely to become an important focus for food technologists from the research and industrial field. High pressure induces conformational changes in the cell membranes, cell morphology. It perturbs biochemical reactions, as well as the genetic mechanism of the microorganisms, thus ensures the reduction in the microbial count. Keeping in view the commercial demand of HPP products, the scientific literature available on the mechanism of inactivation by high pressure and intrinsic and extrinsic factors affecting the efficiency of HPP are systematically and critically analyzed in this review to develop a clear understanding of these issues. Modeling applied to study the microbial inactivation kinetics by HPP is also discussed for the benefit of interested readers.

Macroalgae-Fortified Sausages: Nutritional and Quality Aspects Influenced by Non-Thermal High-Pressure Processing

The present work evaluated the nutritional impact of macroalgae flours used as new ingredients in fermented sausages and the feasibility of using high-pressure processing (HPP) as a non-thermal pasteurization methodology to keep the quality attributes of the new food products. A commercial macroalgae mix was used in the formulation of new macroalgae-fortified meat frankfurter sausages (F-MFS), macroalgae-fortified vegetable frankfurter sausages (F-VFS) and in macroalgae-fortified traditional Portuguese sausage "chouriço" (F-TPS), overall incrementing the contents of Mg, K, Ca, Mn and Fe and decreasing the Na/K ratio. The application of HPP allowed extending the shelf-life of frankfurters by about 3-fold and improved the safety of "chouriço" along 180 days of storage, keeping its microbial load below the detection limit. The prevention of microbial growth in F-MFS and F-VFS was accompanied by pH stability of the products. In addition, no significant detriment on surface color and fatty acids was observed between pressurized and non-pressurized sausages, allowing consolidating the suitability of HPP in seaweed-fortified fermented sausages.

Supercritical carbon dioxide pasteurization to reduce the activity of muscle protease and its impact on physicochemical properties of Nile tilapia

The studies of the effect of supercritical carbon dioxide (scCO2) pasteurization on solid food from fish origin are scarcely available. This study was intended to address that gap by investigating the effect of scCO2 on the reduction of muscle protease activity and its impact on physicochemical properties of the Nile tilapia. Tilapia were exposed to CO2 pressure at 70, 75, 80, 85, and 90 bar; temperature at 40 °C; and holding time for 15 min. This study discovered that 80 bar was the minimum pressure to achieve half residual activity of muscle protease and two logs reductions of microbial counts. The applications of 80 and 85 bar were found to achieve significant reduction of tilapia muscle protease activity while still maintained acceptable textural properties. Both 80 and 85 bar were found to be effective to inhibit softening development of tilapia fillet during 14 days of chilled storage. Eighty-five bar and 15 min CO2 pasteurization was considered as maximum level of CO2 pressure that tilapia could withstand without degrading its texture significantly.

High-pressure processing of usually discarded dry aged beef trimmings for subsequent processing

In this study, we investigated if the usually discarded trimmings from dry aged beef can be incorporated into raw fermented sausages as a substitute for fresh beef without altering any major characteristics. Dry aged trimmings were subjected to high-pressure processing (600 MPa, 3 min hold) to reduce the bacterial load, achieving a 3-log reduction. HPP-treated dry aged beef trimmings were then incorporated into raw fermented sausages (60% pork and 40% beef). Beef was substituted with trimmings in different concentrations (7.5, 12.5, 25, 50, 100%). Due to the substitution, the water content of the sausages was reduced depending on the amount of beef substituted. Consequently, the sausages with substituted beef, for example, 50 and 100%, achieved the same water content after 5.4 and 3.7 days, respectively, than control sausage at day 9. However, the substitution (100%) affected the fat content, which contributes to significant differences (p < .05) in firmness during ripening.

Effect of high pressure processing on the microstructure, myofibrillar protein oxidation, and volatile compounds of sauce lamb tripe

In this study, sauce lamb tripe was used as the research object. High pressure processing (HPP) was carried out at 100, 250, and 400 MPa, with holding times of 5, 10, 15, 20, and 25 min at 25 °C, respectively. The effects of HPP on the microstructure and volatile compound content of sauce lamb tripe and the properties of myofibrillar protein were studied. The degree of protein oxidation was most significant at 400 MPa for 25 min. The secondary structure of myofibrillar protein became unstable and the microstructure of the sauce lamb tripe became loose at 400 MPa. The retention of hydrocarbons, aldehydes, alcohols, and ketones was maximum at 250 MPa for 15 min, and the flavor-contributing compound (3-Hydroxy-2-butanone) was also retained by 11.9% on ketones at 250 MPa for 15 min. The results showed that myofibrillar protein was appropriately oxidized; the sauce lamb tripe had better microstructure and several representative volatile compounds after HPP. Therefore, better processing conditions for sauce lamb tripe were 250 MPa for 15 min.

Effects of high-pressure processing on fungi spores: Factors affecting spore germination and inactivation and impact on ultrastructure

Food contamination with heat-resistant fungi (HRF), and their spores, is a major issue among fruit processors, being frequently found in fruit juices and concentrates, among other products, leading to considerable economic losses and food safety issues. Several strategies were developed to minimize the contamination with HRF, with improvements from harvesting to the final product, including sanitizers and new processing techniques. Considering consumers' demands for minimally processed, fresh-like food products, nonthermal food-processing technologies, such as high-pressure processing (HPP), among others, are emerging as alternatives to the conventional thermal processing techniques. As no heat is applied to foods, vitamins, proteins, aromas, and taste are better kept when compared to thermal processes. Nevertheless, HPP is only able to destroy pathogenic and spoilage vegetative microorganisms to levels of pertinence for food safety, while bacterial spores remain. Regarding HRF spores (both ascospores and conidiospores), these seem to be more pressure-sensible than bacterial spores, despite a few cases, such as the ascospores of Byssochlamys spp., Neosartorya spp., and Talaromyces spp. that are resistant to high pressures and high temperatures, requiring the combination of both variables to be inactivated. This review aims to cover the literature available concerning the effects of HPP at room-like temperatures, and its combination with high temperatures, and high-pressure cycling, to inactivate fungi spores, including the main factors affecting spores' resistance to high-pressure, such as pH, water activity, nutritional composition of the food matrix and ascospore age, as well as the changes in the spore ultrastructure, and the parameters to consider regarding their inactivation by HPP.

Effect of High-Pressure Processing (HPP) on the Fatty Acid Profile of Different Sized Ragworms (Hediste diversicolor) Cultured in an Integrated Multi-Trophic Aquaculture (IMTA) System

Ragworms (Hediste diversicolor) cultured under integrated multi-trophic aquaculture (IMTA) conditions display an improved fatty acids (FA) profile than conspecifics from the wild, thus being more suitable for maturation diets of marine fish and shrimp. Nonetheless, their use may represent a potential pathway for pathogens. The objective of the present study was to determine if high-pressure processing (HPP), as an approach to safeguard microbiological safety, could promote significant shifts on the FA profiles of different sized ragworms. An analysis of similarities (ANOSIM) revealed the existence of significant differences in the FA profile and lipid quality indexes (atherogenicity (AI), thrombogenicity (TI) and polyene (PI)) of control and HPP treated ragworms of all tested sizes (small, medium and large). Saturated (SFA) and monounsaturated FA (MUFA) increased after HPP, while polyunsaturated FA (PUFA; FA with 2 or 3 double bonds) and highly unsaturated FA (HUFA; FA with ≥ 4 double bonds) decreased. The amount of docosahexaenoic acid (DHA) in polychaetes exposed to HPP decreased an average of 25%, when compared with the levels recorded in control groups. The values of PI significantly decreased after HPP, while those of AI and TI displayed a significant increase. Despite the shifts in the FA profile of ragworms exposed to HPP, these still display a superior profile to that of wild specimens, namely the presence of DHA. Therefore, HPP can be considered as a suitable approach to safeguard the biosecurity of cultured polychaetes, without compromising their nutritional value, and support the principles of circular economy through the use of IMTA.

Potentialities and Limits of Some Non-thermal Technologies to Improve Sustainability of Food Processing

In the whole food production chain, from the farm to the fork, food manufacturing steps have a large environmental impact. Despite significant efforts made to optimize heat recovery or water consumption, conventional food processing remains poorly efficient in terms of energy requirements and waste management. Therefore, in the few last decades, much research has focused on the development of alternative non-thermal technologies. Some of them, such as membrane separation processes, hydrostatic or dynamic high pressure, dense phase or high-pressure carbon dioxide, and pulsed electric fields (PEFs) have been extensively studied for cold pasteurization, concentration, extraction, or food functionalization. However, it is still difficult to evaluate the actual advantages or limits of these innovative processing technologies to replace conventional processes. Thus, the overall aim of this paper is to present an overview of the most relevant studies dealing with the potentialities and limits of these non-thermal technologies to improve sustainability of food processing. After a brief presentation of the physical principles of these technologies, the paper illustrates how these technologies could play a decisive role for sustainable food preservation or valorization of raw materials and by-products.

Synergism between high hydrostatic pressure and glutaraldehyde for the inactivation of Staphylococcus aureus at moderate temperature

The sterilization of transplant and medical devices should be effective but not detrimental to the structural properties of the materials used. In this study, we examined the effectiveness of chemical and physical agents for inactivating Staphylococcus aureus, a gram-positive bacterium and important cause of infections and biofilm production. The treatment conditions in this work were chosen to facilitate their subsequent use with sensitive materials. The effects of temperature, high hydrostatic pressure, and glutaraldehyde disinfectant on the growth of two strains of S. aureus (ATCC 25923 and BEC 9393) were investigated individually and/or in combinations. A low concentration of glutaraldehyde (0.5 mM), high hydrostatic pressure (300 MPa for 10 min), and moderate temperature (50 °C), when used in combination, significantly potentiated the inactivation of both bacterial strains by > 8 orders of magnitude. Transmission electron microscopy revealed structural damage and changes in area that correlated with the use of pressure in the presence of glutaraldehyde at room temperature in both strains. Biofilm from strain ATCC 25923 was particularly susceptible to inactivation. The conditions used here provided effective sterilization that can be applied to sensitive surgical devices and biomaterials, with negligible damage. The use of this experimental approach to investigate other pathogens could lead to the adoption of this procedure for sterilizing sensitive materials.

Recent Advances in Physical Post-Harvest Treatments for Shelf-Life Extension of Cereal Crops

As a result of the rapidly growing global population and limited agricultural area, sufficient supply of cereals for food and animal feed has become increasingly challenging. Consequently, it is essential to reduce pre- and post-harvest crop losses. Extensive research, featuring several physical treatments, has been conducted to improve cereal post-harvest preservation, leading to increased food safety and sustainability. Various pests can lead to post-harvest losses and grain quality deterioration. Microbial spoilage due to filamentous fungi and bacteria is one of the main reasons for post-harvest crop losses and mycotoxins can induce additional consumer health hazards. In particular, physical treatments have gained popularity making chemical additives unnecessary. Therefore, this review focuses on recent advances in physical treatments with potential applications for microbial post-harvest decontamination of cereals. The treatments discussed in this article were evaluated for their ability to inhibit spoilage microorganisms and degrade mycotoxins without compromising the grain quality. All treatments evaluated in this review have the potential to inhibit grain spoilage microorganisms. However, each method has some drawbacks, making industrial application difficult. Even under optimal processing conditions, it is unlikely that cereals can be decontaminated of all naturally occurring spoilage organisms with a single treatment. Therefore, future research should aim for the development of a combination of treatments to harness their synergistic properties and avoid grain quality deterioration. For the degradation of mycotoxins the same conclusion can be drawn. In addition, future research must investigate the fate of degraded toxins, to assess the toxicity of their respective degradation products.

Tracking the behavior of Maillard browning in lysine/arginine-sugar model systems under high hydrostatic pressure

BACKGROUND

High-pressure processing is gaining popularity in the food industry. However, its effect on the Maillard reaction during high-pressure-assisted pasteurization and sterilization is not well documented. This study aimed to investigate the effects of high hydrostatic pressure on the Maillard reaction during these processes using amino acid (lysine or arginine)-sugar (glucose or fructose) solution models.

RESULTS

High pressure retarded the intermediate and final stages of the Maillard reaction in the lysine-sugar model. For the lysine-glucose model, the degradation rate of Amadori compounds was decelerated, while acceleration was observed in the arginine-sugar model. Increased temperature not only accelerated the Maillard reaction over time but also formed fluorescent compounds with different emission wavelengths. Lysine reacted with the sugars more readily than arginine under the same conditions. In addition, it was easier for lysine to react with glucose, whereas arginine reacted more readily with fructose under high pressure.

CONCLUSION

High pressure exerts different effects on lysine-sugar and arginine-sugar models. © 2017 Society of Chemical Industry.

High pressure processing and thermal pasteurization of strawberry purée: quality parameters and shelf life evaluation during cold storage

This study was aimed at monitoring changes in the quality of strawberry purée preserved by high pressure processing (HPP) and thermal pasteurization (TP) during cold storage (6 °C) and determining its optimal storage period. The storage period of strawberry purée treated at 500 MPa, 50 °C, 15 min based on microbiological changes was 12 weeks. During this period, purée lost 32% of polyphenols, 73% of anthocyanins and entire vitamin C. Color changes described as dE increased up to 5.05 whereas the overall sensory quality decreased by 3 points on a 9-point scale. Under similar storage conditions, TP-preserved purée lost only 28% of polyphenols and 54% of anthocyanins, and entire vitamin C. Color changes were more visible (dE = 7.21) compared to the HPP sample whereas the overall sensory quality decreased only by 2 points. Recommended cold shelf-life for the HPP product was estimated at 6 weeks, during which period HPP-preserved purée had higher content of polyphenols and colour parameters compared to TP purée.

High pressure as an alternative processing step for ham production

As high pressure processing (HPP) is becoming more and more important in the food industry, this study examined the application of HPP (500 and 600MPa) as a manufacturing step during simulated ham production. By replacing conventional heating with HPP steps, ham-like texture or color attributes could not be achieved. HPP products showed a less pale, less red appearance, softer texture and higher yields. However, a combination of mild temperature (53°C) and 500MPa resulted in parameters more comparable to cooked ham. We conclude that HPP can be used for novel food development, providing novel textures and colors. However, when it comes to ham production, a heating step seems to be unavoidable to obtain characteristic ham properties.

Acidic Electrolyzed Water as a Novel Transmitting Medium for High Hydrostatic Pressure Reduction of Bacterial Loads on Shelled Fresh Shrimp

Acidic electrolyzed water (AEW), a novel non-thermal sterilization technology, is widely used in the food industry. In this study, we firstly investigated the effect of AEW as a new pressure transmitting medium for high hydrostatic pressure (AEW-HHP) processing on microorganisms inactivation on shelled fresh shrimp. The optimal conditions of AEW-HHP for Vibrio parahaemolyticus inactivation on sterile shelled fresh shrimp were obtained using response surface methodology: NaCl concentration to electrolysis 1.5 g/L, treatment pressure 400 MPa, treatment time 10 min. Under the optimal conditions mentioned above, AEW dramatically enhanced the efficiency of HHP for inactivating V. parahaemolyticus and Listeria monocytogenes on artificially contaminated shelled fresh shrimp, and the log reductions were up to 6.08 and 5.71 log10 CFU/g respectively, while the common HHP could only inactivate the two pathogens up to 4.74 and 4.31 log10 CFU/g respectively. Meanwhile, scanning electron microscopy (SEM) showed the same phenomenon. For the naturally contaminated shelled fresh shrimp, AEW-HHP could also significantly reduce the micro flora when examined using plate count and PCR-DGGE. There were also no significant changes, histologically, in the muscle tissues of shrimps undergoing the AEW-HHP treatment. In summary, using AEW as a new transmitting medium for HHP processing is an innovative non thermal technology for improving the food safety of shrimp and other aquatic products.