1
|
Winiarska N, Stachura A, Roszkowski B, Pietruski P, Włodarski P, Paskal W. Anthropometry and Current Aesthetic Concept of the Lower Third of the Face and Lips in Caucasian Adult Population: A Systematic Review and Meta-Analysis. Aesthetic Plast Surg 2024; 48:2353-2364. [PMID: 38467850 DOI: 10.1007/s00266-024-03930-5] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/14/2023] [Accepted: 02/09/2024] [Indexed: 03/13/2024]
Abstract
BACKGROUND The lack of standardization of the norms and aesthetic concept of the lower third of the face and lips creates challenges in reconstructive surgery and aesthetic procedures. A large-scale, anthropometric measurements summary poses an alternative for establishing universal patterns. METHODS A systematic review was conducted by searching PubMed, Embase, Google Scholar and Web of Science using keywords: lip, face, aesthetics, beauty, anthropometry and Caucasian. Seventy records were included in the review and checked in detail in terms of available data. RESULTS The study contains a meta-analysis of twelve parameters with sufficient quantitative data-lip width, nose width, facial width, lower third of the face height, midline mandible height, total height of the upper and lower lip, upper and lower vermilion height, cutaneous upper lip height and nasolabial and mentolabial angle. CONCLUSIONS The review provides a detailed database of primary anthropometric studies of lips and perioral regions of the healthy Caucasian population. The attractiveness of the region is focused on uniformity of proportions. Notably, results acquired with different methods of measurement are not interchangeable. Despite many published anthropometric studies, systems for conducting the measurements and reporting the results are not sufficiently unified to quantitatively assess meticulous key aesthetic clinical parameters. LEVEL OF EVIDENCE I This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine Ratings, please refer to Table of Contents or online Instructions to Authors www.springer.com/00266 .
Collapse
Affiliation(s)
- Natalia Winiarska
- Department of Methodology, Medical University of Warsaw, Banacha 1B St, 02-091, Warsaw, Poland
| | - Albert Stachura
- Department of Methodology, Medical University of Warsaw, Banacha 1B St, 02-091, Warsaw, Poland
- Doctoral School, Medical University of Warsaw, 02-091, Warsaw, Poland
| | - Bartłomiej Roszkowski
- Department of Methodology, Medical University of Warsaw, Banacha 1B St, 02-091, Warsaw, Poland
| | - Piotr Pietruski
- Private Practice, Warsaw, Poland
- Department of Plastic Surgery, Center of Oncology of the Lublin Region St. Jana z Dukli, Lublin, Poland
| | - Paweł Włodarski
- Department of Methodology, Medical University of Warsaw, Banacha 1B St, 02-091, Warsaw, Poland
| | - Wiktor Paskal
- Department of Methodology, Medical University of Warsaw, Banacha 1B St, 02-091, Warsaw, Poland.
| |
Collapse
|
2
|
Yao K, Xie Y, Xia L, Wei S, Yu W, Shen G. The Reliability of Three-Dimensional Landmark-Based Craniomaxillofacial and Airway Cephalometric Analysis. Diagnostics (Basel) 2023; 13:2360. [PMID: 37510103 PMCID: PMC10377994 DOI: 10.3390/diagnostics13142360] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/27/2023] [Revised: 06/25/2023] [Accepted: 07/10/2023] [Indexed: 07/30/2023] Open
Abstract
Cephalometric analysis is a standard diagnostic tool in orthodontics and craniofacial surgery. Today, as conventional 2D cephalometry is limited and susceptible to analysis bias, a more reliable and user-friendly three-dimensional system that includes hard tissue, soft tissue, and airways is demanded in clinical practice. We launched our study to develop such a system based on CT data and landmarks. This study aims to determine whether the data labeled through our process is highly qualified and whether the soft tissue and airway data derived from CT scans are reliable. We enrolled 15 patients (seven males, eight females, 26.47 ± 3.44 years old) diagnosed with either non-syndromic dento-maxillofacial deformities or OSDB in this study to evaluate the intra- and inter-examiner reliability of our system. A total of 126 landmarks were adopted and divided into five sets by region: 28 cranial points, 25 mandibular points, 20 teeth points, 48 soft tissue points, and 6 airway points. All the landmarks were labeled by two experienced clinical practitioners, either of whom had labeled all the data twice at least one month apart. Furthermore, 78 parameters of three sets were calculated in this study: 42 skeletal parameters (23 angular and 19 linear), 27 soft tissue parameters (9 angular and 18 linear), and 9 upper airway parameters (2 linear, 4 areal, and 3 voluminal). Intraclass correlation coefficient (ICC) was used to evaluate the inter-examiner and intra-examiner reliability of landmark coordinate values and measurement parameters. The overwhelming majority of the landmarks showed excellent intra- and inter-examiner reliability. For skeletal parameters, angular parameters indicated better reliability, while linear parameters performed better for soft tissue parameters. The intra- and inter-examiner ICCs of airway parameters referred to excellent reliability. In summary, the data labeled through our process are qualified, and the soft tissue and airway data derived from CT scans are reliable. Landmarks that are not commonly used in clinical practice may require additional attention while labeling as they are prone to poor reliability. Measurement parameters with values close to 0 tend to have low reliability. We believe this three-dimensional cephalometric system would reach clinical application.
Collapse
Affiliation(s)
- Kan Yao
- Department of Oral and Cranio-Maxillofacial Surgery, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai 200011, China
- College of Stomatology, Shanghai Jiao Tong University, Shanghai 200011, China
- National Center for Stomatology, National Clinical Research Center for Oral Diseases, Shanghai Key Laboratory of Stomatology, Shanghai Research Institute of Stomatology, Shanghai 200011, China
| | - Yilun Xie
- Department of Stomatology, Ren Ji Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai 200127, China
| | - Liang Xia
- Department of Oral and Cranio-Maxillofacial Surgery, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai 200011, China
- College of Stomatology, Shanghai Jiao Tong University, Shanghai 200011, China
- National Center for Stomatology, National Clinical Research Center for Oral Diseases, Shanghai Key Laboratory of Stomatology, Shanghai Research Institute of Stomatology, Shanghai 200011, China
| | - Silong Wei
- Department of Oral and Cranio-Maxillofacial Surgery, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai 200011, China
- College of Stomatology, Shanghai Jiao Tong University, Shanghai 200011, China
- National Center for Stomatology, National Clinical Research Center for Oral Diseases, Shanghai Key Laboratory of Stomatology, Shanghai Research Institute of Stomatology, Shanghai 200011, China
| | - Wenwen Yu
- Department of Oral and Cranio-Maxillofacial Surgery, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai 200011, China
- College of Stomatology, Shanghai Jiao Tong University, Shanghai 200011, China
- National Center for Stomatology, National Clinical Research Center for Oral Diseases, Shanghai Key Laboratory of Stomatology, Shanghai Research Institute of Stomatology, Shanghai 200011, China
| | - Guofang Shen
- Department of Oral and Cranio-Maxillofacial Surgery, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai 200011, China
- College of Stomatology, Shanghai Jiao Tong University, Shanghai 200011, China
- National Center for Stomatology, National Clinical Research Center for Oral Diseases, Shanghai Key Laboratory of Stomatology, Shanghai Research Institute of Stomatology, Shanghai 200011, China
| |
Collapse
|
3
|
Farronato M, Baselli G, Baldini B, Favia G, Tartaglia GM. 3D Cephalometric Normality Range: Auto Contractive Maps (ACM) Analysis in Selected Caucasian Skeletal Class I Age Groups. Bioengineering (Basel) 2022; 9:bioengineering9050216. [PMID: 35621494 PMCID: PMC9137702 DOI: 10.3390/bioengineering9050216] [Citation(s) in RCA: 15] [Impact Index Per Article: 7.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/31/2022] [Revised: 05/04/2022] [Accepted: 05/12/2022] [Indexed: 11/16/2022] Open
Abstract
The objective of this paper is to define normal values of a novel 3D cephalometric analysis and to define the links through an artificial neural network (ANN). Methods: One hundred and fifteen CBCTs of Class I young patients, distributed among gender-adjusted developmental groups, were selected. Three operators identified 18 cephalometric landmarks from which 36 measurements were obtained. The repeatability was assessed through the ICC. Two-dimensional values were extracted by an automatic function, and the mean value and standard deviation were compared by paired Student’s t-tests. Correlation coefficient gave the relationships between 2D and 3D measurements for each group. The values were computed with the ANN to evaluate the parameters normality link and displayed by Pajek software. Results: The ICC assessed an excellent (≥0.9) repeatability. Normal values were extracted, and compared with 2D measurements, they showed a high correlation on the mid-sagittal plane, reaching 1.00, with the lowest 0.71 on the lateral plane. The ANN showed strong links between the values with the centrality of the go-sagittal plane compared to the rest. Conclusions: The study provides a set of 3D cephalometric values obtained by the upper and lower 95% CI for the mean divided into the developmental stage subgroups. The two-dimensional measurements showed variable concordance, while the ANN showed a centrality between the parameters.
Collapse
Affiliation(s)
- Marco Farronato
- Department of Orthodontics, Faculty of Medicine, University of Milan, 20100 Milan, Italy; (B.B.); (G.M.T.)
- Correspondence:
| | - Giuseppe Baselli
- Department of Electronics, Information and Bioengineering, Politecnico Di Milano, 20133 Milan, Italy;
| | - Benedetta Baldini
- Department of Orthodontics, Faculty of Medicine, University of Milan, 20100 Milan, Italy; (B.B.); (G.M.T.)
| | - Gianfranco Favia
- Department of Interdisciplinary Medicine, Odontostomatology Unit, University of Bari “Aldo Moro”, 70121 Bari, Italy;
| | - Gianluca Martino Tartaglia
- Department of Orthodontics, Faculty of Medicine, University of Milan, 20100 Milan, Italy; (B.B.); (G.M.T.)
- Facial Surgery and Dentistry Fondazione IRCCS Cà Granda, UOC Maxillo, Ospedale Maggiore Policlinico, 20142 Milan, Italy
| |
Collapse
|
4
|
Badr AM, Refai WMM, El-Shal MG, Abdelhameed AN. Accuracy and Reliability of Kinect Motion Sensing Input Device’s 3D Models: A Comparison to Direct Anthropometry and 2D Photogrammetry. Open Access Maced J Med Sci 2021. [DOI: 10.3889/oamjms.2021.6006] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/05/2022] Open
Abstract
AIM: This study aims to evaluate the accuracy and reliability of Kinect motion sensing input device’s three-dimensional (3D) models by comparing it with direct anthropometry and digital 2D photogrammetry.
MATERIALS AND METHODS: Six profiles and four frontal parameters were directly measured on the faces of 80 participants. The same measurements were repeated using two-dimensional (2D) photogrammetry and (3D) images obtained from Kinect device. Another observer made the same measurements for 30% of the images obtained with 3D technique, and interobserver reproducibility was evaluated for 3D images. Intraobserver reproducibility was evaluated. Statistical analysis was conducted using the paired samples t-test, interclass correlation coefficient, and Bland-Altman limits of agreement.
RESULTS: The highest mean difference was 0.0084 mm between direct measurement and photogrammetry, 0.027 mm between direct measurement and 3D Kinect’s models, and 0.018 mm between photogrammetry and 3D Kinect’s. The lowest agreement value was 0.016 in the all parameter between the photogrammetry and 3D Kinect’s methods. Agreement between the two observers varied from 0.999 Sn-Me to 1 with the rest of linear measurements.
CONCLUSION: Measurements done using 3D Images obtained from Kinect device indicate that it may be an accurate and reliable imaging method for use in orthodontics. It also provides an easy low-cost 3D imaging technique that has become increasingly popular in clinical settings, offering advantages for surgical planning and outcome evaluation.
Collapse
|
5
|
Bravo-Hammett S, Nucci L, Christou T, Aristizabal JF, Kau CH. 3D Analysis of Facial Morphology of a Colombian Population Compared to Adult Caucasians. Eur J Dent 2020; 14:342-351. [PMID: 32447750 PMCID: PMC7440945 DOI: 10.1055/s-0040-1712071] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/04/2022] Open
Abstract
Objective:
The purpose of this study involves describing the facial morphology of a Colombian population with three-dimensional (3D) imaging, and comparing their facial morphology with the Caucasian to create a database for this ethnicity.
Materials and Methods:
The study, which included 135 subjects selected from the Valle University in Cali, Colombia, and 535 Caucasian subjects selected from the FaceBase–Data (1U01DE024449–01), was funded by the National Institute of Dental and Craniofacial Research. All images were taken in the natural head position (NHP) and captured using a stereo-photogrammetric camera system (3dMDface) to obtain a 3D image of each patient. The subjects were between 19 to 31 years of age, with a normal body mass index (BMI), and no craniofacial deformities. All images were plotted and analyzed using the 3dMDVultus software to calculate linear and angular measurements. Standard deviation (SD) and means were calculated for each measurement and analyzed using
t
-test for different samples.
Results:
The Hispanic population had wider eyes, more protruded upper and lower lips, wider face, and greater mandibular width. Caucasian females had a more acute full profile, larger middle third, and less protrusive lips. Understanding the facial morphology of different populations would help to establish a better diagnosis and treatment planning for each ethnicity.
Conclusions:
From this study, the following conclusions may be drawn:
1. The mean values of Colombian males showed greater measurements than females in the majority of measurements. 2. Caucasian females had a more acute full profile, larger middle and lower third, and less protrusive lips. 3. This study showed significant ethnic differences in the linear and angular measurements, showing us the importance of considering these findings in the diagnosis and treatment planning when a Hispanic population is involved. Soft tissue values should reflect the norms according to each ethnic population in order to achieve treatment goals.
Collapse
Affiliation(s)
| | - Ludovica Nucci
- Department of Orthodontics, University of Alabama Birmingham, United States
| | - Teti Christou
- Department of Orthodontics, University of Alabama Birmingham, United States
| | | | - Chung How Kau
- Department of Orthodontics, University of Alabama Birmingham, United States
| |
Collapse
|
6
|
Krneta Đokić B, Zhurov A, Richmond S, Verdenik I, Ovsenik M. 3D soft‐tissue evaluation of a Class III treatment with rapid maxillary expander and face mask in pre‐pubertal phase—A retrospective cohort study. Orthod Craniofac Res 2020; 23:323-331. [DOI: 10.1111/ocr.12373] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/06/2019] [Revised: 02/28/2020] [Accepted: 03/02/2020] [Indexed: 12/26/2022]
Affiliation(s)
- Bojana Krneta Đokić
- Department of Orthodontics and Dentofacial Orthopedics Faculty of Medicine University of Ljubljana Ljubljana Slovenia
| | - Alexei Zhurov
- Department of Applied Clinical Research and Public Health School of Dentistry Cardiff UK
| | - Stephen Richmond
- Department of Applied Clinical Research and Public Health School of Dentistry Cardiff UK
| | - Ivan Verdenik
- Department of Obstetrics and Gynecology University Medical Centre Ljubljana Ljubljana Slovenia
| | - Maja Ovsenik
- Department of Orthodontics and Dentofacial Orthopedics Faculty of Medicine University of Ljubljana Ljubljana Slovenia
| |
Collapse
|
7
|
Castillo JC, Gianneschi G, Azer D, Manosudprasit A, Haghi A, Bansal N, Allareddy V, Masoud MI. The relationship between 3D dentofacial photogrammetry measurements and traditional cephalometric measurements. Angle Orthod 2019; 89:275-283. [PMID: 30779676 DOI: 10.2319/120317-825.1] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022] Open
Abstract
OBJECTIVES To determine the relationship between traditional cephalometric measurements and corresponding nonradiographic three-dimensional (3D) photogrammetry measurements. MATERIALS AND METHODS This was a cross-sectional study of 20 orthodontic patients (10 male and 10 female) who received lateral cephalometric radiographs and 3D dentofacial photogrammetric records with each subject serving as his or her own control for a total sample size of 40 images (20 per method). A 3D analysis that resembled a traditional cephalometric analysis was established using the eyes and natural head orientation as substitutes for the cranial base. Pearson correlation coefficients and multivariable linear regression plots were calculated to evaluate the relationship between the photogrammetry measurements and the cephalometric measurements. RESULTS The ANB angle, mandibular plane angle, lower anterior face height, upper incisor angle to SN, upper incisor angle to NA, and all measurements of lower incisor position and inclination had strong positive Pearson correlation coefficients with the corresponding 3D photogrammetry measurements ( P < .004). Statistically significant regression plots demonstrated that cephalometric relationships between the jaws and incisor orientation can be predicted from corresponding 3D photogrammetry measurements. CONCLUSIONS 3D photogrammetry measurements relating the jaws to each other and incisor orientation has a strong positive correlation with corresponding traditional cephalometric measurements and can serve as cephalometric predictors. Capturing the eyes using 3D photogrammetry can obviate the need to expose the cranial base and allow limiting the radiographic field to the area of interest.
Collapse
|
8
|
Badiali G, Marcelli E, Bortolani B, Marchetti C, Cercenelli L. An average three-dimensional virtual human skull for a template-assisted maxillofacial surgery. Int J Artif Organs 2019; 42:566-574. [PMID: 31117867 DOI: 10.1177/0391398819849075] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
INTRODUCTION Although many advances have been made in three-dimensional virtual planning in maxillofacial surgery, facial harmony is still difficult to achieve and is heavily dependent on the surgeon's experience. The aim of the study is to present a method to build up an average three-dimensional virtual human skull to be used as a reference template for bone repositioning and reconstruction during maxillofacial surgical interventions. METHODS A total of 20 patients (10 females and 10 males) were selected for the optimal outcome after orthognathic surgery. Postoperative cone-beam computed tomography scans were collected and processed in order to obtain three-dimensional digital models of each skull. For male and female subgroups, the three-dimensional skull models were registered and an average three-dimensional virtual skull model was computed. Deviation color maps were calculated to show differences between each postoperative skull model in the population and the obtained average three-dimensional skull. A clinical use case of genioplasty treatment assisted by the provided average three-dimensional skull template was presented. RESULTS The overall mean deviation from the average three-dimensional skull model was 1.3 ± 0.6 and 1.6 ± 0.5 mm in male and female subgroups, respectively. For both groups, the greatest deviations were at the area of the mandible, while almost no deviation was found at the zygomatic and orbital areas. In the presented use case, the female average three-dimensional skull model was effectively used for guiding surgical planning. CONCLUSION The presented method of obtaining an average three-dimensional virtual human skull may offer the interesting perspective of performing an innovative template-assisted maxillofacial surgery.
Collapse
Affiliation(s)
- Giovanni Badiali
- Maxillofacial Surgery Unit, Department of Biomedical and Neuromotor Sciences and S. Orsola-Malpighi Hospital, Alma Mater Studiorum University of Bologna, Bologna, Italy
| | - Emanuela Marcelli
- Laboratory of Bioengineering, Department of Experimental, Diagnostic and Specialty Medicine (DIMES), Alma Mater Studiorum University of Bologna, Bologna, Italy
| | - Barbara Bortolani
- Laboratory of Bioengineering, Department of Experimental, Diagnostic and Specialty Medicine (DIMES), Alma Mater Studiorum University of Bologna, Bologna, Italy
| | - Claudio Marchetti
- Maxillofacial Surgery Unit, Department of Biomedical and Neuromotor Sciences and S. Orsola-Malpighi Hospital, Alma Mater Studiorum University of Bologna, Bologna, Italy
| | - Laura Cercenelli
- Maxillofacial Surgery Unit, Department of Biomedical and Neuromotor Sciences and S. Orsola-Malpighi Hospital, Alma Mater Studiorum University of Bologna, Bologna, Italy.,Laboratory of Bioengineering, Department of Experimental, Diagnostic and Specialty Medicine (DIMES), Alma Mater Studiorum University of Bologna, Bologna, Italy
| |
Collapse
|
9
|
JUNQUEIRA-JÚNIOR AA, MAGRI LV, CAZAL MS, MORI AA, RODRIGUES DA SILVA AMB, RODRIGUES DA SILVA MAM. Accuracy evaluation of tridimensional images performed by portable stereophotogrammetric system. REVISTA DE ODONTOLOGIA DA UNESP 2019. [DOI: 10.1590/1807-2577.08919] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
Abstract Introduction Human facial characteristics vary according to individual dental occlusion, facial harmony, orofacial musculature and the format and configuration of craniofacial structures. Traditionally, anthropometric measurements have been acquired through direct evaluation of subjects in a clinical environment using calipers and metric tapes to measure distances between arches and landmarks. Scientific breakthroughs have enabled the digitization of data and introduced the possibility of quick, precise, radiation-free acquisitions; details can be archived for future analysis and easily shared with patients and colleagues. Among new facial analysis methods, the stereophotogrammetry technique has emerged, which uses a group of cameras to take many photographs of a subject in rapid succession from multiple angles. Nowadays, portable stereophotogrammetric systems are being proposed, as they are more practical and easier to use. Objective The aim of this work was to analyze the accuracy and reproducibility of a portable 3D stereophotogrammetric system (Vectra H1, Canfield, Fairfield, NJ, USA) in measuring soft facial tissues of 30 participants, defining measures of a cube and comparing these measurements with those obtained by a set 3D stereophotogrammetric system (Vectra M3, Canfield, Fairfield, NJ, USA) with previously validated accuracy and reproducibility through quantitative analysis of possible errors. Material and method Thirty temporary landmarks were used to measure (in mm) 34 distances in 30 participants (n = 30). Regarding the cube, 12 angles and 9 linear distances were evaluated. Result The results obtained by the established methodology indicated that the Vectra H1 portable system has shown accuracy and reproducibility equal to that of the Vectra M3 set system. Conclusion Data analysis and correlation to literature findings show Vectra H1's capability to reliably capture tridimensional images, which makes it practical for use in diverse clinical applications.
Collapse
|
10
|
Ayoub F, Saadeh M, Fayyad-Kazan H, Haddad R. Stereophotogrammetric analysis of labial morphology in a young adult Middle-Eastern population. J Craniomaxillofac Surg 2018; 47:273-279. [PMID: 30594430 DOI: 10.1016/j.jcms.2018.12.001] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/15/2018] [Revised: 11/19/2018] [Accepted: 12/04/2018] [Indexed: 11/27/2022] Open
Abstract
INTRODUCTION The majority of previous research delineating the morphological characteristics of the orolabial region has been on Caucasian populations, with very minor research on Mediterranean populations, and none on the Lebanese population. AIM The primary aim was to collect information on the gender-specific 3D morphology of the mouth and lips in young Middle Eastern adults. The secondary aim was to explore the presence of associations between orolabial morphology and age and body mass index (BMI), and to assess correlations between linear orolabial dimensions and area/volume measures. METHODS The study used non-invasive stereophotogrammetry to collect information on gender-specific 3D labial morphology (linear distances, areas, and volumes) for 122 adult Lebanese subjects, aged 18-30 years (47 males, 75 females). Associations between labial morphology and age and body mass index were assessed, in addition to correlations between linear orolabial dimensions and area/volume measures. RESULTS All linear, angular, area, and volume lip measurements displayed significant variability. Both lip area and volume were smaller in the upper than in the lower lip. Eighteen out of the 20 linear measurements were significantly larger in males. The ratio, area, and volume measurements mostly displayed no statistically significant gender dimorphism. CONCLUSIONS Alongside presenting the first documented report on anthropometric labial measurements of a young Lebanese adult population, this research highlights the presence of gender dimorphism in linear and angular measurements, but not in area and volume measurements, and a strong association between certain linear labial measurements and lip area and volume. In addition, it presents pilot data on the association between labial anthropometry and body mass index.
Collapse
Affiliation(s)
- Fouad Ayoub
- Department of Forensic Odontostomatology and Human Identification, Faculty of Dental Medicine, Lebanese University, Beirut, Lebanon.
| | - Maria Saadeh
- Department of Forensic Odontostomatology and Human Identification, Faculty of Dental Medicine, Lebanese University, Beirut, Lebanon; Department of Orthodontics, Faculty of Dental Medicine, Lebanese University, Beirut, Lebanon; Division of Orthodontics and Dentofacial Orthopedics, American University of Beirut Medical Center, Beirut, Lebanon.
| | - Hasan Fayyad-Kazan
- Department of Basic Sciences, Faculty of Dental Medicine, Lebanese University, Beirut, Lebanon.
| | - Ramzi Haddad
- Division of Orthodontics and Dentofacial Orthopedics, American University of Beirut Medical Center, Beirut, Lebanon.
| |
Collapse
|
11
|
Elnagar MH, Elshourbagy E, Ghobashy S, Khedr M, Kusnoto B, Evans CA. Three-dimensional assessment of soft tissue changes associated with bone-anchored maxillary protraction protocols. Am J Orthod Dentofacial Orthop 2017; 152:336-347. [DOI: 10.1016/j.ajodo.2017.01.022] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/01/2016] [Revised: 01/01/2017] [Accepted: 01/01/2017] [Indexed: 11/29/2022]
|
12
|
Masoud MI, Bansal N, C Castillo J, Manosudprasit A, Allareddy V, Haghi A, Hawkins HC, Otárola-Castillo E. 3D dentofacial photogrammetry reference values: a novel approach to orthodontic diagnosis. Eur J Orthod 2017; 39:215-225. [PMID: 28339510 DOI: 10.1093/ejo/cjw055] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/14/2022]
Abstract
Background Orthodontic diagnostic standards generally use the cranial base as a reference and rely on samples selected by orthodontists. Objective The purpose of this study was to provide male and female standards for a novel non-radiographic approach for orthodontic diagnosis that utilizes 3D dentofacial photogrammetry using the eyes and natural head orientation as references instead of the cranial base. Methods One hundred and eighty females and 200 males between the ages of 18 and 35 years from 2 modeling agencies were orthodontically screened for near ideal occlusion. Subjects that met the inclusion criteria were rated by a sample of 40 lay people for attractiveness on a visual analogue scale. The final sample that had 3D facial and dental imaging included 49 subjects 25 males and 24 females with near ideal occlusion and considered attractive by the public. Results Inter and Intra-examiner ICC were greater than 0.8 for both landmarking and indexing. Relative to a coronal plane contacting the pupils (MC), the mean sagittal position of the alar curvature (representing the nasomaxillary complex) was 14.36 ± 3.08 mm in males and 12.4 ± 3.58 mm in females. The sagittal position of soft tissue pogonion relative to the pupils was 14.84 ± 3.63 mm in males and 12.78 ± 5.68 mm in females. The angle between the alar curvature and pogonion relative to the pupils was 9° in males and 10° in females. With the exception of the occlusal plane which was steeper in females, no ratios or angular facial measurements showed a significant gender difference. Relative to MC, males had more proclined upper incisors (20° vs 16°) and more retroclined Lower incisors (27° vs 31°; P > 0.05). A Procrustes ANOVA and permutation test showed that the shapes of males and females are different enough to be considered two distinct populations. Conclusions 1. When using the proposed method for orthodontic diagnosis, male and female patients should be compared to their respective dentofacial standards. 2. Validation of the proposed method and standards on an orthodontic population is underway to determine the scope its use.
Collapse
Affiliation(s)
- Mohamed I Masoud
- Department of Developmental Biology, Harvard School of Dental Medicine, Boston, MA, USA
| | - Neetu Bansal
- Department of Developmental Biology, Harvard School of Dental Medicine, Boston, MA, USA
| | - Jose C Castillo
- Department of Developmental Biology, Harvard School of Dental Medicine, Boston, MA, USA
| | - Amornrut Manosudprasit
- Department Orthodontics, Boston University, Henry M. Goldman School of Dental Medicine.,Department of Orthodontics, Khon Kaen University, Khon Kaen, Thailand
| | - Veerasathpurush Allareddy
- Department of Orthodontics, College of Dentistry and Dental Clinics, The University of Iowa, IA, USA, and
| | - Arshan Haghi
- Department of Orthodontics, College of Dentistry and Dental Clinics, The University of Iowa, IA, USA, and
| | - Hannah C Hawkins
- Department of Anthropology, Purdue University, West Lafayette, IN, USA
| | | |
Collapse
|
13
|
Correlation Assessment between Three-Dimensional Facial Soft Tissue Scan and Lateral Cephalometric Radiography in Orthodontic Diagnosis. Int J Dent 2016; 2016:1473918. [PMID: 27313615 PMCID: PMC4903122 DOI: 10.1155/2016/1473918] [Citation(s) in RCA: 25] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/21/2016] [Accepted: 04/12/2016] [Indexed: 11/17/2022] Open
Abstract
Purpose. The aim of the present prospective study was to investigate correlations between 3D facial soft tissue scan and lateral cephalometric radiography measurements. Materials and Methods. The study sample comprised 312 subjects of Caucasian ethnic origin. Exclusion criteria were all the craniofacial anomalies, noticeable asymmetries, and previous or current orthodontic treatment. A cephalometric analysis was developed employing 11 soft tissue landmarks and 14 sagittal and 14 vertical angular measurements corresponding to skeletal cephalometric variables. Cephalometric analyses on lateral cephalometric radiographies were performed for all subjects. The measurements were analysed in terms of their reliability and gender-age specific differences. Then, the soft tissue values were analysed for any correlations with lateral cephalometric radiography variables using Pearson correlation coefficient analysis. Results. Low, medium, and high correlations were found for sagittal and vertical measurements. Sagittal measurements seemed to be more reliable in providing a soft tissue diagnosis than vertical measurements. Conclusions. Sagittal parameters seemed to be more reliable in providing a soft tissue diagnosis similar to lateral cephalometric radiography. Vertical soft tissue measurements meanwhile showed a little less correlation with the corresponding cephalometric values perhaps due to the low reproducibility of cranial base and mandibular landmarks.
Collapse
|
14
|
Salazar-Gamarra R, Seelaus R, da Silva JVL, da Silva AM, Dib LL. Monoscopic photogrammetry to obtain 3D models by a mobile device: a method for making facial prostheses. J Otolaryngol Head Neck Surg 2016; 45:33. [PMID: 27225795 PMCID: PMC4881215 DOI: 10.1186/s40463-016-0145-3] [Citation(s) in RCA: 41] [Impact Index Per Article: 5.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/12/2016] [Accepted: 05/05/2016] [Indexed: 11/30/2022] Open
Abstract
Purpose The aim of this study is to present the development of a new technique to obtain 3D models using photogrammetry by a mobile device and free software, as a method for making digital facial impressions of patients with maxillofacial defects for the final purpose of 3D printing of facial prostheses. Methods With the use of a mobile device, free software and a photo capture protocol, 2D captures of the anatomy of a patient with a facial defect were transformed into a 3D model. The resultant digital models were evaluated for visual and technical integrity. The technical process and resultant models were described and analyzed for technical and clinical usability. Results Generating 3D models to make digital face impressions was possible by the use of photogrammetry with photos taken by a mobile device. The facial anatomy of the patient was reproduced by a *.3dp and a *.stl file with no major irregularities. 3D printing was possible. Conclusions An alternative method for capturing facial anatomy is possible using a mobile device for the purpose of obtaining and designing 3D models for facial rehabilitation. Further studies must be realized to compare 3D modeling among different techniques and systems. Clinical implication Free software and low cost equipment could be a feasible solution to obtain 3D models for making digital face impressions for maxillofacial prostheses, improving access for clinical centers that do not have high cost technology considered as a prior acquisition.
Collapse
Affiliation(s)
- Rodrigo Salazar-Gamarra
- UNIP Postgraduate Dental School, Universidade Paulista, Rua Afonso Braz, 525 - Cj. 81 Vila Nova Conceição, São Paulo, CEP 04511-011, SP, Brazil.
| | - Rosemary Seelaus
- The Craniofacial Center, University of Illinois at Chicago, 811 S Paulina St, Chicago, IL, 60612, USA
| | - Jorge Vicente Lopes da Silva
- Division of the Centro Tecnológico da Informação Renato Archer, Rodovia Dom Pedro I, Km 143, 6 - Amarais, Campinas, SP, 13069-901, Brazil
| | - Airton Moreira da Silva
- Centro Tecnológico da Informação Renato Archer Campinas, Rodovia Dom Pedro I, Km 143, 6 - Amarais, Campinas, SP, 13069-901, Brazil
| | - Luciano Lauria Dib
- UNIP Postgraduate Dental School, Universidade Paulista, Rua Afonso Braz, 525 - Cj. 81 Vila Nova Conceição, São Paulo, CEP 04511-011, SP, Brazil.,Oncology Center, Hospital Alemão Oswaldo Cruz, Rua Afonso Braz, 525 - Cj. 81 Vila Nova Conceição, São Paulo, CEP 04511-011, SP, Brazil
| |
Collapse
|
15
|
|
16
|
Dindaroğlu F, Kutlu P, Duran GS, Görgülü S, Aslan E. Accuracy and reliability of 3D stereophotogrammetry: A comparison to direct anthropometry and 2D photogrammetry. Angle Orthod 2015; 86:487-94. [PMID: 26267357 DOI: 10.2319/041415-244.1] [Citation(s) in RCA: 102] [Impact Index Per Article: 11.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022] Open
Abstract
OBJECTIVE To evaluate the accuracy of three-dimensional (3D) stereophotogrammetry by comparing it with the direct anthropometry and digital photogrammetry methods. The reliability of 3D stereophotogrammetry was also examined. MATERIALS AND METHODS Six profile and four frontal parameters were directly measured on the faces of 80 participants. The same measurements were repeated using two-dimensional (2D) photogrammetry and 3D stereophotogrammetry (3dMDflex System, 3dMD, Atlanta, Ga) to obtain images of the subjects. Another observer made the same measurements for images obtained with 3D stereophotogrammetry, and interobserver reproducibility was evaluated for 3D images. Both observers remeasured the 3D images 1 month later, and intraobserver reproducibility was evaluated. Statistical analysis was conducted using the paired samples t-test, intraclass correlation coefficient, and Bland-Altman limits of agreement. RESULTS The highest mean difference was 0.30 mm between direct measurement and photogrammetry, 0.21 mm between direct measurement and 3D stereophotogrammetry, and 0.5 mm between photogrammetry and 3D stereophotogrammetry. The lowest agreement value was 0.965 in the Sn-Pro parameter between the photogrammetry and 3D stereophotogrammetry methods. Agreement between the two observers varied from 0.90 (Ch-Ch) to 0.99 (Sn-Me) in linear measurements. For intraobserver agreement, the highest difference between means was 0.33 for observer 1 and 1.42 mm for observer 2. CONCLUSIONS Measurements obtained using 3D stereophotogrammetry indicate that it may be an accurate and reliable imaging method for use in orthodontics.
Collapse
Affiliation(s)
- Furkan Dindaroğlu
- a Research Assistant, Gülhane Military Medical Academy, Dental Sciences Center, Department of Orthodontics, Ankara, Turkey
| | - Pınar Kutlu
- b PhD student, Gülhane Military Medical Academy, Dental Sciences Center, Department of Orthodontics, Ankara, Turkey
| | - Gökhan Serhat Duran
- b PhD student, Gülhane Military Medical Academy, Dental Sciences Center, Department of Orthodontics, Ankara, Turkey
| | - Serkan Görgülü
- c Associate Professor, Gülhane Military Medical Academy, Dental Sciences Center, Department of Orthodontics, Ankara, Turkey
| | - Erhan Aslan
- d Biomedical Engineer, Gülhane Military Medical Academy, Medical Design and Manufacturing Center, Ankara, Turkey
| |
Collapse
|
17
|
Comparison of lateral photographic and radiographic sagittal analysis in relation to Angle's classification. J Orofac Orthop 2015; 76:294-304. [PMID: 26123731 DOI: 10.1007/s00056-015-0292-6] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/23/2022]
Abstract
OBJECTIVE The goal of this study was to compare sagittal jaw relationships derived from standardized profile photographs (soft tissue) to those derived from lateral cephalograms (hard tissue) with respect to Angle's classification of malocclusion. METHODS A total of 110 randomly selected subjects (mean age: 13.75 ± 1.46 years) undergoing treatment (Postgraduate Program in Orthodontics at Tel Aviv University) were assigned to three groups based on Angle's classification (Class I: n = 30; Class II: n = 50; Class III: n = 30). Standardized profile-view photographs and lateral radiographs (cephalograms) were compared using 11 soft tissue and 8 skeletal measurements, respectively. RESULTS Tragus, infra-orbital, nasion, A point, B point, and pogonion were found to be the most reliable soft tissue reference points. A similar pattern of diversity was found between the three groups of Angle's classification (Class I/II/III) for the photographic soft,-tissue and the radiographic skeletal measurements (e.g., soft tissue A'N'B' =11.43°/13.30°/8.85° and hard tissue ANB = 3.13°/4.64°/-1.31°). Soft tissue A'N'B' measurement provides complementary information to hard tissue ANB measurement. CONCLUSION Analyzing profile photographs for evaluating sagittal jaw relationships is a practical tool in determining soft tissue harmony. Soft tissue measurements provide a sagittal differential diagnosis in relation to Angle's classification of malocclusion.
Collapse
|
18
|
Raschke GF, Rieger UM, Peisker A, Djedovic G, Gomez-Dammeier M, Guentsch A, Schaefer O, Schultze-Mosgau S. Morphologic outcome of bimaxillary surgery--an anthropometric appraisal. Med Oral Patol Oral Cir Bucal 2015; 20:e103-10. [PMID: 25475769 PMCID: PMC4320412 DOI: 10.4317/medoral.19978] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/17/2014] [Accepted: 06/17/2014] [Indexed: 11/05/2022] Open
Abstract
OBJECTIVES To adequately perform orthognathic surgery procedures, it is from basic interest to understand the morphologic changes caused by orthognathic surgery. Anthropometric analyses of standardized frontal view and profile photographs could help to investigate and understand such changes. STUDY DESIGN We present a pre- to postoperative evaluation of orthognathic surgery results based on anthropometric indices described by Farkas and cephalometric measurements. 30 Class III patients undergoing maxillary advancement by Le Fort I Osteotomy and mandibular setback by bilateral sagittal split osteotomy were evaluated. Preoperative as well as three and nine months postoperative lateral cephalograms as well as standardized frontal view and profile photographs were taken. On the photographs 21 anthropometric indices given by Farkas were evaluated. In cephalograms SNA and SNB angle as well as Wits appraisal were investigated. RESULTS The investigated anthropometric indices showed a significant increase of the vertical height of the upper lip without changing the relation of the upper vermilion to the cutaneous upper lip. The lower vermilion height increased relatively to the cutaneous lower lip without vertical changes in the lower lip. Due to maxillary advancement the upper face height increased meanwhile the lower face height decreased due to mandibular setback. SNA and SNB angle and Wits appraisal showed typical changes related to surgery. CONCLUSIONS The investigated photo-assisted anthropometric measurements presented reproducible results related to bimaxillary surgery.
Collapse
Affiliation(s)
- Gregor F Raschke
- Department of Oral & Maxillofacial/Plastic Surgery, Friedrich Schiller University Jena, Erlanger Allee 101, 07747 Jena, Germany,
| | | | | | | | | | | | | | | |
Collapse
|
19
|
Fink M, Medelnik J, Strobel K, Hirschfelder U, Hofmann E. Metric precision via soft-tissue landmarks in three-dimensional structured-light scans of human faces. J Orofac Orthop 2014; 75:133-43. [PMID: 24577017 DOI: 10.1007/s00056-013-0201-9] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/17/2013] [Accepted: 05/13/2013] [Indexed: 10/25/2022]
Abstract
OBJECTIVES The goal of the current work was to investigate the suitability of ten facial soft-tissue landmarks (trichion, glabella, nasion, left and right orbital, subnasal, left and right porion, pogonion, gnathion) as reference points for metric facial analysis by analyzing their intra- and interserial precision in all three dimensions. METHODS The faces of 32 volunteers were scanned using a standardized protocol with a structured-light scanner (FaceSCAN(3D) Scientific Photolab 60 Hz; 3D Shape, Erlangen, Germany). Three examiners placed the landmarks twice within a 2-week interval. Image processing (Onyx Ceph(3); Image Instruments; Chemnitz, Germany) and statistical (SAS 9.2; SAS Institute, Cary, NC, USA) software was used for analysis. All measurements were corrected for mean values per patient and analyzed for intraserial and interserial error by model II ANOVA for a simple classification with random effects. RESULTS Median intraserial precision was 0.40 mm (range 0.05-1.01 mm) overall, including 0.40 mm (0.33-0.85 mm) on the x-axis, 0.64 mm (0.36-0.87 mm) on the y-axis, and 0.27 mm (0.05-1.01 mm) on the z-axis. Interserial precision was substantially lower at a median of 0.05 mm (0-0.22 mm), often not statistically assessable with intraserial precision. We observed no landmark-associated differences; in particular, the medians of the bilateral landmarks orbital (intraserial: 0.40 mm; interserial: 0.02 mm) and porion (intraserial: 0.36 mm; interserial: small and not assessable) were in the middle of the range of our results. Trichion (intraserial: 0.73 mm; interserial: 0.05 mm) and gnathion (intraserial: 0.87 mm; interserial: 0.20 mm) revealed the highest degrees of intraserial measurement imprecision. Outliers were identified in 1.2% (64 of 5400) of measurements. CONCLUSION All selected landmarks offer suitably high levels of intra- and interserial precision for the three-dimensional (3D) metric assessment of facial soft-tissue parameters. No difference between (bi)lateral and facial midline landmarks was noted.
Collapse
Affiliation(s)
- M Fink
- Department of Orthodontics and Orofacial Orthopedics (Zahnklinik 3 - Kieferorthopädie), University of Erlangen-Nuremberg, Glückstr. 11, 91054, Erlangen, Germany,
| | | | | | | | | |
Collapse
|
20
|
Farronato G, Salvadori S, Nolet F, Zoia A, Farronato D. Assessment of inter- and intra-operator cephalometric tracings on cone beam CT radiographs: comparison of the precision of the cone beam CT versus the latero-lateral radiograph tracing. Prog Orthod 2014; 15:1. [PMID: 24393493 PMCID: PMC3910229 DOI: 10.1186/2196-1042-15-1] [Citation(s) in RCA: 24] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/27/2013] [Accepted: 11/12/2013] [Indexed: 02/06/2023] Open
Abstract
BACKGROUND In this study we aimed at quantifying the possible errors which may occur when assessing specific reference planes and linear derivants on cephalometric radiographs traced manually and digitally. Furthermore, we have compared the precision of the tracings according to both the two- and three-dimensional (2D and 3D respectively) techniques and between clinicians. FINDINGS We have obtained via cone beam computed tomography (CBCT) archive of the orthodontics department of the University of Milan 20 cone beam CT radiographs from which we have obtained 20 latero-lateral radiographs. Five independent clinicians referred to as A, B, C, D, E have been randomly selected to trace both radiographs maintaining the same working and lighting conditions to minimize the possibility of operator- and environment-dependent errors from occurring. The results have been statistically assessed by Student's t test. The comparison of the data gathered from the tracings in 2D and 3D shows that certain measurements have statistically significant differences. Particularly, the difference in the measurements of the sagittal dimension of the mandible and the anterior and posterior nasal spines has resulted to be statistically significant. The results of the intra-operator comparison proved that the 3D technique is extremely precise. CONCLUSION Our study determines that the 3D technique allows to obtain more precise results and with several advantages when compared to the conventional technique such as a true representation of the anatomical structures, less risk of errors occurring due to clinician skills and absence of overlapping anatomical structures.
Collapse
|
21
|
Digital 3D image of bimaxillary casts connected by a vestibular scan. J Orofac Orthop 2013; 74:309-18. [DOI: 10.1007/s00056-013-0152-1] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/25/2012] [Accepted: 11/13/2012] [Indexed: 11/27/2022]
|
22
|
Raschke GF, Rieger UM, Bader RD, Guentsch A, Schaefer O, Schultze-Mosgau S. Soft tissue outcome after mandibular advancement--an anthropometric evaluation of 171 consecutive patients. Clin Oral Investig 2012; 17:1415-23. [PMID: 22893037 DOI: 10.1007/s00784-012-0821-2] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/09/2012] [Accepted: 08/01/2012] [Indexed: 11/26/2022]
Abstract
OBJECTIVES There is an ongoing discussion in the literature about preoperative planning and postoperative evaluation of orthognathic surgery and its impact on facial appearance and aesthetics. MATERIALS AND METHODS We present an anthropometric and cephalometric evaluation of orthognathic surgery results based on reference anthropometric data. In 171 Class II patients, mandibular advancement by bilateral sagittal split osteotomy was performed. Preoperative as well as 3 and 9 months postoperative standardized frontal view and profile photographs and lateral cephalograms were evaluated in a standardized manner by use of 21 anthropometric indices. In cephalograms, SNA and SNB angle as well as Wits appraisal were investigated. Results of anthropometric and cephalometric measurements were correlated. RESULTS Lower vermilion contour, vermilion and cutaneous total lower lip height, nose-lower face height, nose-face height, upper face-face height, upper lip- and chin-mandible height index showed significant pre- to postoperative changes as well as SNB angle and Wits appraisal. Furthermore, medial-lateral cutaneous upper lip height, vermilion and cutaneous total lower lip height and philtrum-mouth width index presented significant correlations to cephalometric measurements. CONCLUSIONS The investigated anthropometric indices and cephalometric measurements presented reproducible results related to surgery. The correlation of cephalometric to anthropometric measurements has been proven useful for preoperative planning and postoperative evaluation of orthognathic surgery patients. CLINICAL RELEVANCE The presented anthropometric measurements and their observed correlation to cephalometric measurements could lead to a better prediction and optimized planning of the soft tissue result in orthognathic surgery patients and thereby improve the aesthetic outcome.
Collapse
Affiliation(s)
- Gregor F Raschke
- Department of Cranio-Maxillofacial & Plastic Surgery, Friedrich Schiller University Jena, Erlanger Allee 101, Jena, Germany
| | | | | | | | | | | |
Collapse
|
23
|
|
24
|
Kochel J, Meyer-Marcotty P, Kochel M, Schneck S, Stellzig-Eisenhauer A. 3D soft tissue analysis--part 2: vertical parameters. J Orofac Orthop 2010; 71:207-20. [PMID: 20503003 DOI: 10.1007/s00056-010-9943-9] [Citation(s) in RCA: 12] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/01/2009] [Accepted: 02/11/2010] [Indexed: 11/28/2022]
Abstract
INTRODUCTION The increasing relevance of 3D methods in orthodontic diagnostics and treatment planning calls for the development of new analysis methods and the definition of three-dimensional mean values. OBJECTIVE The aim of this study was to develop a reliable three-dimensional (3D) analysis of facial soft tissues. Our objectives were to determine vertical 3D mean values and define the relationship between vertical skeletal parameters and digitally-recorded 3D soft tissue parameters. PATIENTS AND METHODS A total of 100 adult patients (female symbol = 53, male symbol = 47) of Caucasian ethnic origin were included in the study. Patients with syndromes, cleft lip and palate, noticeable asymmetry or anomalies in the number of teeth were excluded. Arithmetic means for three vertical 3D soft tissue parameters were calculated. The parameters were analyzed biometrically in terms of their reliability and gender-specific differences. Furthermore, the 3D soft tissue values were analyzed with regard to any correlations with vertical cephalometric values. In addition, we employed stepwise discriminant analysis, a multivariate statistical method, to examine the extent to which correct assessment of craniofacial morphology is possible by referring to those 3D parameters. RESULTS We successfully defined reproducible 3D mean values for the 3D soft tissue parameters, demonstrating highly significant correlations between the vertical 3D soft tissue measurements and cephalometric measurements. 89.8% of the patients could be correctly assigned to a vertical or horizontal craniofacial morphology according to the 3D soft tissue values. CONCLUSION 3D soft tissue analysis provides information about vertical skeletal parameters, allowing assessment of vertical craniofacial morphology. Further investigation will be required so that 3D soft tissue diagnosis can be integrated into treatment planning and assessment as a supportive diagnostic tool in the future.
Collapse
Affiliation(s)
- Janka Kochel
- Department of Orthodontics, University of Wuerzburg, Pleicherwall 2, Wuerzburg, Germany.
| | | | | | | | | |
Collapse
|