Radialer externer Fixateur zur geschlossenen Behandlung problematischer suprakondylärer Humerusfrakturen Typ III und IV bei Kindern und Jugendlichen: Eine neue chirurgische Technik

Dual Joystick Technique for Reduction of Torsional Profile in Pediatric Supracondylar Humerus Fracture With Delayed Presentation

BACKGROUND

Reduction of some modified Gartland type III and IV supracondylar humerus fractures can pose difficulties, especially if they present late to the hospital. Various techniques of reduction have been tried for reducing the supracondylar humerus fracture for sagittal and coronal plane correction. This retrospective study assesses the dual joystick technique's possible effectiveness in achieving an anatomical reduction of the supracondylar humerus fracture.

METHODS

Patients with modified Gartland's type III and IV supracondylar humerus fractures who underwent closed reduction and percutaneous pinning using the dual joystick technique at our trauma center between January 2020 and January 2022 were the subject of a retrospective review. Forty-six patients treated by the above technique who met the inclusion criteria were analyzed at the end of the final follow-up.

RESULTS

The mean age of the children was 7.9+/- 2.25 years, with a male predominance at 32:14. The Right upper limb was more involved compared to the left side. The mean injury to hospital presentation was 2.67+/- 1.28 days, and the mean surgical duration was 24.57+/- 13.76 minutes. The average pin spread ratio at the fracture site was 35.17+/- 3.04%. Baumann angle at the final follow-up was 74.83+/- 2.56 degrees. The mean lateral rotation percentage was 2.8+/- 1.3%. 39 patients had excellent cosmetic outcomes, and 42 had excellent functional outcomes, whereas 7 and 4 patients had good cosmetic and functional outcomes, respectively, according to Flynn criteria.

CONCLUSIONS

In modified Gartland type III and IV fractures with late presentation where reduction is challenging, this technique is shown to be convenient and easily reproducible and helps accomplish near anatomical reduction with reduced lateral rotation percentage and results in excellent to good outcomes.

Minimally invasive techniques utilizing the "Joy Stick" method for managing irreducible flexion-type supracondylar fractures of the humerus in older children

OBJECTIVE

In this study, we investigated the efficacy of percutaneous poking reduction and Kirschner wire fixation in older children with irreducible supracondylar flexion-type fractures of the humerus.

METHODS

This retrospective investigation included 27 children, comprising 15 males and 12 females, aged between 10 years and 3 months to 14 years and 11 months, all diagnosed with a flexion-type supracondylar fracture of the humerus within one week of trauma. All patients underwent surgery under general anesthesia. Following unsuccessful manual reduction, percutaneous poking reduction with Kirschner wires was performed under C-arm fluoroscopy to achieve fracture reduction. Following successful reduction, three 2.0 mm Kirschner wires were inserted in a cross pattern to secure the fracture ends. Postoperatively, the elbow joint was immobilized in a functional position with a plaster cast for four weeks.

RESULTS

Follow-up in the outpatient department ranged from 9 to 36 months. Clinical functional assessment using Flynn's criteria rated 24 cases as excellent, 2 as good, and 1 as fair, yielding an overall efficacy of 96.3%. No cases of fracture re-displacement, fracture fragment necrosis, or other complications such as nonunion, iatrogenic nerve injury, myositis ossificans, or long-term elbow joint dysfunction were observed during the postoperative follow-up.

CONCLUSION

The percutaneous poking reduction and Kirschner wire fixation technique is a simple and reliable procedure for treating irreducible flexion-type supracondylar fractures of the humerus in older children, with minimal trauma. This technique offers substantial stability for the fracture and results in excellent long-term recovery of joint function.

Percutaneous reduction and cannulated screw fixation assisted by 3D printing technology of calcaneal fractures in children

BACKGROUND

Percutaneous reduction and cannulated screw fixation (PR + CSF) for treatment of calcaneal fractures in pediatric patients has been proven to achieve satisfactory outcomes with few complications. But it is also a difficult technology due to the limited exposure and surgeons are unable to reduce articular surface under direct vision. The purpose of this study was to analyze the outcomes of applying 3D printing technology to preoperative preparation and Intraoperative operating for the treatment of calcaneal fractures in children.

METHODS

Pediatric patients with calcaneal fractures from January 2010 to December 2018 were reviewed during study period. Preoperative radiographs and computed tomography scans were collected to classify the fractures, reconstruct 3D printed model and evaluate postoperative outcomes. The blood loss, operative time, number of fluoroscopies, surgeon and patient satisfaction were used to assess the effectiveness, feasibility and safety of 3D printing technology. Functional results were measured by American Orthopedic Foot and Ankle Society (AOFAS) hindfoot score.

RESULT

12 patients (10 boys and 2 girls) with 17 fractures were involved in our study. There were significant differences in the average Böhler angle before operation compared with that after operation and at last follow-up (P < 0.001). Similarly, the calcaneal height and length postoperatively and at the end of follow-up time were proved to have significant difference (P < 0.05) compared to preoperative. CT scan showed good reduction of the posterior facet according to Goldzak index. The average subjective AOFAS hindfoot score was 94.1. Both patients and surgeon made sense of the 3D printed model that can help them getting more information about the factures and making preoperative plans. No wound complication was found in this study.

CONCLUSION

This study indicated that percutaneous reduction and cannulated screw fixation (PR + CSF) assisted by 3D printing technology in the treatment of calcaneal fractures in pediatric patients achieve good outcomes, with specific preoperative preparation, satisfactory functional recovery and fewer complications.

LEVEL OF EVIDENCE

III.

Is methyl methacrylate fixator reliable for the treatment of gartland type IV supracondylar fractures?

Background

In childhood supracondylar fractures of the humerus, fixation with percutaneous Kirschner wire is the standard treatment. In the case of irreducible-unstable fractures, these can be defined as fractures in which reduction is not well-achieved or in which fixation cannot be achieved with the K-wire. Intraoperative management of these types of fractures may be difficult. Treatment with a methyl methacrylate fixator consisting of K-wire and methyl methacrylate cement, as defined by the senior author of the article, may be a good option for Gartland type IV supracondylar humeral fractures where the fracture is unstable in flexion and extension due to complete periosteal tearing.

Materials and Methods

The short-term and mid-term results of 27 patients between the ages of 4-12 with Gartland type IV supracondylar fracture of the humerus treated with methyl methacrylate fixation were reviewed. The patients were scored in terms of function and cosmetic satisfaction.

Results

A total of 19 of the 27 patients treated with the methyl methacrylate fixator had full elbow motion function and rated the outcome of the treatment as excellent, which was judged by orthopedic surgeons on the basis of Flynn's criteria. Six patients had nearly full elbow motion and evaluated their recovery outcome as good. Two patients reported nearly full range of motion (ROM) and evaluated the method as moderate in terms of treatment.

Discussion

Treatment with the methyl methacrylate fixation method is an inexpensive method that allows early joint mobilization, provides strong biomechanical stability, ensures good outcomes, and should be considered in the treatment of irreducible and unstable supracondylar fractures of the humerus.

[Typical liability damages of the upper extremities in childhood and their evaluation]

Legal appraisals of possible treatment errors in childhood and adolescence are rare, often refer to the treatment of trauma of the upper limbs and are frequently recognized. From the activity of the first author as an expert witness 31 expert opinions (25%) referred to the upper limbs. Supracondylar humeral fractures, radius neck fractures, radial condyle fractures and distal radius fractures were predominant. A primary treatment error was determined in 14 patients and a secondary error in 7 patients. This corresponds to a recognition rate of 68%. The aim of this study was the reflection and the development of a prevention strategy. Insufficient recognition of instability (radial condyle), inadequate reduction and inadequate stabilization (radius neck, supracondylar) as well as untreated malalignments and secondary dislocations (wrist) were the main reproaches. Poor communication and deficient documentation often aggravate the situation. Working along clear algorithms can help to avoid legal proceedings and assignment of guilt.

[Technique and biomechanics of Kirschner wire osteosynthesis in children]

OBJECTIVE

Safe and stable fixation of metaphyseal and epiphyseal fractures by Kirschner (K-)wire osteosynthesis. Use of various K‑wire configurations depending on the fracture morphology.

INDICATIONS

In accordance with the AO Pediatric Comprehensive Classification of Long-Bone Fractures (PCCF), all Salter-Harris (SH) and metaphyseal fractures as well as fractures of the foot and hand independent of the reduction technique, closed or open, provided that adaptation osteosynthesis allows sufficient stability. Fixation/immobilization in a plaster cast is mandatory after K‑wire osteosynthesis.

CONTRAINDICATIONS

All diaphyseal fractures, if a K-wire is not used as an intramedullary nail. Fractures that can not be correctly reduced or are nonreducible fractures.

SURGICAL TECHNIQUE

After closed or open, as anatomical reduction as possible, one, two, occasionally three K‑wires per fragment are inserted under fluoroscopic control. Care must be taken that the K‑wires optimally capture the fragment to be fixed as well as the main fragment (metaphysis). It must therefore be possible to make a strictly lateral and correct anteroposterior x‑ray by image intensifier. It is important that the C‑arm can be positioned at the appropriate level. Rotating the limb should be minimized, as prior to fixation the previously reduced fragments may shift again, resulting in poor K‑wire fixation. Depending on the morphology of the fracture, size of the fragments and location of the fracture (humerus, forearm, femur or tibia, hand or foot), the K‑wiring technique must be adapted, e.g., mono-laterally crossed, mono-laterally divergent, in an ascending or descending direction, or the most commonly used ascending crossed technique. In most cases, the K‑wires protrude through the sin and the exposed ends are bent. This allows removal without renewed anesthesia in the outpatient setting. K‑wire osteosynthesis is neither a compression osteosynthesis (OS) nor a neutralization OS, but is always an adaptation and fixation of the fragments. Therefore, K‑wire OS always needs additional immobilization using a plaster or prefabricated splint.

POSTOPERATIVE MANAGEMENT

Immobilization in plaster cast for 4-5 weeks, depending on the age; care must be taken to avoid interference between the cast and the skin/K-wires.

RESULTS

With technically and optimally performed fixation and correct indication for K‑wire OS, as well as adequate posttreatment, very good to good results are achieved.

Health-related quality of life after paediatric supracondylar humeral fractures

AIMS

We aimed to evaluate the health-related quality of life (HRQoL) in children with supracondylar humeral fractures (SCHFs), who were treated following the recommendations of the Paediatric Comprehensive AO Classification, and to assess if HRQoL was associated with AO fracture classification, or fixation with a lateral external fixator compared with closed reduction and percutaneous pinning (CRPP).

METHODS

We were able to follow-up on 775 patients (395 girls, 380 boys) who sustained a SCHF from 2004 to 2017. Patients completed questionnaires including the Quick Disabilities of the Arm, Shoulder and Hand questionnaire (QuickDASH; primary outcome), and the Pediatric Quality of Life Inventory (PedsQL).

RESULTS

An AO type I SCHF was most frequent (327 children; type II: 143; type III: 150; type IV: 155 children). All children with type I fractures were treated nonoperatively. Two children with a type II fracture, 136 with a type III fracture, and 141 children with a type IV fracture underwent CRPP. In the remaining 27 children with type III or IV fractures, a lateral external fixator was necessary for closed reduction. There were no open reductions. After a mean follow-up of 6.3 years (SD 3.7), patients with a type I fracture had a mean QuickDASH of 2.0 (SD 5.2), at a scale of 0 to 100, with lower values representing better HRQoL (type II: 2.8 (SD 10.7); type III: 3.3 (SD 8.0); type IV: 1.8 (SD 4.6)). The mean function score of the PedsQL ranged from 97.4 (SD 8.0) for type I to 96.1 (SD 9.1) for type III fractures, at a scale of 0 to 100, with higher values representing better HRQoL.

CONCLUSION

In this cohort of 775 patients in whom nonoperative treatment was chosen for AO type I and II fractures and CRPP or a lateral external fixator was used in AO type III and IV fractures, there was equally excellent mid- and long-term HRQoL when assessed by the QuickDASH and PedsQL. These results indicate that the treatment protocol followed in this study is unambiguous, avoids open reductions, and is associated with excellent treatment outcomes. Cite this article: Bone Joint J 2020;102-B(6):755-765.

Surgical management of delayed Gartland type III supracondylar humeral fractures in children: A retrospective comparison of radial external fixator and crossed pinning

Radial external fixator has been proposed to treat delayed irreducible Gartland type III supracondylar humeral fracture, and this study aims to compare its effects with crossed pinning in a retrospective fashion. Delayed supracondylar humeral fracture is defined as more than 72 hours after injury, 2 or more than 2 times failed attempts of closed reduction can be deemed as irreducible fracture.Between January 2010 and January 2017, patients of Gartland type III supracondylar fractures of the humerus receiving surgery were all selected and reviewed. Overall, 39 patients fitting the inclusion criteria were chosen for the External Fixator Group and patients for control group of crossed pinning with matched age, sex, and clinical parameters (fracture location, injured side, and fracture type) were selected from the database. Surgery duration, number of intraoperative X-ray images, incidence of ulnar nerve injury, postoperative redisplacement, and function of the elbow joint were recorded and analyzed.In this study, 39 patients treated with radial external fixator had significantly shorter surgery duration, fewer intraoperative X-ray images, and lower incidence of ulnar nerve injury, and postoperative redisplacement than those receiving crossed pinning. Patients in 2 groups displayed similar range of motion for elbow joint at follow-up.Radial external fixator is an effective and safe method to treat Gartland type III supracondylar fractures that were diagnosed late.

Use of external fixation for juxta-articular fractures in children

In this article, the use of external fixation in the management of juxta-articular fractures in paediatric patients is discussed. Basic principles of Ilizarov technique are described for distal radial, distal femoral, distal humeral and distal tibial fractures. Common indications for external fixation in pediatric fractures are comminuted, complicated, and/or open fractures, particularly at the distal humerus, distal radius, distal femur and distal tibia. There are several benefits of external frame fixation in these type of injuries in children. This method avoids additional injury to the growth plate as K-wires are not placed through it. It enables careful reduction without interfragmentary compression and correct anatomic alignment. There is no soft tissue dissection and periosteal blood supply is preserved. External fixation ensures primary fracture stability even in presence of comminution and high adjustment capability. Immediate joint motion and early weight-bearing are further advantages. Joint bridging is an option in severe bone loss or soft tissue injuries.

Development of a System for Real-Time Monitoring of Pressure, Temperature, and Humidity in Casts

Cast fixation is a general clinical skill used for the treatment of fractures. However, it may cause many complications due to careless treatment procedures. Currently, swathing a cast for a patient can only be determined by a doctors' experience; however, this cannot be determined by the value of pressure, temperature, or humidity with objective and reliable equipment. When swathing a cast for a patient, the end result is often too tight or too loose. Hence, in this paper we developed a sensor for detecting pressure, temperature, and humidity, respectively. This could provide reliable reference cast data to help physicians to understand the tightness of cast swathing and to adjust the tightness of cast swathing instantly to alleviate a patient's complications caused by excessive pressure or overheating. In this paper, six pressure sensors and one temperature-humidity sensor are used to detect the pressure, temperature, and humidity in an arm swathed with a cast to confirm whether the tightness of the cast is fixing the fracture efficiently, while avoiding causing any damage by using excessive pressure. Currently, the variation in temperature and humidity can be detected by the inflammation of the wound, displaying secretions, and fever in the cast. Based on the experiments, the voltage and power conversion coefficients of the developed sensors could be compensated for by the nonlinear error of the sensor. The experimental results could be instantly displayed on a human interface, such as a smart mobile device. The average skin pressure in a swathed cast was 12.14 g and ranged from 5.0 g to 17.5 g. A few casts exceeded 37.50 g. The abnormal pressure of wrinkles produced during swathing a cast often ranged from 22.50 g to 38.75 g. This shows that cast wrinkles cause pressure on the skin. The pressure caused by cast wrinkles on bone protrusions ranged from 56.5 g to 84.4 g. Compared to other parts that lacked soft skin cushioning, the pressure of cast wrinkles that occurred in the ulna near the protrusion of the wrist bone increased averagely. The pressure error value was less than 2%, the temperature error was less than 1%, and the humidity error was less than 5%. Therefore, they were all in line with the specifications of commercially available products. The six pressure detection points and one temperature and humidity detection point in our newly designed system can accurately measure the pressure, temperature, and humidity inside the cast, and instantly display the corresponding information by mobile APP. Doctors receive reliable reference data and are instantly able to understand the tightness of the swathed cast and adjust it at any time to avoid complications caused by pressure or overheating due to excessive pressure.

[Fractures of the upper limbs in childhood and adolescence]

Fractures of the upper limbs are frequent and often need operative treatment in addition to a well-indicated conservative management. This depends on the maturity of the nearest growth plate and the local remodeling potential, which is dependent on age. Following conventional x‑ray imaging an individual prognostic growth analysis leads to the therapeutic decision. Around the elbow and the shaft of the forearm, criteria are stricter than near the shoulder or wrist. Gilchrist or Desault bandages as well as braces are adequate for most subcapital and humeral shaft fractures. The short forearm cast is the method of choice at the wrist. In the case of osteosynthesis the elastic stable intramedullary nailing (ESIN) method is the first choice for subcapital humerus, radial neck and shaft fractures. Screw fixation is usually carried out for epicondylar and condylar fractures and for supracondylar and wrist fractures K‑wires represent the standard procedure.

Biomechanical comparison of different external fixator configurations for stabilization of supracondylar humerus fractures in children

BACKGROUND

Currently, closed reduction and percutaneous pinning are considered the treatment of choice for displaced supracondylar humerus fractures. However, indications exist for the use of external fixation with Schanz screws. In this in vitro study, we evaluate the biomechanical properties of a new variation for external fixation and compare them to an established construct.

METHODS

Twenty distal cadaver humeri (10 pairs) were allocated to 2 groups. The humeri of the first group were fixed by an external fixator consisting of Schanz screws and an oblique K-wire inserted from the distal radial cortex of the humerus, those of the second group were fixed by a new variation with the oblique K-wire inserted from the distal ulnar cortex of the humerus. Displacement and stiffness in static loading in internal and external rotation, as well as in extension and flexion were evaluated and compared.

FINDINGS

The variation of the external fixator of the second group proved to be statistically significantly superior to the variation of the first group in internal rotation loading (p>0.05). In sagittal loading conditions and external rotation loading, the variations were equally stable (p>0.05). There was no significant effect of the samples' bone density on displacement and stiffness values in any direction of loading.

INTERPRETATION

In cases of pediatric supracondylar humerus fractures when an external fixator is used for osteosynthesis, the insertion of an additional ulnarly inserted anti-rotation K-wire should be preferred to a radially inserted one as it reduces secondary displacement of the distal fragment.

[Treatment of posttraumatic cubitus varus in children and adolescents. Supracondylar humeral osteotomy using radial external fixation]

OBJECTIVE

Precise adaptable fixation of a supracondylar humerus osteotomy with a radial/lateral external fixator to correct posttraumatic cubitus varus.

INDICATIONS

Acquired, posttraumatic cubitus varus as a result of a malhealed and unsatisfactorily treated supracondylar humerus fracture. Idiopathic, congenital cubitus varus (very seldom) if the child (independent of age and after complete healing) is cosmetically impaired; stability of the elbow is reduced due to malalignment (hyperextension); secondary problems and pain (e. g., irritation of the ulnar nerve) are expected or already exist; or there is an explicit wish of the child/parents (relative indication).

CONTRAINDICATIONS

In principle there are no contraindications provided that the indication criteria are filled. The common argument of age does not represent a contraindication in our opinion, since angular remodeling at the distal end of the humerus is practically nonexistent.

SURGICAL TECHNIQUE

Basically, the surgical technique of the radial external fixator is used as previously described for stabilization of complex supracondylar humeral fractures. With the patient in supine position, the arm is placed freely on an arm table. Using a 4-5 cm long skin incision along the radial, supracondylar, the extracapsular part of the distal humerus is prepared, whereby great caution regarding the radial nerve is advised. In contrast to the procedure used in radial external fixation for supracondylar humeral fracture treatment, two Schanz screws are always fixed in each fragment at a distance of 1.5-2 cm. The osteotomy must allow the fragment to freely move in all directions. The proximal and distal two Schanz screws are then connected with short 4 mm carbon or stainless steel rods. These two rods are connected with each other over another rod using the tub-to-tub technique. Now the preliminary correction according the clinical situation can be performed and the clamps are tightened. Anatomical axis and function are checked. If these are radiologically and clinically perfect, all clamps are definitively tightened; if the alignment or the function is not perfect, then further adjustments can be made.

POSTOPERATIVE MANAGEMENT

Due to the excellent stability, further immobilization not necessary. Immediate functional follow-up treatment performed according to pain.

RESULTS

Adequate healing is usually expected within 6 weeks. At this time the external fixator can be removed in the fracture clinic. Because the whole operation is performed in an extraarticular manner and the mobility of the elbow is not affected, deterioration of function has never been observed. Also regarding the cosmetic/anatomical situation, good results are expected because they were already achieved intraoperatively.