Arthroskopisch gesteuerte Osteosynthese der dislozierten intraartikulären distalen Radiusfraktur

Outcomes of Arthroscopic-Assisted Distal Radius Fracture Volar Plating: A Meta-Analysis

PURPOSE

The use of wrist arthroscopy to assist fixation of distal radius fractures with volar locking plates (VLPs) has been gaining popularity in recent years; however, there is no consensus on its benefits. This meta-analysis compares outcomes of arthroscopic-assisted VLP to fluoroscopic-assisted VLP in distal radius fractures through a systematic review of the published literature.

METHODS

A systematic search of publications from databases (Medline, EMBASE, Scopus, and Cochrane) was obtained from inception to May 2020. A random-effects meta-analysis was used to calculate effect sizes. Outcomes included postoperative radiographic reduction (gap, stepoff, radial inclination, volar tilt, and ulnar variance), procedural outcomes (operative time, additional soft tissue injuries and complications), and functional outcomes (range of motion; visual analog scale score; Disabilities of the Arm, Shoulder, and Hand score; Patient-Rated Wrist Evaluation score; Mayo clinic score; and grip strength).

RESULTS

Six studies, involving 280 patients, met the final inclusion criteria. The meta-analysis for postoperative stepoff was statistically significant, favoring arthroscopic-assisted VLP. In addition, there was greater identification of associated soft tissue injuries, increased wrist extension, and a longer operative duration when performing arthroscopic-assisted VLP fixation. There were no differences in other postoperative radiographic outcomes, complications, or functional outcomes.

CONCLUSIONS

The current literature suggests that arthroscopic-assisted VLP is a useful adjunct to intra-articular reduction and treatment of associated soft tissue injuries in distal radius fractures. Considerations should include operative time, costs, and the additional training required. Further studies are needed to assess functional outcomes.

TYPE OF STUDY/LEVEL OF EVIDENCE

Therapeutic II.

[Research progress in the treatment of distal radius fractures assisted by wrist arthroscopy]

OBJECTIVE

To review the research progress of wrist arthroscopy assisted treatment of distal radius fractures.

METHODS

To summarize and describe the anatomical characteristics and fracture classification of the distal radius, indications and contraindications of wrist arthroscopy-assisted treatment, surgical methods, and associated soft tissue injuries, and summarize the advantages and disadvantages of the operation through a large number of literature at home and abroad on the treatment of distal radius fractures assisted by wrist arthroscopy.

RESULTS

Wrist arthroscopy as a minimally invasive technique for the treatment of distal radius fractures, compared with traditional surgery, can accurately observe intra-articular damage and perform operations under the microscope to avoid secondary damage to blood vessels, nerve, and tendon, etc., and can achieve one-stage repair and reconstruction by repairing the ligament, trigonal fibrocartilage complex, and carpal dislocation. It has the advantages of less trauma, fast postoperative recovery, extensive indications, fewer complications, and satisfactory effectiveness.

CONCLUSION

Wrist arthroscopy has advantages that traditional X-ray film, CT, MRI, and arthrography examinations do not have. Moreover, wrist arthroscopy has achieved satisfactory effectiveness in the adjuvant treatment of intra-articular distal radius fractures.

Salvage procedure after malunited distal radius fractures and management of pain and stiffness

Indications for surgical treatment of distal radius fractures (DRF) remain controversial in the literature, especially in elderly patients. Complication rates after operatively treated DRF are low and well documented. These include malunion, degenerative osteoarthritis in the radiocarpal joint and subsequently pain and impaired hand function. If conservative treatment fails then salvage procedures are necessary. This review summarizes the therapeutic options available to treat degenerative osteoarthritis after malunited distal radius fractures, regardless of the initial operative or conservative treatment.

Complications after operatively treated distal radius fractures

In the recent years, treatment of distal radius fractures (DRF) has advanced considerably. Surgical fixation with palmar angular stable plate has gained popularity, due to a reported lower complication rate when compared to dorsal fixation. The type of trauma or injury, surgical procedure and impaired bone quality are all contributors to complications in DRF. The main aim of this review is to summarize the most common complications and possible therapeutic solutions. In addition, strategies for minimizing these complications will be discussed.

Biomechanical considerations on a CT-based treatment-oriented classification in radius fractures

A wide range of different classifications exist for distal radius fractures (DRF). Most of them are based on plane X-rays and do not give us any information on how to treat these fractures. A biomechanical understanding of the mechanical forces underlying each fracture type is important to treat each injury specifically and ensure the optimal choice for stabilization. The main cause of DRFs are forces acting on the carpus and the radius as well as the position of the wrist in relation to the radius. Reconstructing the mechanism of the injury gives insight into which structures are involved, such as ruptured ligaments, bone fragments as well as the dislocated osteoligamentous units. This article attempts to define certain key fragments, which seem crucial to reduce and stabilize each type of DRF. Once the definition is established, an ideal implant can be selected to sufficiently maintain reduction of these key fragments. Additionally, the perfect approach is selected. By applying the following principles, the surgeon may be assisted in choosing the ideal form of treatment approach and implant selection.

[Palmar radioscapholunate arthrodesis with distal scaphoidectomy]

OBJECTIVE

Radioscapholunate (RSL) arthrodesis with distal scaphoidectomy using an angular stable plate and palmar access in post-traumatic or degenerative osteoarthritis limited to the radiocarpal joint.

INDICATIONS

Osteoarthritis limited to the radiocarpal joint with intact mediocarpal joint after malunited intra-articular distal radius fractures, rheumatoid osteoarthritis, scapholunate advanced collapse (SLAC) up to stage II.

CONTRAINDICATIONS

Mediocarpal osteoarthritis, poor patient compliance, SLAC from stage III, osteitis.

SURGICAL TECHNIQUE

The palmar RSL arthrodesis is performed using the palmar approach between the flexor carpi radialis tendon and the radial artery. After releasing the pronator quadratus muscle, a longitudinal capsulotomy is performed and the radiocarpal joint is inspected. After correction of a volar or dorsal intercalated segmental instability of the lunate, the lunate is temporarily fixed to the scaphoid using a K-wire. The distal quarter of the scaphoid and the palmar rim of the distal radius is resected and the cartilage between the scaphoid, lunate and distal radius is removed. The scaphoid and lunate are temporarily fixed to the distal radius using K‑wires. Under image intensifier control the angular stable low-profile plate (e.g., volar 2.5 Trilock RSL Fusion plate [Medartis® Aptus® Basel, Switzerland]) is fixed to the distal radius in the long-leg hole. The scaphoid and lunate are fixed distally with two screws each. The carpus is pushed distally using a Codeman distractor and the cancellous bone graft is impacted. Finally, the shaft is fixed with angular stable screws.

POSTOPERATIVE MANAGEMENT

Immobilization using a plaster cast or thermoplastic short-arm orthosis for 5 weeks. After 2 weeks, the orthosis can be removed during hand therapy with active wrist and finger exercises. Normal activities permitted after 12 weeks.

RESULTS

Palmar RSL arthrodesis and distal scaphoidectomy using angular stable plate fixation shows a high union rate and pain relief while maintaining good residual mobility of the wrist.

Arthroscopic assisted treatment of distal radius fractures and concomitant injuries

Wrist arthroscopy is mainly used to assist fracture reduction and fixation and to diagnose and treat concomitant injuries mainly to the scapholunate (SL), lunotriquetral (LT) ligament and the triangular fibrocartilage complex (TFCC). Arthroscopy is beneficial in improving anatomical reduction of fracture steps and gaps in intra-articular distal radius fractures (DRFs). Yet, the literature that the functional outcome correlates with the use of arthroscopy, is limited. Non-surgical treatment and immobilization is recommended for Geissler grade I-III Sl-ligament injuries, while open reduction, ligament suture and/or K-wire pinning is mandatory for complete ligament tears according to Geissler grade IV. This manuscript describes the current literature and gives insight into the authors' opinions and practice.

Donor site complications following anterior iliac crest bone graft for treatment of distal radius fractures

INTRODUCTION

In distal radius fractures with metaphyseal comminution, bone grafting or the use of a bone substitute may be necessary. Harvesting autologous iliac crest bone graft for other orthopedic procedures has complications. The aim of this study was to evaluate the complication rate after harvesting a small amount of bone as used for the treatment of radius fractures.

PATIENTS AND METHODS

Patients treated in a single level I trauma center with surgical treatment for distal radius fracture with iliac crest bone graft between January 2008 and December 2012 were included in this retrospective study. Patients' records were evaluated and clinical evaluation was performed at follow-up.

RESULTS

42 patients (20 females, 22 males, mean age 56.3 ± 15.9 years) were included in this study. Follow-up was mean 6.3 ± 1.2 years. Only minor complications such as hematoma could be identified; in one patient, revision surgery for bleeding was performed. No nerve injuries, long-term pain, fractures, infections or wound healing disturbances could be seen. The use of a drain of hemostyptics, the type of wound closure or pattern of harvested bone did not influence complication rate.

CONCLUSION

This study shows that harvesting a small amount of iliac crest bone graft for the treatment of distal radius fractures is a safe procedure with a very low complication rate.

Three-dimensional kinematics of the flexor pollicis longus tendon in relation to the position of the FPL plate and distal radius width

INTRODUCTION

The standard therapy of intra-articular and extra-articular distal radius fractures consists of open reduction and stabilization using palmar osteosynthesis with an angularly stable plate. The integrity of the flexor pollicis longus tendon (FPLT) may be mechanically affected by the plate, with rupture rates between 1 and 12% reported in the literature, occurring during a postoperative time period from 4 to 120 months. The aim of this study was to investigate the position of the tendon in relation to the distal edge of the plate using high-resolution ultrasonic imaging.

MATERIALS AND METHODS

Nineteen patients undergoing osteosynthesis for distal radius fracture in 2015 with the Medartis^® APTUS^® FPL plate were included in this study. Of these, seven dropped out for various reasons. Therefore,  twelve patients with a median age of 52 years (range 24-82 years) were included in the final analysis. High-frequency ultrasound was performed within a median of 28 (range 10-52) weeks by an experienced radiology specialist to locate the FPLT position in two separate wrist positions: (1) wrist held in 0° position and fingers extended and (2) wrist held in 45° of dorsal extension and actively flexed fingers II to V (functional position). For analysis, we used the axial ultrasound videos. Postoperative X-rays and CT scans were included for the analysis, especially the soft-tissue CT scan window for the exact localization of the FPLT.  Dynamic ultrasound scanning was used to localize the FPLT in relation to the plate in 0° and functional position of the hand. Using CT scanning, the position of the plate relative to the bone was determined. In this way, we were able to correlate the functional FPLT position with the osseous structures of the distal radius.

RESULTS

In all cases, the FPLT was positioned closer to the volar distal edge of the FPL plate in functional position than in 0° position. In four cases, the FPLT did not touch the plate at all and was shown to shift diagonally from radio-volar in ulno-dorsal direction during wrist movement from 0° to functional position, similarly to the sliding of the tendon in the assumed physiological motion sequence. In these cases, in the functional position the center of the FPLT was positioned slightly ulnarly of the center of the distal radius (i.e., less than 50% of the distal radius width measured from the radial border of DRUJ), and positioned more ulnarly than in all other cases (i.e., in which the FPLT came into contact with the plate). In the remaining two-thirds of the cases (eight patients), the FPLT touched the plate during wrist movement from 0° to functional position, shifted in dorsal direction and slid into the plate indentation, irrespective of whether the tendon entered the indentation from the radial or the ulnar side, and independent of the ulnoradial position of the plate. No signs of tendinopathy of the FPLT were found in any of the cases.

CONCLUSION

The results show that the indentation of the Medartis^® APTUS^® FPL plate reduces the tendon-plate contact and ideally even prevents it entirely. In particular, ulnar positioning of the plate lowers the risk of tendon-plate contact. If the FPLT touches the plate, the tendon pulls into the plate indentation, thus lowering the contact. Consequently, the Soong criteria are not applicable when a FPL plate is used.

Early complications and radiological outcome after distal radius fractures stabilized by volar angular stable locking plate

INTRODUCTION

Distal radius fractures (DRF) are the most common fractures of the upper extremities. The incidence is expected to continue rising in the next years due to the increased life expectancy. Palmar locking plate stabilizing has since become the standard treatment for dorsally displaced DRF with a complication rate of 8-39% reported in the literature. Main aim of this study was to investigate the incidence of complications after DRF stabilization using palmar angular stable locking plate.

METHODS

A retrospective medical records review conducted from January 2013 to December 2016 included a total of 392 patients with DRF, that were stabilized using palmar angular stable locking plate and showed a minimum follow-up of 3 months. The group comprised 259 female and 133 male patients with a mean follow-up interval of 11 months (range 3-52 months). All recorded complications were documented. Range of motion (ROM) in extension, flexion, supination, pronation, radial- and ulnar deviation of the last follow-up was noted. Age was divided into younger than 65 years (< 65 years) and older than 65 years (≥ 65 years). The primary, immediate postoperative and final checkup radiographs were scrutinized for alignment and intra-articular step-off.

RESULTS

A total of 51 (13%) early and 17 late (4%) complications were recorded in 392 patients. The most common complications included carpal tunnel syndrome (3%), complex regional pain syndrome (3%) and loss of reduction (2%). Of the 68 complications, only 25 (6%) were directly related to the plate. 73% of all complications occurred in AO type C fractures. Patients without complications showed a significantly better ROM in extension, flexion, pronation and supination than patients with complications. No significant differences in incidence of complications, ROM or loss of reduction could be found between patients over and under 65 years of age. Gender and type of immobilization showed no significant influence on the complication rate.

CONCLUSIONS

Stabilization of DRF by palmar angular stable locking plate is a safe form of treatment. In the majority of the cases a good clinical and radiological outcome with no complications was documented. Gender and type of immobilization had no impact on the complication rate and an age over 65 years is not associated with an increased risk for complications or restricted ROM.

Significance of Scapholunate Gap Width as Measured by Probe from Midcarpal

Background  Geissler's classification is widely accepted in arthroscopic diagnostics of scapholunate (SL) ligament injury. Thereby, probe insertion into the SL gap from the midcarpal would indicate treatment necessity in patients with SL tear as seen from radiocarpal view. Purpose  In this review, the SL gap width, examined by the probe from midcarpal, was arthroscopically assessed in patients with intact SL ligaments, who were treated for ulnar impaction syndrome. The review examined how often lax SL joints can be found in patients with no complaints with respect to the SL ligaments and in which the SL ligaments were proven to be intact from radiocarpal view. We suspected that probe insertion, as an indicator for a lax joint, does not affect the outcome in ulnar impaction treatment. Patients and Methods  A total of 32 patients with clinically diagnosed ulnar impaction syndrome were arthroscopically treated by central resection and debridement of the triangular fibrocartilage; 8 patients underwent concurrent ulnar shortening, and 4 of them finally hardware removal. All patients were examined preoperatively as well as after 3, 6, and 12 months following arthroscopy, respectively, after ulnar shortening or hardware removal. Results  In 14 patients, the probe could not, in 18 patients, the probe could be inserted into the SL gap. There was neither any significant difference in the improvement of pain, grip strength, Krimmer, or DASH score, nor for any of the radiographic angles between the two groups. Conclusion  Laxity of the SL ligament allows the probe to be inserted into the SL gap from midcarpal in some patients. This finding, therefore, does not necessarily imply the necessity of treatment when there is partial rupture seen from radiocarpal view. Level of Evidence  Level III, case-control study.

[Distal radius fracture of the adult : Diagnostics and therapy]

Fractures of the distal radius are very common. The majority of patients are elderly females. High impact trauma are often responsible for fractures in young men. Clinical and radiological diagnostics, including computer-assisted tomography (CAT) scan, are generally sufficient. The indication for conservative treatment is still recommended for specific fracture patterns. Application of palmar locking plates after open reduction proved to be efficacious for the majority of fracture patterns. Furthermore, precise detection and treatment of concomitant lesions are mandatory in order to prevent complications.

Spontaneous radioscapholunate fusion after septic arthritis of the wrist: a case report

Bacterial septic arthritis rarely occurs in the upper extremities. Yet, early diagnosis and treatment is important, as a delay in diagnosis results in pain, impaired hand function, and degenerative joint disease. Radioscapholunate (RSL) arthrodesis is a well-established procedure for treating inflammatory arthritis and osteoarthritis (primary or posttraumatic), primarily to achieve pain relief. The wrist deformity correction offers an alternative option to total wrist arthrodesis. Indications for a RSL arthrodesis are osteoarthritis of the radiolunate and radioscaphoid joint with a concomitant intact midcarpal joint. We present a case study of spontaneous RSL fusion post wrist infection caused by a dog bite.