Palmare winkelstabile Plattenosteosynthese der instabilen distalen Radiusfraktur

[Diagnostics and classification of distal radius fractures]

Fractures of the distal radius show a wide spectrum of different fracture patterns. Although standard X‑ray images are sufficient for extra-articular fractures, the exact analysis of intra-articular fractures requires the use of computed tomography (CT) with coronal, sagittal and axial sectional images. The classification is based on the Working Group for Osteosynthesis Questions (AO) criteria. The treatment strategy can be more precisely defined by a CT-based classification. Special attention must be paid to the presence of the key corners, as they have a high risk for primary or secondary dislocation if they not adequately stabilized.

Complications after operatively treated distal radius fractures

In the recent years, treatment of distal radius fractures (DRF) has advanced considerably. Surgical fixation with palmar angular stable plate has gained popularity, due to a reported lower complication rate when compared to dorsal fixation. The type of trauma or injury, surgical procedure and impaired bone quality are all contributors to complications in DRF. The main aim of this review is to summarize the most common complications and possible therapeutic solutions. In addition, strategies for minimizing these complications will be discussed.

Biomechanical considerations on a CT-based treatment-oriented classification in radius fractures

A wide range of different classifications exist for distal radius fractures (DRF). Most of them are based on plane X-rays and do not give us any information on how to treat these fractures. A biomechanical understanding of the mechanical forces underlying each fracture type is important to treat each injury specifically and ensure the optimal choice for stabilization. The main cause of DRFs are forces acting on the carpus and the radius as well as the position of the wrist in relation to the radius. Reconstructing the mechanism of the injury gives insight into which structures are involved, such as ruptured ligaments, bone fragments as well as the dislocated osteoligamentous units. This article attempts to define certain key fragments, which seem crucial to reduce and stabilize each type of DRF. Once the definition is established, an ideal implant can be selected to sufficiently maintain reduction of these key fragments. Additionally, the perfect approach is selected. By applying the following principles, the surgeon may be assisted in choosing the ideal form of treatment approach and implant selection.

Functional Outcome of Fixation of Complex Intra-articular Distal Radius Fractures with a Variable-Angle Distal Radius Volar Rim Plate

Aim To evaluate the outcome of these complex fractures using a volar approach and the DePuy Synthes variable-angle 2.4-mm distal radius rim plate. This plate is precontoured to the volar rim for placement distal to the watershed line allowing purchase of the rim fragment of the lunate facet. Its low profile and smooth edges are designed to minimize flexor tendon irritation. Method We report on a consecutive series of far distal AO-23B3 and AO-23C3 fractures treated using this plate in a tertiary hand center between November 2011 and May 2014. Range of motion, grip strength, and complications were assessed at the final clinical review. Disabilities of the arm, shoulder, and hand (DASH) and patient evaluation measure (PEM) scores were assessed at 12 months after surgery. Results Twenty-six patients were included in this review. Six patients were lost to follow-up at 3 months. This plate was used in isolation in 17 cases, and in combination with a dorsal plate, in cases of dorsal instability after volar plating, in 10 patients. DASH and PEM scores 1 year after surgery were 17.6 and 27%, respectively. Visual analog scores for patient treatment satisfaction and severity of pain showed good satisfaction with treatment and mild intermittent pain on activity. Postoperative range of motion was variable and grip strength was of 71% of the uninjured contralateral side. There were no cases of flexor or extensor tendon rupture. Tendon irritation was noted in two patients. Removal of metal was performed in four patients. Loss of reduction occurred in one case and neurologic complications in two cases. Conclusion This implant is specifically designed for the management of far distal complex intra-articular fractures of the distal radius. Despite the complexity of these fracture patterns and the challenge they pose to accurate reduction and stable fixation, outcomes were satisfactory in this small series. There were no cases of tendon rupture. Removal of metal is not necessary in all cases, but prompt removal should be performed in cases of tendon irritation in view of the risk of tendon rupture.

Open Reduction and Palmar Plate-Osteosynthesis in Combination with a Nanocrystalline Hydroxyapatite Spacer in the Treatment of Comminuted Fractures of the Distal Radius

In a prospective study, we used the nanocrystalline hydroxyapatite paste Ostim (Osartis, Obernburg, Germany) in combination with a palmar plate to treat comminuted radius fractures with a metaphyseal and articular component in order to examine the clinical use of Ostim as a bone substitute. Twenty-one patients with 22 radius fractures of AO types C2 and C3 were included in the study. The measurements, taken 10.2±1.3 months after the initial treatment, revealed a dorsopalmar tilt of 8.8±3.7°, a radioulnar inclination of 18.8±2.8° and an ulnar variance of 0.8±1.8 mm. According to the Gartland and Werley evaluation, eight of the treated fractures attained an excellent, 11 a good and the remaining three a fair result. The study demonstrates that Ostim, in combination with angularly stable osteosynthesis, can be used as an acceptable bone substitute for the treatment of type C2 and C3 radial fractures.

Plate fixation of distal radius fracture and related complications

INTRODUCTION

Distal radius fractures are common. In cases where surgical treatment is needed, volar plates can be used to obtain stable, long-lasting fixation. The design of these plates has continually improved over the years, but complications remain a problem.

PURPOSE

The goal of this study was to evaluate the types of complications that occur with different types of volar plates with a view towards preventing them.

MATERIALS AND METHODS

The emergency department at our hospital saw 524 patients with distal radius fractures between 2006 and 2008. Some of these were treated surgically with a volar plate. All of the post-operative complications were documented.

RESULTS

With a minimum follow-up of 6 months, 152 patients who had undergone plate fixation were reviewed: 31 had received plates with non-locking screws or uniaxial locking screws and 121 had received plates with polyaxial locking screws. The complication rate was similar in these two groups (16.1 and 16.5%, respectively). The main complications were tendon ruptures and problems related to the plate itself.

DISCUSSION

Plate-related complications have been described in published studies, but few of these studies link them to the plate design or surgical technique. Manufacturers must continue to refine these plates to minimise their thickness while keeping their strength. Surgeons must be sure to use a highly exacting technique.

Fixation of distal radius fractures in adults: a review

In patients for whom function is a priority, anatomic reduction and stable fixation are prerequisites for good outcomes. Several therapeutic options exist, including orthopedic treatment and internal fixation with pins (intra- and extrafocal), external fixation which may or may not bridge the wrist, and different internal fixation techniques with dorsal or palmar plates using or not, locking screws. Arthroscopy may be necessary in case of articular fracture. In the presence of significant metaphyseal bone defects, filling of the comminution with phosphocalcic cements provides better graft stability. The level of evidence is too low to allow recommending one type of fixation for one type of fracture; and different fixation options to achieve stable reduction exist, each with its own specific complications. With the new generations of palmar plate, secondary displacement is becoming a thing of the past.

[Early results after palmar multi-axial plate osteosynthesis for treatment of distal radius fractures]

In a prospective study a total of 49 fractures in 47 patients were treated with open reduction and palmar plate osteosynthesis. The results were evaluated radiologically, clinically and with the disability of arm-shoulder-hand (DASH) score. The emphasis was on early postoperative results. The patients consisted of 11 men and 36 women aged 21–85 years old. Very good or good results were achieved in 79.6% of the patients, a fair result in 16.3% and a poor result in 4.1% according to the Lidström criteria. In 65.9% of cases very good or good functional results were achieved, in 22.7% fair and in 11.4% only poor results. The DASH score showed high patient satisfaction in 70.2%, moderate satisfaction in 25.5% and only little satisfaction in 4.3% of patients. Complications occurred in 14.3% of patients and the average duration of sick leave was 45.8 days. Open reduction of distal radius fractures using palmar plates with multi-axial angular stability shows good radiological and functional results even shortly after the operation.

Unstable distal radius fractures in the elderly patient--volar fixed-angle plate osteosynthesis prevents secondary loss of reduction

BACKGROUND

Because of demographic changes in industrialized countries, signifying a growing population of the aged and a markedly increased life expectancy, the incidence of the distal radius fracture is expected to increase by a further 50% until the year 2030. Osteoporosis characterizes the radius fracture in elderly patients. Primarily weakening metaphyseal bone, osteoporosis renders simple fractures unstable and makes distal bone fixation a challenge. The introduction of fixed-angle plate systems for extension fractures of the radius was evaluated in a prospective study performed at our hospital after selection and acquisition of a new plating system. The focus of our interest was whether a secondary loss of reduction can be prevented by this plating system in the elderly patient.

METHODS

We reviewed 58 patients aged 75 years or older treated for unstable distal radius fractures using a volar fixed-angle plate. Postoperative management included immediate finger motion, early functional use of the hand, wrist splint used for 4 weeks, and physiotherapy. At the time of follow-up, after a mean period of 13 months (range, 12-15 months), standard radiographic and clinical fracture parameters were measured and final functional results were assessed.

RESULTS

Bone healing had occurred in all patients at the time of follow-up. On X-rays taken at the time of follow-up, 53 patients (91%) had no radial shortening, 5 patients (9%) had a mean radial shortening occurred during follow-up of only 1.3 mm (range, 1-2 mm) compared with the contralateral side. Comparing the first postoperative X-rays with those taken at final evaluation showed no measurable loss of reduction in the volar tilt or radial inclination. Castaing's score yielded a perfect outcome in 25 cases, a good outcome in 30 cases, and an adequate outcome in 3 cases. On an average, the range of motion was reduced by 19% during extension/flexion, by 13% during radial/ulnar deviation, and by 9% in pronation/supination compared with the contralateral side. Grip strength was 55% higher than that of the contralateral side. Eleven patients (19%) reported pain at rest with a mean Visual Analog Pain Scale score of 3.1 (range, 1-6), whereas 30 patients (52%) had pain on load-bearing with a mean Visual Analog Pain Scale score of 3.4 (range, 1-8). The mean disabilities of the arm, shoulder, and hand (DASH) score (Jester A, Harth A, Germann G. J Hand Surg Am. 2005;30:1074.e1-1074.e10) was 28 points. A carpal tunnel syndrome with abnormal nerve conduction velocity was diagnosed in three patients, a rupture of the flexor pollicis longus tendon was seen in one patient.

CONCLUSION

Fixed-angle plate osteosynthesis at the distal radius in the elderly patient signifies a significant improvement in the treatment of distal radial fractures in terms of restoration of the shape and function of the wrist associated with a low complication rate. This technique with its simple palmar access, allows exact anatomic reduction of the fracture, allows early return to function, and minimizes morbidity in the elderly patient. Secondary correction loss can be prevented by this procedure.

[Biomechanical study of four palmar locking plates and one non-locking palmar plate for distal radius fractures: stiffness and load to failure tests in a cadaver model]

Five different palmar fixation plate designs were compared in a distal radial osteotomy cadaver model with regard to their biomechanical properties. A metaphyseal osteotomy gap of 1 cm was performed and the osteosynthesis was plated according to the manufacturer's instructions. Axial load was applied to the construct by a pneumatic material testing machine. Five implant groups with eight cadavers each were tested concerning stiffness. None of the constructs developed deformity and movement of the fracture gap larger than 2 mm with a load of 100 N. Increasing the load to 250 N revealed significant differences in stiffness and failure load between the different plates. The mean stiffness under axial load (mean+/-standard deviation) was 356.4+/- 138.6 N/mm for the radius correction plate without lateral tongue, 299.7+/-86.3 N/mm for the radius correction plate with lateral tongue, 132.8+/-41.5 N/mm for the distal volar radius plate, 112.5+/-40.2 N/mm for the 3.5 mm titanium locking compression plate and 91.9+/-29.2 N/mm for the standard stainless steel 3.5 mm T-Plate. The non-angular stable implant (STP plate) had the lowest stiffness. Unexpectedly, there were differences over 100% concerning the stiffness between the at first glance nearly similar angular stable implants. Additionally, a review of the literature concerning biomechanical investigations of the distal radial fracture was performed.

[Combined dorsal and palmar plate osteosynthesis for intraarticular distal radius fractures]

BACKGROUND

Complex comminuted intraarticular fractures of the distal radius require anatomic restoration. In rare cases, this aim can only be achieved by a combined dorsal and volar plate fixation despite increasing experience with volar locking compression implants. This retrospective quality control study investigated functional, radiological and subjective outcomes of patients treated with this technique.

METHODS

Between March 1999 and January 2003, 30 out of 360 patients who were operated on for an unstable distal radius fracture with complex C2/C3 type distal radius fractures at the Division of Trauma Surgery of the University Hospital Zurich, had been treated with a combined dorso-palmar plate fixation (dorsal two 1/4 tubular plates, volar 3.5 mm T-plate) and were included in this study (9 female, 21 male, mean age 52 years). Of the 30 patients 25 could be evaluated at an average of 29 months after injury.

RESULTS

Anatomic reconstruction could not be achieved in all cases, 56% showed mild and 28% explicit signs of arthrosis. Flexion reached 66% and extension 75% of the contralateral wrist, whereas pronation reached 98% and supination 91%, respectively. Grip strength achieved 75% of that of the contralateral side and 10 patients (40%) developed a complex regional pain syndrome (CRPS). Return to work was possible 120 days after the injury.

CONCLUSION

With the dorso-palmar plate fixation joint reconstruction in complex intraarticular distal radius fractures can be achieved with a satisfactory subjective, functional, and radiologic result, although additional soft tissue injury was caused by the bilateral approach. The patient has to be informed of the high rate of CRPS and the long period of disability.

Volar fixed-angle plate osteosynthesis of unstable distal radius fractures: 12 months results

BACKGROUND

With an incidence of about 2-4 per 1,000 residents per year, the distal radial fracture is the most common fracture in the human skeleton. The introduction of fixed-angle plate systems for extension fractures at the radius was evaluated in a prospective study performed at our hospital after selection and acquisition of a new system. The focus of our interest was whether a secondary loss of reduction can be avoided by this plating system.

METHODS

We reviewed 80 patients treated for unstable distal radius fractures using a volar fixed-angle plate. Postoperative management included immediate finger motion, early functional use of the hand, a wrist splint used for 4 weeks and physiotherapy. Standard radiographic and clinical fracture parameters after 12 months (range 12-14 months) were measured and final functional results where assessed.

RESULTS

Bone healing had occurred in all patients at the time of follow-up after 1 year. On X-rays taken at the time of follow-up 60 patients (75%) had no radial shortening, 20 patients (25%) had a mean radial shortening of only 1.8 mm (range 1-3 mm) compared to the contralateral side. The radial tilt was on average 22 degrees (range 14 degrees-36 degrees); the volar tilt was on average 6 degrees (range 0 degrees-18 degrees). Comparing the first postoperative X-rays with those taken at final evaluation showed no measureable loss of reduction in the volar or radial tilt. Castaing's score, which includes the radiographic results, yielded a perfect outcome in 30 cases, a good outcome in 49 cases and an adequate outcome in one case. The range of motion was on average reduced by 21% during extension/flexion, by 11% during radial/ulnar deviation and by 7% in pronation and supination compared to the contralateral side. Grip strength was 65% that of the contralateral side. The mean DASH score was 25 points.

CONCLUSION

Fixed-angle plate osteosynthesis at the distal radius signifies a significant improvement in the treatment of distal radial fractures in terms of restoration of the shape and function of the wrist. The technically simple palmar access, with a low rate of complications, allows exact anatomical reduction of the fracture. The multidirectional fixed-angle system we used provides solid support for the joint surface even in osteoporotic bone and allows simple subchondral placement of screws with sustained retention of the outcome of reduction. Secondary correction loss can be avoided by this procedure. Early mobilisation can be achieved and is recommended.

Avaliação do posicionamento de parafusos subcondrais utilizados em placas para tratamento das fraturas distais do rádio

As fraturas distais do rádio são as mais freqüentes do membro superior. São classificadas em estáveis e instáveis. As instáveis requerem tratamento cirúrgico. Não está definido na literatura qual o melhor método de fixação, mas existe atualmente uma tendência à utilização das placas com parafusos bloqueados. Um dos aspectos técnicos importantes é o posicionamento dos parafusos distais junto ao osso subcondral, proporcionando suporte mais adequado. A avaliação da localização desses parafusos é feita com radioscopia e radiografias, mas freqüentemente existem dúvidas quanto ao correto posicionamento. Os objetivos deste estudo são: avaliar se é possível determinar com precisão por meio de radiografias, a localização dos parafusos distais no rádio e se a experiência do avaliadorinfluencia nesta análise. Foram utilizados punhos de cadáveres. Cada rádio recebeu três parafusos junto à superfície articular distal. Por meio de incidências radiográficas clássicas e anguladas, médicos especialistas e não-especialistas em cirurgia da mão avaliaram a posição de cada parafuso, se intra ou extra-articular. Os índices de acerto foram submetidos à análise estatística.As radiografias provaram ainda ser um bom método de avaliação, não havendo melhora da precisão na localização dos parafusos com as incidências anguladas. A experiência profissional do avaliador não teve influência nos resultados.

Ist die Behandlung der instabilen distalen Radiusfraktur beim älteren Menschen mittels Fixateur externe nicht mehr indiziert?

BACKGROUND

In recent years there has been an increasingly marked shift in the operative treatment of unstable fractures of the distal radius. The introduction of locking compression plates has made it possible to extend the indications for palmar stabilisation according to the principles of internal fixation to extension fractures even in osteoporotic bone, and since then the new design has been used more and more widely. First clinical results show very good and good clinical and radiological outcomes in over 80% of cases after locking compression plate osteosynthesis. All this raises the question of whether external fixation is no longer indicated for distal radius fractures in the elderly, or is now no more than a second-line treatment.

PATIENTS AND METHODS

Within a 5-year period, 67 patients over 65 years of age were identified among 220 who had had unstable fractures of the distal radius in our hospital with external fixation. The average follow-up period (clinical and radiological examinations) was 37 months. We devoted particular attention to the analysis of complications and problems during the treatment.

RESULTS

Complete bone healing was observed in all patients treated with external fixation. In most cases, complications were minor pin-track infections (10%). The radiological follow-up examination revealed radial shortening by an average of 2 mm and an average radial shift of 0.2 mm. The joint angle was 2.5 degrees with lateral irradiation and 18 degrees with dorso-palmar irradiation. According to the Gartland and Werley score, the functional, radiological and subjective outcome was excellent or good in 87% of these patients.

CONCLUSIONS

Overall, internal fixation with angular fixed plates has definite benefits. The medium- and long-term follow-up and functional outcome still show no benefits over external fixation, however. External fixation is a genuine option, even if as second-line treatment.

Beugesehnenrupturen nach palmarer Osteosynthese mit einer multidirektional winkelstabilen Platte

Six months after the internal fixation of a distal intra-articular fracture of the radius with a fixed-angle plate (APTUS by Medartis), a 79 year old woman sustained chronic tears in flexor digitorum profundus tendons II, III and the flexor pollicis longus tendon.

Ostéosynthèse des fractures du radius distal par plaque à vis bloquée

PURPOSE OF THE STUDY

Fractures of the distal radius are common. No one implant has demonstrated superior efficacy in terms of maintaining the reduction over time. We report our experience with plate fixation using a locking screw.

MATERIAL AND METHODS

Between September 2003 and June 2004, 67 displaced fractures of the distal radius were treated by plate fixation using the LCP-DRP 2.4 (Synthès). Three different plates (anterior, posterior, and external) were used. The patients wore a removable anatomic brace for three weeks. Self-controlled rehabilitation exercises began directly after surgery with mobilization of the digital chains. The Fernandez, Castaing and AO classifications were noted. Ulnar variance, anteversion of the radial glenoid, radial slope and the alpha angle were measured intraoperatively and at last follow-up to assess maintenance of reduction over time. The DASH test and Green and O'Brien and PRWE scores were used to assess clinical outcome.

RESULTS

Mean follow-up was eight months. Mean age was 55.8 years. Eight patients were lost to follow-up. The analysis included 59 patients who could respond to the questionnaires. Bone healing was achieved at six weeks. There were no cases of secondary displacement nor loss of reduction. The Green and O'Brien score was good or very good for 85%. The mean DASH was 20.6 and the mean PRWE 32.8.

DISCUSSION

The appropriate fixation method for distal fractures of the radius remains a controversial issue, leading to a variety of materials and fixation methods. Primary stability achieved with the locking screw in a plate enables early mobilization associated with more rapid recovery of function. The absence of secondary displacement, irrespective of the quality of the underlying bone enabled us to achieve equivalent results in young patients and older patients with osteoporotic bone. This study also confirmed the preference for the anterior approach, irrespective of the direction of the displacement. To date, no other material has enabled equivalent results. This is a major achievement in terms of fixation stability.

Welche Vorteile bietet die volare Plattenosteosynthese gegenüber der Kirschner-Drahtstabilisierung bei distalen Radiusextensionsfrakturen des alten Menschen?

PURPOSE

The purpose of this retrospective study was to compare the outcome of open reduction and internal fixation (ORIF) followed immediately by physiotherapy and of percutaneous K-wire-fixation and casting for unstable distal radius fractures in elderly patients, considering the results both in general, for all such fractures, and selectively for A3 and C2 fractures.

METHODS

Follow-up examinations were performed 26 (18-48) months after surgery in 43 patients (median age 67 (60-83) years) treated with K-wire fixation and 9 (5-17) months after surgery in 46 patients (median age 76 (60-90) years) treated with ORIF, and the outcome of each was recorded as Disabilities of the Arm, Shoulder and Hand (DASH), Gartland-Werley and Castaing scores; the radiological loss of correction was also assessed. Statistical analysis was performed first without reference to the specific type of fracture for the K-wire- and the total ORIF -groups, and then selectively for A3 and C2 -fractures only; in the second analysis the patients were divided into three groups: KD, ORIF with and ORIF without angular stability.

RESULTS

The Garland-Werley and Castaing scores do not indicate any significant difference between the procedures specified. According to the Garland-Werley score 37 patients (86%) treated by K-wire fixation and 39 (85%) treated by ORIF achieved "excellent" and "good" results; according to the Castaing score there were 33 (77%) "good" results after K-wire fixation and 34 (74%) good results after ORIF. The radiological loss of correction (K-wire fixation/ORIF) as measured by the radial inclination (median 2/2.5 degrees), the palmar tilt (median 3/5 degrees) and the radial shortening (median 1/1 degrees mm) do not differ significantly. Suboptimal radiological results do not always correlate with results that are only "fair" or "poor". The non-fracture-specific DASH score suggests a higher degree of patient satisfaction after K-wire fixation (7 [0-87] points) than after ORIF (17 [0-82] points), which is not confirmed by fracture-specific evaluation. There is a significantly earlier return to the "activities of daily living" (4 as against 8 weeks) after ORIF.

CONCLUSION

All the treatments compared are suitable for the treatment of A3 and C2 fractures. The important advantages of ORIF are the early functional physiotherapy without casting and without obligatory second surgery and the earlier return to "activities of daily living", which are all of decisive importance for older patients, who are the ones most frequently affected.