[Results after Judet radial head prosthesis for non-reconstructable radial head fractures]

A hybrid technique combining intramedullary pinning with extramedullary plate fixation in unstable and comminuted radial head fractures following on-table reconstruction

Background

Management of comminuted radial fractures remains controversial. Currently, the emergence of on-table reconstruction technique has made fixation in comminuted radial head fractures more viable. However, the present study reported an intro-operative unstable displacement from the reconstructed radial head to the neck during plate fixation, characterized by a poor radiocapitellar contact and incongruity between the radial head and neck. A hybrid technique combining with intramedullary pining was performed in our study to restore the normal alignment and maintain the stability of fixation. Therefore, the purpose of this article aimed to prove the feasibility of unstable comminuted radial head fractures treated with the extramedullary plate and intramedullary pinning fixation using titanium elastic nails.

Methods

The clinical, functional and radiographic outcomes of the groups were compared during follow-up. The radiographic examination was conducted to evaluate the status of bone union, heterotopic ossification and post-traumatic arthritis. The functional assessment was performed to evaluate clinical effects, which included measurements of range of motion (ROM) in the elbow, Visual Analog Scale (VAS) score, Elbow Self-Assessment score (ESAS), Mayo Elbow Performance score (MEPS), and Disabilities of the Arm, Shoulder, and Hand (DASH)Outcome Measure score.

Results

Thirteen patients with unstable fractures were participated with an average follow-up of (38.6 ± 4.5) months for the experimental group and (32.0 ± 6.3) months for the control group, respectively. The functional outcomes in the experimental group, including MEPS and DASH, were significantly superior to the control group. However, no significant difference was observed in the elbow ROM and VAS score between two groups. In the last follow-up, one patient with post-traumatic arthritis rated as grades 1 and two with heterotopic ossifications were observed in the experimental group. In the control group, degenerative changes were observed in three cases (grade 1 in two cases and grade 2 in one case) and heterotopic ossifications rated as grade I were found in two patients.

Conclusion

Collectively, intramedullary pinning with extramedullary plate fixation is feasible in unstable comminuted radial head fractures, which can be considered as a remedial surgery for on-table reconstruction technique.

Options and limits of angle stable plates in the treatment of comminuted radial head fractures

Objective

New angle-stable plates provide more stability and better anatomical fit than previous plates.

Methods

22 patients treated with an angle-stable plate were included. Postoperative the outcomes were evaluated according to the scoring systems of Morrey, Radin and Riseborough.

Results

3 patients received a score of excellent, 14 good, and 5 satisfactory. We detected 3 cases of implant failure and 2 cases of postoperative neurological damage. 3 patientes received a radial head necrosis.

Conclusions

Our results show that the angle-stable radial head locking plate can only be used in limited cases in the treatment of multi-fragment radial head fractures.

Ulnar nerve entrapment complicating radial head excision

•

The cubital tunnel syndrome can be caused by iatrogenic elbow valgus after radial head excision.

•

The radial head excision is a good procedure when indicated but must be followed by radial head replacement.

•

A neurological examination should be systematically controlled for severe trauma to the elbow.

Introduction

Several mechanisms are involved in ischemia or mechanical compression of ulnar nerve at the elbow.

Presentation of case

We hereby present the case of a road accident victim, who received a radial head excision for an isolated fracture of the radial head and complicated by onset of cubital tunnel syndrome. This outcome could be the consequence of an iatrogenic valgus of the elbow due to excision of the radial head. Hitherto the surgical treatment of choice it is gradually been abandoned due to development of radial head implant arthroplasty. However, this management option is still being performed in some rural centers with low resources.

Discussion

The radial head plays an important role in the stability of the elbow and his iatrogenic deformity can be complicated by cubital tunnel syndrome.

Conclusion

An ulnar nerve release was performed with favorable outcome.

Using an anatomically preshaped low-profile locking plate system leads to reliable results in comminuted radial head fractures

INTRODUCTION

For comminuted and displaced fractures of the radial head open reduction and internal fixation (ORIF) is recommended nowadays as the treatment of choice. Due to the development of locking plates the possibilities of ORIF in complex fracture types were extended. The purpose of this retrospective survey therefore was to review the preliminary subjective and objective results in patients treated by anatomically preshaped locked plating. A reliable fracture healing for these recently introduced plating devices was hypothesized.

MATERIALS AND METHODS

Subjective and objective criteria included patient's satisfaction, pain rating on a visual analogue scale (VAS) and active range of motion (ROM) compared to the contralateral armside. Functional scoring included the Morrey elbow performance score (MEPS), the QuickDASH and the elbow self-assessment score (ESAS). Furthermore, follow-up radiographs were reviewed.

RESULTS

Between 2011 and 2014 a total of 24 patients were managed with ORIF using anatomically preshaped low-profile locking plates. All patients had suffered from comminuted radial head fractures (type III-IV according to Mason classification). Twenty of 24 patients returned for follow-up examination after a mean of 30 months (range 18-53 months). Patients' satisfaction was rated as highly satisfied in 17 cases and satisfied in 3 cases. An unrestricted ROM for extension-flexion arc and pronation-supination arc was rated in 10 cases. Minor ROM deficiencies with a 5° limited extension compared to the contralateral side was evaluated in 6 cases. Only four patients were rated with and extension and supination deficiency of 10°, one of whom with an additional pronation deficiency of 10°. The calculated MEPS was Ø 98 ± 4 (range 85-100), and the QuickDASH was Ø 3 ± 6 (range 0-21). The ESAS was completed by 18 patients with a mean of Ø 96.54 ± 2.95 (range 94-100) indicating a non-restricted elbow function.

CONCLUSIONS

The treatment of comminuted radial head fractures using anatomically preshaped locking radial head plates represents a reliable and safe surgical approach, leading to good to excellent functional results. Being aware of the importance of the radial head for elbow stability, open reduction and internal fixation should be preferred prior to radial head resection or replacement in complex radial head fractures. Further trials with a higher number of patients are needed to confirm the advantages of preshaped radial head plates.

Rare implant-specific complications of the MoPyC radial head prosthesis

BACKGROUND

According to currently available data, the clinical short-term results of the MoPyC radial head prosthesis (Bioprofile, Tornier, Montbonnot-Saint-Martin, France) seem favorable. However, we have encountered several implant-specific complications in recent years. Hence, this case series reports rare complications after radial head arthroplasty with the MoPyC prosthesis to make surgeons aware of their existence and to provide information about the underlying cause and possible salvage strategies.

METHODS

A retrospective chart review from 2011 to 2016 was conducted to identify all adult patients with a minimum 2-year follow-up who underwent or were referred after radial head arthroplasty with the MoPyC radial head prosthesis and experienced implant-related complications.

RESULTS

Five patients with 7 implant-related complications were found. One patient experienced breakage of the pyrocarbon head. In another patient, breakage of the stem and-after revision surgery-partial breakage were observed. Disassembly of the prosthesis was seen in 1 case. Extensive periprosthetic stress shielding was seen in 3 patients resulting in symptomatic loosening (1), periprosthetic radial neck fracture (1), and stem migration (1).

CONCLUSIONS

Whereas clinical short-term results of the MoPyC radial head prosthesis are satisfactory, rare implant-related complications can occur. Surgeons should be aware of these complications as they may lead to a poor outcome.

Traumatic Rupture of the Distal Triceps Tendon (A Series of 7 Cases)

Even non-traumatic ruptures of the triceps tendon are rare, surgical therapy should be recommended in all cases, because of poor results after non-operative treatment. A golden standard for the surgical procedure is not established. A small series of traumatic distal tendon ruptures was treated surgical in our hospital and was followed up after 12 months concerning their function. Very good and good results could be found with a strong reintegration of the tendon by using transosseus sutures with non resorbable suture material. The refixation with suture anchors showed disappointing results with early pull-outs of the anchor. Revision with screw augmentation with a washer had to be performed. Concerning the biomechanical forces, which show up on the olecranon (up to 40 NM), the refixation of the triceps tendon has proved to be extremely resistant against pull out forces. The good results by using non absorbable transosseus sutures led to a standardized procedure in our trauma center, even the rupture is not traumatic.

[Treatment of Mason type II radial head fractures by percutaneous reduction]

BACKGROUND

The therapeutic algorithm for the treatment of Mason type II radial head fractures is still controversially discussed. This study describes the technique of percutaneous fracture reduction without additional internal fixation of the radial head as an alternative to open reduction and presents the results of the method.

MATERIAL AND METHODS

The data from 26 out of 30 patients with a Mason type II radial head fracture who had been consecutively treated with percutaneous fracture reduction were evaluated retrospectively. The analysis comprised the disabilities of shoulder and hand (DASH) score, the Mayo elbow performance score (MEPS) and data from the radiological examinations.

RESULTS

The average follow-up time was 21 months (range 6-47 months). In 22 cases (85 %) an anatomical reduction could be achieved, 2 cases (8 %) showed a complete redislocation of the fragment and 2 cases (8 %) a partial redislocation. The average DASH score was 5.6 points (range 0-56) and the average MEPS was 93.8 (range 60-100). Only 4 patients (15 %) reported persisting functional impairment with a DASH score >10.

CONCLUSIONS

The method of percutaneous reduction of radial head fractures without additional internal fixation in Mason type II fractures has been demonstrated to be a good alternative to open reduction.

[Endoprosthetics of acute radial head fractures]

Radial head arthroplasty is the treatment of choice for non-reconstructble radial head fractures. Solid prostheses made of metal or pyocarbon can restore valgus stability of the elbow independent of design or stem fixation. Short-term and mid-term results show mostly good to excellent results without any evident differences between the different prosthesis philosophies. In order to obtain good results it is important to implant the prosthesis correctly without overfilling and to judge concomitant ligament injuries correctly. This article discusses the anatomical and biomechanical basis of radial head arthroplasty as well as the surgical technique and radiological diagnosis of overfilling.