Adjustment of web-building initiation to high humidity: a constraint by humidity-dependent thread stickiness in the spider Cyrtarachne

Investigating the Influence of Anthropogenic Activities on Behavioral Changes of an Orb Web Spider (Neoscona vigilans)

Orb web spiders are common and highly diversified animals found in almost all habitats. They have remarkable plasticity against biotic and abiotic factors, making them excellent indicators of environmental health. The web creation behavior of spiders is influenced by disturbances in the environment. The aim of this research was to observe the alteration in the web-building behavior of Neoscona vigilans caused by human activities, specifically traffic disturbances. Spider webs were located and photographed at nighttime along the roadside, and their web characteristics were calculated. Spiders were captured from webs for their body measurements. Spider fourth leg length, carapace width, and body length had a significant association with web size and diameter, CTL, capture area, and mesh size. The quantity of trapped prey, the height of the plant, and the foliage radius increased with the distance from the road. Conversely, anchor points and web elevation from the ground dropped. The highest and lowest proportions of anomalies (modifications/defects) were recorded as holes (52.7%) in 105 webs (100%) and supernumerary (0.7%) in 55 webs (52.4%), respectively. Road disturbance had a negative influence on the spider's behavior as the webs formed in close proximity to the road had a higher frequency of anomalies, with a gradual decrease distantly. We can gain further insight into how different environmental changes, disruptions, and pollutants lead to this imperfection in the otherwise flawless perfect structure of spider webs.

Special Prey, Special Glue: NMR Spectroscopy on Aggregate Glue Components of Moth-Specialist Spiders, Cyrtarachninae

Orb-weaver spiders produce upwards of seven different types of silk, each with unique material properties. We focus on the adhesive within orb-weaving spider webs, aggregate glue silk. These droplets are composed of three main components: water, glycoproteins, and a wide range of low molecular mass compounds (LMMCs). These LMMCs are known to play a crucial role in maintaining the material properties of the glycoproteins, aid in water absorption from the environment, and increase surface adhesion. Orb-weavers within the Cyrtarachninae subfamily are moth specialists and have evolved glue droplets with novel material properties. This study investigated the biochemical composition and diversity of the LMMCs present in the aggregate glue of eight moth-specialist species and compared them with five generalist orb-weavers using nuclear magnetic resonance (NMR) spectroscopy. We hypothesized that the novel drying ability of moth-specialist glue was accompanied by novel LMMCs and lower overall percentages by silk weight of LMMCs. We measured no difference in LMMC weight by the type of prey specialization, but observed novel compositions in the glue of all eight moth-catching species. Further, we quantified the presence of a previously reported but unidentified compound that appears in the glue of all moth specialists. These silks can provide insight into the functions of bioadhesives and inform our own synthetic adhesives.

Behavior and Bioadhesives: How Bolas Spiders, Mastophora hutchinsoni, Catch Moths

Spiders use various combinations of silks, adhesives, and behaviors to ensnare and trap prey. A common but difficult to catch prey in most spider habitats are moths. They easily escape typical orb-webs because their bodies are covered in sacrificial scales that flake off when in contact with the web's adhesives. This defense is defeated by spiders of the sub-family of Cyrtarachninae, moth-catching specialists who combine changes in orb-web structure, predatory behavior, and chemistry of the aggregate glue placed in those webs. The most extreme changes in web structure are shown by bolas spiders, who create a solitary capture strand containing only one or two glue droplets at the end of a single thread. They prey on male moths by releasing pheromones to draw them within range of their bolas, which they flick to ensnare the moth. We used a high-speed video camera to capture the behavior of the bolas spider Mastophora hutchinsoni. We calculated the kinematics of spiders and moths in the wild to model the physical and mechanical properties of the bolas during prey capture, the behavior of the moth, and how these factors lead to successful prey capture. We created a numerical model to explain the mechanical behavior of the bolas silk during prey capture. Our kinematic analysis shows that the material properties of the aggregate glue bolas of M. hutchinsoni are distinct from that of the other previously analyzed moth-specialist, Cyrtarachne akirai. The spring-like behavior of the M. hutchinsoni bolas suggests it spins a thicker liquid.

Mechanics of the Prey Capture Technique of the South African Grassland Bolas Spider, Cladomelea akermani

Spiders use various combinations of silks, adhesives, and behaviors to ensnare prey. One common but difficult-to-catch prey is moths. They easily escape typical orb-webs because their bodies are covered in tiny sacrificial scales that flake off when in contact with the web's adhesives. This defense is defeated by spiders of the sub-family of Cyrtarachninae-moth-catching specialists who combine changes in orb-web structure, predatory behavior, and chemistry of the aggregate glue placed in those webs. The most extreme changes in web structure are shown by the bolas spiders which create only one or two glue droplets at the end of a single thread. They prey on male moths by releasing pheromones to draw them close. Here, we confirm the hypothesis that the spinning behavior of the spider is directly used to spin its glue droplets using a high-speed video camera to observe the captured behavior of the bolas spider Cladomelea akermani as it actively spins its body and bolas. We use the kinematics of the spider and bolas to begin to quantify and model the physical and mechanical properties of the bolas during prey capture. We then examine why this species chooses to spin its body, an energetically costly behavior, during prey capture. We test the hypothesis that spinning helps to spread pheromones by creating a computational fluid dynamics model of airflow within an open field and comparing it to that of airflow within a tree, a common environment for bolas spiders that do not spin. Spinning in an open environment creates turbulent air, spreading pheromones further and creating a pocket of pheromones. Conversely, spinning within a tree does little to affect the natural airflow.

The moth specialist spider Cyrtarachne akirai uses prey scales to increase adhesion

Contaminants decrease adhesive strength by interfering with substrate contact. Spider webs adhering to moths present an ideal model to investigate how natural adhesives overcome contamination because moths' sacrificial layer of scales rubs off on sticky silk, facilitating escape. However, Cyrtarachninae spiders have evolved gluey capture threads that adhere well to moths. Cyrtarachne capture threads contain large glue droplets oversaturated with water, readily flowing but also prone to drying out. Here, we compare the spreading and adhesion of Cyrtarachne akirai glue on intact mothwings, denuded cuticle and glass to the glue of a common orb-weaving spider, Larinioides cornutus, to understand how C. akirai glue overcomes dirty surfaces. Videos show that C. akirai's glue spreading accelerates along the underlying moth cuticle after the glue seeps beneath the moth scales-not seen on denuded cuticle or hydrophilic glass. Larinioides cornutus glue droplets failed to penetrate the moth scales, their force of adhesion thus limited by the strength of attachment of scales to the cuticle. The large size and low viscosity of C. akirai glue droplets function together to use the three-dimensional topography of the moth's scales against itself via capillary forces. Infrared spectroscopy shows C. akirai glue droplets readily lose free-flowing water. We hypothesize that this loss of water leads to increased viscosity during spreading, increasing cohesive forces during pull-off. This glue's two-phase behaviour shows how natural selection can leverage a defensive specialization of prey against themselves and highlights a new design principle for synthetic adhesives for adhering to troublesome surfaces.

Biomechanical properties of fishing lines of the glowworm Arachnocampa luminosa (Diptera; Keroplatidae)

Animals use adhesive secretions in highly diverse ways, such as for settlement, egg anchorage, mating, active or passive defence, etc. One of the most interesting functions is the use of bioadhesives to capture prey, as the bonding has to be performed within milliseconds and often under unfavourable conditions. While much is understood about the adhesive and biomechanical properties of the threads of other hunters such as spiders, barely anything is documented about those of the New Zealand glowworm Arachnocampa luminosa. We analysed tensile properties of the fishing lines of the New Zealand glowworm Arachnocampa luminosa under natural and dry conditions and measured their adhesion energy to different surfaces. The capture system of A. luminosa is highly adapted to the prevailing conditions (13-15 °C, relative humidity of 98%) whereby the wet fishing lines only show a bonding ability at high relative humidity (>80%) with a mean adhesive energy from 20-45 N/m and a stronger adhesion to polar surfaces. Wet threads show a slightly higher breaking strain value than dried threads, whereas the tensile strength of wet threads was much lower. The analyses show that breaking stress and strain values in Arachnocampa luminosa were very low in comparison to related Arachnocampa species and spider silk threads but exhibit much higher adhesion energy values. While the mechanical differences between the threads of various Arachnocampa species might be consequence of the different sampling and handling of the threads prior to the tests, differences to spiders could be explained by habitat differences and differences in the material ultrastructure. Orb web spiders produce viscid silk consisting of β-pleated sheets, whereas Arachnocampa has cross-β-sheet crystallites within its silk. As a functional explanation, the low tear strength for A. luminosa comprises a safety mechanism and ensures the entire nest is not pulled down by prey which is too heavy.

Supersaturation with water explains the unusual adhesion of aggregate glue in the webs of the moth-specialist spider, Cyrtarachne akirai

Orb webs produced by araneoid spiders depend upon aggregate glue-coated capture threads to retain their prey. Moths are challenging prey for most spiders because their scales detach and contaminate the glue droplets, significantly decreasing adhesion. Cyrtarachne are moth-specialist orb-weaving spiders whose capture threads adhere well to moths. We compare the adhesive properties and chemistry of Cyrtarachne aggregate glue to other orb-weaving spiders to test hypotheses about their structure, chemistry and performance that could explain the strength of Cyrtarachne glue. We show that the unusually large glue droplets on Cyrtarachne capture threads make them approximately 8 times more adhesive on glass substrate than capture threads from typical orb-weaving species, but Cyrtarachne adhesion is similar to that of other species after normalization by glue volume. Glue viscosity reversibly changes over 1000-fold in response to atmospheric humidity, and the adhesive strength of many species of orb spiders is maximized at a viscosity of approximately 10⁵-10⁶ cst where the contributions of spreading and bulk cohesion are optimized. By contrast, viscosity of Cyrtarachne aggregate glue droplets is approximately 1000 times lower at maximum adhesive humidity, likely facilitating rapid spreading across moth scales. Water uptake by glue droplets is controlled, in part, by hygroscopic low molecular weight compounds. NMR showed evidence that Cyrtarachne glue contains a variety of unknown low molecular weight compounds. These compounds may help explain how Cyrtarachne produces such exceptionally large and low viscosity glue droplets, and also why these glue droplets rapidly lose water volume after brief ageing or exposure to even slightly dry (e.g. < 80% RH) conditions, permanently reducing their adhesion. We hypothesize that the combination of large glue droplet size and low viscosity helps Cyrtarachne glue to penetrate the gaps between moth scales.

Silk structure rather than tensile mechanics explains web performance in the moth-specialized spider, Cyrtarachne

Orb webs intercept and retain prey so spiders may subdue them. Orb webs are composed of sticky, compliant spirals of capture silk spun across strong, stiff major ampullate silk threads. Interplay between differences in the mechanical properties of these silks is crucial for prey capture. Most orb webs depend upon insects contacting several radial and capture threads for successful retention. Moths, however, escape quickly from most orb webs due to the sacrificial scales covering their bodies. Cyrtarachne orb webs are unusual as they contain a reduced number of capture threads and moths stick unusually well to single threads. We aimed to determine how the tensile properties of the capture spiral and radial threads spun by Cyrtarachne operate in retention of moth prey. A NanoBionix UTM was used to quantify the material properties of flagelliform and major ampullate threads to test if Cyrtarachne's reduced web architecture is accompanied by improvements in tensile performance of its silk. Silk threads showed tensile properties typical of less-specialized orb-weavers, with the exception of high extensibility in radial threads. Radial thread diameters were 62.5% smaller than flagelliform threads, where commonly the two are roughly similar. We utilized our tensile data to create a finite element model of Cyrtarachne's web to investigate energy dissipation during prey impact. Large cross-sectional area of the flagelliform threads played a key role in enabling single capture threads to withstand prey impact. Rather than extraordinary silk, Cyrtarachne utilizes structural changes in the size and attachment of silk threads to facilitate web function.

Hygroscopic compounds in spider aggregate glue remove interfacial water to maintain adhesion in humid conditions

Adhesion in humid environments is fundamentally challenging because of the presence of interfacial bound water. Spiders often hunt in wet habitats and overcome this challenge using sticky aggregate glue droplets whose adhesion is resistant to interfacial failure under humid conditions. The mechanism by which spider aggregate glue avoids interfacial failure in humid environments is still unknown. Here, we investigate the mechanism of aggregate glue adhesion by using interface-sensitive spectroscopy in conjunction with infrared spectroscopy. We demonstrate that glycoproteins act as primary binding agents at the interface. As humidity increases, we observe reversible changes in the interfacial secondary structure of glycoproteins. Surprisingly, we do not observe liquid-like water at the interface, even though liquid-like water increases inside the bulk with increasing humidity. We hypothesize that the hygroscopic compounds in aggregate glue sequester interfacial water. Using hygroscopic compounds to sequester interfacial water provides a novel design principle for developing water-resistant synthetic adhesives.

Spider aggregate glue avoids failure in humid environments but the fundamental mechanism behind it is still unknown. Here, the authors demonstrate that humidity-dependent structural changes of glycoproteins and sequestering of liquid water by low molecular mass compounds prevents adhesion failure of the glue in humid environments.

Extended spider cognition

There is a tension between the conception of cognition as a central nervous system (CNS) process and a view of cognition as extending towards the body or the contiguous environment. The centralised conception requires large or complex nervous systems to cope with complex environments. Conversely, the extended conception involves the outsourcing of information processing to the body or environment, thus making fewer demands on the processing power of the CNS. The evolution of extended cognition should be particularly favoured among small, generalist predators such as spiders, and here, we review the literature to evaluate the fit of empirical data with these contrasting models of cognition. Spiders do not seem to be cognitively limited, displaying a large diversity of learning processes, from habituation to contextual learning, including a sense of numerosity. To tease apart the central from the extended cognition, we apply the mutual manipulability criterion, testing the existence of reciprocal causal links between the putative elements of the system. We conclude that the web threads and configurations are integral parts of the cognitive systems. The extension of cognition to the web helps to explain some puzzling features of spider behaviour and seems to promote evolvability within the group, enhancing innovation through cognitive connectivity to variable habitat features. Graded changes in relative brain size could also be explained by outsourcing information processing to environmental features. More generally, niche-constructed structures emerge as prime candidates for extending animal cognition, generating the selective pressures that help to shape the evolving cognitive system.

Experimental evidence that high humidity is an essential cue for web building in Pasilobus spiders

Spiders in the subfamily Cyrtarachninae, including bolas spiders, are moth specialists, and it has been suggested that these spiders initiate web-weaving under high humidity. Here we used Pasilobus hupingensis to experimentally test whether Cyrtarachninae spiders build webs exclusively under high humidity. The results showed that humidity, as well as temperature and prey feeding history, affected web-building probability, but humidity had a much stronger effect. Moreover, spiders never constructed webs at under <70% humidity. We suggest that a mechanical property in sticky materials derived from moth specialization; namely, unusually high, yet rapidly degrading stickiness, is likely to have promoted the evolution of plastic foraging behaviour that varies with humidity.

Molecular phylogeny of moth-specialized spider sub-family Cyrtarachninae, which includes bolas spiders

The evolutionary process of the unique web architectures of spiders of the sub-family Cyrtarachninae, which includes the triangular web weaver, bolas spider, and webless spider, is thought to be derived from reduction of orbicular 'spanning-thread webs' resembling ordinal orb webs. A molecular phylogenetic analysis was conducted to explore this hypothesis using orbicular web spiders Cyrtarachne, Paraplectana, Poecilopachys, triangular web spider Pasilobus, bolas spiders Ordgarius and Mastophora, and webless spider Celaenia. The phylogeny inferred from partial sequences of mt-COI, nuclear 18S-rRNA and 28S-rRNA showed that the common ancestor of these spiders diverged into two clades: a spanning-thread web clade and a bolas or webless clade. This finding suggests that the triangular web evolved by reduction of an orbicular spanning web, but that bolas spiders evolved in the early stage, which does not support the gradual web reduction hypothesis.