How do the substrate reaction forces acting on a gecko's limbs respond to inclines?

The Neural Control Mechanisms of Gekkonid Adhesion Locomotion: The Effect of Spinal Cord Lesions

Objective: the role of the supraspinal system in the neural control mechanisms of adhesion locomotor pattern formation was studied in lizard Gekko gecko. Methods: the locomotor performance and adaptation of the chronically lesioned Gekko gecko was documented before and after either partial or complete spinal lesions. They were filmed moving on a flat and smooth platform that was inclined at 0°, ±45°, and ±90°, as well as the horizontal mats and the vertical oak background board in the terraria, to evaluate locomotor functional recovery. The geckos were also tested on the platform by two half and nose-up or -down rotations in steps of 15° throughout 180° to investigate the recovery of the ability to respond dynamically to external perturbations. Results: after relatively small lesions of a hemisection, the locomotor performance was largely indistinguishable from that before and after a sham operation. During the initial period of recovery after the largest lesions of a dorsal or a ventral hemisection within 1 wk, the geckos behaved essentially as the complete spinal geckos, while permanent deficits in locomotor performance remained and did not decrease afterwards for ≥6 mth. Conclusions: by analyzing the correlation among locomotor performances, and between locomotor performances and spinal cord lesions, we suggest that the dorsal spinal pathways and ventral spinal pathways participate, respectively, in the control of the limb coupling, and in the deployment and the detachment of the adhesive apparatus. The present study will provide certain neurobiological guidance for the design of bio-robots, as well as sprawling robots inspired by the geckos.

Using a biologically mimicking climbing robot to explore the performance landscape of climbing in lizards

Locomotion is a key aspect associated with ecologically relevant tasks for many organisms, therefore, survival often depends on their ability to perform well at these tasks. Despite this significance, we have little idea how different performance tasks are weighted when increased performance in one task comes at the cost of decreased performance in another. Additionally, the ability for natural systems to become optimized to perform a specific task can be limited by structural, historic or functional constraints. Climbing lizards provide a good example of these constraints as climbing ability likely requires the optimization of tasks which may conflict with one another such as increasing speed, avoiding falls and reducing the cost of transport (COT). Understanding how modifications to the lizard bauplan can influence these tasks may allow us to understand the relative weighting of different performance objectives among species. Here, we reconstruct multiple performance landscapes of climbing locomotion using a 10 d.f. robot based upon the lizard bauplan, including an actuated spine, shoulders and feet, the latter which interlock with the surface via claws. This design allows us to independently vary speed, foot angles and range of motion (ROM), while simultaneously collecting data on climbed distance, stability and efficiency. We first demonstrate a trade-off between speed and stability, with high speeds resulting in decreased stability and low speeds an increased COT. By varying foot orientation of fore- and hindfeet independently, we found geckos converge on a narrow optimum of foot angles (fore 20°, hind 100°) for both speed and stability, but avoid a secondary wider optimum (fore -20°, hind -50°) highlighting a possible constraint. Modifying the spine and limb ROM revealed a gradient in performance. Evolutionary modifications in movement among extant species over time appear to follow this gradient towards areas which promote speed and efficiency.

Role of multiple, adjustable toes in distributed control shown by sideways wall-running in geckos

Remarkable progress has been made characterizing one of nature's most integrated, hierarchical structures--the fibrillar adhesive system of geckos. Nonetheless, we lack an understanding of how multiple toes coordinate to facilitate geckos' acrobatic locomotion. Here, we tested the control function of gecko toes by running them on vertical substrates varying in orientation, friction and roughness. Sideways wall-running geckos realigned the toes of their top feet upward to resist gravity. Toe contact area was not compromised, but redistributed. Geckos aligned all toes upward to resist slipping when encountering low-friction patches during sideways wall-running. Negotiation of intermittent slippery strips showed an increased contribution of particular toes to compensate for toes that lost adhesion. Increasing substrate roughness using discrete rods perpendicular to sideways locomotion resulted in geckos bending and/or rotating toes to conform to and even grasp the rods, with potential forces more than five times body weight. Geckos increase their effectiveness of manoeuvrability in demanding environments by taking advantage of the distributed control afforded by multiple toes. Our findings provide insight on biological attachment and offer inspiration to advance gecko-inspired robotics and other biomimetic applications.

The Method of Multi-Camera Layout in Motion Capture System for Diverse Small Animals

Motion capture based on multi-camera is widely used in the quantification of animal locomotor behaviors and this is one of the main research methods to reveal the physical laws of animal locomotion and to inspire the design and realization of bionic robot. It has been found that the multi-camera layout patterns greatly affect the effect of motion capture. Due to the researches for animals of diverse species, determining the most appropriate layout patterns to achieve excellent capture performance remains an unresolved challenge. To improve the capturing accuracy, this investigation focuses on the method of multi-camera layout as a motion capture system for diverse animals with significant differences in outward appearance characteristics and locomotor behaviors. The demand boundaries of motion capture are determined according to the appearance types (shapes and space volume) and the behavior characteristics of the animals, resulting in the matching principle of the typical multi-camera layout patterns (arch, annular and half-annular) with diverse animals. The results of the calibration experiments show that the average standard deviation rate (ASDR) of multi-camera system in the half-annular layout patterns (0.52%) is apparently smaller than that of the other two patterns, while its intersecting volume is the largest among the three patterns. The ASDR at different depths of field in a half-annular layout demonstrate that the greater depth of field is conducive to improving the precision of the motion capture system. Laboratory experiments of the motion capture for small animals (geckos and spiders) employed the multi-camera system locked in the 3-D force measuring platform in a half-annular layout pattern indicate that the ASDR of them could reach less than 3.8% and their capturing deviation rate (ACDR) are respectively 3.43% and 1.74%. In this report, the correlations between the motion capture demand boundaries of small animals and the characteristics of the multi-camera layout patterns were determined to advance the motion capture experimental technology for all kinds of small animals, which can provide effective support for the understanding of animal locomotion.

The evolution of vertical climbing in primates: evidence from reaction forces

Vertical climbing is an essential behavior for arboreal animals, yet limb mechanics during climbing are poorly understood and rarely compared with those observed during horizontal walking. Primates commonly engage in both arboreal walking and vertical climbing, and this makes them an ideal taxa in which to compare these locomotor forms. Additionally, primates exhibit unusual limb mechanics compared with most other quadrupeds, with weight distribution biased towards the hindlimbs, a pattern that is argued to have evolved in response to the challenges of arboreal walking. Here we test an alternative hypothesis that functional differentiation between the limbs evolved initially as a response to climbing. Eight primate species were recorded locomoting on instrumented vertical and horizontal simulated arboreal runways. Forces along the axis of, and normal to, the support were recorded. During walking, all primates displayed forelimbs that were net braking, and hindlimbs that were net propulsive. In contrast, both limbs served a propulsive role during climbing. In all species, except the lorisids, the hindlimbs produced greater propulsive forces than the forelimbs during climbing. During climbing, the hindlimbs tends to support compressive loads, while the forelimb forces tend to be primarily tensile. This functional disparity appears to be body-size dependent. The tensile loading of the forelimbs versus the compressive loading of the hindlimbs observed during climbing may have important evolutionary implications for primates, and it may be the case that hindlimb-biased weight support exhibited during quadrupedal walking in primates may be derived from their basal condition of climbing thin branches.